contents
 Overview      Standard Features (Server Blade)      Standard Features (Server Blade Enclosure and Interconnects)      Standard Features (Power System and Rack Information)      Standard Features      Models      Options      Memory      Technical Specifications line.gif (50 bytes)

Overview

HP ProLiant BL20p Generation 2 (G2) Server Blade

42U Rack with HP ProLiant BL20p G2 System Installed
1.
 BL p-Class interconnects (2) in BL p-Class server blade enclosure (interconnect switch shown)
2.
 HP ProLiant BL20p G2 server blades (8) in BL p-Class server blade enclosure
3.
 HP BladeSystem p-Class 3U enclosure with hot-plug power supplies (6)
What's New
  • New HP BladeSystem p-Class 1U Power Enclosure
  • The HP BladeSystem Management Suite is delivered in a convenient to purchase pack which includes a BL p-Class Server Blade Enclosure, a single copy of Systems Insight Manager (SIM) and 8 licenses for each of the following products: Rapid Deployment Pack (RDP), Performance Management Pack (PMP) and the Vulnerability and Patch Management Pack (VPM)
At A Glance
  • Performance dual processor server blade designed with enterprise availability
  • HP ProLiant BL20p Generation 2 server blade includes:
  • Intel Xeon 3.2 GHz-2MB, 3.2 GHz-1MB, 3.06 GHz-1MB, 3.06 GHz- 512KB, 2.8 GHz-1MB, or 2.8 GHz- 512KB processor (dual capability) with Hyper-Threading Technology
  • Dual Port Fibre Channel Mezzanine Card (2-Gb) option for SAN connectivity
  • ServerWorks GC-LE chipset
  • 512-MB or 1024-MB PC2100-MHz Registered ECC DDR memory, (2 x 1 Interleaved Memory), expandable to 8 GB
  • Three NC7781 PCI-X Gigabit NICs (embedded)
  • One additional 10/100 NIC dedicated to iLO Management
  • Smart Array 5i Plus Controller with optional battery-backed write cache (integrated on system board)
  • Wide Ultra3 SCSI Drive Cage standard supports up to two 1" Wide Ultra3 hot plug hard drives
  • Integrated Lights-Out (iLO) Advanced Management (ASIC on motherboard)
  • New Power Regulator for ProLiant delivering server level, policy based power management with industry leading energy efficiency and savings on system power and cooling costs.
  • Integrated Lights-Out featuring new firmware v 1.70 with support for Power Regulator for ProLiant and introducing support for the draft DMTF System Management Architecture for Server Hardware Command Line Protocol standard
  • Plugs vertically into 6U enclosure
  • New I/O cable with two USB ports, one video port, one iLO port and kernel debug port. The cable was specifically designed to aid in initial server image deployment. The cable ships with all 2.8GHz/1M models and above.
  • Cisco GESM and GbE2 Interconnect Switch option for Gigabit Ethernet network adapter consolidation
  • New Power Regulator for ProLiant delivering server level, policy based power management with industry leading energy efficiency and savings on system power and cooling costs
  • Integrated Lights-Out featuring new firmware v 1.70 with support for Power Regulator for ProLiant and introducing support for the draft DMTF System Management Architecture for Server Hardware Command Line Protocol standard
  • New Power Regulator for ProLiant delivering server level, policy based power management with industry leading energy efficiency and savings on system power and cooling costs
  • Integrated Lights-Out featuring new firmware v 1.70 with support for Power Regulator for ProLiant and introducing support for the draft DMTF System Management Architecture for Server Hardware Command Line Protocol standard
  • Integrated Access Tool for blade management and enhanced server blade documentation including Best Practices and Common Procedures guides
  • Up to 48 HP ProLiant BL20p G2 server blades fit in 42U rack
  • HP BladeSystem p-Class Server Blade Enclosure:
    • Server blades and interconnects blind mate into server blade enclosures for network connection and power
    • Server blade enclosure is 6U and holds up to 8 HP ProLiant BL20p G2 server blades and 2 interconnects
    • Types of interconnects available: GbE Interconnect Switches, CGESM and GbE2 Interconnect Switches with optional Fibre Channel pass through, Patch Panels or Patch Panel 2 with Fibre Channel pass through
  • HP BladeSystem p-Class Power Enclosure:
    • Use BL p-Class sizing tool to determine power based on your configuration
      http://h30099.www3.hp.com/configurator/calc/Power%20Calculator%20Catalog.xls.
    • BL p-Class power enclosure provides shared, external, redundant power
    • Power enclosure is 3U and holds up to 6 hot-plug power supplies
    • Choose single-phase or three-phase power
    • BL p-Class power enclosure with power supplies not needed if using facility -48VDC ± 10% in this case purchase DC option kit
  • HP BladeSystem p-Class Power Distribution:
    • Distributes power from the power enclosure to the server blade enclosures
    • Three power distribution choices:
    • BL p-Class scalable bus bar
    • BL p-Class mini bus bar
    • BL p-Class power bus box
  • BL p-Class server blade, server blade enclosure, interconnects and power enclosure protected by a limited three year warranty with optional service uplifts available
  • NOTE: Power requirements for a ProLiant BLp-Class system: 200V - 240V AC, 30 amp or facility DC -48V ± 10%.
HP ProLiant BL20p G2 Server Blade

+
BL p-Class Server Blade Enclosure

+
OR
Patch Panel (shown) or
Patch Panel 2
  
GbE Interconnect Switch (shown) or GbE2 Interconnect Switch
(fiber or copper-based)
BL p-Class Interconnects
+
BL p-Class power enclosures and power supplies
 
OR
HP BladeSystem p-Class 1U power enclosure and power supplies


OR
Facility DC
OR
OR
Mini bus bar
Bus boxes
     
Scalable bus bar
      
Dual power input kit for mini bus bar
BL p-Class power distribution
Configuration Steps
  • For a complete configuration of the HP ProLiant BL20p G2 server blade, do the following:
  1. Select BL p-Class server blade(s):

    PLUS

  2. Decide how many BL p-Class Server Blade Enclosures to purchase (each enclosure can hold up to 8 HP ProLiant BL20p G2 server blades):
    HP BladeSystem p-Class server blade enclosure with 8 Rapid Deployment Pack licenses (281404-B21)
    Or
    HP BladeSystem p-Class server blade enclosure with Rapid Deployment Pack trial (243564-B21)
    Or
    HP BladeSystem p-Class server blade enclosure with enhanced backplane components with 8 Rapid Deployment Pack licenses (281404-B22)
    Or
    HP BladeSystem p-Class server blade enclosure with enhanced backplane components with 8 Rapid Deployment Pack trial
    (243564-B22)
    Or
    HP BladeSystem p-Class server blade enclosure with the HP BladeSystem Management Suite which is delivered in a convenient to purchase pack that includes a single copy of Systems Insight Manager (SIM) and 8 licenses for each of the following products: Rapid Deployment Pack (RDP), Performance Management Pack (PMP) and the Vulnerability and Patch Management Pack (VPM).(380625-B22)
    Or
    Optional HP BladeSystem p-Class Server Blade Enclosure Upgrade Kit (354100-B21)
    NOTE: Server Blade Enclosure upgrade kit (354100-B21 contains enhanced backplane components and enables a field upgrade support BL p-Class blades and provide a single, physical iLO port for the enclosure)

    PLUS

  3. Select an Interconnect Kit. Most Interconnect Kits contain a pair of interconnects. The Cisco Gigabit Ethernet Switch Module Interconnect Kit contains a single switch. One pair of interconnects is required with each ProLiant BL p-Class server blade enclosure:
    RJ-45 Patch Panel 2 with Fibre Channel pass through (required for Fibre Channel connectivity on HP ProLiant BL20p G2 when using the patch panel interconnect) (306465-B21)
    Or
    RJ-45 Patch Panel (230766-B21)
    Or
    Quantity (2) Cisco Gigabit Switch Module for HP BladeSystem p-Class Interconnect Kit (with 16 10/100/1000 T/TX/T downlink ports, 2 RJ-45 10/100/1000 T/TX/T uplink ports, and 4 SFP ports) (378926-B21), with or without any combination of up to 4 10/100/1000 T/TX/T RJ-45 SFP Module (378928-B21) or 1000BASE SX Fiber SFP Module (378929-B21), with or without ProLiant BL p-Class Storage Connectivity Kit (with 16 Fibre Channel connectors) (321745 -B21) (required for ProLiant BLxxp xx Fibre Channel connectivity when using the CGESM Interconnect Switch)
    Or
    Quantity (2) Cisco Gigabit Switch Module for HP BladeSystem p-Class Interconnect Kit (with 16 10/100/1000 T/TX/T downlink ports, 2 RJ-45 10/100/1000 T/TX/T uplink ports, and 4 SFP ports populated with 2 10/100/1000 T/TX/T SFP modules) (378927-B21), with or without optional ProLiant BL p-Class Storage Connectivity Kit (with 16 Fibre Channel connectors) (321745 -B21) (required for ProLiant BLxxp xx Fibre Channel connectivity when using the CGESM Interconnect Switch)
    Or
    BL p-Class C-GbE2 Interconnect Kit (with 16 10/100/1000 T/TX/T downlink ports, 6 RJ-45 10/100/1000 T/TX/T uplink ports ) (283192-B21), with or without optional ProLiant BL p-Class Storage Connectivity Kit (with 16 Fibre Channel connectors) (321745 -B21) (required for ProLiant BLxxp xx Fibre Channel connectivity when using the GbE2 Interconnect Switch) Or
    BL p-Class F-GbE2 Interconnect (with 16 10/100/1000 T/TX/T downlink ports, 4 LC 1000 SX and 2 RJ-45 10/100/1000 T/TX/T uplink ports) (283193-B21), with or without optional ProLiant BL p-Class Storage Connectivity Kit (with 16 Fibre Channel connectors) (321745 -B21) (required for ProLiant BLxxp xx Fibre Channel connectivity when using the GbE2 Interconnect Switch)
    Or
    BL p-Class C-GbE Interconnect Kit (with 4 RJ-45 10/100/1000 T/TX/T uplink ports and 16 RJ-45 10/100 T/TX downlink ports (249655-B21)
    Or
    BL p-Class F-GbE Interconnect Kit (with 4 LC 1000 SX uplink ports and 16 RJ-45 10/100 T/TX downlink ports) (279720-B21)

    PLUS

  4. Select BL p-Class power enclosure and power supplies based on configuration. Use p-Class sizing tool to help determine power configuration: http://h30099.www3.hp.com/configurator/calc/Power%20Calculator%20Catalog.xls.
    NOTE: Power enclosures and supplies are not needed if using facility DC (-48V ± 10%).
    Single phase power enclosure with four power supplies (Single-phase power enclosure holds a max of four power supplies) (NA/JPN- 239162-001) (INTL - 239162-421)
    Or
    Three-phase power enclosure with six power supplies (Three-phase power enclosure holds a max of six power supplies) (NA/JPN- 230769-001) (INTL - 230769-421)
    (Power enclosures and supplies can also be purchased separately see options list)
    Or
    1U Power Enclosure with six power supplies (378284-B21)
    Or
    1U Power Enclosure with two power supplies (380314-B21)
    NOTE: Additional power supplies can also be purchased separately - please see options list)

    PLUS

    Select power distribution:
    Scalable bus bar - Supports up to 5 server blade enclosures* (240560-B21)
    Or
    Mini bus bar - Supports up to 3 server blade enclosures* (240559-B21)
    Or
    Power Bus Box - Supports only 1 server blade enclosure* (240562-B21)
    Or
    HP Modular Distribution Unit 40 Amp (NA/JPN) (P/N 252663-D75)**
    Or
    HP Modular Distribution Unit 40 Amp (Int'l) (P/N 252663-B34)**
    Or
    HP Modular Distribution Unit 32 Amp (Int'l) (P/N 252662-B33)**
    Or
    HP Modular Distribution Unit 24 Amp (NA/JPN) (P/N 252663-D74)**
    *NOTE: Maximum depends upon power input
    **NOTE: The Modular Distribution Unit Kits excludes the extension bars as they are not required with the HP BladeSystem p-class 1U power enclosure
contents
 Overview      Standard Features (Server Blade)      Standard Features (Server Blade Enclosure and Interconnects)      Standard Features (Power System and Rack Information)      Standard Features      Models      Options      Memory      Technical Specifications line.gif (50 bytes)

