Overview

HP ProLiant ML150 Generation 3 (G3)

Front View:		Rear View:
1.	48x CD-ROM (2 media bays available)	1.	Power
2.	Locking front bezel	2.	Mouse Port
3.	Six 3.5" SAS/SATA HDD bays	3.	Keyboard Port
4.	Front system fan	4.	Serial Port
5.	Main System Board	5.	Monitor Port
6.	Six PCI slots	6.	USB Port
7.	Processor and processor air duct	7.	Network Port
8.	Power Supply	8.	Dedicated LO100 LAN Management Port

What's New

The ML150 G3 now supports:

Intel® Quad-Core processors 1.60 GHz 1066,1.86 GHz 1066 FSB and 2.00 GHz 1333 FSB
Supporting up to six (6) HP 300GB 15K SAS 3.5 SP HDD

At A Glance

Processor:
- Quad-Core Intel® Xeon® processor 5300 sequence
- Dual-Core Intel® Xeon® processor 5000 and 5100 sequence
- Intel® 5000V chipset
- 667 MHz, 1066 MHz or 1333MHz Front Side Bus
Memory:
- PC2-5300 Fully Buffered DIMMs (DDR2-667)Memory
- SAS/SATA - 4 sockets, 1 GB standard, 8 GB maximum
- SATA - 4 sockets, 512 MB, 8 GB maximum
Storage Controller:
- HP Embedded SATA RAID Controller
- HP Smart Array E200/128 BBWC Controller
Internal Drive Support:
- Internal SAS storage capacity of up to 1.8TB (6 x 300GB SAS drives)
- Internal SATA storage capacity of up to 4.5TB (6 x 750GB SATA drives)
- Supports up to 6 SAS/SATA hard drives via HBA or RAID Controller
Network Controller:
- Embedded HP NC7781 Gigabit Server Adapter 10/100/1000 WOL (Wake on LAN)
Expansion Slots:

Six expansion slots: Three (3) PCI-X (64-bit/100MHz), 2 PCI-Express (x4\x8), and 1 PCI (32-bit/33MHz). One slot designated for optional HP ProLiant Lights-Out 100 Remote Management card

USB Ports:
- Seven USB 2.0 ports:- 3 rear, 2 front, 2 Internal(1 standard and 1HP 5-pin)
Redundancy:
- One 650W Power Supply
Form Factor:
- 5U Tower Models. Rack models via optional rack mounting kit
Management:
- Optional HP ProLiant Lights-Out 100 Remote Management Card
Deployment/Serviceability:
- Easy chassis entry and component access
Warranty:
- Protected by HP Services and a worldwide network of HP Authorized Channel Partners, including a one-year, limited warranty, Next Business Day 1, year on-site limited Global warranty. Certain restrictions and exclusions apply. SATA hard drives have a one year warranty.

Standard Features

NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA0-66066ENW.pdf
Processor One of the following depending on configuration	Quad-Core Intel® Xeon® processor E5335 (2.00 GHz, 1333 MHz FSB,80 W)*
	Quad-Core Intel® Xeon® processor E5320 (1.86 GHz, 1066 FSB, 80W)*
	Dual-Core Intel® Xeon® processor 5060 (3.2 GHz, 1066 FSB, 130W)*
	Dual-Core Intel® Xeon® processor 5140 (2.33 GHz, 1333 FSB,65W)*
	Dual-Core Intel® Xeon® processor 5150 (2.66 GHz, 1333 FSB, 65W)*
	* Available via Configuration To Order only. Please see Configuration Information- Factory Integrated Models section of this QuickSpecs.
	Quad-Core Intel® Xeon® processor E5310 (1.6 GHz, 1066 FSB, 80W)
	Dual-Core Intel® Xeon® processor 5050 (3.0 GHz, 667 FSB, 130W)
	Dual-Core Intel® Xeon® processor 5110 (1.6 GHz, 1066 FSB, 65W)
	Dual-Core Intel® Xeon® processor 5120 (1.86 GHz, 1066 FSB, 65W)
	Dual-Core Intel® Xeon® processor 5130 (2.0 GHz, 1333 FSB, 65W)

Cache Memory	Integrated 2x2MB level 2 cache (5000 sequence) Integrated 4MB level 2 cache (5100 sequence) Integrated 2x4MB level 2 cache (5300 sequence)

