HP Modular Cooling System

• Automatic door opening system that will swing open the MCS front and rear doors in case of an unexpected change in temperature beyond the established parameters.
• 35kW of cooling capacity, up from 30kW.
• CTO capability of up to 2000 Lbs dynamic load. The MCS now ships standard with heavy duty Shock Pallet to support shipping the MCS integrated with IT equipment. Customers may now use the services of Factory Express or other integration services.

• Automatic door opening system that will swing open the MCS front and rear doors in case of an unexpected change in temperature beyond the established parameters.
• 35kW of cooling capacity, up from 30kW.
• CTO capability of up to 2000 Lbs dynamic load. The MCS now ships standard with heavy duty Shock Pallet to support shipping the MCS integrated with IT equipment. Customers may now use the services of Factory Express or other integration services.

HP Modular Cooling System or MCS is designed for high density server and blade deployments. It re-circulates and cools the hot server exhaust air through heat exchangers residing in the MCS unit. The air is then expelled in front of the enclosed rack at a much lower temperature providing sufficient cool air for a load of 35kW of servers or blades.
The MCS unit contains three fans and three heat exchangers deployed along the full height of the rack to ensure that all the equipment installed receives sufficient cooled air. All fans and heat exchangers are swappable while the unit is online, providing great servicing flexibility. Redundant power is ensured through a failover power switch that can be connected to two power sources. The environmental monitor controls the air temperature to the servers and adjusts automatically to meet the pre-established air temperature goal. The environmental monitor interacts with HP SIM (Systems Insight Manager) via SNMP traps.
The Water Hookup kit is made available as a separate kit to prepare the water hookup ahead of the arrival of the MCS.
A Site Preparation Guide is available for download at http://www.hp.com/go/MCS. This guide provides details on how to prepare the datacenter for the successful deployment of the MCS. It may be advisable to contact HP Professional Services for a Site Datacenter Thermal Quick Assessment Service, reference HB691A1 and HB691AE. Visit http://www.hp.com/hps/support for additional information.
The MCS unit mounted next to a HP 10000 G2 Series rack is designed to occupy 1.5 tiles in the datacenter maintaining tile count for cable routing and access to the plenum.

The MCS is now CTO capable with a dynamic load capacity of 2000 Lbs. For HP CTO services go to http://h20219.www2.hp.com/services/cache/119416-0-0-225-121.html?jumpid=reg_R1002_USEN]

NOTE: A loaded MCS unit should only be moved by professional movers.

All HP rack-mountable products are designed to fit our industry-standard 19-inch wide racks. Racks and rack-mountable components are typically described using "U" measurements. One "U" is 1.75" (44.45 mm) high.

The MCS ships attached to a specially adapted 42U 10000 Series G2 rack 600mm wide (10642). This sturdy, industrial-strength rack series offers the following features:

• Universal - Accommodates all HP equipment (ProLiant, Integrity, Integrity NonStop, HP 9000, Alpha, StorageWorks,) in addition to select third party equipment.
  
• Design - The doors on the HP 10000 G2 Series rack bayed to the MCS unit will be fitted with Plexiglas mounted inside the front door and solid split rear doors to prevent air from escaping to the environment.
  
• Load Capacity - The 10642 G2 will accommodate up to 2000 lb. of equipment in a static or dynamic environment. A static environment is one where the rack is positioned into place and the leveling feet are extended prior to equipment being installed. A dynamic environment is one where the rack is shipped on a shock pallet with equipment installed or rolling racks with equipment installed to new locations within the data center.
  
• Unique Frame and Rail Design - Enables fast assembly, easy mounting and outstanding structural integrity. Equipment installation effort is dramatically reduced because the vertical mounting system was specifically designed to minimize the time required to install HP products, and can be used with many other non-HP products as well. U markings on the front and sides of rails make it easy to align parts when installing equipment. Cut outs in the rails also allow for cabling between racks.
  
• Security Provisions - Front and rear doors are lockable, which provides the necessary level of security to prevent unauthorized entry. Side panels are also lockable* allowing for your entire rack row to be secure

• Cooling Capacity of up to 35kW - MCS has been designed to support a full load of blade servers, which, at their maximum configuration require a power load of 35kW. The MCS unit will provide over 2700 CFM of cool air distributed along the full height of the rack.
  
• Power Input Redundancy - Automatically detects power failure and switches to alternate source.
  
• Environmental Control and Safety - The MCS features full environmental control of the cooled air temperature being placed in front of the servers. The heat exchanger unit features safety quick disconnect valves that prevent accidental chilled water leakage during service. A water leak detector ships standard with the MCS. Alarms can be sent via SNMP traps to Systems Insight Manager (SIM).
  
• Hot-swappable components - Fans and heat exchangers can be replaced while the unit is operating allowing for great flexibility in servicing the MCS.

All rack products are 19 inch RETMA standard and will support select third-party equipment. For additional rack information, please refer to the HP 10000 G2 Series rack QuickSpecs at: http://h18004.www1.hp.com/products/servers/proliantstorage/racks/10000series.html

The following brick level options/components do not have individual HP Care Pack Services. These items will be included in product HP Care Pack Services into which they are installed.

HP Modular Cooling System: One year warranty, parts only (1-0-0)
HP 10642 G2 Series Rack: Three year warranty, parts only (3-0-0)
NOTE: Certain restrictions and exclusions apply. Consult the HP Customer Support Center for details.

Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business requirements, from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available including:

• Installation and start up
• Education courses
• Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7 days call window with options including 4-hour response or 6-hour Call To Repair
• Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and VMware-base d IT solutions helping to deliver high level of application availability. Response times range from 30 mins for critical problems to 2 hours.
• System Management, Performance Services and Mission Critical Support Solution

NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us at: http://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
NOTE: For additional information on Server Services, Rack and Power Options, please visit: http://h20219.www2.hp.com/services/cache/111072-0-0-225-121.html
NOTE: The information contained herein is subject to change without notice and is provided "as is" without warranty of any kind.
NOTE: The warranties for HP products and services are set forth in the express limited warranty statements accompanying such products and services.
NOTE: Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.

The information contained herein is subject to change without notice.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.