HP Integrity rx5670 Server - Worldwide QuickSpecs

Overview

HP Integrity rx5670 Server

1.	Memory Carrier 1 (4 slots)	6.	Ultra160 SCSI Hot-plug Disks
2.	Redundant, Hot-swap Fans	7.	Redundant, Hot-swap Power Supplies
3.	Core I/O Ultra160 SCSI, 10/100/1000Base-TX RS-232 and LAN Console	8.	Itanium 2 CPUs
4.	PCI-X I/O Slots	9.	Memory Carrier 2 (24 slots)
5.	Removable Media Slot

At A Glance

rx5670 Server Product Numbers

Server and one 1.3-GHz CPU
A6837B
Server and one 1.5-GHz CPU
A6838B

Standard System Features

Three Operating System support: HP-UX 11i version 2, Windows Advanced Server, and Linux
External Ultra160 LVD SCSI port
Two Internal Ultra 160 LVD SCSI controllers w/dual channels, 2 internal disks per controller
10/100/1000Base-TX LAN (with auto speed sensing; RJ-45 connector)
Management Processor for remote management and HA monitoring
Telnet and web console via 10/100Base-TX management LAN (RJ-45 connector)
Three RS-232 serial ports linked to the management processor (multiplexed from a single DB-25 port)
Factory integration of CPUs, memory, disk drives, removable media, and I/O cards
Rackmountable into 19-inch cabinets
Optional stand-alone pedestal mount
Three-year warranty with next business day on-site

Standard Features

Minimum System	One 64 bit Itanium 2-processor: either 1.3 GHz/3 MB cache or 1.5 GHz/6 MB cache 1 GB PC2100 ECC Registered DDR266A SDRAM (4×256MB DIMMs) One 24 DIMM slot memory carrier board Two power supplies

Maximum Server Capacities	Four 64 bit Itanium 2-processors: either 1.3 GHz/3 MB cache or 1.5 GHz/6 MB cache 96 GB PC2100 ECC Registered DDR266A SDRAM (48×2GB DIMMs) Two 24 DIMM slot memory carrier boards (48 DIMM slots total) Three Hotswap power supplies, providing N+1 protection for power supplies and power input Ten PCI X or PCI I/O adapter cards One internal DVD ROM or DDS 3 drive Four internal hot plug LVD SCSI disks

Standard System Features

Three Operating System support: HP UX 11i version 2, Windows Advanced Server, and Linux
Two Internal Ultra 160 LVD SCSI controllers w/dual channels; first controller supports one channel to an external port (U160 SCSI) and one channel to two internal HDDs (UltraWide SCSI), second controller supports one channel to internal HDDs (UltraWide SCSI) and one channel to internal tape or DVD bay (UltraNarrow SCSI). Please note: SCSI bus speed for the internal disk drives is 40MB/s, not the 160MB/s of the controller.
10/100/1000Base TX LAN (with auto speed sensing; RJ 45 connector)
Management Processor for remote management and HA monitoring
Telnet and web console via 10/100Base TX management LAN (RJ 45 connector)
Three RS 232 serial ports linked to the management processor (multiplexed from a single DB 25 port)
Factory integration of processors, memory, disk drives, removable media, and I/O cards
Rackmountable into 19 inch cabinets
Optional stand alone pedestal mount
Three year warranty with next business day on site

High Availability

N+1 Hotswap cooling
Two Hotswap power supplies-optional third power supply for N+1 protection
On line memory page deallocation
ECC protected DDR memory
Memory chip spare to overcome single DRAM chip failures
Dynamic Processor resilience and deallocation
UPS power management
Hot Plug internal disks
Two independent Ultra SCSI buses to internal disks for mirroring across disks and controllers
Journal file system with HP UX
Auto reboot
HP MC/ServiceGuard for HP UX
Microsoft Windows Cluster Service
HP ServiceGuard Extension for RAC for HP UX
ServiceGuard Manager for HP UX
Insight Manager 7-proactive fault management
EMS HA Monitors for HP UX
ECM Toolkit for HP UX
HP Cluster Verification Tool for Windows cluster service monitoring
HP Surestore AutoPath for HP UX
MirrorDisk for HP UX

Security	Separate LAN for system management Password protection on console port Disablement of remote console ports SSL encryption on web console

Manageability

HP Ignite UX for installation and deployment of the operating system
HP Software Distributor UX for software and patch management
HP Servicecontrol Suite for HP UX
HP TopTools for Windows and Linux
Management processor for comprehensive remote management of HP UX, Windows, and Linux
Process Resource Manager for HP UX workload management

Configuration

Processor Configuration	The HP Integrity rx5670 is a symmetrical multiprocessing (SMP) server supporting up to four high performance 64 bit Itanium 2 processors.