Standard Features (Server Blade)
Processor Intel Xeon processor 3.2 GHz/533 MHz - 2MB
Intel Xeon processor 3.2 GHz/533 MHz - 1MB
Intel Xeon processor 3.06 GHz/533 MHz - 1MB
Intel Xeon Processor 3.06 GHz/533 MHz - 512KB
Intel Xeon Processor 2.8 GHz/533 MHz - 512KB
Upgradeability Upgradeable to dual processing
Cache Memory
One of the following depending
on Model
2-MB Level 3 Cache
1-MB Level 3 Cache
512-KB Level 2 Cache
ChipsetServerWorks GC-LE chipset
NOTE: For more information regarding ServerWorks, please see the following URL:
http://www.serverworks.com/products/overview.html.
Memory Type 2-way interleaved PC2100 DDR SDRAM running at 266MHz
  Standard 1024 MB
(depending on model)		 (2 x 512-MB
  Maximum 8 GB
  Standard 512 MB,
(depending on model)		 (2 x 256-MB)
  Maximum 8 GB
NOTE: Memory must be installed in pairs.
Network Adapter Four network adapters total:
Three NC7781 PCI-X Gigabit NICs (embedded) with WOL and PXE
One 10/100 iLO NIC dedicated to management
Manageability Integrated Lights-Out (iLO) Management Advanced (ASIC on the System Board)
Internal Storage Hard Drives None ship standard
Maximum Internal Storage SCSI 293.6GB (2 x 146.8 GB)
Fiber Channel on the
HP ProLiant BL20p
G2 server blade
 The following items are needed to connect the HP ProLiant BL20p G2 server blade to the SAN:
1. HP ProLiant BL 20p G2 server blade with Dual-port Fibre Channel Mezzanine Card installed
 
  • The Dual-port Fibre Channel Mezzanine Card is compatible with the new ProLiant BL20p G2 (cannot be used for ProLiant BL20p)
  • Two ports on each Dual-port Fibre Channel Mezzanine Card provide a redundant Fibre Channel connection to each server blade
  • Supports up to 2 Gb/s Fibre Channel equipment
  • Uses the QLogic chipset
  • Includes two small form factor pluggable transceivers with LC connectors for installation into the Patch Panel 2, CGESM or GbE2 Interconnect Switch (with the Storage Connectivity Kit)
  • The ProLiant BL20p G2 can be ordered with the Dual-port Fibre Channel Mezzanine Card installed or the Dual-port Fibre Channel Mezzanine Card Option Kit can be ordered separately.
    and
 2A. BL p-Class Patch Panel 2 (with Fibre Channel pass through) interconnect option
 
  • Allows pass through of both LAN and SAN signals
  • LAN Ethernet signals exit out the rear of the RJ-45 Patch Panel G2; SAN Fibre Channel signals exit out the front of the RJ-45 Patch Panel G2
    8 Fibre Channel small form factor pluggable (SPF) transceiver slots on the front of each RJ-45 patch panel 2 (16 Fibre Channel connections per server blade enclosure); for insertion of SPF transceivers included with the HP ProLiant BL20p G2 Dual-port Fibre Channel Mezzanine Card
    or
  2B. BL p-Class C-GbE2 or F-GbE2 Interconnect Kit plus the optional Storage Connectivity Kit
 
  • Allows LAN signal consolidation and pass through of HP ProLiant BL20p G2 Fibre Channel signals
  • Both LAN Ethernet signals and SAN Fibre Channel signals exit out the rear of the GbE2 or CGESM Interconnect Switch (with the Storage Connectivity Kit option) via dedicated modular interconnect modules
  • 8 Fibre Channel small form factor pluggable (SPF) transceiver slots on the back of each GbE2 or CGESM Interconnect Switch (16 Fibre Channel SPF slots per server blade enclosure)
  • SPF transceivers are included with the HP ProLiant BL20p G3 Dual-port Fibre Channel Adapter
    and
 3. Compatible SAN
 
Expansion Slots No PCI slots all features are integrated
I/O cable connectors:
(2)USB ports, (1) video port, (1) iLO port and (1) kernel debug port
(2) I/O cables ship with every server blade enclosure
Tested USB devices (keyboard, mouse, floppy) are listed in options section of this QuickSpecs
contents
 Overview      Standard Features (Server Blade)      Standard Features (Server Blade Enclosure and Interconnects)      Standard Features (Power System and Rack Information)      Standard Features      Models      Options      Memory      Technical Specifications line.gif (50 bytes)

Standard Features (Server Blade Enclosure and Interconnects)
HP BladeSystem p-Class Server Blade Enclosure and Interconnects
HP BladeSystem
p-Class Server Blade Enclosure
 6U (10.5-inch), 19-inch wide
Holds up to 8 HP ProLiant BL20p G2 servers blades

10 bays per server blade enclosure 8 bays for server blades

2 outside bays for interconnect modules (RJ-45 Patch Panel, RJ-45 Patch Panel 2, GbE Interconnect Switch, GbE2 or CGESM Interconnect Switch)
Server blades blind mate into the server blade enclosure backplane for power and data connections
Up to 6 BL p-Class 6U server blade enclosures fit in a 42U rack
NOTE: Server Blade Enclosure Upgrade Kit (354100-B21) contains enhanced backplane components and enables a field upgrade of a blade enclosure to support specific HP ProLiant BL20p G3 server blade models and provide a single, physical iLO port for the enclosure.
Server blade management module attached to the back of each BL p-Class 6U server blade enclosure to report events all servers and provide asset and inventory information
HP BladeSystem
p-Class Power Requirements
 Redundant 200V - 240V AC, 30 amp single-phase for NA and International
Redundant 208V 30amp 3-phase 4 wire, NA
Redundant 380 - 415V 20A 3-phase 5 wire, Intl
Redundant -48VDC ± 10%

HP BladeSystem
p-Class Interconnect Switch Option

(Every HP BladeSystem p-Class server blade enclosure requires two interconnect switches OR two RJ-45 patch panels)


The Cisco Gigabit Ethernet Switch Module (CGESM) Interconnect Kit () are for applications that require network adapter consolidation to 1000 Mbps (Gigabit Ethernet) in a Cisco infrastructure. The CGESM supports the same and BL35p Fibre Channel pass-through as the GbE2.

  • The Cisco Gigabit Ethernet Switch Module Interconnect kit includes one CGESM Interconnect Switch or one CGESM Interconnection Switch populated with two (2) RJ-45 10/100/1000 T/TX/T Small Form Factor Pluggable (SFP) Modules.
  • Quantity 2 Cisco Gigabit Ethernet Switch Module Interconnect kits provide two CGESM Interconnect Switches providing any combination of up to twelve (12) RJ-45 10/100/1000 T/TX/T or Fiber SX external ports per server blade enclosure.

The optional ProLiant BL p-Class Storage Connectivity Kit (321745 -B21) is required for BL35p Fibre Channel pass-through when using the CGESM Interconnect Kit.
The interconnect switches provide up to a 32 to 1 server networking cable reduction per server enclosure depending on the mix of HP ProLiant BL20p, HP ProLiant BL20p G2, HP ProLiant BL20pG3, and HP ProLiant BL40p server blades. Each interconnect switch (two per enclosure) reduces up to sixteen internal server network (NIC) ports to six external ports (four on a modular rear mounting interconnect module and two on the switch front panel). This provides a total of twelve external ports per server blade enclosure. Only one to all twelve external ports may be used per server blade enclosure.

The GbE2 Interconnect Kits (C-GbE2 and F-GbE2) are for applications that require network adapter consolidation to 1000 Mbps (Gigabit Ethernet) and BL25p Fibre Channel pass-through.

  • The ProLiant BL p-Class F-GbE2 Interconnect Kit includes two GbE2 Interconnect Switches and two QuadSX Interconnect Modules that provide eight (8) LC 1000 SX and four (4) RJ-45 10/100/1000 T/TX/T external ports per server blade enclosure.
  • The ProLiant BL p-Class C-GbE2 Interconnect Kit includes two GbE2 Interconnect Switches and two QuadT2 Interconnect Modules that provide twelve (12) RJ-45 10/100/1000 T/TX/T external ports per server blade enclosure.
  • The optional ProLiant BL p-Class Storage Connectivity Kit (321745 -B21) is required for BL25p Fibre Channel pass-through when using either the C-GbE2 or F-GbE2 Interconnect Kit.
The GbE Interconnect Kits (C-GbE and F-GbE) are for applications that require network adapter consolidation to 100 Mbps (Fast Ethernet).
  • The ProLiant BL p-Class F-GbE Interconnect Kit includes two GbE Interconnect Switches and two DualTSX Interconnect Modules that provide four (4) LC 1000 SX and eight (8) RJ-45 10/100 T/TX external ports per server blade enclosure.
  • The ProLiant BL p-Class C-GbE Interconnect Kit includes two GbE Interconnect Switches and two QuadT Interconnect Modules that provide four (4) RJ-45 10/100/1000 T/TX/T and eight (8) RJ-45 10/100 T/TX external ports per server blade enclosure.
Also included (per Interconnect Switch):
  • One (1) RS-232 DB-9 front panel out-of-band management port
  • Redundant crosslink ports connecting the two interconnect switches
  • Redundant power inputs and on-board redundant fans
  • Hot-plug and hot- remove with configuration retention and no need to cable/re-cable
  • Power ON, management, and per port status and speed LED indicators
  • Reset/power momentary push-button switch
  • HP ProLiant BL Interconnect Switch Management Utilities and User Documentation CD
  • Fully pre-configured for rapid deployment and immediate operation
ProLiant BL Interconnect Switch Management System and Utilities:
Full featured web-based and scriptable command line (CLI) interfaces, password protected multi-level user accounts, Telnet, SNMP, BootP client, port mirroring, port-based VLANs and VLAN tagging, EtherChannel compatible multi-port trunking, network time protocol, spanning tree protocol, broadcast/multicast storm control, flow control, human readable/writeable configuration file, TFTP client, IP address security restrictions, auto-MDI/MDIX, auto-negotiation and auto-sensing of speed and duplex mode, and more.
ProLiant BL p-Class Storage Connectivity Kit Option
(supports two CGESM or GbE2 switches per kit)
The Storage Connectivity Kit is used if HP ProLiant BL20p G3 Fibre Channel signal pass-through is desired when using the CGESM or GbE2 Interconnect Switch. Therefore, both LAN cable consolidation and SAN connectivity is possible using a single interconnect option. Order one Storage Connectivity Kit per server blade enclosure for HP ProLiant BL20p G3 Fibre Channel pass through.
The Storage Connectivity Kit includes two OctalFC Interconnect Modules that provide sixteen open transceiver slots for the pluggable small form factor transceivers that come with each HP ProLiant BL20p G3 Dual port Fibre Channel Adapter. The Storage Connectivity Kit supports up to eight HP ProLiant BL20p G3 server blades (for a total of sixteen Fibre Channel signals).
ProLiant BL p-Class
RJ-45 Patch Panel
(Two patch panels per kit) (Every BL p-Class server blade enclosure requires two Interconnect switches OR two RJ-45 patch panels)		 6U (10.5-inch), Plugs into BL p-Class 6U server blade enclosures
Used to pass NIC signals from all server blades in server blade enclosure out as RJ-45 connections
Supports Gigabit Ethernet network adapters
16 RJ-45 connectors on the back of each BL p-Class 6U RJ-45 Patch Panel (32 RJ-45 connections per server blade enclosure)
ProLiant BL p-Class RJ-45 Patch Panel 2 (with Fibre Channel pass through)
(Two patch panels per kit)
(Every BL p-Class server blade enclosure requires two Interconnect switches OR two RJ-45 patch panels)
NOTE: The Patch Panel 2 or a Switch Interconnect Kit is required for SAN connectivity on the HP ProLiant BL20p G2 server blade
6U (10.5-inch), Plugs into BL p-Class 6U server blade enclosures
Used to pass NIC signals from all server blades in server blade enclosure out as RJ-45 connections also used to pass Fibre Channel signals for SAN connectivity
Supports Gigabit Ethernet network adapters
16 RJ-45 connectors on the back of each RJ-45 patch panel 2 (32 RJ-45 connections per server blade enclosure)
Fibre Channel,
pass through		 Fibre Channel signals travel from a HP ProLiant BL20p G2 with a Dual-Port Fibre Channel Mezzanine Card through p-Class server blade enclosure backplane. The Fibre Channel signals are terminated through the RJ-45 Patch Panel 2 in the interconnect bays. To provide redundancy each server blade has two Fibre Channel signals and one Fibre Channel signal terminates through the right RJ-45 Patch Panel 2, one Fibre Channel signal travels terminates through the left RJ-45 Patch Panel 2.
8 Fibre Channel small form factor pluggable (SPF) transceiver slots on the front of each RJ-45 patch panel 2 (16 Fibre Channel connections per server blade enclosure); for insertion of SPF transceivers included with the HP ProLiant BL20p G2 Dual-port Fibre Channel Mezzanine Card
Required Network
Cabling		10Base-T

Categories 3, 4 or 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
100Base-TXCategory 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
1000Base-TCategory 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
1000Base-SX 50/125 µm Multimode Fiber, 400 MHz/Km (500 meters)
50/125 µm Multimode Fiber, 500 MHz/Km (550 meters)
62.5/125 µm Multimode Fiber, 160 MHz/Km (220 meters)
62.5/125 µm Multimode Fiber, 200 MHz/Km (275 meters)

NOTE: For cabling information, refer to the Web site at:
http://www.compaq.com/products/servers.

contents
 Overview      Standard Features (Server Blade)      Standard Features (Server Blade Enclosure and Interconnects)      Standard Features (Power System and Rack Information)      Standard Features      Models      Options      Memory      Technical Specifications line.gif (50 bytes)

Standard Features (Power System and Rack Information)

HP BladeSystem
p-Class Power System and Rack Information

NOTE: To determine power configuration please refer to the ProLiant BL p-Class Overview and Planning Whitepaper and sizing tool at http://h18000.www1.hp.com/products/servers/proliant-bl/p-class/20p/index.html.
HP BladeSystem
p-Class Power Enclosure
 3U (5.25-inch), 19-inch wide, 29-inch deep (0.48-meter wide, 0.74-meter deep), Dual input single phase and three phase models available.

