  |
Overview
|
|
Overview
|
HP GbE2c Ethernet Blade Switch for c-Class BladeSystem |
| Designed for the new c-Class BladeSystem enclosure, the HP GbE2c Ethernet Blade Switch for c-Class BladeSystem (GbE2c) provides a full set of industry standard Gigabit Ethernet Layer 2 features, sixteen internal downlinks, five uplinks and two internal cross-connects in a single low cost blade solution. The GbE2c dramatically reduces cabling, power and cooling requirements compared to stand-alone switches, allowing you to realize the full cost saving capabilities of the HP c-Class BladeSystem. |
 | |||
| Figure 1 GbE2c Front
Bezel | |||
| 1. |
Reset Button | 4. | DB-9 Serial Management Port |
| 2. |
Health LED | 5. | RJ-45 1Gb Uplink Ports |
| 3. |
UID LED | ||
| | |||
|
What's New |
|
|
|
|
At A Glance |
|
Performance:
Management:
Security:
|
|
|
Models and Options
| Models | |
| HP GbE2c Ethernet Blade Switch for c-Class BladeSystem | 410917-B21 |
| | |
|
Compatibility |
|
| HP ProLiant Servers | HP ProLiant BL460c |
| HP ProLiant BL465c | |
| HP ProLiant BL480c | |
| HP ProLiant BL680c G5 | |
| HP ProLiant BL685c | |
| HP ProLiant BL860c | |
| ProLiant BL c-Class Server Blade Enclosures |
HP BladeSystem c3000 Enclosure HP BladeSystem c7000 Enclosure |
|
|
|
| Required
Network Cabling | 10Base-T | Categories 3, 4 or 5 UTP (100
meters) EIA/TIA-568 100-ohm STP (100 meters) |
| 100Base-TX | Category
5 UTP (100 meters) EIA/TIA-568 100-ohm STP (100 meters) | |
| 1000Base-T | Category
5 UTP (100 meters) EIA/TIA-568 100-ohm STP (100 meters) | |
|
| ||
| Service and Support |
This product is covered by a global limited warranty and supported by
HP Services and a worldwide network of HP Authorized Channel Partners.
Hardware diagnostic support and repair is available for three years from
date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Additional support may be covered under
the warranty or available for an additional fee. Enhancements to warranty
services are available through HP Care Pack services or customized service
agreements. Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business requirements, from basic to mission-critical. A full range of HP Care Pack hardware and software services are available
including:
HP Care Pack services for the c7000 and c3000 Enclosure cover the enclosure,
power supplies and fans. HP qualified rack options are covered by these
services when installed within the same rack. HP supported c-Class enclosure
devices including pass thru, Ethernet interconnect and virtual connect
modules are also covered by the c7000 and c3000 enclosure Care Pack services. NOTE: For more information on HP Care
Pack services, contact any of our worldwide sales offices or resellers
or visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack |
|
|
Related Options
| Service and Support Offerings | NOTE: The HP
Care Pack service part numbers below for ProLiant BL c-Class server blades,
cover the server blade and all HP branded hardware options qualified for
the server, purchased at the same time or afterwards, internal to the server. |
|
| Hardware Services On-site
Service |
||
| 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic | ||
| 4-Hour On-site Service, 7-Day
x 24-Hour Coverage, 3 Years, Electronic |
||
| 6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic |
||
| Support Plus 24 |
||
| Onsite HW support 24x7, 4hr
response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion,
24x7 2hr response time incl. HP holidays, Electronic |
||
| NOTE: HP Care Pack services for the c7000 and c3000 Enclosure cover the enclosure, power supplies and fans. HP qualified rack options are covered by these services when installed within the same rack. HP supported c-Class enclosure devices including pass thru, Ethernet interconnect and virtual connect modules are also covered by the c7000 and c3000 enclosure Care Pack services. | ||
| NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not covered under the c7000 and c3000 enclosure Care Packs, SAN/Fabric switches carry separate Care Packs. SAN/Fabric Switch Care Pack service level support should always be uplifted to match existing storage or server service level. | ||
| Hardware Support Services On-site Service | ||
| 4-Hour On-site Service, 5-Day
x 13-Hour Coverage, 3 Years, Electronic NOTE: Uplifts the Ethernet devices to the same level of warranty as the c-class enclosure |
UE477E
|
|
| 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic |
UE478E
|
|
| 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic |
UE479E
|
|
| 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic |
UE480E
|
|
| Installation & Start-up Services | ||
| Hp BladeSystem c-Class Infrastructure Installation and Startup Service, Electronic |
UE602E
|
|
| HP BladeSystem Enhanced Network Installation and Startup Service, Electronic |
UE603E
|
|
| ProLiant BL c-Class Blade Server Hardware Installation, Electronic |
UE493E
|
|
| ProLiant BL c-Class Enclosure and Server Blade Hardware Installation, Electronic |
UE494E
|
|
| NOTE: For more information, customer/resellers can contact http://www.hp.com/services/bladesystemservices |
