  |
Overview
|
|
Overview
|
HP NC1020 PCI 1000T Gigabit Server Adapter
|
||||||
| Models | |
| HP NC1020 PCI 1000T Gigabit Server Adapter |
353377-B21
|
| Kit Contents | HP NC1020 PCI 1000T Gigabit Server Adapter |
| CD containing Drivers, User Guide, and Installation and Diagnostic Utilities | |
| Quick Install Card | |
| Product Quality Statement | |
| Product Warranty Statement | |
| NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA0-6064ENW.pdf. | |
|
|
Performance
| Gigabit Ethernet Throughput | Up to 1000Mbps Ethernet transfer rate delivers outstanding network performance that improves response time and removes bottlenecks across the entire network. |
|
|
|
| Load Balancing | Transmit Load Balancing (TLB) and Switch-Assisted
Load Balancing (SLB) are two advanced features used to build a bigger pipe
for improved networking bandwidth. These port bonding techniques enable
users to install up to eight NC1020 adapters in a HP ProLiant server and
aggregate their throughput up to a theoretical maximum of 16 Gigabits per
second full-duplex transmission.
The NC1020 can be configured to work with other NC-series Ethernet server adapter teams supported on HP ProLiant servers, when running under Microsoft Windows, Linux, or NetWare operating systems. If Large Send Offload (LSO) is enabled, the NC1020 can only team in Microsoft Operating Systems with another NC1020 or a NC7761. If LSO is disabled, the NC1020 can team with all of HP ProLiant NC-Series NICs without problems. |
|
|
|
| Scalability and Reliability | |
| Tri-Speed Support | Because the NC1020 supports 10Mbps Ethernet and 100Mbps Fast Ethernet in addition to Gigabit Ethernet, users are guaranteed end-to-end protocol support across their enterprise. Like all HP server adapters, the NC1020 adheres to open industry standards, insuring that it will work seamlessly with any network devices that also support IEEE standards. |
|
|
|
| Traditional PCI slot | The NC1020 is specified to run in either 33 or 66MHz PCI slots. If customers want to place it into 64-bit, 66/100/133MHz slots, they can do so with the potential for performance degradation. |
|
|
|
| Network Fault Tolerance (NFT) | Network Fault Tolerance, sometimes called
"failover" or "NIC redundancy", allows for the installation
of multiple NC1020 server adapters or other network adapters so that the
active device can be backed up by a redundant adapter to improve availability.
HP's teaming utility also allows users to specify that when a failed adapter
is fixed and replaced, the original adapter resumes its function as the
primary network connection. The NC1020 can be configured to work with other NC-series Ethernet server adapter teams supported on HP ProLiant servers, when running under Microsoft Windows, Linux, or NetWare operating systems. If Large Send Offload (LSO) is enabled, the NC1020 can only team in Microsoft Operating Systems with another NC1020 or a NC7761. If LSO is disabled, the NC1020 can team with all of HP ProLiant NC-Series NICs without problems. |
|
|
|
| PCI Hot Plug | The NC1020 ships with PCI Hot Plug support, which enables it to be replaced or added to a PCI Hot Plug compatible server without powering down the system. This feature provides increased system availability and non-stop serviceability in business-critical computing environments. |
|
|
|
| Operating System Support |
NOTE: For more Linux OS support & certification information, please visit our the ProLiant & BladeSystem Server Linux matrix: http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert.html |
|
| |
| Warranty | Maximum | The remaining warranty of the HP product in which it is installed (to a maximum three-year, limited warranty). |
| Minimum | One year limited warranty. | |
|
|
||
| Network Management | |
| Auto-negotiation | The NC1020 automatically senses and configures itself to the speed of the device to which it is attached. It also automatically configures for half or full duplex, depending on the duplex mode of the switch, hub, or router at the other end of the cable. |
