• Emulex based Dual port Fibre Channel HBA
  
• HP McDATA 4 Gb SAN Switch for HP p-Class BladeSystem
  
• Brocade 4Gb SAN Switch for HP p-Class BladeSystem

• Maximum density HP ProLiant BL30p server blade
  • High density, dual-processor capable server blade for the ProLiant BL p-Class
  • Up to two Intel Xeon 3.2-GHz/533-MHz with 2MB L3 cache processors
    
  • ServerWorks GC-LE chipset
    
  • 1024-MB PC2100-MHz Registered ECC DDR memory (1 x 1-GB), expandable to 4-GB, flex memory supports interleaved and non-interleaved memory configurations
  • Integrated Lights-Out (iLO) Advanced Pack with new static IP bay configuration and HP BladeSystem wizard features
  • Two (2) NC7781 PCI-X Gigabit NICs (embedded)
  • One 10/100T NIC (embedded) dedicated to iLO management
  • Supports up to two optional small form factor ATA 60-GB hard drives
  • BIOS-Enhanced RAID for Linux enables both primary and secondary hard drives to be bootable
  • Dual-Port Fibre Channel Adapter (2-Gb) option for SAN connectivity
  • HP ProLiant BL30p server blade plugs vertically into blade sleeve and sleeve plugs into 6U blade enclosure
    
  • Local I/O cable provides two USB ports, one video port, one iLO port and serial port
    
  • Integrated Access Tool for blade management and enhanced server blade documentation including Best Practices and Common Procedures guides
    
  • Up to 96 HP ProLiant BL30p server blades fit in 42U rack in non-redundant power configuration; up to 80 HP ProLiant BL30p server blades fit in 42U in full power redundant configuration
    
• HP BladeSystem p-Class Enhanced Server Blade Enclosures
  
  • Blade iLO signals are physically consolidated to an RJ-45 port on the server blade management module
    
  • Option kit available for field upgrade of backplanes to existing, deployed blade enclosures
    
  • Each server blade enclosure is 6U and holds up to 16 HP ProLiant BL30p server blades (HP BladeSystem p-class blade sleeve is required for each pair of HP ProLiant BL30p server blades installed)
    
  • Types of interconnects available: GbE Interconnect Switches, GbE2 and CGESM Interconnect Switches with optional Fibre Channel pass through, Patch Panels or Patch Panel 2 with Fibre Channel pass through
• HP BladeSystem p-Class Power Enclosures
  • HP BladeSystem p-Class rack-centralized power enclosure holds hot-plug power supplies
  • Choose the HP BladeSystem p-Class 3U power enclosure or the HP BladeSystem p-Class 1U power enclosure
  • Use BL p-Class sizing tool to determine power and cooling requirements based on your desired configuration:
    http://h30099.www3.hp.com/configurator/calc/Power%20Calculator%20Catalog.xls
  • 3 phase power enclosure highly recommended for BL30p deployments
  • HP BladeSystem p-Class power enclosures with power supplies not needed if using facility -48VDC ± 10% (Facility DC option kit required)
• HP BladeSystem p-Class Power Distribution (only required with the 3U power enclosure)
  
  • Carries power from the power enclosure(s) to the server blade enclosures
  • Three power distribution choices:
    • mini bus bars (support up to 3 blade enclosures)
    • scalable bus bars (support up to 5 blade enclosures)
    • power bus box (supports a single blade enclosure)
• New dual power input option kit allows support for two power enclosures on mini bus bars
• Server blade enclosures, interconnects and power enclosures protected by a limited three year warranty with optional service uplifts available.
• HP ProLiant BL30p Server Blade Limited Warranty includes 3 year Parts, 1 year Labor, 1-year on-site support.

NOTE: All ATA hard drives offered by HP carry a one year warranty regardless of the base system in which they are installed.
NOTE: Power requirements for a ProLiant BL p-Class system: 200V - 240V AC, 30 amp or facility DC -48V ± 10%.

• For a complete HP ProLiant BL30p server blade solution, do the following:

1. Select desired model, configuration and quantity of HP ProLiant BL30p server blades
   
   PLUS
   
2. Determine how many HP BladeSystem p-Class blade sleeves are required. Each p-Class blade sleeve holds two HP ProLiant BL30p server blades and one server blade enclosure holds up to eight sleeves.
   