|
|
Technical Specifications
| Shipping Dimensions | Length | 290 mm (11.42 in.) | |||
| Width | 368 mm (14.49 in.) | ||||
| Height | 60 mm (2.36 in.) | ||||
| Shipping Weight | 2.0 Kg (4.41 lbs) | ||||
| Product Specifications Hardware | Performance | 10 Gbps external port bandwidth per BladeSystem enclosure (20 Gbps full duplex) | |||
| Forwarding rate 1.5 million pps per Gigabit port, (64-byte packets) | |||||
| Non-blocking, full-wire speed for all connections Auto-MDI/MDIX, auto-negotiation and auto-sensing with full-duplex support. | |||||
| Forwarding Mode | Store and forward | ||||
| MAC Addresses | Supports 8K MAC addresses per GbE2c switch in a BladeSystem Enclosure | ||||
| Forwarding Table Age Time (Maximum age) | 1 to 1,000,000 seconds (default: 300 seconds) |
||||
| Memory | 128 MB Main, 16MB flash and 1MB packet buffer per interconnect switch | ||||
| Connectors and Cabling | Connector: | 5 RJ-45, 1 DB-9 | |||
| Cable Support | FCC Class A | ||||
| ICES-003 Class A | |||||
| AS/NZS 3548 Class A | |||||
| VCCI Class A | |||||
| Network Transfer Rate | 10 Base-T (half-duplex) | 10 Mbps | |||
| 10 Base-T (full-duplex) | 20 Mbps | ||||
| 100 Base-TX (half-duplex) | 100 Mbps | ||||
| 100 Base-TX (full-duplex) | 200 Mbps | ||||
| 1000 Base-TX (half and full-duplex) | 2000 Mbps | ||||
| Indicators | For the 5 front panel Ethernet ports, there are 2 LEDs per port. | ||||
Speed LED | Link/Activity
LED | ||||
Off | 10 Mbps | Solid Green | Link | ||
Green | 100
Mbps | Blinking | Activity | ||
Amber | 1
Gbps | ||||
| Dimensions | Length | 10.5 in (267.7 mm) | |||
| Width | 7.5 in (192.79 mm) | ||||
| Height | 1.1 in (27.94mm) | ||||
| Weight | 1.8 Kg (3.97 lbs.) | ||||
| Environmental Ranges | Temperature Range | |||
| Operating | 50° to 95° F (10° to 35° C) | |||
| Non-operating | -40° to 158° F (-40° to 70° C) | |||
| Relative Humidity (non-condensing) |
Operating 5% to 95% | |||
| Power Specification | Power Requirements | 12VDC: 2.0A, 25 W maximum (per interconnect switch) | ||
|
|
||||
| Product Specifications Software | Security Features | SSHV2, TACACS and TACACS+ | ||
| VLANs can be configured to provide segregation for data - improving bandwidth, performance and limiting traffic to its designated domains. GbE2c also provides secured access through SSH v2, protecting against IP spoofing as well as DNS spoofing. GbE2c enables users to meet their security requirements by providing support of HTTPS, RADIUS and TACACS. | ||||
| Spanning Tree Features | 802.1d, 802.1w, 802.1 s | |||
| GbE2c's industry standard Spanning
Tree provides redundancy and the loop avoidance capabilities to keep the
network not only up, but operating at peak performance Based on the industry standard 802.1w, GbE2c Rapid Spanning Tree Protocol (RSTP) offers fast convergence - reducing packet loss and downtime in high-availability and high resilient networks. GbE2c's industry-standard based RSTP offers instant failover to secondary links in an unlikely event of primary link failure. GbE2c also offers Multiple Spanning Tree Protocol (MSTP; 802.1s) for seamless integration into networks running 802.1s. Multiple Spanning Tree enables networks to utilize individual uplinks for separate VLANs thus improving the overall performance of the network. Up to 32 STG are supported |
||||
| Trunking Features | 802.3 ad | |||
| GbE2c reduces downtime in an unlikely event of link failure by supporting link aggregation protocol. GbE2c link aggregation is compatible with Cisco Etherchannel® thus providing seamless integration into Cisco® based networks. | ||||
| VLAN Features | In GbE2c up to 256 VLANs (802.1Q) can be configured to provide segregation for data - improving bandwidth, performance and limiting traffic to its designated domains. | |||
| Management Features | GbE2c provides multiple easy-to-use
configuration and management options. For compatibility, the GbE2c offers
the same CLI as the GbE2. The GbE2c will also be software upgradeable to
use an industry standard network administrator CLI (comparable to Cisco®)
in a future release. GbE2c's Web-based management interface enables administrators to easily configure the most advanced features such as Rapid Spanning Tree, Uplink Failure Detection and SNMP management by pointing and clicking. GbE2c also enables sophisticated administrators to configure and manage the switch through SNMP. GbE2c provides full support for SNMP v1v2 and v3. |
|||
|
|
||||
| Standards Support |
|
|||
|
|
||||
| Safety and Compliance Safety Certifications |
TUV to UL 60950-1, and CAN/CSA C22.2 No. 60950-1 and to EN 60950-1 | |||
| CE Marking | ||||
| RoHS 5/6 compliant | ||||
|
|
||||
| Electromagnetic Emissions Certifications FCC Part 15 Class A | FCC Part 15 Class A | |||
| EN 55022: 1998 (CISPR22) | ||||
| EN 55024: 1998 (CISPR24) | ||||
| VCCI Class A | ||||
| AS/NZS 3548 Class A CE | ||||
| CNS 13438 Class A MIC | ||||
| MIC | ||||
|
|
||||
| Environment-friendly Products and Approach | End-of-life Management and Recycling |
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment. |
|
|
|
|||
|
© Copyright 2007 Hewlett-Packard Development Company, L.P. |