Processor Details	1.3 GHz or 1.5 GHz frequencies Level 3 Cache: 3 MB (1.3 GHz) or 6 MB (1.5 GHz) Level 2 Cache: 256 KB Level 1 Cache: 32 KB Single bit cache error correction 50 bit physical addressing 64 bit virtual addressing 4 GB maximum page size

Processor Configuration Rules	Processors can be installed one at a time Processors must be installed in the following sequence: 0, 1, 2, 3 1.3 GHz and 1.5 GHz processors cannot be mixed in the same system

Memory Configuration	The HP Integrity rx5670 supports DDR (double data rate) SyncDRAM (synchronous dynamic random access memory) DIMMs with ECC and chip spare protection. The HP Integrity rx5670 supports up to two 24 DIMM memory carrier boards, for a maximum of 48 DIMMs. Each memory carrier board connects to the memory controller via a 6.4 GB/s memory bus. Peak memory bandwidth across both buses and both carrier boards is 12.8 GB/s.
	Memory Loading Rules and Performance Guidelines Memory must be installed in groups of four DIMMs, also known as quads Each quad must consist of equal density DIMMs Memory can be ordered in quads of 1 GB (4×256MB), 2 GB (4×512MB), 4 GB (4×1GB), or 8 GB (4×2GB) Minimum memory is 1 GB (4×256MB) Maximum memory is 96 GB, using twelve 4 GB memory quads in both memory carrier boards Windows Server 2003 has a maximum memory configuration of 64 GB HP UX 11i version 2 and Linux have a maximum memory configuration of 96 GB Memory must be loaded in the order depicted on the memory carrier board Arrange DIMMs so that the quads with the largest capacity are in the lowest numbered slots. Each memory carrier board has its own 6.4 GB/s bus. Configure both memory carrier boards to maximize bandwidth and performance If both memory carrier boards are used, load memory equally across the carriers-alternate loading of DIMMs, in groups of four, between the two carriers.

Racking Configurations

There are two rail options, static or slider, available for racking the HP Integrity rx5670 into an HP cabinet. The slider rail enables the HP Integrity rx5670 to easily slide out of a cabinet for servicing. The slider occupies one additional EIA unit of rack space. The combination of an HP Integrity rx5670 and slider rail will consume eight EIA units of rack space. The slider also enables the hot swap of four fans in the side cavity. Slider rails are highly recommended.
Static rails are also available. Static rails do not consume EIA space within the cabinet, therefore leaving more EIA space for peripherals. However, using static rails prohibits hot swap of the I/O bay fans. Static rails should only be used when cabinet vertical space prohibits the use of slider rails.
If a rack is not required, the system can be placed in the standalone/desk side mount (A5525A).

Anti-Tip Feet	Bolt on anti tip feet are required when racking an HP Integrity rx5670 on a slider. Factory integrated cabinets will include bolt on feet with every cabinet by default. For cabinets that don't already have bolt on feet, order the bolt on anti tip feet (A5540A). Bolt on feet should always be used instead of the pull out foot stored in the cabinet base.

Cabinet Space Requirements

The HP Integrity rx5670 requires a minimum of 24 inches (61 cm) of free space in both the front and rear of the cabinet for proper ventilation. During product installation and servicing, a total of 32 inches (82 cm) of free space is needed at the front of the cabinet.
The depth of HP A490xA cabinets is 39 inches (99 cm). Therefore, a minimum of 87 inches (221 cm) of total space is needed for each cabinet during normal operation. An additional 8 inches (21 cm) is needed during installation and servicing.

