• Support for HP NC522m Dual Port 10GbE Multifunction BL-c Adapter

This document covers the HP ProLiant BL460c server blade only. For more information on HP BladeSystems c-Class Infrastructure and HP BladeSystem c-Class Interconnect Components, please see the following QuickSpecs:

HP BladeSystem c-Class Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html

HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html

HP BladeSystem c-Class Interconnect Components QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html

The HP ProLiant BL460c provides greater 2P x86 server blade density without compromise and maximum power-efficiency with flexibility and choice.

HP ProLiant BL460c server blade includes:

• Processor:
  • Up to two Intel® Xeon® 5400 Series processors
  • Up to two Intel® Xeon® 5200 Series processors
  • Supports up to 2 Dual-Core 3.50 GHz, 1333 MHz FSB -1X6 MB Level 2 cache memory, and up to 2 Quad-3.33 GHz 1333MHz-2x6 MB Level 2 cache memory
  • Intel 5000P chipset supporting up to a 1333 MHz Front Side Bus
    
• Memory:
  • Up to 64 GB of memory, supported by (8) slots of PC2-5300 Fully Buffered DIMMs at 667 MHz
    • NOTE: 64 GB of memory is supported with 80W processors and below. 64 GB of memory is not supported with 120W processors.
    • NOTE: Up to three 16 GB (2 x 8 GB) memory option kits or 48 GB of memory is supported with 120W processors
  • Supporting low-power memory
  • Advanced ECC memory support
  • Supporting memory interleaving (2x1); memory mirroring and online spare capacity.
• Storage Controller:
  • Integrated HP Smart Array E200i RAID controller with 64 MB cache (with optional battery-backed write-cache with an upgrade to 128 MB cache in standard BTO models. Supports RAID 0,1 in standard BTO models
    • NOTE: Drive-less model available through CTO for customers not utilizing internal disk drives and attaching directly to SAN. Please note that this model does not replace any prior model offerings. The feature listed above is not included in the standard Drive-less configure to order model. However, all configure to order models offer optional support for small form factor (SFF) hot-plug drive bays, HP Smart Array E200i Controller (with optional battery-backed write cache), and Internal USB Connector. See Factory Integrated Model section for more information.
• Internal Drive Support:
  • Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives in standard BTO models
    • NOTE: Drive-less model now available through CTO for customers not utilizing internal disk drives and attaching directly to SAN. Please note that this model does not replace any prior model offerings. The feature listed above is not included in the standard Drive-less configure to order model. However, all configure to order models offer optional support for small form factor (SFF) hot-plug drive bays, HP Smart Array E200i Controller (with optional battery-backed write cache), and Internal USB Connector. See Factory Integrated Model section for more information.
• Network Controller:
  • Two (2) embedded NC373i Multifunction Gigabit Server Adapters with iSCSI boot, TCP/IP offload engine, and optional accelerated iSCSI
  • One (1) additional embedded 10/100 network adapter dedicated to iLO 2 management
    NOTE: The Gigabit Ethernet adapters transmit from the server at 2000 Mbps only, full duplex per port. For more information, see the "Network Controller" item in Standards Features section.
• Mezzanine Support:
  • Two (2) additional I/O expansion slots via mezzanine card.
  • Supports up to two (2) mezzanine cards
    • Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (Choice of Emulex or QLogic).
    • Wide variety of 10GbE and 1GbE network adapter options for additional network ports
    • QLogic QMH4062 Gigabit Ethernet iSCSI initiator
    • 4X DDR InfiniBand (IB) Mezzanine (20 Gb/s) options for low latency server interconnectivity (based on Mellanox technology
• Internal USB Support:
  • One (1) internal USB 2.0 connector for security key devices and USB drive keys in standard BTO models
    • NOTE: Drive-less model now available through CTO for customers not utilizing internal disk drives and attaching directly to SAN. Please note that this model does not replace any prior model offerings. The feature listed above is not included in the standard Drive-less configure to order model. However, all configure to order models offer optional support for small form factor (SFF) hot-plug drive bays, HP Smart Array E200i Controller (with optional battery-backed write cache), and Internal USB Connector. See Factory Integrated Model section for more information.
• Form Factor:
  • HP ProLiant BL460c server blade plugs vertically into the BladeSystem c7000 enclosure and horizontally into the BladeSystem c3000 enclosure.
• Management:
  • HP ProLiant Onboard Administrator (powered by the Integrated Lights-Out 2 management processor) provides virtual KVM graphical remote console, virtual media, simplified server setup, and core server control functions out of the box.
  • Unlock the full capabilities of the HP ProLiant Onboard Administrator with iLO Advanced for BladeSystem to take advantage of capabilities such as boot and failure sequence replay, on-demand video record and playback, and multi-user console for up to four users. Learn more at: www.hp.com/go/iLO
  • HP Insight Control suite delivers essential management, including proactive health management, lights out remote control, optimization of power usage, rapid server deployment, performance analysis, vulnerability scanning and patch management and virtual machine management. For more information, go to www.hp.com/go/ice
• Operating Systems:
  • Supports Windows, RHEL, SLES, OEL, Solaris, NetWare, VMware, HP Citrix Essentials for XenServer
• Enclosures:
  • HP offers three different c-Class server blade enclosures to meet your individual needs:
    • The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 16 ProLiant BL460c servers plugged vertically.
    • The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 8 HP ProLiant BL460c servers plugged horizontally.
    • The HP BladeSystem c3000 tower enclosure is designed with casters for sites without racks and holds up to 8 HP ProLiant BL460c servers plugged vertically.
  • Server blades, storage blades, interconnect modules, power supplies, fans, and redundant Onboard Administrator modules are all designed to fit into the c3000 and c7000 enclosures.
• For additional enclosure information, please see: http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
• Warranty:
  • This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Certain restrictions and exclusions apply. SATA hard drives have a one year warranty. SAS drives have a 3 year warranty.
    NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