   PLUS
   
3. Determine how many HP BladeSystem p-Class Enhanced Server Blade Enclosures are required. Each enhanced server blade enclosure can hold up to 16 HP ProLiant BL30p server blades.
   
   NOTE: HP BladeSystem p-Class enhanced server blade enclosures are required to support HP ProLiant BL30p server blades.
   Enhanced server blade enclosures can be purchased with licenses for Rapid Deployment Pack:
   HP BladeSystem p-Class enhanced server blade enclosure with 8 Rapid Deployment Pack licenses (281404-B22)
   Or
   HP BladeSystem p-Class enhanced server blade enclosure with Rapid Deployment Pack trial (243564-B22)
   Or
   HP BladeSystem p-Class server blade enclosure with the HP BladeSystem Management Suite which is delivered in a convenient to purchase pack that includes a single copy of Systems Insight Manager (SIM) and 8 licenses for each of the following products: Rapid Deployment Pack (RDP) Performance Management Pack (PMP) and the Vulnerability and Patch Management Pack (VPM). (380625-B22)
   
   PLUS
   
4. Select an Interconnect Kit. Each Interconnect Kit contains a pair of interconnects except the CGESM which includes a single interconnect switch. One interconnect kit is required with each server blade enclosure:
   RJ-45 Patch Panel 2 with Fibre Channel pass through. This is the required patch panel model for Fibre Channel connectivity on HP ProLiant BL30p server blade (306465-B21).
   Or
   RJ-45 Patch Panel (230766-B21)
   Or
   Quantity (2) Cisco Gigabit Switch Module for HP BladeSystem p-Class Interconnect Kit (with 16 10/100/1000 T/TX/T downlink ports, 2 RJ-45 10/100/1000 T/TX/T uplink ports, and 4 SFP ports) (378926-B21), with or without any combination of up to 4 10/100/1000 T/TX/T RJ-45 SFP Module (378928-B21) or 1000BASE SX Fiber SFP Module (378929-B21), with or without ProLiant BL p-Class Storage Connectivity Kit (with 16 Fibre Channel connectors) (321745 -B21) (required for ProLiant BLXXp server blade Fibre Channel connectivity when using the CGESM Interconnect Switch)
   Or
   Quantity (2) Cisco Gigabit Switch Module for HP BladeSystem p-Class Interconnect Kit (with 16 10/100/1000 T/TX/T downlink ports, 2 RJ-45 10/100/1000 T/TX/T uplink ports, and 4 SFP ports populated with (2) 10/100/1000 T/TX/T SFP modules) (378927-B21), with or without optional ProLiant BL p-Class Storage Connectivity Kit (with 16 Fibre Channel connectors) (321745 -B21) (required for ProLiant BLXXp server blade Fibre Channel connectivity when using the CGESM Interconnect Switch)
   Or
   BL p-Class C-GbE2 Interconnect Kit (with 16 10/100/1000 T/TX/T downlink ports, 6 RJ-45 10/100/1000 T/TX/T uplink ports ) (283192-B21), with or without optional ProLiant BL p-Class Storage Connectivity Kit (with 16 Fibre Channel connectors) (321745 -B21) (required for ProLiant BLXXp server blade Fibre Channel connectivity when using the GbE2 Interconnect Switch)
   Or
   BL p-Class F-GbE2 Interconnect (with 16 10/100/1000 T/TX/T downlink ports, 4 LC 1000 SX and 2 RJ-45 10/100/1000 T/TX/T uplink ports) (283193-B21), with or without optional ProLiant BL p-Class Storage Connectivity Kit (with 16 Fibre Channel connectors) (321745 -B21) (required for ProLiant BLXXp server blade Fibre Channel connectivity when using the GbE2 Interconnect Switch)
   