Maximum Configurations	Multiple HP Integrity rx5670 systems can be installed into a HP cabinet. The maximum number of systems per cabinet is only limited by the cabinet EIA availability. A4900A – Quantity 3 HP Integrity rx5670 (with or without slider rails) A4901A – Quantity 4 HP Integrity rx5670 (with or without slider rails) A4902A – Quantity 5 HP Integrity rx5670 (with or without slider rails)

Factory Racking	HP factories can install multiple HP Integrity rx5670 systems into a single cabinet. In addition, multiple HP Integrity rx5670 configurations can be ordered within a single cabinet. Order product A5580A for factory racking with static rails. Order product A5581A for factory racking with slider rails.

Installation IntoThird-Party Cabinets/Racks	The HP Integrity rx5670 supports the same non HP racks as the rp5470.

I/O Architecture

The HP Integrity rx5670 I/O architecture utilizes industry standard PCI X and PCI buses in a unique design for maximum performance, scalability and reliability.

The HP Integrity rx5670 architecture uses eight high speed I/O channels. Each channel provides 0.5 GB/s of sustained I/O throughput. The diagram above shows how these channels are used to provide bandwidth to the ten available PCI X and PCI slots as well as to the multifunction core I/O. Note that the rx5670 backplane has twelve I/O slots, however slots #1 and #3 (counting from the bottom) will always be filled with core I/O. Slot #2 will come factory loaded with a graphics and USB card if the HP Integrity rx5670 is ordered with the Windows operating system. The VGA/USB card is optional for systems ordered with HP UX or Linux.

The three slots at the top of the backplane (#10, 11, and 12) all have their own dedicated 64 bit 133 MHz PCI X bus and their own independent 0.5 GB/s I/O channel. The highest performing I/O cards should be placed in these three slots. The independent channels provide improved I/O performance and error containment. Independence protects each I/O card from bus hangs or extended latencies due to the failure or high bandwidth demands of other I/O cards. Independence also ensures that each I/O card can achieve maximum throughput.

The next six slots (4 through 9) share three 64 bit 66 MHz PCI X buses, with two slots allocated to each bus. Each pair of slots shares a 0.5 GB/s I/O channel. If a 33 MHz card shares a bus with a 66 MHz card, the faster card will downgrade to 33 MHz.

Slot #3 is loaded with a Gigabit LAN/U160 SCSI core I/O card. Every rx5670 contains this card. A dedicated 64 bit 133 MHz PCI X bus and a dedicated 0.5 GB/s I/O channel serve this slot.

Slots #1 and #2 are also used for core I/O. Slot #1 always contains the Management Processor/U160 SCSI core I/O card. Slot #2 will be loaded with the graphics and USB card if a Windows operating system is ordered. Slot #2 is open if HP UX or Linux is ordered. The graphics and USB card is available as an option with HP UX and Linux, and it should always be placed in slot #1. If the graphics and USB card is not used, slot #1 can be used for other PCI I/O cards. Slot #1 always runs at 33 MHz.

All I/O slots are keyed for 3.3V I/O cards. 5V cards are not supported in the HP Integrity rx5670.

	Number of Slots	Bandwidth Per Slot	Bus Width	Bus Speed	Slot Keying
Dedicated	3	0.5 GB/s	64 bits	133 MHz, 66 MHz or 33 MHz	3.3 Volts
Shared	6	0.5 GB/s per pair of slots (three pairs)	64 bits	66 MHz or 33 MHz	3.3 Volts
LAN/SCSI Core	1	0.5 GB/s	64 bits	133 MHz	3.3 Volts
Management/SCSI Core	1	0.5 GB/s shared with VGA/USB	64 bits	33 MHz	3.3 Volts
VGA/USB¹	1	512 MB/s shared with Management/SCSI Core	64 bits	33 MHz	3.3 Volts