HP BladeSystem p-Class 3U power enclosure provides external, shared hot-plug power. Each three-phase power enclosure houses up to six hot-plug power supplies each single-phase power enclosures hold up to four hot-plug power supplies to power the BL p-Class server blades and interconnects
Please use the sizing utility to determine the power needed for each configuration
http://h30099.www3.hp.com/configurator/powercalcs.asp.
Power enclosures and power supplies are not needed if using facility DC (-48V DC ± 10%). If using facility DC, only Facility DC Power Connection kit part number (240563-B21) is needed.
HP BladeSystem
p-Class Power
Distribution
 In the HP BladeSystem p-Class infrastructure, redundant -48 VDC power (from the power enclosures or facility DC power) is distributed from the power enclosures to the server blade enclosures through the bus bar system. Hinges attach the HP BladeSystem bus bars to the rails in a rack. The bus bars swing open from the center to enable easy rear access to the server blades and network cables. Power is distributed redundantly through independent A- and B-sided bus bars.

Three different power distribution solutions are available depending on the maximum number of server blade enclosures planned for the rack:
  • HP BladeSystem p-Class scalable bus bar
  • HP BladeSystem p-Class mini bus bar
  • HP BladeSystem p-Class power bus box
NOTE: To support a full 42U rack of HP ProLiant BL20p server blades (6 server blade enclosures), two mini bus bars are needed.
 
Power Enclosures Supported
Server Blade Enclosures Supported
Max. Rack Space Occupied
Scalable Bus Bar
1 or 2
up to 5
36U
Mini Bus Bar
1
up to 3
21U
Power Bus Box
1
1
9U
Required Power Source Two 30amp redundant power feeds per power enclosure
Connectors
NEMA receptacles (NA/Japan)
NA 1-phase L6-30, 250v, 30A 3-wire
NA 3-phase L15-30, 250V, 30A, 4-wire
IEC 309 Pin & Sleeve connectors (International)
1-phase 250V, 32A, 3- pin (2 pole + ground) (International)
3-phase 380-415V, 32A, 5--pin (4 pole + ground) (International)
Optimized for power cabling from bottom and network cabling from top
 For cabling information, refer to the Web site at http://www.compaq.com/products/servers/.
contents
 Overview      Standard Features (Server Blade)      Standard Features (Server Blade Enclosure and Interconnects)      Standard Features (Power System and Rack Information)      Standard Features      Models      Options      Memory      Technical Specifications line.gif (50 bytes)

Standard Features

ProLiant Essentials Foundation Pack Software for the ProLiant BL Server
ProLiant Essentials Rapid Deployment Pack

Rapid Deployment Pack (RDP) is an automated deployment and provisioning solution for all ProLiant servers. RDP includes the Altiris Deployment Solution and ProLiant Integration Module featuring ProLiant server pre-configured events for OS installation, and optimized software drivers, firmware and management agents. Every RDP CD includes 10-node trial licenses for evaluation purposes. RDP requires a license for each server deployed and is available for purchase with blade servers. For more information, visit http://www.hp.com/servers/rdp.
HP Systems Insight Manager HP Systems Insight Manager (HP SIM) help maximize system uptime and performance and reduce system maintenance costs by providing proactive notification of problems before those problems result in unplanned downtime or reduced productivity. HP SIM is easy to set up to work with the Insight Management Agents, integrated Light-Out and Remote Insight Light-Out Edition, and Version Control Agents to deliver robust fault, configuration, and asset management as well as remote administration. With HP Systems Insight Manager customers will also be able to take advantage of role-based security; the ability to manage ProLiant, Integrity, and HP9000 systems; and plug-ins for storage, client, printer, and power management as well as server rapid deployment, performance management, and workload management. For more details on HP Systems Insight Manager visit http://www.hp.com/go/hpsim.
Management Agents The Management Agents form the foundation for HP's Intelligent Manageability strategy. They provide direct, browser-based access to in-depth instrumentation built into HP servers, workstations, desktops, and portables, and send alerts to HP Systems Insight Manager and other enterprise management applications in case of subsystem or environmental failures. For additional information about the Management Agents and other management products from HP, please visit the management Web site at http://www.hp.com/servers/manage.
Subscriber's Choice Subscriber's Choice Driver and Support Alerts/Notifications is a web-based email subscription service that provides software and driver change notifications for ProLiant products. Sign up at http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis.
ROMPaq, support software, and
configuration utilities
 The latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options, available in the RDP CD, SmartStart or downloadable from Software and Drivers download pages, linked from the SmartStart website at http://www.hp.com/go/support
Insight Diagnostics
Online Edition
 The most advanced configuration analysis, reporting and troubleshooting utilities used by HP and at your fingertips, available in SmartStart.
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials .
Optional ProLiant Essentials Value Packs

Optional software offerings that selectively extend the functionality of an Adaptive Infrastructure to address specific business problems and needs:

  • Workload Management Pack - provides easier management of complex environments, improving overall server utilization and enabling Windows® 2000 customers for the first time to confidently deploy multiple applications on a single multiprocessor ProLiant Server.
  • Performance Management Pack - a performance management solution that identifies and explains hardware performance bottlenecks on ProLiant servers and attached options enabling users to better utilize their valuable resources.
  • Intelligent Networking Pack - detects and analyzes network bottlenecks or broken network linkages and steers traffic to the optimum route based on network conditions.
  • Vulnerability and Patch Management Pack - identifies and remediates software security vulnerabilities due to missing patches as well operating system configurations that can be exploited by viruses, worms and other blended threats.
  • Virtual Machine Management Pack - provides central management and control of virtual machines from Microsoft and VMware. Integrated approach provides the ability to manage both physical and virtual resources from a single management console.

NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information.

SmartStart SmartStart is a tool that simplifies single server setup, providing a rapid way to deploy reliable and consistent server configurations. SmartStart 7.00 and later can now deploy the HP ProLiant BL20P G3 and HP ProLiant BL40P server blades, using the I/O port with an attached USB CD-ROM device. To obtain a copy of SmartStart for your blade server, redeem the coupon that is included with your Blade server or order your copy from the SmartStart web site. For more information, please visit the SmartStart Web site at http://www.hp.com/servers/smartstart.
SmartStart version supported (minimum): SmartStart 6.20
OS Support

Microsoft® Windows
LINUX

NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our OS Support Matrix at: http://www.hp.com/go/supportos.
NOTE: For an up-to-date listing of the latest drivers available for the ProLiant BL p-Class, please see: http://www.compaq.com/support/files/server/us/index.html.
NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux website at http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html.

Intelligent Manageability

Integrated Lights-Out Advanced (iLO)

Virtual Text and Graphical Remote Console *
Virtual CD-ROM*
Virtual Floppy *
Virtual Power Button Control
Dedicated LAN Connectivity
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) Security
IML and iLO Event Logging
Support for 12 user accounts with customizable access privileges
  Automatic Server Recovery-2 (ASR-2)
Insight Manager 7
HP Systems Insight Manager
Redundant ROM
Remote Flash ROM
ROM Based Setup Utility (RBSU)
Advanced Configuration and Power Interface Specification Ready (ACPI)
Server and Interconnect Switch Health Logs
Redundant Power Supply Utility
Pre-Failure Warranty (covers processors, as well as hard drives and memory)
Interconnect Switch Management System and Utilities (Interconnect Switch option)
Integrated Management Log (IML)
Off-Line Backup Processor capability
Dynamic sector repairing and drive parameter tracking (with Smart Array controllers)
Network adapter teaming set-up utility
  * Advanced features such as Graphical Remote Console and Virtual Floppy are included with the BL p-Class server.
Availability

Power redundancy: Redundant AC feeds into power enclosures, redundant DC feeds from power enclosure to server blade enclosures,
N + N redundant power supplies
Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection
Two hot-plug SCSI hard drive bays and integrated RAID (Smart Array 5i Plus) on every server blade (Battery-backed write cache is optional.)
Redundant ROM on each server blade
ECC Memory
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load balancing)
Interconnects Switch Availability
 
  • Hot-plug and hot- remove with configuration retention and no need to cable/re-cable
  • Two network connections per server blade bay (four NICs total) routed to two redundant interconnect switches
  • Redundant Ethernet inter-switch communication with two sets of redundant Ethernet uplink ports per each interconnect switch
  • Redundant front panel ports per each interconnect switch for diagnostics, management, and additional uplinks
  • Redundant serial ports
  • Compatibility with PVST+ (GbE2 switch) and 802.1D Spanning tree protocol support for loop-free path redundancy
  • Static IEEE 802.3ad (EtherChannel compatible) trunking with automatic port load balancing and failover
  • Redundant configuration files and operating system firmware images in memory (GbE2 switch)
  • Redundant fans per each interconnect switch
  • Redundant 1+1 power to each interconnect switch
  • Support for ProLiant network adapter teaming
  • Redundant configurable community strings and SNMP trap manager hosts
  • Redundant configurable syslog server, DNS server, and default gateways (GbE2 switch)
Security Power-on password
Administrator's password
Integrated Lights-Out has 12 customizable user accounts and SSL encryption
Integrated Lights-Out can be disabled via a Global Setting
Interconnect switch multilevel user names and passwords, management interface time out period setting, SSH*, SCP secure copy protocol*, port-based IEEE 802.1Q tagged VLANs, RADIUS user authentication and authorization*, and IP address restriction
* GbE2 Interconnect Switch only
Minimum Rack Requirements Mounts in ProLiant, and Telco racks and Third Party racks that meet the following criteria:
  • Compatible with 19-inch Standard EIA rail sets
  • EIA rail-to-rail depth is 29 - 30"
  • Cabinet depth must be at least 36-inch deep overall (Additional min. 3.5-inch clearance from rear RETMA rail to rear door, inclusive in the 36-inch overall depth)
  • Ample room for top and bottom cable egress (approximately 8 square inches for full rack configuration with patch panel)
  • Must be capable of supporting 1600 lb (for full rack configuration)
  • Perforated front and rear doors to accommodate front-to-back cooling
  • Must have 65% open perforation on server blade enclosure doors to support airflow requirements
  • Optimized for use with the HP 10000 Series racks
  NOTE: If using Compaq 7000 Series rack, Rack Extension Kit and High Air Flow Rack Door options are required.
Rack Airflow Requirements Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:
  • Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
  • Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server, or to the server documentation located in the Support section at the following URL: http://www.hp.com/servers/bl20p.
Factory Express Portfolio for Servers and Storage

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA3000 & EVA5000, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to http://www.hp.com/go/factory-express.
Service and Support

Three-year limited warranty, including hardware diagnostic support, pre-failure warranty (coverage of hard drives, memory and processors). The warranty is fully supported by HP Services and a worldwide network of resellers and service providers. In addition 90-day's getting started software telephone support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services.

  NOTE: Sever Blade Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.
NOTE: Server Blade Enclosure and Interconnects Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.
  Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business requirements, from basic to mission-critical.