   PLUS
   
5. Select HP BladeSystem p-Class power enclosure(s) and power supplies based on configuration.
   NOTE: 3 phase power enclosure options are highly recommended for deployments of HP ProLiant BL30p server blades.
   Use the ProLiant BL p-Class sizing utility to help determine power configuration: http://h30099.www3.hp.com/configurator/calc/Power%20Calculator%20Catalog.xls .
   NOTE: Power enclosures and supplies are not needed if using facility DC (-48V ± 10%).
   Single phase 3U power enclosure with four power supplies (Single-phase 3U power enclosure holds a maximum of four power supplies) (NA/JPN- 239162-001) (INTL - 239162-421)
   Or
   Three-phase 3U power enclosure with six power supplies (Three-phase 3U power enclosure holds a maximum of six power supplies) (NA/JPN- 230769-001) (INTL - 230769-421)
   (3U Power enclosures and supplies can also be purchased separately see options list)
   Or
   1U power enclosure with six power supplies (378284-B21)
   Or
   1U power enclosure with two power supplies (380314-B21)
   (Additional power supplies can also be purchased separately - see options list)
   
   PLUS
   
6. Select power distribution option (only required with 3U power enclosures):
   Mini bus bars (support up to 3 server blade enclosures) (240559-B21).
   NOTE: Two mini-bar configurations can be stacked to fill a 42U rack.
   Or
   Scalable bus bars (support up to 5 server blade enclosures*) (240560-B21)
   Or
   Power Bus Box (supports a single server blade enclosure*) (240562-B21)
   Or
   Dual Power Input Kit for Mini Bus Bar - required for support of two power enclosures. (364565-B21)
   Or
   HP Modular Distribution Unit 40 Amp (NA/JPN) (P/N 252663-D75)**
   Or
   HP Modular Distribution Unit 40 Amp (Int'l) (P/N 252663-B34)**
   Or
   HP Modular Distribution Unit 32 Amp (Int'l) (P/N 252663-B33)**
   Or
   HP Modular Distribution Unit 24 Amp (NA/JPN) (P/N 252663-D74)**
   *NOTE: Maximum depends upon power input
   **NOTE: The Modular Distribution Unit Kits excludes the extension bars as they are not required with the HP BladeSystem p-class 1U power enclosure.

• The Dual-Port Fibre Channel Adapter option 354054-B21 is compatible with the HP ProLiant BL30p server blade (not compatible with HP ProLiant BL20p server blades series)
• Two ports on each configured blade provide redundant Fibre Channel connections
• Supports up to 2 Gb/s Fibre Channel equipment
• Based on the QLogic ISP2312 chipset
• Kit includes two small form factor pluggable transceivers with LC connectors for installation into the interconnect option kit (see 2A and 2B below)

  AND

• Enables pass through of both Ethernet and Fibre Channel signals
• Ethernet signals exit the rear of the RJ-45 Patch Panel 2 interconnects
• Fibre Channel signals exit the front of the RJ-5 Patch Panel 2 interconnects
  • 8 Fibre Channel small form factor pluggable (SPF) transceiver cages on the front of each Patch Panel 2 interconnect (16 Fibre Channel SPF transceiver cages per server blade enclosure)
  • SPF transceivers are included with the BL30p Dual-Port Fibre Channel Adapter kit (option)

  
  OR

• Enables Ethernet signal consolidation and pass through of Fibre Channel signals
• Both Ethernet and Fibre Channel signals exit the rear of the CGESM or GbE2 Interconnect Switch (with the Storage Connectivity Kit option)
  • 8 Fibre Channel small form factor pluggable (SPF) transceiver slots on the back of each Interconnect Switch (16 Fibre Channel SPF transceiver cages per server blade enclosure)
  • SPF transceivers included with the BL30p Dual-Port Fibre Channel Adapter kit (option)

AND

• Optimized for StorageWorks arrays:
  • Modular Smart Array 1000
  • Enterprise Virtual Array 5000 (EVA5000) V2; Enterprise Virtual Array 3000 (EVA3000)
    
  • XP48, 128, 512, 1024;
• Compatible with select 3rd party SANs. Refer to blade storage website for details:
  http://h18000.www1.hp.com/products/servers/proliant-bl/p-class/storage.html

Holds up to:

• Eight (8) HP ProLiant BL20p server blades series
  
• Sixteen (16) HP ProLiant BL30p server blades series (HP ProLiant BL30p server blade sleeves required)
  
• Two (2) HP ProLiant BL40p server blades series
  
• A combination of the above

NOTE: HP BladeSystem p-Class enhanced server blade enclosures are required to support HP ProLiant BL30p server blades. See compatibility matrix: http://www.hp.com/go/bladesystem/enclosure/compatibility.
NOTE: Server Blade Enclosure Upgrade Kit (354100-B21) contains enhanced backplane components and enables a field upgrade of a blade enclosure to support HP ProLiant BL30p server blades series and provide a single, physical iLO port for the enclosure.