Supported I/O Cards

I/O Card	Product Number	Boot Support	Connector Type(s)	Operating Systems³	Max Cards / Max Ports	Special Notes
Mass Storage Host Bus Adapters
PCI 2 Gb/s Fibre Channel	A6795A	Yes	LC	H	10 /10
PCI 1 channel U160 SCSI	A6828A	Yes	VHDCI	H	10 /10
PCI 2 channel U160 SCSI	A6829A	Yes	VHDCI	H	10 /20
PCI Windows and Linux Ultra160 SCSI	A7059A	Yes	VHDCI	L, W	10 /10
PCI Windows Linux 2 port Ultra160 SCSI	A7060A	Yes	VHDCI	L, W	10 /20
PCI 2 channel Ultra320 SCSI	A7173A	Yes	VHDCI	H	10 /20
2 channel Smart Array 530 2 128 MB	A9825A	Yes	VHDCI	L, W	9 /18
4 channel Smart Array 5304/ 256 MB	A9826A	Yes	VHDCI	L, W	9 / 36
PCI-X 2 channel Smart Array 6402 U320	A9890A	Yes	VHDCI	H, L, W	9 /18
PCI-X 2 channel Smart Array 6404 256 MB	A9891A	Yes	VHDCI	H	9 /18
PCI X 2 Gb/s Fibre Channel	AB232A	No	LC	W	10 /10
2 Gb/s Fibre Channel	AB234A	No	LC	L	10 /10
PCI X 2 channel 2 Gb/s Fibre Channel	A6826A	No	LC	H	10 /20
PCI 1 port Ultra SCSI¹	A5149A	No	VHDCI	H	10 /10
PCI 2 port Ultra SCSI¹	A5150A	No	VHDCI	H	10 /20
Local Area Network (LAN) Adapters
PCI 1 port 1000Base-T (gigabit copper)	A6825A	No	RJ-45	H	10 /10
PCI 1 port 1000Base-SX (gigabit fiber)	A6847A	No	Duplex SC	H	10 /10
PCI 1 port 10/100Base-TX	A5230A	No	RJ-45	H	10 /10
PCI 4 port 100Base-TX	A5506B	No	RJ-45	H	10 /40
PCI 1 port 802.5 Token Ring 4/16/100	A5783A	No	RJ-45 and DB 9	H, L	10 /10
PCI 1 port Universal FDDI LAN	A3739B	No	FDDI SC	H	10 /10
PCI 1 port 1000Base-T	A7061A	No	RJ-45	H	10 /10
PCI 1 port 1000Base-SX	A7073A	No	Duplex SC	H	10 /10
PCI -X 2 port 4x Fabric (HPC) Adapter²	AB286A	No	4x Infiniband Copper	L, W	10 /20
Multi-Function Cards (Mass Storage/LAN)
PCI 2 port 100Base T/ 2 port Ultra2 SCSI¹	A5838A	No	VHDCI/RJ-45	H	10 /40
PCI-X 2Gb Fibre Channel / 1000BaseSX	A9782A	Yes	LC	H	10 /20
PCI-X 2Gb Fibre Channel / 1000BaseTX	A9784A	Yes	1 LC, 1 RJ-45	H	10 /20
Wide Area Network (WAN) Adapters
PCI 1-port ATM 155 Mbps (MMF)	A5513A	No	Duplex SC	H	10/10
2 port Programmable Serial Interface (PSI) X.25 / Frame Relay / SDLC	J3525A	No	RS-530, RS-232, V.35, RS-449 or X.21	H	10 /20
Additional Interface Cards
Graohics / USB Card	A6869A	No		H, W, L	10 /10
PCI 64-port Terminal Multiplexer	A3593A	No	RS-232 or RS-422	H	10/640
PCI 8-port Terminal Multiplexer	A3592A	No	RS-232	H	10 /80
PCI HyperFabric 2 Fibre¹	A6386A	No	LC Duplex	H	10 /10

¹ Ultra2 SCSI cards do not support boot or MC/Serviceguard
² A minimum 512 MB of system memory per card is required for performance considerations.
³ Operating Systems Legend H=HP-UX, W= Windows, L=Linux

Special Note on the Smart Arry 5302 and 5304 Smart Array RAID controller
The Smart Array controllers do not automatically rebuild the internal HDD array when a failed drive is replaced. HP expects to provide auto rebuild capability in Q4 2003. Until that time, customers can deploy one of the following workarounds:
1. Reboot the server to begin the rebuild process after the failed drive is replaced.
2. Connect the second channel to the other side of the disk backplane and utilize the Hot Spare feature of the Smart Array (this will require an additional HDD). See the Smart Array User Guide for more details on setting up the Hot Spare feature.
3. Existing HP Server rx5670 customers currently using the NetRAID 2M card with Windows may continue to use their existing controller for internal RAID. The NetRAID 2M will automatically detect a failed drive when it is replaced and begins the rebuild process. This workaround is not available with Linux, as the NetRAID 2M card is not supported in the Linux operating system.

Integrated Multi-function Core I/O

The integrated multifunction I/O provides core I/O functionally and includes the management processor, which provides remote management and high availability monitoring capabilities.

10/100/1000Base T LAN with RJ 45 connector-Supports LAN boot for operating system installation
External LVD Ultra160 SCSI (160 MB/s) port (Ultra160 is backward compatible with LVD Ultra2 and with SE SCSI)-Order the appropriate cable to connect to external peripherals, example: VH to HD cable
Two internal dual-channel Ultra160 SCSI controllers. One channel per internal disk pair and one channel for the removable media bay.

Integrated Management Processor Functionality

Dedicated 10/100Base T LAN port for LAN console and embedded web console access
DB 25 serial port-multiplexed (using W cable) into three RS 232 ports: local ASCII console, remote/modem console, and general purpose
Password protected console ports
Console mirroring between all local, modem, LAN, and web consoles
Remote power up and power down control
Configurable remote access control
Event notification to system console-Provides connectivity, information, and support for HP UX tools (such as STM and EMS) to notify by email, pager and/or HP response centers.
Interface to system monitoring and diagnostic hardware via an internal IC bus
Secure Sockets Layer security on web console
The Enhanced Manageability Card provides basic graphic capabilities via integrated Radeon 7000 2D graphics chip. VGA port is provided on rear of the system. Supported resolutions and refresh rates include:

Operating System	Minimum Resolution	Refresh Rate	Maximum Resolution	Refresh Rate
HP-UX	1024x768	75 Hz	1920x1200	75 Hz
Linux	1024x768	75 Hz	1920x1200	75 Hz
Windows	640x480	75 Hz	1600x1200	75 Hz

Internal Disk Drives

The HP Integrity rx5670 supports up to four internal low profile or half height hot plug disk drives.
Two Ultra160 SCSI controllers provide each disk drive pair with an independent SCSI channel
Supported by MirrorDisk/UX across both disk drives and controllers
Supports Smart Array 5302 and 5304 Ultra160 SCSI RAID with Windows and Linux operating system. Order internal Smart Array cables for the rx5670 (A9828A) to connect Smart Array card to internal drives
36 GB 15K, 73 GB 15K, and 146 GB 10K hot plug disks are supported

System Console Configurations

The HP Integrity rx5670's integrated Management Processor provides five methods for console connections.

SSL secured Web console accessible through the 10/100Base T management LAN
Standard telnet connections accessible through the 10/100Base T management LAN
Local VT100 or hpterm terminal, or VT100 or hpterm emulator via local RS 232 serial connection
Remote VT100 or hpterm terminal, or VT100 or hpterm emulator via external modem
VGA graphics console using the A6869A graphics card - supported on Windows, Linux, and HP UX

HP Integrity rx5670 Power Subsystem

The HP Integrity rx5670 provides a high level of integrated power protection:

N+1 redundant hotswap power supplies
N+1 redundant AC power input protection with electrical phase isolation
Power monitoring and control

The HP Integrity rx5670 supports up to three hotswap power supplies for N+1 protection. Two supplies are shipped as standard and are required for correct system operation. The hotswap design allows for the online replacement of a power supply when N+1=3 supplies are configured in the server.

The HP Integrity rx5670 provides an independent power input receptacle for each power supply. The independent design provides protection against losing the connection from a power cord or breaker. The HP Integrity rx5670 power cords should always be plugged into separate breakers when possible.

The chart below displays the AC power needs of the HP Integrity rx5670 at various configurations. These power figures are based on actual measurements under typical server workloads, and are appropriate for power budgeting at customer installations. Theoretically, a maximum configuration can draw up to 2,089 Watts AC. Power consumption at the theoretical maximum is unlikely in typical server applications.

HP Integrity rx5670 AC Power Requirements at Various Configurations
Processors	DIMMs	I/O Cards	Volt Amps	Watts, AC	Amps @ 115V	Amps @ 230V
1	4	2	510	500	4.4	2.2
1	16	6	595	583	5.2	2.6
1	32	10	690	676	6.0	3.0
2	4	2	575	563	5.0	2.5
2	16	6	673	660	5.9	2.9
2	32	10	784	768	6.8	3.4
4	4	2	707	693	6.2	3.1
4	16	6	803	787	70.	3.5
4	32	10	914	896	8.0	4.0
4	48	10	971	952	8.5	4.2

Technical Specifications

Server model number	rx5670

Server product numbers	Server and one 1.3 GHz processor	A6837B
	Server and one 1.5 GHz processor	A6838B
	Number of Processors	1-4

Supported Processors	1.3-GHz Intel® Itanium® 2 processor
	Cache	3 MB
	Floating Point Coprocessor included	Yes
	TPM estimate (4-processor configuration)	100 K
	1.5-GHz Itanium 2 processor
	Cache	6 MB
	Floating Point Coprocessor included	Yes
	TPM estimate (4-processor configuration)	120 K

System Memory	Minimum memory	1 GB
	Maximum memory capacity	96 GB

Internal Disks	Max. disk mechanisms	4
	Max. disk capacity	438 GB

Standard Integrated I/O	Ultra160 SCSI-LVD	Yes
	10/100/1000Base-T (RJ-45 connector)	Yes
	RS-232 serial ports (multiplexed from DB-25 port)	3
	10/100Base-T management port (RJ-45 connector)	Yes

I/O buses and slots	Total PCI X and PCI Slots	10
	3 133 MHz, 64 bit slots on 3 dedicated PCI X buses
	6 66 MHz, 64 bit slots distributed on 3 PCI X buses; 2 slots per bus
	1 33 MHz, 32 bit PCI slot; recommended for graphics card

Maximum I/O Cards (See supported I/O table for product specifics)	Mass Storage	9-10
	LAN	10
	WAN	10
	Multi-Function (Mass Storage / LAN)	10
	Additional Interface Cards	2-10

Electrical Characteristics	AC Input power	100 240V 50/60 Hz
	Hotswap Power supplies	2 included, 3rd for N+1
	Redundant AC power inputs	2 included, 3rd for N+1
	Typical current requirements at 230V	5 A (shared across inputs)
	Typical maximum power dissipation	952 Watts
	Theoretical maximum power dissipation	2,089 Watts
	Power factor at full load	0.98
	Typical Heat dissipation (BTUs/hour)	3,250
	Maximum Heat dissipation (BTUs/hour)	7,135

Site Preparation	Site planning and installation included	No
	Depth (in/mm)	30.5 in (774 mm)
	Width (in/mm)	19 in (482 mm)
	Rack Height (EIA/in/mm)	7 U/12.25 in/322 mm
	Pedestal Height (in/mm)	14.5 in (368 mm)
	Weight (lb/kg) Maximum	160 lb (73 kg)

Environmental Characteristics	Acoustics (operator/bystander) at 77° F/25° C)	<7.5 Bels LwA
	Operating Temperature (up to 5000 ft/1524 m*	41° to 95° F (5° to 35° C)
	Non-operating Temperature	-40° to 158° F (-40° to 70° C)
	Maximum rate of temperature change	50° F (10° C)/hour
	Operating relative humidity	15% to 80% RH non-condensing
	Non-operating relative humidity	5% to 90% non-condensing
	Operating altitude above sea level	1,0000 ft (3,000 m) maximum
	Non-operating altitude above sea level	1,5000 ft (4,600 m) maximum
*Max operating temperature range up to 5000 ft. For higher altitudes de rate the max temperature by 2°C/1000 ft above 5000 ft.

Regulatory Compliance	Electromagnetic Interference	Complies with FCC Rules and Regulations, Part 15 as a Class A digital device. Manufacturer's Declaration to EN55022 Level A, VCCI Registered, Class A, Korea RLL
	Safety	UL Listed, CSA Certified, TUV GS Mark compliant with EN 60950 and EN 41003

The information contained herein is subject to change without notice.

Intel and Itanium are registered trademarks or trademarks of Intel Corporation in the U.S. and/or other countries.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

DA-11719 - Worldwide - Version 11 - April 7, 2006