One (1) additional 10/100 NIC dedicated to iLO 2 Management
NOTE: The Gigabit Ethernet adapters transmit from the server at 2000 Mbps, full duplex per port only. However, within a Linux environment, the speed can be reduced or "throttled" using a feature available within the Linux operating system; see the white paper at: http://h71028.www7.hp.com/ERC/downloads/4AA1-5513ENW.pdf for more information.

The embedded multifunction NC373i adapters combine standard Gigabit Ethernet networking, TCP/IP offload engine (TOE), iSCSI boot and optional accelerated iSCSI into a single adapter.

• TOE moves the processing of data in the TCP protocol stack from the server CPU to the network card, freeing CPU cycles for other activities. With TOE, network communications are improved, and server efficiency is increased. The NC373i offers TOE for Microsoft® Windows 2000 and 2003 environments.
• The iSCSI network boot (iSCSI boot) allows the BL460c to boot from a remote operating system (OS) image located on a storage area network (SAN). The BL460c uses an iSCSI firmware image (iSCSI boot option ROM) making the remote disk drive appear as a local, bootable C: drive. The BL460c is configured to connect to and boot from the iSCSI target disk on the network and download the OS image from the iSCSI target disk. The iSCSI boot option ROM is supplied by HP at no cost. The additional cost and mezzanine slot usage of an add-in iSCSI HBA card is not required. Additionally, the HP iSCSI boot solution includes scripts to significantly simplify the installation process.

Two optional Fibre Channel HBAs are supported by the HP ProLiant BL460c. Both mezzanine circuit boards connect directly to the server blade system board. These Fibre Channel HBAs are available via option kits and must be ordered separately.