Upgradeability	Upgradeable to dual processor
	NOTE: Future upgradeable to Xeon® Series 5300 Quad-Core, or 5100 Dual-Core processors (Please contact your regional sales support to determine quad core upgradeability. Some of the earlier shipping models may not support this upgrade)

Chipset	Intel® 5000V Chipset

Memory	Type	PC2-5300 Fully Buffered DIMMs (DDR2-667)
	Standard for SATA Models	512 MB
	Standard for SAS/SATA Model	1 GB
	Maximum	8 GB

Network Controller	Embedded HP NC7781 Gigabit Server Adapter 10/100/1000 WOL (Wake on LAN)

Expansion Slots #	Technology	Bus Width	Connector Width	Bus Number*	Form Factor	Notes
1	PCI-32	32 bit	NA	Dynamic	Full Length, full height
2	PCI-X	64 bit	NA	Dynamic	Full Length, full height
3	PCI-X	64 bit	NA	Dynamic	Full Length, full height
4	PCI-X	64 bit	NA	Dynamic	Full Length, full height
5	PCIe	X4	X8	Dynamic	Full Length, full height
6	PCIe	X4	X8	Dynamic	Full Length, full height

Storage Controller	HP Embedded SATA RAID Controller or HP 8 Internal Port SAS Host Bus Adapter with RAID

Storage	Diskette Drive	None ship standard 1.44 MB USB Diskette Drive Option available
	Optical Drive	48x IDE (ATAPI) CD-ROM Drive
	Hard Drives	None ship standard SAS and SATA HDD options are available

Maximum Internal Storage	SATA	4.5TB (6 x 750GB) SATA (With standard SATA controller)
	SAS	1.8TB (6 x 300GB) SAS (With optional SAS controllers)
	NOTE: Support for a single logical drive limited to 2TB. NOTE: Information below pertains to SATA configuration: - In BIOS revisions prior to 11/03/2006, the default configuration for SATA models will not recognize when more than four drives are installed while running Microsoft Windows operating system. To recognize all six drives, AHCI mode has to be enabled and SATA AHCI driver installed. For further information on how to enable AHCI mode, please refer to the RTF card that is shipped with the server or posted on http://www.hp.com. - When configuring RAID using the embedded SATA RAID controller, two arrays have to be set up to recognize all six drives.

Interfaces	Parallel	0
	Serial	1
	Pointing Device (Mouse, PS2)	1
	Graphics	1
	Keyboard (PS2)	1
	USB 2.0 Ports Dedicated USB	7 (3 Rear, 2 Front, and 2 Internal) 1 (available for USB tape connectivity) NOTE: Please see the following URL for additional information regarding USB support: http://h18004.www1.hp.com/products/servers/platforms/usb-support.html.
	Network RJ-45 (Ethernet)	1 (10/100/100 Gbits/s)
	Remote Management	1 (10/100 via optional Lights-Out 100 Remote Management Card)

Graphics	Integrated 2MB SRAM video

Form Factor	Tower (5U). Rack mounting available via rack mount option kit (P/N 408697-B21)

Industry Standard Compliance	ACPI V2.0 compliant
	PCI 2.3 compliant
	PXE Support
	WOL Support
	Microsoft® Logo certifications

Manageability	Optional HP ProLiant Lights-Out 100 Remote Management Card Embedded IPMI standard reporting

Security	Power-on password Setup password Diskette boot control

Server Power Cords	One Lowline NEMA power cord

Power Supply	One 650 W Power, Non-hot plug, non-redundant

System Fans	2 - Non-hot plug, Non-redundant system fans

OS Support	Microsoft Small Business Server 2003 (32 and 64 bit) Microsoft Windows 2003 Server, Standard Edition (32 and 64 bit) Microsoft Windows 2003 Server, Web Edition Microsoft Windows 2003 Server, Enterprise Edition (32 and 64 bit) Microsoft Windows 2000 Server Netware 6.5 SCO OpenServer Legend 6.0 SCO Unixware 7.1.4 Red Hat Enterprise Linux SUSE Linux Enterprise Server
	NOTE: For more complete and up-to-date information of all supported OSes for ProLiants, certification information and how to buy server operating systems from HP please visit the OS product site at: http://h18004.www1.hp.com/products/servers/software/OEM.html.
	NOTE: For an up-to-date listing of the latest software and drivers available for your server, please select your server: http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?lang=en&cc= us&taskId=135&prodTypeId=15351&prodCatId=241435.
	NOTE: For more Linux OS support & certification information, please visit our the ProLiant & BladeSystem Server Linux matrix: http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert.html

Factory Express Portfolio for Servers and Storage

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging and custom packaging to meet customer needs. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant & HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services on your specific server model please contact your sales representative or go http://www.hp.com/go/factory-express.

HP Enterprise Configurator	The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.

Server Management Stand Alone Software Product

HP Systems Insight Manager

HP Systems Insight Manager (HP SIM) provides web server discovery, association, and launch

Core Infrastructure Management

Subscriber's Choice

Subscriber's Choice Driver and Support Alerts/Notifications is a web-based email subscription service that provides software and driver change notifications for ProLiant products. Sign up at http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis.

Service and Support

This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services or customized service agreements.

NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day response. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service - Simplify ProLiant solution implementation, maintenance and management.

Support Service -3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
Deployment Service - Hardware Installation only

Enhanced Service - Optimize service level to increase IT performance and availability

Support Service - 3 Year 13x5 Same Business Day, 4-Hour response coverage
Deployment Service - Installation and Start-up only

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack

Models

NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section.
SAS/SATA Models
HP ML150G3 E5310 HP-SAS/SATA, 1GB 438786-xx1 HP ML150G3 5130 HP-SAS/SATA,1GB 416773-xx1	Processor(s) One of the following depending on Model	(1)Quad-Core Intel® Xeon® processor E5310 (1.60 GHz, 1066 FSB, 80W) (1)Dual-Core Intel® Xeon® processor 5050 (3.00 GHz, 667 FSB, 130W) (1)Dual-Core Intel® Xeon® processor 5130 (2.0 GHz, 1333 FSB, 80W)
	Cache Memory One of the following depending on Model	Integrated 2x2MB L 2 cache (5000 sequence) Integrated 4MB L 2 cache (5100 sequence) Integrated 2x4MB L2 cache (5300 sequence)
	Memory	1 GB PC2-5300 Fully Buffered DIMMs (DDR2-667)
	Network Controller	Embedded HP NC7781 Gigabit Server Adapter 10/100/1000 WOL
	Storage Controller	HP 8 Internal Port SAS Host Bus Adapter with RAID
	Hard Drive	None ship standard
	Internal Storage One of the following depending on Model	1.8TB (6 x 300GB) SAS 4.5TB (6 x 750GB) SATA (With standard/optional SAS controllers and 6 optional HDD)
	Optical Drive	48x CD-ROM
	Form Factor	Tower standard; 5U Rack via optional rack mounting kit

SATA Models
HP ML150G3 5110 NHP-SATA,512MB 416769-xx1 HP ML150G3 5110 HP-SATA,512MB 416768-xx1 HP ML150G3 5120 HP-SATA,512MB 416770-xx1 HP ML150G3 5130 HP-SATA,512MB 416772-xx1	Processor(s) One of the following depending on Model	(1)Dual-Core Intel® Xeon® processor 5050 (3.00 GHz, 667 FSB, 130W) (1)Dual-Core Intel® Xeon® processor 5110 (1.6 GHz, 1066 FSB,65W) (1)Dual-Core Intel® Xeon® processor 5120 (1.86 GHz, 1066 FSB, 65W) (1)Dual-Core Intel® Xeon® processor 5130 (2.0 GHz, 1333 FSB, 65W)
	Cache Memory	Integrated 2x2MB L2 cache (5000 sequence) Integrated 4MB L2 cache (5100 sequence) Integrated 2x4MB L2 cache (5300 sequence)
	Memory	512 MB PC2-5300 Fully Buffered DIMMs (DDR2-667)
	Network Controller	Embedded HP NC7781 Gigabit Server Adapter 10/100/1000 WOL
	Storage Controller	HP Embedded SATA RAID Controller
	Hard Drive	None ship standard
	Internal Storage	4.5TB (6 x 750GB) SATA (With standard SATA controller and 6 optional HDD)
	Optical Drive	48x CD-ROM
	Form Factor	Tower standard; 5U Rack via optional rack mounting kit
NOTE: In BIOS revisions prior to 11/03/2006, the default configuration for SATA models will not recognize when more than four drives are installed while running Microsoft Windows operating system. To recognize all six drives, AHCI mode has to be enabled and SATA AHCI driver installed. For further information on how to enable AHCI mode, please refer to the RTF card that is shipped with the server or posted on http://www.hp.com. NOTE: When configuring RAID using the embedded SATA RAID controller, two arrays have to be set up to recognize all six drives. NOTE: Only hot plug drives are supported on the ML150 G3; these hot plug drives, when installed on Non-hot plug models, will not have hot plug functionality. NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.