(Each HP BladeSystem p-Class server blade enclosure requires a pair of interconnects - patch panels or interconnect switches)

The Cisco Gigabit Ethernet Switch Module (CGESM) Interconnect Kit is for applications that require network adapter consolidation to 1000 Mbps (Gigabit Ethernet) in a Cisco infrastructure. The CGESM supports the same and HP ProLiant BL30p Fibre Channel pass-through as the GbE2.

• The Cisco Gigabit Ethernet Switch Module Interconnect kit includes one CGESM Interconnect Switch or one CGESM Interconnect Switch populated with two (2) RJ-45 10/100/1000 T/TX/T Small Form Factor Pluggable (SFP) Modules.
  
• Quantity 2 Cisco Gigabit Ethernet Switch Module Interconnect kits provide two CGESM Interconnect Switches providing any combination of up to twelve (12) RJ-45 10/100/1000 T/TX/T or Fiber SX external ports per server blade enclosure.
  The optional ProLiant BL p-Class Storage Connectivity Kit (321745 -B21) is required for HP ProLiant BL30p Fibre Channel pass-through when using either the CGESM Interconnect Kit.

The GbE2 Interconnect Kits (C-GbE2 and F-GbE2) provide NIC consolidation to 1000 Mbps (Gigabit Ethernet), advanced network feature, Fibre Channel pass-through (for HP ProLiant BL20p server blade series and HP ProLiant BL30p server blades series), and 1 Gigabit Ethernet bandwidth connectivity to the network.

• The ProLiant BL p-Class F-GbE2 Interconnect Kit includes two GbE2 Interconnect Switches and two QuadSX Interconnect Modules that provide eight (8) LC 1000 SX and four (4) RJ-45 10/100/1000 T/TX/T external ports per server blade enclosure.
• The ProLiant BL p-Class C-GbE2 Interconnect Kit includes two GbE2 Interconnect Switches and two QuadT2 Interconnect Modules that provide twelve (12) RJ-45 10/100/1000 T/TX/T external ports per server blade enclosure.
• The optional ProLiant BL p-Class Storage Connectivity Kit (321745 -B21) is required for Fibre Channel pass-through when using either the C-GbE2 or F-GbE2 Interconnect Kit.

The GbE Interconnect Kits (C-GbE and F-GbE) provide NIC consolidation to 100 Mbps (Fast Ethernet).

• The ProLiant BL p-Class F-GbE Interconnect Kit includes two GbE Interconnect Switches and two DualTSX Interconnect Modules that provide four (4) LC 1000 SX and eight (8) RJ-45 10/100 T/TX external ports per server blade enclosure.
• The ProLiant BL p-Class C-GbE Interconnect Kit includes two GbE Interconnect Switches and two QuadT Interconnect Modules that provide four (4) RJ-45 10/100/1000 T/TX/T and eight (8) RJ-45 10/100 T/TX external ports per server blade enclosure.

• One (1) RS-232 DB-9 front panel out-of-band management port
• Redundant crosslink ports connecting the two interconnect switches
• Redundant power inputs and on-board redundant fans
• Hot-plug and hot- remove with configuration retention and no need to cable/re-cable
• Power ON, management, and per port status and speed LED indicators
• Reset/power momentary push-button switch
• HP ProLiant BL Interconnect Switch Management Utilities and User Documentation CD
• Fully pre-configured for rapid deployment and immediate operation

The GbE Interconnect Kits (C-GbE and F-GbE) are for applications that require network adapter consolidation to 100 Mbps (Fast Ethernet).