A full range of HP Care Pack hardware and software services are available including:

 
  • Installation and start up
  • Education courses
  • Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7 days call window with options including 4-hour response or 6-hour Call To Repair
  • Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and VMWare-based IT solutions helping to deliver high level of application availability. Response times range from 30 mins for critical problems to 2 hours.
  • System Management, Performance Services and Mission Critical Support Solution

HP Care Pack services for ProLiant BL p-Class server blades, cover the server blade and the p-Class blade enclosure that the server blade is installed in as well as interconnects, power enclosure with power supplies and power distribution.

  NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us at: http://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
contents
 Overview      Standard Features (Server Blade)      Standard Features (Server Blade Enclosure and Interconnects)      Standard Features (Power System and Rack Information)      Standard Features      Models      Options      Memory      Technical Specifications line.gif (50 bytes)

Models
ProLiant BL20p G2 X3.2-2MB, 1GB (2P)
359031-B21
 Processor(s) (2) Intel Xeon 3.2 GHz standard (up to 2 supported)
Cache Memory 2-MB Level 3 writeback per processor
Memory 1024-MB (Standard) to 8-GB (Maximum) of 2-way interleaved capable PC2100 DDR SDRAM running at 266MHz (2x512MB)
Network Adapter Three NC7781 PCI-X Gigabit NICs (embedded) with WOL and PXE
One additional 10/100T NIC dedicated to iLO Management
Storage Controller Smart Array 5i Plus Controller (integrated on system board)
Hard Drives None ship standard
Internal Storage Up to 293.6-GB maximum (with optional hard drives)
Optical Drive None
Form Factor Plugs vertically into ProLiant BL p-Class Server Blade Enclosure
ProLiant BL20p G2 X3.2-2MB, 1GB (2P) with FC Mezz Card
359032-B21
 Processor(s) (2) Intel Xeon 3.2 GHz standard (up to 2 supported)
Cache Memory 2-MB Level 3 writeback per processor
Memory 1024-MB (Standard) to 8-GB (Maximum) of 2-way interleaved capable PC2100 DDR SDRAM running at 266MHz (2x512MB)
Network Adapter Three NC7781 PCI-X Gigabit NICs (embedded) with WOL and PXE
One additional 10/100T NIC dedicated to iLO Management
Storage Controller Smart Array 5i Plus Controller (integrated on system board)
Hard Drives None ship standard
Internal Storage Up to 293.6-GB maximum (with optional hard drives)
Optical Drive None
Form Factor Plugs vertically into ProLiant BL p-Class Server Blade Enclosure
Dual Port Fibre Channel Card Provides redundant SAN connection
ProLiant BL20p G2
X3.06-512KB, 512MB
(1P)
323145-B22
 Processor(s) (1) Intel Xeon 3.06 GHz standard (up to 2 supported)
Cache Memory 512-KB Level 2 writeback per processor
Memory 512-MB (Standard) to 8-GB (Maximum) of 2-way interleaved capable PC2100 DDR SDRAM running at 266MHz (2x256MB)
Network Adapter Three NC7781 PCI-X Gigabit NICs (embedded) with WOL and PXE
One additional 10/100 NIC dedicated to iLO Management
Storage Controller Smart Array 5i Plus Controller (integrated on system board)
Hard Drives None ship standard
Internal Storage Up to 293.6-GB maximum (with optional hard drives)
Optical Drive None
Form Factor Plugs vertically into ProLiant BL p-Class Server Blade Enclosure
ProLiant BL20p G2
X3.06-512KB, 512MB
(1P) with FC mezzanine
323146-B22


 Processor(s) (1) Intel Xeon 3.06 GHz standard (up to 2 supported)
Cache Memory 512-KB Level 2 writeback per processor
Memory 512-MB (Standard) to 8-GB (Maximum) of 2-way interleaved capable PC2100 DDR SDRAM running at 266MHz (2x256MB)
Network Adapter Three NC7781 PCI-X Gigabit NICs (embedded) with WOL and PXE
One additional 10/100 NIC dedicated to iLO Management
Storage Controller Smart Array 5i Plus Controller (integrated on system board)
Hard Drives None ship standard
Internal Storage Up to 293.6-GB maximum (with optional hard drives)
Optical Drive None
Form Factor Plugs vertically into ProLiant BL p-Class Server Blade Enclosure
Dual Port Fibre Channel Card
 Provides redundant SAN connection

ProLiant BL20p G2
X3.06-512KB, 1GB
(2P)
323147-B22

 Processor(s) (2) Intel Xeon 3.06 GHz standard (up to 2 supported)
Cache Memory 512-KB Level 2 writeback per processor
Memory 1024-MB (Standard) to 8-GB (Maximum) of 2-way interleaved capable PC2100 DDR SDRAM running at 266MHz (2x512MB)
Network Adapter Three NC7781 PCI-X Gigabit NICs (embedded) with WOL and PXE
One additional 10/100 NIC dedicated to iLO Management
Storage Controller Smart Array 5i Plus Controller (integrated on system board)
Hard Drives None ship standard
Internal Storage Up to 293.6-GB maximum (with optional hard drives)
Optical Drive None
Form Factor Plugs vertically into ProLiant BL p-Class Server Blade Enclosure
ProLiant BL20p G2
X3.06-512KB, 1GB
(2P) with FC mezzanine
323148-B22
 Processor(s) (2) Intel Xeon 3.06 GHz standard (up to 2 supported)
Cache Memory 512-KB Level 2 writeback per processor
Memory 1024-MB (Standard) to 8-GB (Maximum) of 2-way interleaved capable PC2100 DDR SDRAM running at 266MHz (2x512MB)
Network Adapter Three NC7781 PCI-X Gigabit NICs (embedded) with WOL and PXE
One additional 10/100 NIC dedicated to iLO Management
Storage Controller Smart Array 5i Plus Controller (integrated on system board)
Hard Drives None ship standard
Internal Storage Up to 293.6-GB maximum (with optional hard drives)
Optical Drive None
Form Factor Plugs vertically into ProLiant BL p-Class Server Blade Enclosure
Dual Port Fibre Channel Card
 Provides redundant SAN connection

ProLiant BL20p G2 Blades starter bundle/kit
361886-xx1
NOTE: All components are packaged/shipped together in one box.

 Blade Servers Kit contains (2) HP ProLiant BL20pG2 server blades with two 3.06GHz Intel Xeon processors and 1GB of memory
Server Blade Enclosure Kit contains 1 BL p-Class Server Blade Enclosure with 8 Rapid Deployment Pack licenses
Interconnect Kit contains BL p-Class RJ-45 Patch Panel's (comes in pairs)
Power Subsystem Kit contains 1 BL p-Class Single Phase Redundant Power Enclosure with 2 power supplies and a Mini Bus Bar

ProLiant BL20p G2 Blades starter bundle/kit - High Performance Model
361885-xx1
NOTE: All components are packaged/shipped together in one box.

 Blade Servers Kit contains (2) HP ProLiant BL20pG2 server blades with two 3.2GHz Intel Xeon processors, 1GB of memory, and Fibre Channel mezzanine adapter.
Server Blade Enclosure Kit contains 1 BL p-Class Server Blade Enclosure with 8 Rapid Deployment Pack licenses
Interconnect Kit contains BL p-Class RJ-45 Patch Panel 2 with Fibre Channel pass through (comes in pairs)
Power Subsystem Kit contains 1 BL p-Class Single Phase Redundant Power Enclosure with 2 power supplies and a Mini Bus Bar
contents
 Overview      Standard Features (Server Blade)      Standard Features (Server Blade Enclosure and Interconnects)      Standard Features (Power System and Rack Information)      Standard Features      Models      Options      Memory      Technical Specifications line.gif (50 bytes)

Options
ProLiant Essentials
Value Pack Software		 ProLiant Essentials Vulnerability and Patch Management Pack, 1- Server + 10 Desktop Bundle License
389941-B21
ProLiant Essentials Vulnerability and Patch Management Pack, Single-Server License
371645-B21
ProLiant Essentials Vulnerability and Patch Management Pack, 10 - Server License
372029-B21
ProLiant Essentials Vulnerability and Patch Management Pack, Flexible-Quantity License
371646-B21
ProLiant Essentials Vulnerability and Patch Management Pack, Tracking license for new servers
371647-B21
ProLiant Essentials Vulnerability and Patch Management Pack, Tracking license for installed servers
378372-B21
ProLiant Essentials Server Migration Pack, 25 - Server License
391674-B21
ProLiant Essentials Server Migration Pack, 50 - Server License
391675-B21
ProLiant Essentials Server Migration Pack, 100 - Server License
391676-B21
ProLiant Essentials Server Migration Pack, 10 - Server License
Note: This license allows 10 servers to be migrated from a physical server to 10 virtual machines. Or this license can be used to migrate 10 virtual machines from one virtualization layer i.e. VMware ESX or Microsoft Virtual Server 2005.
390739-B21
ProLiant Essentials Server Migration Pack, Single-Server License
375345-B21
ProLiant Essentials Server Migration Pack, Flexible-Quantity License
375346-B21
ProLiant Essentials Server Migration Pack, Tracking license
375347-B21
ProLiant Essentials Virtual Machine Management Pack, SINGLE LIC IP CCAO-WGR
372214-B21
ProLiant Essentials Virtual Machine Management Pack, FLEX LIC IP CCAO-WGR
372215-B21
ProLiant Essentials Virtual Machine Management Pack, TRACKING LIC IP CCAO-WGR
372216-B21
ProLiant Essentials Performance Management Pack, 10 - Server License
NOTE: For use with up to 10 servers. Contains 10 licenses with one unique license activation key and documentation.
374055-B21
Performance Management Pack, single server
NOTE: This license allows 1 server to be managed by Performance Management Pack.
306696-B21
Performance Management Pack, flexible license kit
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to http://www.hp.com/servers/proliantessentials
306697-B21
Rapid Deployment Pack, 10 User, V1.x

269817-B21

NOTE: This license allows 10 servers to be managed and deployed via the Deployment Server.
NOTE: Not necessary if you purchase the server blade enclosure with 8 Rapid Deployment Pack licenses 281404-B21.
NOTE: Rapid Deployment pack is now available in Linux only environments. 		 
Rapid Deployment Pack, 10 User, V1.x (Japan)
269817-291
NOTE: This license allows 10 servers to be managed and deployed via the Deployment Server.
NOTE: Not necessary if you purchase the server blade enclosure with 8 Rapid Deployment Pack licenses 281404-B21.
NOTE: Rapid Deployment pack is now available in Linux only environments. 		 
Rapid Deployment Pack, 1 User, V1.x
267196-B21
NOTE: This license allows 1 servers to be managed and deployed via the Deployment Server.
NOTE: Not necessary if you purchase the server blade enclosure with 8 Rapid Deployment Pack licenses 281404-B21.
NOTE: Rapid Deployment pack is now available in Linux only environments.
Rapid Deployment Pack, 1 User, V1.x (Japan)
267196-291
NOTE: This license allows 1 servers to be managed and deployed via the Deployment Server.
NOTE: Not necessary if you purchase the server blade enclosure with 8 Rapid Deployment Pack licenses 281404-B21.
NOTE: Rapid Deployment pack is now available in Linux only environments.
Flexible Quantity License Kit
302127-B21
License-Only - for use with a Master License Agreement
302128-B21
ProLiant Essentials Intelligent Networking Pack, Single Server License
NOTE: For use with a single server. Contains one license with a unique license activation key and documentation.
372906-B21
ProLiant Essentials Intelligent Networking Pack, Flexible License
NOTE: For use with multiple servers. This part number can be used to purchase multiple licenses with a single activation key. The quantity ordered for this part number will be the quantity of licenses included in the kit in the form of a corresponding activation key. Use the same key to activate all licenses in the actual quantity ordered. For a given order, one kit will be delivered with the activation key, and documentation.
372950-B21
ProLiant Essentials Intelligent Networking Pack, Tracking License
NOTE: For use with signed and implemented Activation Key Agreements only. Purchase of this part number entitles the customer to deploy additional licenses of the product under the terms of the existing Activation Key Agreement.
NOTE: Nothing is delivered in conjunction with the purchase of this part number. Visit http://h18004.www1.hp.com/products/servers/proliantessentials/license/akalic.html
for more information on Activation Key Agreements.
372951-B21
ProLiant Essentials Workload Management Pack (Featuring Resource Partitioning Manager version 2.0)
303284-B21
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://hp.com/servers/proliantessentials.
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to URL http://hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
Processor Intel Xeon 2.80 GHz-1M Processor Option Kit
359559-B21
Intel Xeon 3.06 GHz-512KB Processor Option Kit

323247-B21
Intel Xeon 2.80 GHz-512KB Processor Option Kit
300873-B21
  NOTE: There is no option kit offered for the Intel Xeon 3.2GHz-1MB or 3.06 GHz-1MB Processor because all models ship with two processors.  