|
|
|
| Management Support | Like all HP server adapters, the NC1020 ships with drivers and agents that can be managed from all versions of HP Insight Manger 7, as well as using any management application that supports SNMP. |
|
|
|
| Server Integration | HP's SmartStart configuration utility includes setup support for the NC1020 so the adapter can be configured as part of the SmartStart configuration process. HP Insight Manager can recognize the NC1020 individually or in port-bonded teams, and can collect and report SNMP statistics on the adapter events. Additionally, Integrated Management Log (IML) support is provided by the NC1020 for critical event logging on HP servers. |
|
|
|
| Configuration Utilities | Each NC1020 ships with a suite of OS-tailored configuration utilities that allow the user to run initial diagnostics and configure adapter teams for Network Fault Tolerance, Transmit Load Balancing, or Switch-Assisted Load Balancing (Dynamic 802.3ad) in the Windows®, Linux, or NetWare operating systems. |
|
|
|
| LED Indicators | Bracket LED indicators show link integrity, network activity, and network speed for easy troubleshooting. |
|
|
Related Options
| Additional Gigabit Server Adapters | HP NC110T PCI Express Gigabit Server Adapter NOTE: Does not support Windows 2000. |
434905-B21
|
| HP NC360T PCI Express Dual Port Gigabit Server Adapter |
412648-B21
|
|
| HP NC364T PCI Express Quad Port Gigabit Server
Adapter NOTE: Does not support Windows 2000. |
435508-B21
|
|
| HP NC373F PCI Express Multifunction Gigabit Server Adapter |
394793-B21
|
|
| HP NC373T PCI Express Multifunction Gigabit Server Adapter |
394791-B21
|
|
| HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter |
394795-B21
|
|
| HP NC7170 PCI-X Dual Port 1000T Gigabit Server Adapter |
313881-B21
|
|
| HP NC7170 PCI-X Low Profile Dual Port 1000T Gigabit Server Adapter |
383738-B21
|
|
| HP NC7771 PCI-X 1000T Gigabit Server Adapter |
290563-B21
|
|
| Combo Switch Adapter | HP NC150T PCI 4-port 1000T Gigabit Combo Switch Adapter |
367132-B21
|
|
| 10 Gigabit Server Adapters | HP NC510C PCIe 10 Gigabit Server Adapter NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510C adapter. |
414129-B21
|
| HP NC510F PCIe 10 Gigabit Server Adapter NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510F adapter. |
414126-B21
|
|
|
Technical Specifications
| Compliance | IEEE 802.3, 802.3u,
Dynamic 802.3ad, and 802.3ab, 802.1x, 802.1Q and 802.1p PCI 2.3 ACPI v1.1a |
||
| General Specifications | Communications Processor |
Broadcom 5705 | |
| On-board memory | 64KB | ||
| Data rate | 10/100/1000 Mbps, Half- and full-duplex | ||
| Data path | The NC1020 is specified to run in either 33 or 66MHz PCI slots. Customers may put it into 64-bit, 66/100/133MHz slots with the potential for performance degradation. | ||
| Interrupt levels | INTA | ||
| Connector | RJ-45 | ||
| Distance | Up to 328 ft (100 m) | ||
| Wiring | Category 5 or higher UTP | ||
| Dimensions (LxW) | 4.7 x 2.0 inches (L x W), 11.938 cm x 5.08 cm | ||
| Power and Environmental Specifications | Operating | Temperature | 32° to 131° F (0° to 55° C) |
| Humidity | 5% to 95% non-condensing | ||
| Non-operating | Temperature | -40° to 149° F (-40° to 65° C) | |
| Humidity | 5% to 95% non-condensing | ||
| Power requirement | Operating Voltage: 3.3V +/- 5% | ||
| Maximum Power Consumption: 2.5 Watts | |||
| Maximum: 750 mA @ 3V(DC) | |||
| Emissions Classifications | Class B | ||
| Agency Approvals | USA: FCC (CFR 47 part 15) and
UL 60950 Canada: ICES-003 and CSA60950 Japan: VCCI Korea: MIC (RRL), EMC Registration Australia: ACA, AS/NZS3548/EN55022:1998, EN55024:1998 EU: EN55022:1998 (CISPR 22), EN55024:1998, and IEC60950:1999 (EN60950:2000) |
||
|
|
|||
| Environment-friendly Products and Approach | End-of-life Management and Recycling |
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment. |
|
|
|
|||
|
© Copyright 2007 Hewlett-Packard Development Company, L.P. |