• The ProLiant BL p-Class F-GbE Interconnect Kit includes two GbE Interconnect Switches and two DualTSX Interconnect Modules that provide four (4) LC 1000 SX and eight (8) RJ-45 10/100 T/TX external ports per server blade enclosure.
• The ProLiant BL p-Class C-GbE Interconnect Kit includes two GbE Interconnect Switches and two QuadT Interconnect Modules that provide four (4) RJ-45 10/100/1000 T/TX/T and eight (8) RJ-45 10/100 T/TX external ports per server blade enclosure.

(Each server blade enclosure requires a pair of interconnects - patch panels or interconnect switches)

(Each server blade enclosure requires a pair of interconnects - patch panels or interconnect switches)

NOTE: Either Patch Panel 2 or a Switch Interconnect Kit is required for SAN connectivity with HP ProLiant BL20p server blade series and HP ProLiant BL30p server blades series.

HP BladeSystem p-Class 3U power enclosure provides scalable rack-centralized, hot-plug power without the need for PDUs.
Each 3 phase power enclosure houses six hot-plug power supplies
Each single-phase power enclosure holds four hot-plug power supplies
Please use the sizing utility to determine the power needed for each configuration
http://www.hp.com/go/bladesystem/powercalculator
NOTE: 3 phase power enclosure options highly recommended for HP ProLiant BL30p server blade deployments.

HP BladeSystem p-Class 1U power enclosure provides external, hot-plug power. Each 1U power enclosure houses up to six hot-plug power supplies to power up to one server blade enclosure, fully populated with BL p-Class server blades and interconnects.
Please use the sizing utility to determine the power needed for each configuration
http://www.hp.com/go/bladesystem/powercalculator

Three power distribution solutions are available depending on the size of the intended deployment (see table).

Two 30-Amp redundant power feeds per power enclosure
Connectors:

1. NEMA receptacles (NA/Japan)
   • NA 1-phase L6-30, 250v, 30A 3-wire
   • NA 3-phase L15-30, 250V, 30A, 4-wire
2. IEC 309 Pin & Sleeve connectors (International)
   • Intl 1-phase 250V, 32A, 3- pin (2 pole + ground)
   • Intl 3-phase 380-415V, 32A, 5--pin (4 pole + ground)
   • Optimized for power cabling from rack bottom and network cabling from rack top

Optional software offerings that selectively extend the functionality of an Adaptive Infrastructure to address specific business problems and needs:

• Workload Management Pack - provides easier management of complex environments, improving overall server utilization and enabling customers for the first time to confidently deploy multiple applications on a single multiprocessor ProLiant Server.
• Performance Management Pack - identifies and explains hardware performance bottlenecks on ProLiant servers and attached options enabling users to better utilize their valuable resources.
• Intelligent Networking Pack - detects and analyzes network bottlenecks or broken network linkages and steers traffic to the optimum route based on network conditions.
• Vulnerability and Patch Management Pack - identifies and remediates software security vulnerabilities due to missing patches as well operating system configurations that can be exploited by viruses, worms, and other blended threats.
• Virtual Machine Management Pack - provides central management and control of virtual machines from Microsoft and VMware. Integrated approach provides the ability to manage both physical and virtual resources from a single management console. Integrated approach provides the ability to manage both physical and virtual resources from a single management console.

NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information.

Microsoft® Windows®
LINUX
VMware Virtualization Software

NOTE: For a more complete and up-to-date listing of supported operating systems and versions, please visit our OS Support Matrices website: http://www.hp.com/go/ossupport
NOTE: For an up-to-date listing of the latest drivers available for the ProLiant BL p-Class, please visit the support website: http://www.hp.com/products/servers/proliant-bl/p-class/info/
NOTE: For more information on HP's Certified and Supported ProLiant Servers, please visit the VMware Server Support Matrix at: http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA3000 & EVA5000, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to http://www.hp.com/go/factory-express.