Memory
(SDRAM DIMMs)

 4096MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (2 x 2 GB)
300682-B21
2048MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (2 x 1 GB)
300680-B21
1024MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (2 x 512 MB)
300679-B21
512MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (2 x 256 MB)
300678-B21
Hard Drives Ultra 320 SCSI – Universal Hot Plug
146.8-GB 10,000 rpm U320 Universal Hard Drive (1")
286716-B22
72.8-GB 10,000 rpm U320 Universal Hard Drive (1")
286714-B22
300-GB 10,000 rpm U320 Universal Hard Drive (1")
350964-B22
146.8-GB 15,000 rpm U320 Universal Hard Drive (1")
347708-B22
72.8-GB 15,000 rpm U320 Universal Hard Drive (1")
286778-B22
36.4-GB 15,000 rpm U320 Universal Hard Drive (1")
286776-B22
SAN Switches Brocade 4GB SAN Switch, Base
A7533A
Brocade 4GB SAN Switch, full fabric
A7534A
Brocade 4GB SAN Switch, power pack
A7535A
Storage Controllers Battery Backed Write Cache Enabler Option Kit

255514-B21
Battery Backed Write Cache Enabler Option Kit (Japan)

255514-291
NOTE: Please see the following Controller QuickSpecs for Technical Specifications such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported, SCSI Peak Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache, RAID support, and additional information:
http://h18000.www1.hp.com/products/quickspecs/11063_div/11063_div.HTML (Smart Array 5i Plus)
ProLiant BL20p G2 - Fibre Channel Mezzanine Card Dual port Fibre Channel Mezzanine Card (2-Gb) for ProLiant BL20p G2

300874-B21
NOTE: When using this card, the Patch Panel 2 or a GbE2 Interconnect Switch (with Connectivity Kit) must be used to provide the Fibre Channel pass through.
HP BladeSystem
p-Class Server
Blade Enclosures
 HP BladeSystem p-Class Server Blade Enclosure with the HP BladeSystem Management Suite
NOTE: Includes a HP BladeSystem p-Class Server Blade Enclosure, a single copy of Systems Insight Manager (SIM) and 8 licenses for each of the following products: Rapid Deployment Pack (RDP), Performance Management Pack (PMP) and the Vulnerability and Patch Management Pack (VPM).
380625-B22
HP BladeSystem p-Class Server Blade Enclosure (ProLiant Essentials Rapid Deployment Pack Trial)

243564-B21
HP BladeSystem p-Class Server Blade Enclosure (8 ProLiant Essentials Rapid Deployment Pack Licenses)
281404-B21
HP BladeSystem p-Class Server Blade Enclosure with enhanced backplane components (ProLiant Essentials Rapid Deployment Pack Trial)
243564-B22
HP BladeSystem p-Class Server Blade Enclosure with enhanced backplane components (8 ProLiant Essentials Rapid Deployment Licenses)
NOTE: HP BladeSystem p-Class Enhanced Server Blade Enclosures may be required depending on which HP ProLiant BL20pG3 server blade model is selected.
281404-B22
HP BladeSystem p-Class Server Blade Enclosure Upgrade Kit (option)
NOTE: Server Blade Enclosure Upgrade Kit (354100-B21) contains enhanced backplane components and enables a field upgrade of a blade enclosure to support BL p-class blades and provide a single, physical iLO port for the enclosure.
354100-B21
HP BladeSystem
p-Class Interconnects		 ProLiant BL p-Class RJ-45 Patch Panel 2 with Fibre pass-through (pair) (required for FC connectivity)

306465-B21

NOTE: Only one interconnect kit required per server blade enclosure.  
ProLiant BL p-Class RJ-45 Patch Panel (pair)
230766-B21
NOTE: Only one interconnect kit required per server blade enclosure.  
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Interconnect Kit Base Unit only
NOTE: Two CGESM interconnect kits required per server blade enclosure.
378926-B21
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Interconnect Kit Base Unit (populated with two RJ-45 10/100/1000 T/TX/T Small Form Factor Pluggable (SFP) Modules.
NOTE: Two CGESM interconnect kits required per server blade enclosure.
378927-B21
Cisco RJ-45 10/100/1000 T/TX/T SFP Module
378928-B21
Cisco Fiber SX SFP Module
378929-B21
ProLiant BL p-Class C-GbE2 Interconnect Kit (with pair of GbE2 Interconnect Switches and two QuadT2 Interconnect Modules)
283192-B21
NOTE: Only one interconnect kit required per server blade enclosure.  
ProLiant BL p-Class F-GbE2 Interconnect Kit (with pair of GbE2 Interconnect Switches and two QuadSX Interconnect Modules)
283193-B21
NOTE: Only one interconnect kit required per server blade enclosure.  
ProLiant BL p-Class Storage Connectivity Kit (with pair of OctalFC Interconnect Modules and two Fibre Channel signal conditioning cards)
321745 -B21
NOTE: Required for HP ProLiant BL20P G2 Fibre Channel signal pass through when using the GbE2 Interconnect Switch.
NOTE: Only one Storage Connectivity Kit required per each GbE2 Interconnect Kit.
  
ProLiant BL p-Class C-GbE Interconnect Kit (with pair of GbE Interconnect Switches and two QuadT Interconnect Modules)
249655-B21
NOTE: Only one interconnect kit required per server blade enclosure.
NOTE: The GbE Interconnect Switch supports server NIC speeds to 100 Mbps. It is recommended that a patch panel or GbE2 Interconnect Switch option be used if server NIC speeds to 1000 Mbps are required.
NOTE: To meet applicable radio frequency (RF) emission limits, the sidewall panels on the ends of any individual rack or a series of coupled racks and the front and rear doors must be installed in any racks containing more than one ProLiant BL p-Class GbE Interconnect Kit.
ProLiant BL p-Class F-GbE Interconnect Kit (with pair of GbE Interconnect Switches and two DualTSX Interconnect Modules)
279720-B21
NOTE: Only one interconnect kit required per server blade enclosure.
NOTE: The GbE Interconnect Switch supports server NIC speeds to 100 Mbps. It is recommended that a patch panel option be used if server NIC speeds to 1000 Mbps are required.
NOTE: To meet applicable radio frequency (RF) emission limits, the sidewall panels on the ends of any individual rack or a series of coupled racks and the front and rear doors must be installed in any racks containing more than one ProLiant BL p-Class GbE Interconnect Kit.
HP BladeSystem
p-Class Power
Options		 NOTE: Use p-Class sizing tool to help determine power configuration:
http://h30099.www3.hp.com/configurator/powercalcs.asp

 

Single Phase Power Enclosure with 4 power supplies (NA/JPN)
(Single Phase Power Enclosure holds a maximum of 4 power supplies; no need to order additional power supplies with this option kit)
239162-001
Single Phase Power Enclosure with 4 power supplies (Int'l)
(Single Phase Power Enclosure holds a maximum of 4 power supplies; no need to order additional power supplies with this option kit)
239162-421
3 Phase Power Enclosure with 6 power supplies (NA/JPN)
(3 Phase Power Enclosure holds a maximum of 6 power supplies; no need to order additional power supplies with this option kit)
230769-001
3 Phase Power Enclosure with 6 power supplies (Int'l)
(3 Phase Power Enclosure holds a maximum of 6 power supplies; no need to order additional power supplies with this option kit)
230769-421
Single Phase Power Enclosure (empty) (NA/JPN)
(Holds up to 4 power supplies; power supplies are not included in this kit)
231710-001
Single Phase Power Enclosure (empty) (Int'l)
(Holds up to 4 power supplies; power supplies are not included in this kit)
231710-421
3 Phase Power Enclosure (empty) (NA/JPN)
(Holds up to 6 power supplies; power supplies are not included in this kit)
231709-001
3 Phase Power Enclosure (empty) (Int'l)
(Holds up to 6 power supplies; power supplies are not included in this kit)
231709-421
Single 3U Power Supply
239161-B21
1U Power Enclosure with six power supplies
378284-B21
1U Power Enclosure with two power supplies
380314-B21
Single 1U power supply
380312-B21
Facility DC Power Connection
240563-B21
Power Distribution (only required with 3U power enclosure) ProLiant p-Class Scalable Bus Bar
240560-B21
ProLiant p-Class Mini Bus Bar
240559-B21
ProLiant p-Class Bus Power Box
240562-B21
HP Modular Distribution Unit 40 Amp (NA/JPN)*
252663-D75
HP Modular Distribution Unit 40 Amp (Int'l)*
252663-B34
HP Modular Distribution Unit 32 Amp (Int'l)*
252662-B33
HP Modular Distribution Unit 24 Amp (NA/JPN)*
*NOTE: The Modular Distribution Unit Kits excludes the extension bars as they are not required with the HP BladeSystem p-class 1U power enclosure.
252663-D74
HP BladeSystem Power Extension Kit
NOTE: This kit is specifically for HP BladeSystem p-Class customers who want to upgrade their standard server blade enclosures to enhanced server blade enclosures and would like to install an additional, redundant 3U power enclosure above the server blade enclosures rather than below them. The option kit consists of two extension cable assemblies - one for each side (A and B).
381686-B21
Other Options

ProLiant p-Class Diagnostic Station
NOTE: The Diagnostic Station allows access to the HP ProLiant BL20p server blade and the BL p-Class interconnect switch outside of the server enclosure. The option provides power and a data interface so that "offline" upgrade and diagnostic functions may be performed.

230743-B21

ProLiant BL p-Class Server Enclosure Shipping Bracket Option Kit
NOTE: Used to secure one server blade enclosure in a rack when moving.

293121-B21
ProLiant BL p-Class Power Enclosure Shipping Bracket Option Kit
NOTE: Used to secure one power enclosure in a rack when moving.
365044-B21

Tape Libraries

 HP StorageWorks MSL6000 Tape Library
Ultrium 960 technology  
MSL6030, 1 drive, 30 slots, Ultrium 960 AD606A
MSL6030, 2 drive, 30 slots, Ultrium 960 AD607A
MSL6030, 1 drive, 30 slots, Ultrium 960, with embedded FC router AD608A
MSL6030, 2 drive, 30 slots, Ultrium 960, with embedded FC router AD609A
MSL6060, 2 drive, 60 slots, Ultrium 960 AD610A
MSL6060, 2 drive, 60 slots, Ultrium 960, with embedded FC router AD611A
SDLT 600 technology  
MSL6026, 1 drive, 26 slots, SDLT 600 AD582A
MSL6026, 2 drive, 26 slots, SDLT 600 AD583A
MSL6026, 1 drive, 26 slots, SDLT 600, with embedded FC router AD584A
MSL6026, 2 drive, 26 slots, SDLT 600, with embedded FC router AD585A
MSL6052, 2 drive, 52 slots, SDLT 600 AD587A
MSL6052, 2 drive, 52 slots, SDLT 600, with embedded FC router AD588A
Ultrium 460 technology  
MSL6030, 1 drive, 30 slots, Ultrium 460 AD598A
MSL6030, 2 drive, 30 slots, Ultrium 460 AD599A
MSL6030, 1 drive, 30 slots, Ultrium 460, with embedded FC router AD600A
MSL6030, 2 drive, 30 slots, Ultrium 460, with embedded FC router AD601A
MSL6060, 2 drive, 60 slot Ultrium 460, with embedded FC router AD604A
NOTE: Please reference the MSL6000 Tape Library QuickSpecs at www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at www.hp.com/go/ebs.  
HP StorageWorks MSL5026S2 Tape Library  
MSL5026S2, 1 drive, 26 slots, SDLT 320, RM  
MSL5026S2, 2 drive, 26 slots, SDLT 320, RM  
MSL5026S2, 1 drive, 26 slots, SDLT 320, RM with embedded FC router  
MSL5026S2, 2 drive, 26 slots, SDLT 320, RM with embedded FC router  
NOTE: Please reference the MSL5026S2 Tape Library QuickSpecs at http://www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at http://www.hp.com/go/ebs.  
HP StorageWorks MSL5052S2 Tape Library  
MSL5052S2, 2 drive, 52 slots, SDLT 320, RM 293474-B21
MSL5052S2, 2 drive, 52 slots, SDLT 320, RM with embedded FC router 293474-B24
MSL5052S2, 2 drive, 52 slots, SDLT 320, TT 293476-B21
NOTE: Please reference the MSL5052S2 Tape Library QuickSpecs at http://www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at http:/www.hp.com/go/ebs  
HP StorageWorks MSL5060 Tape Library  
MSL5060, 2 drive, 60 slots, Ultrium 230, RM 301899-B22
MSL5060, 2 drive, 60 slots, Ultrium 230, RM with embedded FC router 301899-B23
MSL5060, 2 drive, 60 slots, Ultrium 230, TT 301900-B21
NOTE: Please reference the MSL5060 Tape Library QuickSpecs at http://www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at http://www.hp.com/go/ebs  
HP StorageWorks ESL E-Series Tape Libraries
 
ESL Extended 712e Tape Library, 0 drive, 712 LTO slots
AA934B
ESL Extended 630e Tape Library, 0 drive, 630 SDLT slots
 AA935B
ESL Extended 322e Tape Library, 0 drive, 322 LTO slots
 AA939B
ESL Extended 286e Tape Library, 0 drive, 286 SDLT slots
 AA940B
ESL E-Series Ultrium 960 drive kit AD595A
ESL E Ultrium 460 drive kit
AA937A
ESL E SDLT 320 drive kit
 AA936A
ESL E e2400-FC 2G Interface Controller AA928A
NOTE: Please reference the ESL E-Series Tape Libraries QuickSpecs at http://www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at http://www.hp.com/go/ebs.  

Magneto-Optical Jukeboxes

 HP StorageWorks 9.1 GB Mid-range Optical Jukeboxes
  
300mx, 2 drive, 32 slot jukebox C1150M
  600mx, 4 drive, 64 slot jukebox C1160M
  700mx, 2 drive, 76 slot jukebox C1170M
  NOTE: Please reference the Magneto-Optical Jukebox data sheets at http://www.hp.com/go/optical for additional information needed to create a complete solution  
  HP StorageWorks 9.1 GB High-end Optical Jukeboxes  
  1200mx, 4 drive, up to 128 slots C1104M
  1200mx, 6 drive, up to 128 slots C1105M
  2200mx, 4 drive, up to 238 slots C1111M
  2200mx, 6 drive, up to 238 slots C1107M
  2200mx, 10 drive, up to 238 slots C1110M
HP StorageWorks Modular Smart Array 1000 HP StorageWorks Modular Smart Array 1000 201723-B22
Modular Smart Array 1000 Controller 218231-B22
Modular Smart Array Fibre Channel I/O Module 218960-B21
Modular Smart Array hub 2/3 286763-B21
NOTE: Please see the StorageWorks Modular Smart Array 1000 QuickSpecs for additional options and configuration information at:
http://h18000.www1.hp.com/products/quickspecs/11033_na/11033_na.HTML (North America)
http://h18000.www1.hp.com/products/quickspecs/11033_div/11033_div.HTML (Worldwide)
  
Cluster Options ProLiant Cluster HA/F200 for the Entry Level SAN

364026-B21

ProLiant Cluster HA/F200 for the Entry Level SAN (JPN)

364026-291

NOTE: For additional information regarding the ProLiant Cluster for HA/F100, HA/F200 for Modular Smart Array 1000 please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11035_na/11035_na.html
(North America)
http://h18000.www1.hp.com/products/quickspecs/11035_div/11035_div.html (Worldwide)		  
ProLiant Cluster Starter Kit
364023-B21
ProLiant Cluster Kit with OpenView Storage Mirroring
364025-B21
NOTE: For additional information regarding the HP ProLiant Cluster for ProLiant Cluster HA/F500 for Enterprise Virtual Array please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11055_na/11055_na.html
(North America)
http://h18000.www1.hp.com/products/quickspecs/11055_div/11055_div.html (Worldwide)
  
ProLiant Cluster F500 for the Enterprise SAN
364024-B21
NOTE: For additional information regarding the HP ProLiant Cluster for HA/F500 please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/10232_na/10232_na.html
(North America)
http://h18000.www1.hp.com/products/quickspecs/10232_div/10232_div.html (Worldwide)		  
HP Serviceguard for Linux ProLiant Cluster A.11.15 for SUSE SLES 8 / UnitedLinux 1.0 and Red Hat EL 3 (2 node license cluster kit). 305199-B24
NOTE: Kit includes 2 licenses, documentation and an Ethernet crossover cable.  
HP Serviceguard for Linux ProLiant Cluster A.11.16 for SUSE SLES 9 and Red Hat EL 3 (2 node license cluster kit) 305199-B25
HP Serviceguard for Linux License A.11.15 for SUSE SLES 8 / UnitedLinux 1.0 and Red Hat EL 3 (single license version) 307754-B24
NOTE: Kit includes single license version and documentation.  
HP Serviceguard for Linux A.11.16 for SUSE SLES9 and Red Hat EL 3 (single license version) 307754-B25
NOTE: For additional information regarding the HP Serviceguard for Linux License, please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11518_na/11518_na.html
(North America)
http://h18000.www1.hp.com/products/quickspecs/11518_div/11518_div.html (Worldwide)		  
USB Options USB 1.44-MB External Diskette Drive (Carbonite)
DC141B
USB Optical Scroll Mouse (Carbonite) DD441B
256MB HP Drive Key II (USB 2.0) PH657A
HP Rack 5000 Series HP 5642 Rack - Unassembled
358254-B21
Rack Options for
Rack 5000 Series
Stabilizer Kit for 5642 Rack (Graphite Carbon)
NOTE: The stabilizing kit is used to prevent rack from tipping over.
374493-B21
  Baying Kit for 5642 Rack (Graphite Carbon)
NOTE: The baying kit is used to join two or more HP 5642 racks.
374499-B21

Rack 10000 Series
(Graphite Metallic)

 Rack, HP Infrastructure 42U (HV)
379005-001
Rack, HP Infrastructure 42U (LV)
379006-001
HP Rack 10842 (42U) - Pallet
257415-B21
HP Rack 10842 (42U) - Shock Pallet
257415-B22
HP S10614 (14U) Rack Cabinet - Shock Pallet
292302-B22

HP Rack 10647 (47U) Cabinet - Pallet

245160-B21

HP Rack 10647 (47U) Cabinet - Crated

245160-B23

HP Rack 10642 (42U) Cabinet - Pallet

245161-B21

HP Rack 10642 (42U) Cabinet - Shock Pallet

245161-B22

HP Rack 10642 (42U) Cabinet - Crated

245161-B23

HP Rack 10636 (36U) Cabinet - Pallet

245162-B21

HP Rack 10636 (36U) Cabinet - Shock Pallet

245162-B22

HP Rack 10636 (36U) Cabinet - Crate

245162-B23

HP Rack 10622 (22U) Cabinet - Pallet

245163-B21

HP Rack 10622 (22U) Cabinet - Shock Pallet

245163-B22

HP Rack 10622 (22U) Cabinet - Crated

245163-B23
NOTE: -B21 (pallet) used to ship empty racks shipped on a truck
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels)
-B23 (crated) used for air shipments of empty racks
Not all HP equipment is qualified to be shipped in the Rack 10000 series.		  
NOTE: Please see the Rack 10000 QuickSpecs for Technical Specifications such as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/10995_div/10995_div.HTML
(Worldwide)
http://h18000.www1.hp.com/products/quickspecs/10995_na/10995_na.HTML
(North America)		  
NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://h18000.www1.hp.com/products/servers/proliantstorage/rack-options/index.html  

Rack Options for HP
Rack 10000 Series

 HP Rack Plinth Kit (Carbon)
251960-B21
HP Rack Light Kit (Neon)
361589-B21

42U Side Panel – Graphite Metallic

246099-B21

36U Side Panel – Graphite Metallic

246102-B21

47U Side Panel – Graphite Metallic

255486-B21
NOTE: For additional information regarding Rack Options, please see the following URL: http://h18000.www1.hp.com/products/servers/proliantstorage/rack-options/index.html.  
TFT7210R Rack Mounted 17" Monitor 348373-B21
348373-B21

TFT5600 Rack Keyboard Monitor

221546-xx1
Country Code Key (for TFT5600 RKM Rack Keyboard Monitor (PN 221546-xx1))  
NOTE: For additional information regarding Rack Cabinets, please see the following URL:
http://h18000.www1.hp.com/products/servers/proliantstorage/rack-ptions/index.html.		  
NOTE: For a complete list of Monitors please view the following URL:
http://h18004.www1.hp.com/products/monitors/
XX = 001 US XX = 091 Norway
XX = 031 UK XX = 101 Sweden/Finland
XX = 041 Germany XX = 111 Switzerland
XX = 051 France XX = 131 Portugal
XX = 061 Italy XX = 181 Belgium
XX = 071 Spain XX = 291 Japan
XX = 081 Denmark XX = B31 International
1U Rack Keyboard & Drawer (Carbon)
257054-xx1
Country Code Key (for 1U Rack Keyboard & Drawer (PN 257054-xx1))
XX = 001 US XX = 091 Norway
XX = 031 UK XX = 101 Sweden/Finland
XX = 041 Germany XX = 111 Switzerland
XX = 051 France XX = 131 Portugal
XX = 061 Italy XX = 181 Belgium
XX = 071 Spain XX = 291 Japan
XX = 081 Denmark XX = B31 International
NOTE: For additional information regarding Rack Options, please see the following URL: http://h18000.www1.hp.com/products/servers/proliantstorage/rack-options/index.html.
HP KVM Switch Options IP Console Switch Box (KVM/IP), 1 x 1 x 16
262585-B21
IP Console Switch Box (KVM/IP), 3 x 1 x 16
262586-B21
CAT5 KVM USB Interface Adapter
336047-B21
CAT5 KVM Serial Interface Adapter
373035-B21
CAT5e Cable 3', 4 pack
263474-B21
CAT5e Cable 6', 8 pack
263474-B22
CAT5e Cable 12', 8 pack
263474-B23
CAT5e Cable 20', 4 pack
263474-B24
CAT5e Cable 40', 1 pack
263474-B25
NOTE: For additional information regarding HP KVM Switches and options, please see the following URL:
http://h18004.www1.hp.com/products/servers/proliantstorage/rack-options/list.html#console
  
Rack Options for Telco Racks ProLiant BL p-Class Bus Bar Telco Rack Kit
245249-B21
ProLiant BL p-Class Enclosure Telco Rack Kit
266076-B21

Service and Support Offerings (HP Care Pack Services)
NOTE: The HP Care Pack services for ProLiant BL p-Class server blades, cover the server blade and the p-Class blade enclosure that the server blade is installed in as well as interconnects, power enclosure with power supplies and power distribution.  

Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage,
3 Years

UA203A
Next Business Day On-site Service, 5-Day x 9-Hour Coverage,
3 Years, Electronic
UA203E
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years
UA204A
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
UA204E
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years
UA205A
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UA205E
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years
UA206A
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UA206E

Installation & Start-up Services
ProLiant BL p-Class Blade Server Hardware Installation

UA219A
ProLiant BL p-Class Blade Server Hardware Installation, Electronic
UA219E
ProLiant BL p-Class Enclosure and Server Blade Hardware Installation
U4971A
ProLiant BL p-Class Enclosure and Server Blade Hardware Installation, Electronic
U4971E
Provides for the Installation and Start-up of Compaq's Rapid Deployment Pack on a Customer supplied server designated as a Deployment Server. Includes the deployment of a single server. This new server will be deployed using either one of the pre-configured scripts or an image. In addition, the service will provide for the capture and storage of the configuration of the newly deployed server and orientation on product usage. To be delivered during standard office ours, standard office days.
U5683A
Provides for the Installation and Start-up of Compaq's Rapid Deployment Pack on a Customer supplied server designated as a Deployment Server. Includes the deployment of a single server. This new server will be deployed using either one of the pre-configured scripts or an image. In addition, the service will provide for the capture and storage of the configuration of the newly deployed server and orientation on product usage. To be delivered during standard office ours, standard office days. Electronic.
U5683E
Provides for the Installation and Start-up of Rapid Deployment Pack Implementation of Rapid Deployment Pack (Basic)
UA042A
Provides for the Installation and Start-up of Rapid Deployment Pack Implementation of Rapid Deployment Pack (Basic) (Electronic)
UA042E
Provides for the Installation and Start-up of System Insight Manager
UA041A
Provides for the Installation and Start-up of System Insight Manager (Electronic)
UA041E
Provides for the Installation and Start-up of System Insight Manager Agents
UA040A
Provides for the Installation and Start-up of System Insight Manager (Electronic)
UA040E
NOTE: For more information, customer/resellers can contact http://www.hp.com/services/carepack.  
Software Operating Environment Care Packs  
Microsoft Software Operating Environment Software Telephone 9x5 - 3 incident
U8169A
Microsoft Software Operating Environment Software Telephone 9x5 - 3 incident (Electronic)
U8169E
Red Hat Software Operating Environment Software Telephone 9x5 - 10 incident
U3402A
Red Hat Software Operating Environment Software Telephone 9x5 - 10 incident (Electronic)
U3402E
SUSE Software Operating Environment Software Telephone 9x5 - 3 incident
U9615A
SUSE Software Operating Environment Software Telephone 9x5 - 3 incident (Electronic)
U9615E
ProLiant Essentials Operating Environment, - 5 Day, 8x5,1 year, 3 incident
U8222A
ProLiant Essentials Operating Environment, - 5 Day, 8x5,1 year, 3 incident (Electronic)
U8222E
contents
 Overview      Standard Features (Server Blade)      Standard Features (Server Blade Enclosure and Interconnects)      Standard Features (Power System and Rack Information)      Standard Features      Models      Options      Memory      Technical Specifications line.gif (50 bytes)

Memory

HP ProLiant BL20p G2 Server Blade (2P Model)

Standard Memory
1024-MB PC2100 MHz Registered DDR SDRAM DIMM installed (2 x 512-MB SDRAM DIMM)
Standard Memory Plus Optional Memory
Up to 5120-MB of DDR SDRAM DIMM memory is available with the installation of optional DDR SDRAM DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 8192-MB of DDR SDRAM DIMM memory is available with the removal of standard memory and the installation of optional SDRAM DDR DIMM memory expansion kits.

Memory

Slot
 

1

2

3

4

Standard

1024 MB

512 MB

512 MB

Empty

Empty
Optional

5120 MB

512 MB

512 MB

2048 MB

2048 MB
Maximum 8192 MB

2048 MB

2048 MB

2048 MB

2048 MB
 

Following are memory options available from HP:

  
  • 4096MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (2 x 2 GB)
 300682-B21
  • 2048MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (2 x 1 GB)

300680-B21
  • 1024MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (2 x 512 MB)

300679-B21
  • 512MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (2 x 256 MB)

300678-B21
 
HP ProLiant BL20p G2 Server Blade (1P Model)
Standard Memory
512-MB PC2100 MHz Registered DDR SDRAM DIMM installed (2 x 256-MB SDRAM DIMM)
Standard Memory Plus Optional Memory
Up to 4608-MB of DDR SDRAM DIMM memory is available with the installation of optional DDR SDRAM DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 8192-MB of DDR SDRAM DIMM memory is available with the removal of standard memory and the installation of optional DDR SDRAM DIMM memory expansion kits.

Memory

Slot
 

1

2

3

4

Standard

512 MB

256 MB

256 MB

Empty

Empty
Optional

4608 MB

256 MB

256 MB

2048 MB

2048 MB
Maximum 8192 MB

2048 MB

2048 MB

2048 MB

2048 MB
 

Following are memory options available from HP:

  
  • 4096MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (2 x 2 GB)
 300682-B21
  • 2048MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (2 x 1 GB)

300680-B21
  • 1024MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (2 x 512 MB)

300679-B21
  • 512MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (2 x 256 MB)

300678-B21
contents
 Overview      Standard Features (Server Blade)      Standard Features (Server Blade Enclosure and Interconnects)      Standard Features (Power System and Rack Information)      Standard Features      Models      Options      Memory      Technical Specifications line.gif (50 bytes)

Technical Specifications
HP BladeSystem
p-Class Server Blade Enclosure with enhanced backplane components

Dimensions

Height

10.5 in (26.67 cm)
Width

17.60 in (44.70 cm)
Depth

28.86 in (73.30 cm)

Input Specifications

Rated input voltage

-43 VDC to -53 VDC

 Nominal -48 VDC
  Rated input current 125 A at -48 VDC
 

Rated input Power

6000 W

Individual Server Blade
Bay Ratings

 Rated input voltage -43 VDC to -53 VDC Nominal -48 VDC
Rated input current 14.6 A at -48 VDC
Rated input Power 700 W

Temperature Range

 Operating 50° to 95° F (10° to 35° C)
Non-Operating -22° to 140° F (-30° to 60° C)

Relative Humidity
(non-condensing)

 Operating 20% to 80%
Non-Operating 5% to 95%

Wet Bulb Temperature

 Operating 82.4° F (28° C)
Non-Operating 101.7° F (38.7° C)
NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.
Operating and
Performance
Specifications for RJ-45 Patch Panel 2 with Fiber Channel pass through

Dimensions

Height

10.405 in (26.43 cm)

Width

1.535 in (3.899 cm)

Depth

27.697 in (70.35 cm)

CapabilityIEEE 802.2, 802.3, 802.3u

Network Transfer Rate

10 Base-T (half-duplex)

10 Mbps

10 Base-T (full-duplex)

20 Mbps

100 Base-TX (half-duplex)100 Mbps
100 Base-TX (full-duplex)200 Mbps

1000 Base-TX (full-duplex)

1000 Mbps

Fiber Channel SANVelio VC1070 re-timerAuto-rate negotiate between 2G and 1G

Connector

NetworkRJ-45 in the back.
Fiber Channel SANPluggable SFP optical slot in the front.

Cable Support

10 Base-TXCategories 3, 4, or 5 UTP (2 or 4 pair);
up to 328 ft (100 m)
100 Base-TXCategory 5 UTP (2 pair); up to 328 ft/100 m
1000 Base-TXCategory 5E (4 pair); up to 328 ft (100 m)
Fiber ChannelSFP optical cable

EMI

FCC Class A
ICES-003 Class A
AS/NZS 3548 Class A
VCCI Class A
 NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.
Operating and
Performance
Specifications for RJ-45 Patch Panel

Dimensions

Height

10.405 in (26.43 cm)

Width

1.535 in (3.899 cm)

Depth

27.697 in (70.35 cm)

CapabilityIEEE 802.2, 802.3, 802.3u

Network Transfer Rate

10 Base-T (half-duplex)

10 Mbps

10 Base-T (full-duplex)

20 Mbps

100 Base-TX (half-duplex)100 Mbps
100 Base-TX (full-duplex)200 Mbps

1000 Base-TX (full-duplex)

1000 Mbps

Connector

 Network RJ-45 in the back

Cable Support

10 Base-TXCategories 3, 4, or 5 UTP (2 or 4 pair);
up to 328 ft (100 m)
100 Base-TXCategory 5 UTP (2 pair); up to 328 ft (100 m)
1000 Base-TXCategory 5E (4 pair); up to 328 ft (100 m)

Power Requirements

200 mA at + 5V DC; 500 mA at -48V
Temperature RangeOperating50° to 95° F (10° to 35° C)
Non-operating-22° to 140° F (-30° to 60° C)
Relative Humidity
(non-condensing)		Operating20% to 80%
Non-operating5% to 95%
Wet Bulb TemperatureOperating82.4° F (28° C)
Non-operating101.7° F (38.7° C)
 NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.
Operating and
Performance
Specifications for GbE
Interconnect Switch

Dimensions

Height

10.405 in (26.43 cm)
Width

1.535 in (3.899 cm)
Depth

27.697 in (70.35 cm)
Weight 11.5 lb/5.2 kg per interconnect switch

Performance

 9.6 Gbps external port bandwidth per server blade enclosure (full duplex)
Forwarding rate 0.15 million pps per 10/100 port, 1.5 million pps per gigabit port, (64-byte packets)
Non-blocking, full-wire speed for all connections
Auto-MDI/MDIX, auto-negotiation and auto-sensing with full-duplex support

Forwarding Mode

 Store and forward
MAC Addresses 8,191 per interconnect switch; MAC address based filtering and MAC address packet priority configuring
Forwarding Table
Age Time		 Maximum age: 1 to 1,000,000 seconds; default: 300 seconds
Memory 32MB Main, 6MB flash and 16MB packet buffer per interconnect switch
Compliance IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3z (F-GbE only), 802.1D, 802.1p, 802.3ac, 802.3ad (Static), and 802.1Q
SNMP v1 (RFC 1157) and RMON v1 (RFC 1757) groups 1, 2, 3, and 9
MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface Group MIB (RFC 2863), Ethernet MIB (RFC 1643), 802.1Q Extended Bridge MIB (RFC 2674), Entity MIB (RFC 2037), SNMP Trap Convention (RFC 1215), Bridge Trap (RFC 1493), Remote Monitoring Traps (RFC 1757), and HP Enterprise Switch MIBs and Environmental Traps
IGMP v1 (RFC 1112), IGMP v2 (RFC 2236), SNTP (RFC 1361), Telnet (RFC 854), TFTP client (RFC 783), BootP client, (RFC 2132), DHCP client, (RFC 2131) and ZModem,
Network Transfer
Rate 		10 Base-T (half-duplex) 10 Mbps
10 Base-T (full-duplex) 20 Mbps
100 Base-TX (half-duplex) 100 Mbps
100 Base-TX (full-duplex) 200 Mbps
1000 Base-TX (half and full-duplex) 2000 Mbps
1000 Base-SX (full-duplex) 2000 Mbps
Connector 12 RJ-45, 2 DB-9 (C-GbE Interconnect Kit)
4 LC fiber, 8 RJ-45, 2 DB-9 (F-GbE Interconnect Kit)
EMI FCC Class A
ICES-003 Class A
AS/NZS 3548 Class A
VCCI Class A
Safety UL/CUL Listed Accessory
CE
Power
Requirements		 -48VDC: 1050 mA, 50 W maximum (per interconnect switch)
Temperature
R range		 Operating 50° to 95° F (10° to 35° C)
Non-operating -22° to 140° F (-30° to 60° C)
Relative Humidity
(non-condensing)		 Operating 20% to 80%
Non-operating 5% to 95%
Wet Bulb
Temperature		 Operating 82.4° F (28° C)
Non-operating 101.7° F (38.7° C)
  NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.
Operating and Performance Specifications for GbE2 Interconnect Switch

Dimensions

Height

10.405 in (26.43 cm)
Width

1.535 in (3.899 cm)
Depth

27.697 in (70.35 cm)
Weight 12.0 lb/5.4 kg per interconnect switch

Performance

 24 Gbps External port bandwidth per server blade enclosure (full duplex)
Forwarding rate 1.5 million pps per gigabit port (64-byte packets)
Auto-MDI/MDIX, auto-negotiation and auto-sensing with full-duplex support

Forwarding Mode

 Store and forward
MAC Addresses 2,048 per interconnect switch
Forwarding Table
Age Time		 Maximum age: 1 to 65535 seconds; default: 300 seconds
Memory 128MB Main, 32MB flash and 2MB packet buffer per interconnect switch
Compliance IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3z (F-GbE2 only), 802.1D, 802.3ac, 802.3ad (Static), and 802.1Q
SNMP v1 (RFC 1157), MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface Group MIB (RFC 2863), Ethernet MIB (RFC 1643), 802.1Q Extended Bridge MIB , Entity MIB (RFC 2037), RADIUS Authentication MIB, 802.3-2002 MIB, SNMP Trap Convention (RFC 1215), Bridge Trap (RFC 1493), Remote Monitoring Traps (RFC 1757) and HP Enterprise Switch MIBs and Environmental Traps
RADIUS (RFC 2138), Telnet (RFC 854), TFTP client (RFC 783), SSH v1.5, SCP v1.5, NTP v2 (RFC 1119), BootP client (RFC 2132), and XModem
Network Transfer
Rate 		10 Base-T (half-duplex) 10 Mbps
10 Base-T (full-duplex) 20 Mbps
100 Base-TX (half-duplex) 100 Mbps
100 Base-TX (full-duplex) 200 Mbps
1000 Base-TX (half and full-duplex) 2000 Mbps
1000 Base-SX (full-duplex) 2000 Mbps
Connector 12 RJ-45, 2 DB-9 (C-GbE2 Interconnect Kit)
8 LC fiber, 4 RJ-45, 2 DB-9 (F-GbE2 Interconnect Kit)
EMI FCC Class A
ICES-003 Class A
AS/NZS 3548 Class A
VCCI Class A
Safety UL/CUL Listed Accessory
CE
Power
Requirements		 48VDC: 2040 mA, 98 W maximum (per interconnect switch without Storage Connectivity Kit)
48VDC: 2355 mA, 113 W maximum (per interconnect switch with Storage Connectivity Kit)
Temperature
Range		 Operating 50° to 95° F (10° to 35° C)
Non-operating -22° to 140° F (-30° to 60° C)
Relative Humidity
(non-condensing)		 Operating 20% to 80%
Non-operating 5% to 95%
Wet Bulb
Temperature		 Operating 82.4° F (28° C)
Non-operating 101.7° F (38.7° C)
  NOTE: Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct sunlight. Upper operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/9,144 m or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F/45° C. Altitude maximum for storage is 70 KPa.
Operating and
Performance
Specifications for CGESM
Interconnect Switch

Dimensions

Height

10.405 in (26.43 cm)
Width

1.6 in (4.06 cm)
Depth

28 in (71.12 cm)
Weight 11.5 lb/5.2 kg per interconnect switch

Performance

 28 Gbps Maximum Forwarding Bandwidth. 38.7mpps Maximum Forwarding Rate (64 Byte Packets)
9018Bytes Jumbo Frames MTU
Non-blocking architecture. Wire Speed Performance on all ports
Auto-MDI/MDIX, auto-negotiation and auto-sensing with full-duplex support

Forwarding Mode

 Store and forward
MAC Addresses 8000 MAC/physical address Table Size
Memory 128MB DRAM Memory. 16MB Flash Memory
Compliance IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ad, IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and, IEEE 802.1D Spanning-Tree Protocol, IEEE 802.1p CoS Prioritization, IEEE 802.1Q VLAN, IEEE 802.3 10BASE-T specification, IEEE 802.3u 100BASE-TX specification, IEEE 802.3ab 1000BASE-T specification, IEEE 802.3z 1000BASE-X specification
RMON I and II standards, SNMPv1, SNMPv2c, and SNMPv3
(RFC1493) , CISCO-CDP-MIB, CISCO-CLUSTER-MIB, CISCO-CONFIG-MAN-MIB, CISCO-ENTITY-FRU-CONTROL-MIB, CISCO-ENVMON-MIB, CISCO-FLASH-MIB, CISCO-FTP-CLIENT-MIB, CISCO-IGMP-FILTER-MIB, CISCO-IMAGE-MIB, CISCO IP-STAT-MIB, CISCO-MAC-NOTIFICATION-MIB, CISCO-MEMORY-POOL-MIB, CISCO-PAGP-MIB, CISCO-PING-MIB, CISCO-PROCESS-MIB, CISCO-RTTMON-MIB, CISCO-STP-EXTENSIONS-MIB, CISCO-SYSLOG-MIB, CISCO-TCP-MIB, CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB, CISCO-VLAN-MEMBERSHIP-MIB, CISCO-VTP-MIB, ENTITY-MIB, ETHERLIKE-MIB, IF-MIB (in and out counters for VLANs are not supported), IGMP-MIB, OLD-CISCO-CHASSIS-MIB, OLD-CISCO-FLASH-MIB, OLD-CISCO-INTERFACES-MIB, OLD-CISCO-IP-MIB, OLD-CISCO-SYS-MIB, OLD-CISCO-TCP-MIB, OLD-CISCO-TS-MIB, RFC1213-MIB (per the agent capabilities specified in the, CISCO-RFC1213-CAPABILITY.my), RFC1253-MIB, RMON-MIB, RMON2-MIB, SNMP-FRAMEWORK-MIB, SNMP-MPD-MIB, SNMP-NOTIFICATION-MIB, SNMP-TARGET-MIB, SNMPv2-MIB, TCP-MIB, UDP-MIB
1000BASE-T ports, 1000BASE-X (SFP), 1000BASE-SX
Network Transfer
Rate 		10 Base-T (half-duplex) 10 Mbps
10 Base-T (full-duplex) 20 Mbps
100 Base-TX (half-duplex) 100 Mbps
100 Base-TX (full-duplex) 200 Mbps
1000 Base-TX (half and full-duplex) 2000 Mbps
1000 Base-SX (full-duplex) 2000 Mbps
Connector 4 SFP, 2 RJ-45 10/100/1000 T/TX/T, 1 DB-9
EMI FCC Part 15 Class A
EN 55022: 1998 (CISPR22)
EN 55024: 1998 (CISPR24)
CNS 13438 Class A MIC
CD
MIC
AS/NZS 3548 Class A CE
VCCI Class A
Safety UL to UL 60950, Third Edition
C-UL to CAN/CSA C22.2 No. 60950-00, Third Edition
TUV/GS to EN 60950:2000
CB to IEC 60950 with all country deviations
NOM to NOM-019-SCFI
CE Marking
Power
Requirements		 -48VDC: 1050 mA, 125 W maximum (per interconnect switch)
Temperature
Range		 Operating 50° to 95° F (10° to 35° C)
Non-operating -22° to 140° F (-30° to 60° C)
Relative Humidity
(non-condensing)		 Operating 20% to 80%
Non-operating 5% to 95%
Wet Bulb
Temperature		 Operating 82.4° F (28° C)
Non-operating 101.7° F (38.7° C)
  NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.
Operating and
Performance
Specifications for
Power Enclosures
(North America/Japan) 		   Single-Phase Model Three-Phase Model
DimensionsHeight5.25 in (13.34 cm)5.25 in (13.34 cm)
Width27.15 in (68.96 cm)27.15 in (68.96 cm)
Depth17.60 in (44.7 cm)17.60 in (44.7 cm)
WeightsNo Hot-Plug
Power Supplies
47.5 lb (21.55 kg)47.5 lb (21.55 kg)
All Hot-Plug
Power Supplies
99.5 lb (45.13 kg)125.5 lb (56.93 kg)
Input RequirementsRated input voltage200 VAC to 240 VAC200 VAC to 240 VAC line to line
Rated input frequency50 Hz to 60 Hz50 Hz to 60 Hz
Rated input current
per side		24A24A per phase
Rated input power
per side		5760 W9976 W
Power cord1 NEMA L6-30P per side1 NEMA L15-30 per side
Output Voltage
Specifications		Rated output voltage-48.8 VDC to -54 VDC-48.8 VDC to -54 VDC
Rated output current99A170A
Rated output power4298 W8310 W
Nominal power4158 W at 208 VAC7202 W at 208 VAC
Ambient Temperature
Range (See NOTE)		 Operating50° to 95° F
(10° to 35° C)		50° to 95° F
(10° to 35° C)
Shipping-22° to 140° F
(-30° to 60° C)		-22° to 140° F
(-30° to 60° C)
Relative humidity,
non-condensing
(See NOTE)		Operating20% to 80%20% to 80%
Non-operating5% to 95%5% to 95%
Wet Bulb
Temperature		Operating82.4° F (28° C)82.4° F (28° C)
Non-operating101.7° F (38.7° C)101.7° F (38.7° C)
 NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.
Operating and
Performance
Specifications for
Power Enclosures
(International) 		   Single-Phase Model Three-Phase Model
DimensionsHeight5.25 in (13.34 cm)5.25 in (13.34 cm)
Width27.15 in (68.96 cm)27.15 in (68.96 cm)
Depth17.60 in (44.7 cm)17.60 in (44.7 cm)
WeightsNo Hot-Plug
Power Supplies
47.5 lb (21.55 kg)47.5 lb (21.55 kg)
All Hot-Plug
Power Supplies
99.5 lb (45.13 kg)125.5 lb (56.93 kg)
Input RequirementsRated input voltage200 VAC to 240 VAC6.25 A at -48 VDC
200 VAC to 240 VAC line to neutral
Rated input frequency50 Hz to 60 Hz50 Hz to 60 Hz
Rated input current
per side		24A20A per phase
Rated input power
per side		5760 W10,552 W
Power cord1 IEC 309 3-pin,
32A per side		1 IEC 309 5-pin,
32A per side
Output Voltage
Specifications		Rated output voltage-48.8 VDC to -54 VDC-48.8 VDC to -54 VDC
Rated output current99A180A
Rated output power4798 W8790 W
Nominal power4598 W at 208 VAC8790 W at 230 VAC L-N
Ambient Temperature
Range (See NOTE)		 Operating50° to 95° F
(10° to 35° C)		50° to 95° F
(10° to 35° C)
Shipping-22° to 140° F
(-30° to 60° C)		-22° to 140° F
(-30° to 60° C)
Relative humidity,
non-condensing
(See NOTE)		Operating20% to 80%20% to 80%
Non-operating5% to 95%5% to 95%
Wet Bulb
Temperature		Operating82.4° F (28° C)82.4° F (28° C)
Non-operating101.7° F (38.7° C)101.7° F (38.7° C)
 NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.
Operating and
Performance
Specifications for
Power Distribution
Devices 		 Power Bus BoxMini Bus BarScalable Bus Bar
Power
Enclosures or facility DC feeds Supported
(3U each)		112
Server blade enclosures supported
(6U each)		135
Total rack height of supported enclosures9U21U36U
Dimensions   
Height5.1 in (12.95 cm)19.45 in (49.40 cm)48.57 in (123.37 cm)
Width3.6 in (9.14 cm) each19.74 in (50.14 cm)19.74 in (50.14 cm)
Depth3.25 in (8.26 cm)2.2 in (5.59 cm)2.2 in (5.59 cm)

Weight

3.62 lb (1.64 kg) 13.2 lb (5.9 kg) 26 lb (11.79 kg)
Rated Operating
Voltage
-43.2 VDC to -54 VDC-43.2 VDC to -54 VDC-43.2 VDC to -54 VDC
Max Total Power
Supported
3000 W9000 W15000 W
Total Max Input Current
At Minimum Voltage
69.44 A at -43.2VDC208.32 A at -43.2 VDC347.2 A at -43.2 VDC
(equivalent of 175A per feed)
Total Max Input Current
At Nominal Voltage 		62.5 A at -48VDC187.5 A at -48 VDC312.5 A at -48 VDC
(equivalent of 175A per feed)
Max Current Per Power Feed
70A70A210A
Max Local Ambient
Temperature
149° F (65° C)149° F (65° C)149° F (65° C)
 NOTE: All systems support redundant A & B feeds. Scalable bus bar supports dual A and dual B feeds.
Operating and
Performance
Specifications for
Facility DC

Voltage

Nominal input voltage

-48 VDC
Operating voltage range

-48VDC ± 10% or -43.2 VDC to -52.8 VDC
Max Input voltage slew rate 0.5V/uS
Redundant feed voltages*
(A & B)		 *A and B feeds must differ by no more than 5VDC during steady state operation
Ripple/Noise 480 mV PARD**
Overshoot Must remain within regulation limits on all feeds during startup or shutdown
Voltage transients

Must not exceed -60 VDC

Current

 Max steady state input current 62.5A per server blade enclosure installed at -48VDC
Max steady state current per feed/total  

Power bus boxes

 70 A/70A

Mini bus bars

 210 A/210A

Scalable bus bars

 210 A/350A or equivalent of 175A per feed*
In-rush current Must support up to 2X the maximum operating current per server blade enclosure (125 A) for up to 1.0 mS
Input over-current Customer provided fusing for facility DC feeds that protects the system from catastrophic over-current within 20 uS. Fuse should sustain all in-rush and operating currents.
Max Input Current Slew Rate 1A/uS
Max Rated Power 3000W per server blade enclosure

Connections and Cables

 Compaq provided facility DC cable connection kit:
  • The facility DC connection kit supports the connection of up to four -48VDC, RETURN pairs and ground
The power cable assemblies consist of 1/0AWG, color-coded, flexible cable rated at 105° C, terminated with bus mating connectors at one end and unterminated at the other end. The cable length provided enables the customer to route to a fuse panel within or adjacent to the rack.
  NOTE: *All systems support redundant A and B feeds. Scalable bus bars support dual A and dual B feeds.
  ** Periodic and random noise (PARD). Maximum allowable peak-to-peak ripple and noise (as measured at the load on any output channel). The ripple and noise is measured over a 20 Hz to 100 MHz frequency band. A resistive load (non-electronic) is used for this measurement. Each output is by-passed to return by a 10uF tantalum capacitor with an ESR less than 100 milli-Ohms in parallel with a 0.47 uF ceramic capacitor, at the point of load. The load cable is 12 feet of twisted wire capable of carrying the current. The printed wiring board assembly is installed in its enclosure for this measurement, or the measurement leads are properly shielded with Earth grounds applied to the insert.

© Copyright 2005 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
   DA-11567 41 - Version 41 - May 17, 2005 --- Retired on May 31, 2005