Two option kits

Emulex LPe1105-HP 4Gb FC HBA for HP c-Class BladeSystem (403621-B21)

• Based on the same field-proven ASIC, firmware, and driver technology as Emulex's renowned LPe1150 HBA, the Emulex LPe1105-HP is fully driver compatible with all Emulex HBAs

QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem (403619-B21)

• Uses common drivers which means that customers can standardize on one QLogic driver whether they are using the QMH2462 or other 4Gb and 2Gb HBAs powered by QLogic

Emulex and QLogic Fibre Channel HBAs feature:

• Optimal performance utilizing PCI Express
• 4/2/1Gb/s auto negotiating speeds
• Dual-ports for redundant path connections
• Up to two FC HBAs per server blade providing redundant FC HBA support
• Optimized for HP StorageWorks and supported by third party SAN vendors
• Support for Microsoft® Windows® and Linux operating systems environments

HP ProLiant BL460c server blades are optimized for HP StorageWorks MSA, EVA and XP

HP ProLiant 460c server blades are compatible with select 3rd party SANs (please see blade storage page for more details: http://h18000.www1.hp.com/products/servers/proliant-bl/c-class/storage.html

The HP Insight Control suite delivers essential infrastructure management, including proactive health management, lights out remote control, optimization of power usage, rapid server deployment, performance analysis, vulnerability scanning and patch management and virtual machine management

HP Control Insight suite installs and licenses the following components by default using a wizard-based integrated installer:

• HP Systems Insight Manager
• HP iLO Advanced for BladeSystem or iLO Advanced software
  NOTE: iLO Advanced license will be enabled when ICE is purchased as standalone software
• HP Insight Power Manager software
• HP Insight Rapid Deployment software
• HP Insight Performance Management module
• HP Insight Vulnerability and Patch Management module
• HP Insight Virtual Machine Manager software for ProLiant

NOTE: The Insight Control Environment for BladeSystem suite is no longer being sold as standalone software. You can continue to purchase Insight Control suite for BladeSystem with the c-Class enclosure as before. For standalone software, you can purchase the Insight Control suite starting January 26, 2009. The standalone Insight Control suite license will license HP ProLiant ML, DL and BL servers.

• ICE standalone license covers iLO Advanced Pack, SIM, RDP, IPM, PMP, VPM, VMM
  
• ICE license purchased with a c-Class enclosure covers iLO Advanced for BladeSystem, SIM, RDP, IPM, PMP, VPM and VMM
  
  

Additional Insight Software and management tools included on the Insight Software media kit can be installed manually:

• HP Server Migration Pack software for ProLiant
  NOTE: HP Server Migration Pack software for ProLiant is licensed separately from the Insight Control Environment Suite. HP Insight Remote support standard.
• HP Insight Remote Support Advanced (previously Service Essentials Remote Support Pack)

NOTE: HP Insight Server Migration software for ProLiant can be installed from the SMP-Universal CD included in the Insight Control Management media kit.
NOTE: Insight Control suite can be installed from the Insight Control Management DVDs, which can be delivered with HP BladeSystem c-Class enclosures with a choice of licensing options. Licensing options include a free 30 day evaluation license for 8 servers (default option for every enclosure order), a full purchased license for 8 blade servers or a full purchased license for 16 blade servers). For additional information on HP c-Class Infrastructure please visit HP BladeSystem c-Class Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
NOTE: For additional product and licensing information about Insight Control Environment for BladeSystem, HP Systems Insight Manager and Essentials software refer to: http://www.hp.com/servers/proliantessentials.

HP Insight Control Environment for Linux (ICE-Linux) provides comprehensive discovery, imaging & deployment, monitoring, and management for Linux-based ProLiant server platforms. Built on the industry-leading HP Systems Insight Manager framework, this solution integrates open source technology with experience leveraged from HP's Linux products in HP ICLE and HP XC Clusters, while providing paths to the future with developing management technologies.

NOTE: As of February 1, 2009, HP iLO Power Management Pack for BladeSystem is being discontinued. Customer can either purchase HP Insight Control Environment suite which contains all the components of IPMP or the standalone components which include iLO Advanced, Insight Power Manager and System Insight Manager.