Integrated Lights-Out (iLO) Advanced Pack

• HP BladeSystem wizard - new feature iLO, blade and OS installation and configuration
• Static IP bay configuration -- new feature for ProLiant BL p-Class blades
• Virtual Text and Graphical Remote Console
• Virtual CD-ROM and Virtual Floppy
• Virtual Power Button Control
• Dedicated LAN Connectivity
• Automatic IP Configuration via DHCP/DNS/WINS
• Industry Standard 128-bit Secure Sockets Layer (SSL) Security
• IML and iLO Event Logging
• Support for 12 user accounts with customizable access privileges

NOTE: For more information on iLO Advanced visit the website: http://www.hp.com/servers/ilo/

• Power redundancy:
  • hot-plug power supplies
  • redundant AC feeds (requires two power enclosures when using blade enclosures with enhanced backplane components)
  • interconnects options and server blade management module share power from both A- and B- side power buses
• Dual-Port Fibre Channel Mezzanine Card for redundant SAN connections
• Redundant ROM on each server blade
• ECC Memory
• Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load balancing)

Interconnect Switch availability features:

• Hot-plug and hot- remove with configuration retention and no need to cable/re-cable
• Two network connections per HP ProLiant BL30p server blade routed to independent interconnect switches
• Redundant Ethernet inter-switch communication with two sets of redundant Ethernet uplink ports per each interconnect switch
• Redundant front panel ports per each interconnect switch for diagnostics, management, and additional uplinks
• Redundant serial ports
• Compatibility with PVST+ (CGESM or GbE2 switch) and 802.1D Spanning tree protocol support for loop-free path redundancy
• Static IEEE 802.3ad (EtherChannel compatible) trunking with automatic port load balancing and failover
• Redundant configuration files and operating system firmware images in memory (GbE2 switch)
• Redundant fans per each interconnect switch
• Redundant power to each interconnect switch
• Support for ProLiant network adapter teaming
• Redundant configurable community strings and SNMP trap manager hosts
• Redundant configurable syslog server, DNS server, and default gateways (GbE2 switch)

• Compatible with 19-inch Standard EIA rail sets
• EIA rail-to-rail depth is 29 - 30"
• Cabinet depth must be at least 36-inch deep overall (Additional min. 3.5-inch clearance from rear RETMA rail to rear door, inclusive in the 36-inch overall depth)
• Ample room for top and bottom cable egress (approximately 8 square inches for full rack configuration with patch panel)
• Must be capable of supporting 1600 lb (for full rack configuration)
• Perforated front and rear doors to accommodate front-to-back cooling
• Must have 65% open perforation on server blade enclosure doors to support airflow requirements
• Optimized for use with the HP 10000 Series racks

• HP 10000 series racks provide enhanced airflow for maximum cooling, allowing racks to be fully loaded with servers and server blades using the latest server technologies.

Three-year limited warranty, including hardware diagnostic support, pre-failure warranty (coverage of processors, memory and SCSI hard drives). The warranty is fully supported by HP Services and a worldwide network of resellers and service providers. In addition 90-day's getting started software telephone support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services.

NOTE: Server Blade Limited Warranty includes 3 year Parts, 1 year Labor, 1-year on-site support.
NOTE: Server Blade Enclosure and Interconnects Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.

Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business requirements, from basic to mission-critical.

A full range of HP Care Pack hardware and software services are available including:

• Installation and start up
  
• Education courses
  
• Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7 days call window with options including 4-hour response or 6-hour Call To Repair
  
• Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and VMWare-based IT solutions helping to deliver high level of application availability. Response times range from 30 mins for critical problems to 2 hours.
  
• System Management, Performance Services and Mission Critical Support Solution

HP has introduced a new building block approach which allows customers to purchase the right coverage at the right time whether purchasing an initial server blade plus enclosure or purchasing additional ProLiant server blades over time. HP will offer two sets of Care Pack services, one designed to support the server blade and one designed to support the enclosure.

HP Care Pack services for HP ProLiant Server Blades cover the server blade and all HP branded hardware options qualified for the server, purchased at the same time or afterwards, internal to the server.

HP Care Pack services for HP BladeSystem p-Class Server Blade Enclosure covers the enclosure including patch panels, HP supported Ethernet interconnects, power enclosure with power supplies and power distribution.

NOTE: For more information regarding the Blade service portfolio visit our worldwide web site on the internet at: http://h20219.www2.hp.com/services/cache/81725-0-0-225-121.html

For 2GB Total Memory choose two: