Overview

HP NC340T PCI-X 4-port 1000T Gigabit Server Adapter

The HP NC340T PCI-X 4-port 1000T Gigabit Server Adapter features four 10/100/1000T Gigabit Ethernet ports on a single card, saving valuable server I/O slots for other purposes. The four gigabit ports make the NC340T provides the greatest bandwidth in an NC-series Ethernet adapter, ideal for virtualization, server consolidation, network segmentation, and other ProLiant server applications requiring maximum throughput and port density. Each port uses a PCI-X 64-bit/133MHz interface behind a PCI-X bridge. For best performance, install the adapter in a 64-bit/133Mhz slot. The 10/100/1000 Mb/s capability enables the NC340T to be used in Ethernet or Fast Ethernet legacy wiring plants, as well as for gigabit environments. Tested and proven to meet demanding HP standards, the NC340T provides full driver support on a wide variety of ProLiant servers. The NC340T ships with teaming drivers for all major operating systems, teaming utilities, multiple VLAN tagging capability, configuration utilities, and support for the optional HP ProLiant Essentials Intelligent Network Pack that proactively adapts to changes in the network infrastructure.

Models
HP NC340T PCI-X 4-port 1000T Gigabit Server Adapter	391661-B21

NC340T Kit contents	HP NC340T PCI-X 4-port 1000T Gigabit Server Adapter
	CD containing drivers, user guide, installation and diagnostic utilities
	Quick install card
	Product warranty statement

NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA0-6064ENW.pdf.

Standard Features

Server Support

ProLiant DL (rack-optimized):

HP ProLiant DL140 G2
HP ProLiant DL140 G3
HP ProLiant DL145 G2
HP ProLiant DL320 G4
HP ProLiant DL320 G5
HP ProLiant DL360 G4
HP ProLiant DL360 G4p
HP ProLiant DL360 G5
HP ProLiant DL365
HP ProLiant DL380 G4
HP ProLiant DL380 G5
HP ProLiant DL385
HP ProLiant DL385 Packaged Cluster with MSA500 G2
HP ProLiant DL385 G2
HP ProLiant DL580 G3
HP ProLiant DL580 G4
HP ProLiant DL585
HP ProLiant DL585 G2

ProLiant ML (expansion-optimized):

HP ProLiant ML150 G2
HP ProLiant ML150 G3
HP ProLiant ML310 G3
HP ProLiant ML310 G4
HP ProLiant ML350 G4
HP ProLiant ML350 G4p
HP ProLiant ML350 G5
HP ProLiant ML370 G4
HP ProLiant ML370 G5
HP ProLiant ML570 G3
HP ProLiant ML570 G4

NOTE: This is a list of supported servers. Some may be discontinued.

Performance

Quad-port Gigabit Ethernet Throughput

Up to 1000Mbps Ethernet transfer rate deliver outstanding network performance that improves response time and removes bottlenecks across the entire network. Four ports on a single adapter is ideal for high density, I/O slot constrained servers, virtualization applications, and increased network segmentation. In addition to Gigabit Ethernet, the NC340T network adapter (NIC) supports both 10Mbps and 100Mbps providing compatibility with Ethernet and Fast Ethernet twisted pair networks.

Jumbo Frames	Jumbo frames (also known as extended frames) permit a 9K byte transmission unit (MTU), which is six times the size of standard 1500 byte Ethernet frame. The NC340T supports jumbo frames as a way to achieve higher throughput and better CPU utilization. Jumbo frames are particularly useful for database transfers and tape backups.

802.1Q VLANs with 802.1p QoS Tagging

IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of the NC340T to be separated into multiple virtual NICs for added network segmentation and enhanced security and performance. VLANs increase security by isolating traffic between users. Limiting the broadcast traffic to within the same VLAN domain also improves performance. IEEE quality of service (QoS) 802.1p tagging allows the adapter to mark or tag frames with a priority level across a QoS-aware network for improved traffic flow.

Interrupt Coalescence	Interrupt coalescing (interrupt moderation) groups multiple packets, thereby reducing the number of interrupts sent to the host. This process optimizes host efficiency, leaving the CPU available for other duties.

Dual Address Cycles	Dual address cycles (DAC) provide the ability to address memory above 4 GB and improve system performance by preventing the server operating system from performing a buffer copy from below 4 GB to above 4 GB.

High Availability

Network Adapter Teaming

ProLiant Network Adapter Teaming provides fault tolerance and load balancing across a team of two or more network adapters. The team of adapters works together as a single virtual adapter. Support for several different types of teaming is included. Optional advanced teaming capabilities are further supported through the ProLiant Essentials Intelligent Networking Pack.

The teaming options offer IT professionals an easy, efficient, and cost-effective way to provide network fault tolerance and increased network bandwidth. For more information, see the ProLiant Network Adapter Teaming home page.

PCI Hot Plug	PCI Hot Plug support enables the NC340T to be replaced or added to a PCI Hot Plug compatible server without powering down the system.

Network Management
Auto-negotiation	The NC340T automatically senses the speed of the device to which it is attached. It also automatically configures for half or full duplex, depending on the duplex mode of the switch, hub, or router connected to the adapter.

Management Support	Like all HP server adapters, the NC340T ships with drivers and agents that can be managed from HP Systems Insight Manager, as well as using any other management application that supports SNMP. HP Systems Insight Manager can recognize the NC340T individually or in teams, and can collect and report SNMP statistics on the adapter events.

Server Integration

The NC340T is a completely integrated, tested, and qualified solution that is optimized for HP servers. HP validates a wide variety of major operating systems drivers with the full suite of web-based enterprise management utilities and ProLiant Essentials (including SmartStart and HP Systems Insight Manager) that simplify network management. Integrated Management Log (IML) support is provided by the NC340T for critical event logging on HP servers.

This approach provides a more robust and reliable networking solution than offerings from other venders and provides users with a single point of contact for both their servers and their network adapters.

Configuration Utilities	Each NC340T ships with a suite of operating system-tailored configuration utilities that allow the user to enable initial diagnostics and configure adapter teaming. This includes a patented teaming GUI for Microsoft Windows operating systems. Additionally, support for scripted installations of teams in a Microsoft Windows environment allow for unattended OS installations.

LED Indicators	Bracket LED indicators show link integrity, network activity, and network speed for easy troubleshooting.

WOL	The NC340T provides Wake-on-LAN (WOL) support allowing an administrator to remotely power on a WOL-capable server. When the server powers down, the NC340T maintains power through an alternate source and continuously monitors the network for a special wake-up packet. When the adapter receives the special packet created for its MAC address, the NC340T instructs the server to power on.

PXE

Support for pre-boot execution environment (PXE) enables automatic deployment of computing resources remotely from anywhere. It allows a new or existing server to boot over the network and download software, including the operating system, from a management/ deployment server at another location on the network. Additionally, PXE enables decentralized software distribution and remote troubleshooting and repairs.

Service and Support, HP Care Pack, and Warranty Information

Warranty	Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

Support Services

Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business requirements, from basic to mission-critical.

A full range of HP Care Pack hardware and software services are available including:

Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13 ours, 5 day to 24 hours, 7 days call window with options including 4-hour response or 6-hour Call-To-Repair.
Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials, and VMware-based IT solutions helping to deliver high level of application availability. Response times ranging from 30 minutes for critical problems to 2 hours.
System Management, Performance Services and Mission Critical Support Solution

NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us at: http://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

Related Options

Additional Gigabit Server Adapters	HP NC110T PCI Express Gigabit Server Adapter NOTE: Does not support Windows 2000.	434905-B21
	HP NC360T PCI Express Dual Port Gigabit Server Adapter	412648-B21
	HP NC364T PCI Express Quad Port Gigabit Server Adapter NOTE: Does not support Windows 2000.	435508-B21
	HP NC373F PCI Express Multifunction Gigabit Server Adapter	394793-B21
	HP NC373T PCI Express Multifunction Gigabit Server Adapter	394791-B21
	HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter	394795-B21
	HP NC1020 PCI 1000T Gigabit Server Adapter	353377-B21
	HP NC7170 PCI-X Dual Port 1000T Gigabit Server Adapter	313881-B21
	HP NC7170 PCI-X Low Profile Dual Port 1000T Gigabit Server Adapter	383738-B21
	HP NC7771 PCI-X 1000T Gigabit Server Adapter	290563-B21
Combo Switch Adapters	HP NC150T PCI 4-port Gigabit 1000T Combo Switch Adapter	367132-B21
10 Gigabit Server Adapter	HP NC510C PCIe 10 Gigabit Server Adapter NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510C adapter.	414129-B21
10 Gigabit Server Adapter	HP NC510F PCIe 10 Gigabit Server Adapter NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510F adapter.	414126-B21

Technical Specifications

Compliance	IEEE 802.3ab, 802.3u, 802.3x, Dynamic 802.3ad, 802.3p, 802.1Q PCI 2.3 PCI-X 1.0a ACPI 1.1a RoHS Compliance
General Specifications	Communications Processor	Two Intel 82546GB with a Pericom PCI-X bridge
	Data rate	10/100/1000 Mbps, Half- and full-duplex
	On-board memory	256 KB
	Bus type	PCI-X/PCI
	Bus width	32- or 64-bit
	Bus speed (MHz)	33/66/100/133
	Interrupt levels	Automatically configured
	Connector	Four RJ-45
	Distance	Up to 328 ft (100 m)
	Wiring	Category 5 (CAT-5) or better twisted-pair cabling
	Dimensions (L x W)	Full height bracket, 6.39 x 4.2 in (16.23 x 10.66 cm) without bracket
Power and Environmental Specifications	Operating	Temperature	32° to 131° F (0° to 55° C)
		Humidity	10% to 90% non-condensing
	Non-operating	Temperature	-40° to 185° F (-40° to 85° C)
		Humidity	5% to 95% non-condensing
	Power requirement	1850 mA @ 5 V maximum
	Emissions Classifications	Class B
	Agency Approvals	USA	FCC (CFR 47 part 15) and UL 60950
		Canada	ICES-003 and CSA60950
		Japan	VCCI
		Korea	MIC (RRL), EMC Registration
		Australia	ACA, AS/NZS3548/EN55022:1998, EN55024:1998
		European Union	EN55022:1998 (CISPR 22), EN55024:1998, and IEC60950:1999 (EN60950:2000)
	Safety	UL Mark (USA and Canada)
		CE Mark
		EN 60590
Operating System Support	32-bit Windows Microsoft Windows Server 2003 Standard, Web, Small Business, and Enterprise Editions Microsoft Windows 2000 Server, Advanced Server, and Datacenter Server 64-bit Windows Microsoft Windows Server 2003 Standard and Enterprise Editions Microsoft certified miniport and teaming drivers Red Hat Enterprise Linux SUSE Linux Enterprise Server Novell NetWare 6.5 Novell Open Enterprise Server x86 SCO UnixWare 7.1.3 SCO UnixWare 7.1.4 SCO OpenServer 5.0.7 SCO OpenServer 6.0.0 NDIS 2 for DOS unattended operating system install (43K or less in size) NOTE: For more Linux OS support & certification information, please visit our the ProLiant & Bladesystem Server Linux matrix: http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert.html

Environment-friendly Products and Approach	End-of-life Management and Recycling	Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.

The information contained herein is subject to change without notice.

Windows is a US registered trademark of Microsoft Corporation.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

DA-12419 11 - Version 11 - September 5, 2007