HP Insight Control management suites and most HP Insight Software titles include one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. From more information about this service, please visit: http://www.hp.com/services/insight.

NOTE: For additional product and licensing information about Insight Control suite, HP Systems Insight Manager and other Insight Software titles refer to: http://www.hp.com/go/insightcontrol.

HP ProLiant Onboard Administrator (powered by the Integrated Lights-Out 2 management processor) simplifies server setup, health monitoring, power and thermal control, and lights-out remote administration of ProLiant ML, DL, and BL servers. HP ProLiant Onboard Administrator functions without additional software, and can be accessed from any location via a web browser. It works hand-in-hand with the HP BladeSystem Onboard Administrator, HP Systems Insight Manager, Insight Control, and Insight Dynamics helping customers unlock the value of the ProLiant platform and deliver the highest possible quality of IT service to the business.

Capabilities of the HP ProLiant Onboard Administrator embedded in ProLiant BL servers include, but are not limited to the following:

• Rom-based Setup Utility (RBSU) and Option Rom Configuration for Arrays (ORCA)
• IML and iLO event logging
• Automatic Server Recover (ASR)
• OS independent hardware health status
• Present server power consumption
• Virtual Unit ID control
• Virtual KVM based remote console
• Virtual media (single server, browser based access only)
• Remote serial console
• Virtual power button control
• Dynamic Sector Repairing (with Smart Array controller)
• Drive Parameter Tracking (with Smart Array controller)
• Integrated remote console (ActiveX Control client)
• Single Sign-on from BladeSystem Onboard Administrator

Unlock the full capabilities of HP ProLiant Onboard Administrator with iLO Advanced for BladeSystem.

HP Systems Insight Manager

The HP Insight Dynamics - VSE suite for ProLiant is advanced infrastructure management software that allows you to analyze and optimize your adaptive infrastructure to manage physical and virtual resources in the same way. HP Insight Dynamics - VSE gives you a powerful toolkit to accelerate complex technology projects and simplify daily operations. It enables you to plan capacity and power continuously, balance across physical and virtual resources, ensure cost-effective high availability, and provision infrastructure consistently.

NOTE: For more information, please see: http://www.hp.com/go/insightdynamics

Upgrading, replacing, or virtualizing your existing server? Effortlessly transition to new virtual or physical HP ProLiant servers or BladeSystem with automated, accurate and affordable migration of OS, application and data. SMP Universal automates the manual processes required for migrating servers between physical or virtual platforms, whether migrating to VMware or Microsoft virtual machines. HP Insight Server Migration software for ProLiant allows all of the following migrations:

• Physical to ProLiant
• Physical to virtual
• Virtual to virtual
• Virtual to ProLiant

NOTE: For more information, visit: http://www.hp.com/go/migrate.

Managing the growing number of servers can be complex and expensive for your organization. IT managers need to address changing business needs with tools that meet the challenges of managing today's complex Datacenters.

HP provides management solutions that are designed to simplify a server's installation, configuration and maintenance throughout the entire server lifecyle. This provides the customer with higher levels of operational efficiency and highly reliable systems: www.hp.com/go/foundation.
The foundation pack includes:

• HP SmartStart
• HP Management
• HP ProLiant Firmware Maintenance

SmartStart version supported (minimum): SmartStart 8.0
http://www.hp.com/servers/smartstart

The Insight Management Agents should be installed on all HP servers to present system instrumentation, health and configuration information into HP Systems Insight Manager and the HP System Management Homepage. The HP System Management Homepage aggregates systems data from Insight Management Agents and other HP management tools, providing a consolidated browser-based interface for managing individual servers.

Insight Management Agents and The HP System Management Homepage are included on ProLiant Support Packs, and can also be installed using the server profiles provided with the Insight Rapid Deployment software.

For additional information about the Management Agents and the HP System Management Homepage please visit the management Web site at: http://www.hp.com/servers/manage.

HP Serviceguard for Linux is a high availability clustering solution designed to protect applications and services from a wide variety of software and hardware failures, monitoring the health of each server (node) and quickly responding to failures such as those that affect system processes, system memory, LAN media and adapters, and application processes.

The following is a quick summary of HP Serviceguard for Linux features and support. For the most recent list of Linux distributions & kernels, servers and storage supported with Serviceguard for Linux, see the Serviceguard for Linux Datasheet, available at: http://www.hp.com/go/sglx/info.

• Supported Linux Distributions:
  • Red Hat EL 4
  • Red Hat EL 5
  • SUSE SLES10
• Supported Server Platforms
• HP Integrity BladeSystem to Superdome
• HP ProLiant BladeSystem p-Class & c-Class
• HP ProLiant DL
• HP ProLiant ML
• IBM System x
• Dell PowerEdge
• Sun x64
• Fujitsu Siemens PRIMERGY
• Supported Virtual Machines
  • SG/LX in HP Integrity Virtual Machines guests
  • SG/LX in VMware ESX guests
  • SG/LX in Red Hat and SUSE Xen hosts (DOM0)
• Application Integration Toolkits
• HP Serivceguard for Linux Oracle Database Toolkit
• HP Serviceguard Extension for SAP on Linux (SGeSAP/LX)
• Free Application Integration Toolkits:
  • Apache
  • MySQL
  • NFS
  • PostgreSQL
  • Samba
  • Tomcat
  • Sendmail
• Disaster Tolerant Solutions
• HP Serviceguard for Linux Extended Distance Cluster (XDC) extends cluster distances up to 100 km, utilizes software RAID mirroring for data replication and is storage array independent
• HP StorageWorks XP/EVA Cluster Extension Software for Linux (CLX) works seamlessly with HP Serviceguard for Linux, HP StorageWorks Continuous Access, and HP Disk Arrays to automate failover and failback between sites
• Software updates are distributed by HP Services to customers with support contracts

NOTE: The above is not a complete list of all HP Serviceguard for Linux product numbers For a detailed list of supported configuration/certification options for HP Serviceguard for Linux please refer to the HP Serviceguard for Linux Configuration & Ordering Guide available at: http://www.hp.com/go/sglx/info.

Microsoft Windows Server
Microsoft Windows Server Hyper V
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Enterprise Linux (OEL)
Solaris 10 for x86/x64 based Systems
NetWare VMware
HP Citrix Essentials for XenServer

• Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection
• Two (2) embedded Gigabit Ethernet adapters for redundant LAN connections Two (2) hot-plug SAS/SATA hard drive bays and integrated RAID (HP Smart Array E200i) controller on every BTO model server blade (Battery-backed write cache is optional.)*
• Redundant ROM on each server blade
• Advanced ECC Memory – can correct a multi-bit error (up to 4 bits) that occurs within one memory chip
• Memory Mirroring
• Memory Online Spare Capacity
• Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load balancing)

ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support

• One (1) internal USB 2.0 connector for security key devices and USB drive keys on every BTO model server blade* Power-on password
• Administrator's password
• Integrated Lights-Out 2 has 12 customizable user accounts and SSL encryption
• Integrated Lights-Out 2 can be disabled via a Global Setting

* For customers who choose to configure a driveless model via CTO, internal USB connectors are not available unless 447711-B21 is selected. See Factory Integrated Models section for more information.

HP Care Pack services provide total care and support expertise with committed response designed to meet your IT and business needs.

The HP Care Pack service for HP ProLiant BL c-Class server blades, cover the server blade and all HP branded hardware options qualified for the server, purchased at the same time or afterwards, internal to the server.

To fully capitalize on your HP BladeSystem servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a HP BladeSystem server support offer to help you speedily deploy and maximize system uptime.

Recommended Service – Simplify ProLiant solution implementation, maintenance and management.

• Support Service – 4-Hour Response Coverage, 3-Year, 24 x 7, Same Business Day
• Deployment Service – Installation and Start Up for HP BladeSystem Infrastructure

Enhanced Service - Optimize service level to increase IT performance and availability

• Support Service – HP Proactive BladeSystem Service, 1-Year
• Deployment Service – Enhanced Network Installation and Start-up for HP BladeSystem Switches

Installation & Start-Up service for HP BladeSystem Infrastructure plus HP BladeSystem Enhanced Network Installation and Start-UP as per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays.

For a complete listing of service offerings and information visit:
http://www.hp.com/services/bladesystemservices
http://www.hp.com/go/proliant/carepack

HP ProLiant BL460c E5450 2G (1P)
459483-xx1

HP ProLiant BL460c E5440 2G (1P)
459484-xx1

HP ProLiant BL460c E5430 2G (1P)
459485-xx1

HP ProLiant BL460c E5420 2G (1P)
459486-B21

HP ProLiant BL460c L5420 2G (1P)
462872-B21

HP ProLiant BL460c L5410 2G (1P)
462873-B21

HP ProLiant BL460c E5405 1G (1P)
459487-xx1

(1) Intel® Xeon® Processor E5450 (3.00 GHz, 1333 FSB, 80W)
(1) Intel® Xeon® Processor E5440 (2.83 GHz, 1333 FSB, 80W)
(1) Intel® Xeon® Processor E5430 (2.66 GHz, 1333 FSB, 80W)
(1) Intel® Xeon® Processor E5420 (2.50 GHz, 1333 FSB, 80W)
(1) Intel® Xeon® Processor L5420 (2.50 GHz, 1333 FSB, 50W)
(1) Intel® Xeon® Processor L5410 (2.33 GHz, 1333 FSB, 50W)
(1) Intel® Xeon® Processor E5405 (2.00 GHz, 1333 FSB, 80W)

HP ProLiant BL460c X5260 2G, (1P)
461603-B21

HP ProLiant BL460c L5240 2G, (1P)
461604-B21

HP ProLiant BL460c E5205 1G, (1P)
461605-B21

Following are memory options available from HP:

1 GB FBD PC2-5300 (2 x 512 MB) Kit

2 GB FBD PC2-5300 (2 x 1 GB LP) Kit

2 GB FBD PC2-5300 (2 x 1 GB) Kit

397411-B21

4 GB FBD PC2-5300 (2 x 2 GB LP) Kit

4 GB FBD PC2-5300 (2 x 2 GB) Kit

397413-B21

8 GB FBD PC2-5300 (2 x 4 GB) Kit

External Storage

For power specifications including Input Requirements, BTU Rating, and Power Supply Output, please see the HP BladeSystem c-Class Enclosures QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html

To review typical system power ratings use the HP BladeSystem Power Sizer which is available via the online tool located at URL: http://www.hp.com/go/bladesystem/powercalculator

System Inlet Temperature

10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed.

System performance may be reduced if operating with a fan fault or above 30°C (86°F).

For acoustic noise specifications, please see the HP BladeSystem c-Class Enclosures QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html

• TCP/IP offload engine (TOE) for Microsoft Windows 2003
• iSCSI Boot for Linux
• Optional accelerated iSCSI
• 9K jumbo frames
• TCP/IP checksum offload (TCO)
• Large send offload (LSO)
• Interrupt coalescence
• Dual address cycles (DAC)
• Wake-on-LAN (WOL)
• Pre-boot execution environment (PXE)
• ProLiant Teaming including Network Fault Tolerance, Transmit Load Balancing, and Switch-Assisted Load Balancing
• IPv6 packet transmit and receive (excluding all offload capabilities); IPv6 aware SNMPv1 agents for Microsoft Windows

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.

© Copyright 2009 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.