Country Code Key	XX=00	NA
	XX=01	Australia
	XX=03	UK
	XX=04	Germany
	XX=05	France
	XX=20	Brazil
	XX=29	Japan
	XX=37	AP
	XX=42	Euro
	XX=AA	PRC
	XX=AB	Taiwan
	XX=AD	Korea

Configuration Information-Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis. NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
Step 1: Base Configuration (Select only one model from the following selections)
Models	HP ProLiant ML150 G3 Non-hot Plug SATA CTO Chassis	403111-B21
	Factory Integrated Models ship with:
	Embedded HP NC7781 Gigabit Server Adapter 10/100/1000 WOL
	Single 650W Power Supply
	Tower 5U Form Factor
	HP ProLiant ML150 G3 Hot Plug SATA CTO Chassis	403112-B21
	Factory Integrated Models ship with:
	Embedded HP NC7781 Gigabit Server Adapter 10/100/1000 WOL
	Single 650W Power Supply
	Tower 5U Form Factor

Step 2: Choose Required Options (Select only one option from each category unless otherwise noted)
Processors	Quad-Core Processor Option Kits
	Quad-Core Intel® Xeon® processor E5335 (2.00 GHz, 80 W, 1333 MHz FSB) NOTE: If 2 processors are desired, select one 437905-L21and one 437905-B21	437905-L21
	Quad-Core Intel® Xeon® processor E5310 ( 1.6 GHz, 1066 FSB, 80W) NOTE: If 2 processors are desired, select one 437903-L21and one 437903-B21	437903-L21
	Quad-Core Intel® Xeon® processor E5320 ( 1.86 GHz, 1066 FSB, 80W) NOTE: If 2 processors are desired, select one 436460-L21 and one 436460-B21	436460-L21
	Dual-Core Processor Option Kits
	Dual-Core Intel® Xeon® processor 5110 (1.6 GHz, 1066 FSB, 65W), FIO NOTE: If 2 processors are desired, select one 417555-L21and one 417555-B21	417555-L21
	Dual-Core Intel® Xeon® processor 5120 (1.86 GHz, 1066 FSB, 65W), FIO NOTE: If 2 processors are desired, select one 417556-L21and one 417556-B21	417556-L21
	Dual-Core Intel® Xeon® processor 5130 (2.0 GHz, 1333 FSB, 65W), FIO NOTE: If 2 processors are desired, select one 417557-L21and one 417557-B21	417557-L21
	Dual-Core Intel® Xeon® processor 5140 (2.33 GHz, 1333 FSB, 65W), FIO NOTE: If 2 processors are desired, select one 417558-L21and one 417558-B21	417558-L21
	Dual-Core Intel® Xeon® processor 5150 (2.66 GHz, 1333 FSB, 65W), FIO NOTE: If 2 processors are desired, select one 418226-L21and one 418226-B21	418226-L21
Memory	512MB FBD PC2-5300 1x512MB Kit	413507-B21
	1GB FBD PC2-5300 2X512MBKit	397409-B21
	2GB FBD PC2-5300 2X1GB Kit	397411-B21
	4GB FBD PC2-5300 2X2GB Kit	397413-B21
Optical Drives	48X CD-ROM Kit	398972-B21
	CD-RW/DVD-ROM Combo Drive Option Kit	331346-B21
	HP DVD+R/RW 16X Half Height	383974-B21
	16X DVD-ROM Drive Option Kit (Carbon)	217053-B21
	USB Floppy Drive, External	DC361B
	NOTE: For the installation of Windows and other OS's, a floppy drive may be required to complete driver installation. A USB drive key may not work to complete driver installation.
Hard Drives	SATA Hot Plug Drives
	HP 750GB 1.5G SATA 7.2K 3.5" HDD	432341-B21
	HP 500GB 1.5G SATA 7.2K 3.5" HDD	395473-B21
	HP 250GB 1.5G SATA 7.2K 3.5" HDD	349239-B21
	HP 160GB 1.5G SATA 7.2K 3.5" HDD	349238-B21
	HP 80GB 1.5G SATA 7.2K 3.5" HDD	349237-B21
	SAS Hot Plug Drives
	HP 300GB 3G SAS 15K 3.5" SP HDD	431944-B21
	HP 146GB 3G SAS 15K 3.5" SP HDD	375872-B21
	HP 72GB 3G SAS 15K 3.5" SP HDD	375870-B21
	NOTE: SAS hard drives require a SAS HBA or Smart Array Controller.
	NOTE: Only hot plug drives are supported on the ML150 G3; these hot plug drives, when installed on Non-hot plug models, will not have hot plug functionality.

Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Options" section below. Some options may not be available for factory integration. Please contact an HP sales representative for additional information.
Operating Systems	Pre-install Microsoft Windows 2003 Standard (English)	409167-B21
	Pre-install Microsoft Windows 2003 Small Business Server, Premium Edition (English)	379603-B21
	NOTE: For additional language part numbers, please visit: http://www.hp.com/go/microsoft and select 'HP & Windows OS'.
	NOTE: For additional options, please refer to the "Options" section below.

Options

Processors	Quad-Core Processor Option Kits
	Quad-Core Intel® Xeon® processor E5335 (2.00 GHz, 80 W, 1333 MHz FSB)	437905-B21
	Quad-Core Intel® Xeon® processor E5310 ( 1.6 GHz, 1066 FSB)	437903-B21
	Quad-Core Intel® Xeon® processor E5320 ( 1.86 GHz, 1066 FSB, 80W)	436460-B21
	Dual-Core Processor Option Kits
	Dual-Core Intel® Xeon® processor 5110 (1.6 GHz, 1066 FSB)	417555-B21
	Dual-Core Intel® Xeon® processor 5120 (1.86 GHz, 1066 FSB)	417556-B21
	Dual-Core Intel® Xeon® processor 5130 (2.0 GHz, 1333 FSB)	417557-B21
	Dual-Core Intel® Xeon® processor 5140 (2.33 GHz, 1333 FSB,65W)	417558-B21
	Dual-Core Intel® Xeon® processor 5150 (2.66 GHz, 1333 FSB, 65W)	418226-B21

Memory	512MB FBD PC2-5300 1x512MB Kit	413507-B21
	1GB FBD PC2-5300 2X512MB Kit	397409-B21
	2GB FBD PC2-5300 2X1GB Kit	397411-B21
	4GB FBD PC2-5300 2X2GB Kit	397413-B21

Optical Drives	48X CD-ROM Kit	398972-B21
	CD-RW/DVD-ROM Combo Drive Option Kit	331346-B21
	HP DVD+R/RW 16X Half Height	383974-B21
	16X DVD-ROM Drive Option Kit (Carbon)	217053-B21
	USB Floppy Drive, External	DC361B
	NOTE: For the installation of Windows and other OS's, a floppy drive may be required to complete driver installation. A USB drive key may not work to complete driver installation.

Hard Drives	SATA Hot Plug Drives
	HP 750GB 1.5G SATA 7.2K 3.5" HDD	432341-B21
	HP 500GB 1.5G SATA 7.2K 3.5" HDD	395473-B21
	HP 250GB 1.5G SATA 7.2K 3.5" HDD	349239-B21
	HP 160GB 1.5G SATA 7.2K 3.5" HDD	349238-B21
	HP 80GB 1.5G SATA 7.2K 3.5" HDD	349237-B21
	SAS Hot Plug Drives
	HP 300GB SAS 15K 3.5" SP HDD	431944-B21
	HP 146GB 3G SAS 15K 3.5" SP HDD	375872-B21
	HP 72GB 3G SAS 15K 3.5" SP HDD	375870-B21
	NOTE: SAS hard drives require a SAS HBA or Smart Array Controller.
	NOTE: Only hot plug drives are supported on the ML150 G3; these hot plug drives, when installed on Non-hot plug models, will not have hot plug functionality.
	NOTE: The purchase of SAS HBA or array controller is required.

Storage Controllers	HP SC44Ge Host Bus Adapter	416096-B21
	HP SC11Xe Host Bus Adapter	412911-B21
	64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2	374654-B21
	HP 8 Internal Port SAS Host Bus Adapter with RAID	347786-B21
	HP Smart Array E200/128 BBWC Controller	411508-B21
	128-MB BBWC (Battery-Backed Write Cache) Enabler NOTE: Supports the Smart Array E200 Controller.	351580-B21
	HP ML150G3 1-PORT SATA RAID Cable NOTE: This cable is required for each additional SATA hard drive	413748-B21
	HP SAS/SATA 4 in 1 to 4 in Cable NOTE: This cable is required when adding either the HP 8 Internal Port SAS HBA with RAID or the HP Smart Array E200 on a hot-plug SATA model or SC44GE HBA.	438160-B21
	HP Internal SAS/SATA 4-Port Cable NOTE: This cable is required when adding either the HP 8 Internal Port SAS HBA with RAID or the HP Smart Array E200 on a non hot-plug SATA model	430479-B21
	NOTE: Hot plug SATA servers come with a hot plug backplane, making them hot plug ready. For full hot plug capability on the hot plug SATA models, a hot plug controller (347786-B21) must also be purchased

Communications	HP NC110T PCI Express Gigabit Server Adapter NOTE: Does not support Windows 2000.	434905-B21
	HP NC360T PCI Express Dual Port Gigabit Server Adapter	412648-B21
	HP NC364T PCI Express Quad Port Gigabit Server Adapter NOTE: Does not support Windows 2000.	435508-B21
	HP NC373F PCI Express Multifunction Gigabit Server Adapter	394793-B21
	HP NC373T PCI Express Multifunction Gigabit Server Adapter	394791-B21
	Agere2006 PCI Hi-Speed 56K Modem	440519-B21

Remote Management	HP ProLiant ML150 G3 Lights-Out 100 Remote Management Card	403582-B21

Tape Drives	NOTE: Installation of SCSI internal tape drives in a ML150 model requires SCSI controller kit (PN: 374654-B21).
	NOTE: For complete listing of tape drive offerings see: http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
	USB Tape Drives
	HP StorageWorks DAT 72 USB Internal Tape Drive (Carbonite)	DW026A
	HP ProLiant DAT 160 USB Internal Tape Drive NOTE: Available in North America only.	EH976A
	Ultrium Tape Drives
	HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive (Carbonite)	DW085A
	HP ProLiant Ultrium 920 SAS Internal Tape Drive NOTE: Available in North America only.	EH978A

HP D2D Backup System	HP StorageWorks D2D110 Backup System NOTE: 1TB of Disk Storage	EH880A
	HP StorageWorks D2D110 Backup System with Data Protector Express Software Kit NOTE: 1TB of Disk Storage	EH923A
	HP StorageWorks D2D120 Backup System NOTE: 2TB of Disk Storage	EH884A
	HP StorageWorks D2D120 Backup System with Data Protector Express Software Kit NOTE: 2TB of Disk Storage	EH924A
	HP StorageWorks D2D130 Backup System NOTE: 3TB of Disk Storage.	EH950A
	HP StorageWorks D2D130 Backup System with Data Protector Express Software Kit NOTE: 3TB of Disk Storage.	EH951A
	HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive NOTE: 3TB of Disk Storage.	EH952A
	NOTE: Please see the HP D2D Backup Systems QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/12651_div/12651_div.html (Worldwide)

Uninterruptible Power Systems - Tower Supply	HP T750 UPS, Low Voltage (NA/JPN)	378439-D71
	HP T750 UPS, High Voltage (INTL)	378439-B31
	HP T1000 UPS	AF403A

Installation of Server into Racks	ProLiant ML150 G3 Tower to Rack Conversion Kit	408697-B21

HP KVM Switch Options	IP Console Switch with Virtual Media (KVM/IP), 4x1x16	AF602A
	IP Console Switch with Virtual Media (KVM/IP), 2x1x16	AF601A
	Server Console Switch with Virtual Media (KVM), 0x2x16	AF600A
	PS2 Virtual Media Interface Adapter, 1 Pack NOTE: The AF604A is only compatible with the Console Switches with Virtual Media	AF604A
	PS/2 Interface Adapter, 1 pack	262588-B21
	PS/2 Interface Adapter, 8 pack	262587-B21
	USB Interface Adapter, 1 pack	336047-B21
	Serial Interface adapter - 1 Pack with power supply	373035-B21
	NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches. Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm.
	HP 1x4 Console Switch	AF611A
	HP PS2 Server Console Cable, 6 foot, 2-Pack	AF612A
	HP USB Server Console Cable, 6 foot, 2-Pack NOTE: required for supporting USB peripherals.	AF613A
	NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.

USB Options	HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver)	DC172B
	HP USB 04 Standard Keyboard	DT528A#xxx
	USB 2.0 4-port HUB	DG954A
	HP 1GB USB 2.0 Floppy Drive Key	442085-B21
	HP 256MB USB 2.0 Floppy Drive Key	442084-B21

Service and Support Offerings (HP Care Pack Services)	Extended Care - Minimum recommended service support offer designed to ensure customers have access to expert assistance, whenever they need it. Next Business Day On-Site Service, 9-Hour x 5-Day Coverage, 3 Years, Electronic	U8184E
	Committed Care - Cost-effective service options designed to extend HP Services committed response and guaranteed fix times, designed to speed problem resolution. 4-Hour On-Site Service -13-Hour x 5-Day Coverage, 3 Years, Electronic	U8192E
	Committed Response - Highest HP Support service level recommend to help increase IT performance and availability with comprehensive, consistent hardware and software services 4-Hour On-Site Service - 24-Hour x 7-Day Coverage, 3 Years, Electronic	U8193E
	Deployment Services - HP Installation and Start Up services designed to take time, risk, and worry out of the deployment of ProLiant servers - and free customers people to focus on what they do best, their business. Hardware Installation, Electronic (install services)	U8195E
	NOTE: For more information, customer/resellers can contact http://www.hp.com/services/carepack.

Memory

HP ProLiant ML150 Generation 3 Server

Standard Memory
512 MB of PC2-5300 Fully Buffered DIMMs (DDR2-667)

Standard Memory Plus Optional Memory
Up to 5120 MB memory is available with the optional installation of PC2-5300 Fully Buffered DIMMs (DDR2-667) Memory kits.

Standard Memory Replaced with Optional Memory
Up to 8192 MB of memory is available with the removal of the standard 512-MB of memory and the optional installation of PC2-5300 Fully Buffered DIMMs (DDR2-667) Memory kits.

NOTE: Charts do not represent all possible memory configurations. Memory must be populated in one of the following ways: Slot 1 only; slots 1 and 3 only (pairs must be of the same size); or slots 1, 2, 3, and 4 (pairs must be of the same size and in the example below with slots 1 and 3 the same and slots 2 and 4 the same)

Memory		Slot
		1	2	3	4
Standard	512 MB	512 MB	Empty	Empty	Empty
Optional	5120 MB	512 MB	2048 MB	512 MB	2048 MB
Maximum	8192 MB	2048 MB	2048 MB	2048 MB	2048 MB

NOTE: Please make sure socket 1 is populated, otherwise the system will not boot, also please make sure the DIMM socket 1,3 and 2,4 should be the same size, otherwise the capacity will not be correct.
Following are memory options available from HP:
512MB FBD PC2-5300 1x512MB Kit	413507-B21
1GB FBD PC2-5300 2X512MB Kit	397409-B21
2GB FBD PC2-5300 2X1GB Kit	397411-B21
4GB FBD PC2-5300 2X2GB Kit	397413-B21

Storage

Non-Hot Plug SATA or Hot Plug SAS/SATA
	1	48x IDE CD-ROM
	2	Removable Media Bay (1.6" each)
	3	Six Hot Plug SAS/SATA or Six Non-Hot Plug SATA Drive Bays

Drive Support
	Quantity Supported	Position Supported	Controller
Removable Media
IDE CD-ROM Drive	Up to 2	1 or 2	Integrated IDE

Hard Drives
SAS (Hot Plug Drives)
	Quantity Supported	Position Supported	Controller
300GB SAS 15K SPP SP 146GB SAS 15K SPP SP 72GB SAS 10K SPP SP 36GB SAS 10K SPP SP	Up to 6	3 (Drive slots 1-6)	HP 8 Internal Port SAS Host Bus Adapter with RAID Optional Smart Array E200

Hard Drives
SATA
	Quantity Supported	Position Supported	Controller
750 GB 500 GB 250 GB 160 GB 80 GB	Up to 6	3 (Drive slots 1-6)	Integrated 6 port SATA Adapter Optional HP 8 Internal Port SAS Host Bus Adapter with RAID

NOTE: In order to realize Hot-Plug functionality in the HP SATA Models of the ML150 G3, the 8 Port Internal Port SAS Host Bus Adapter with RAID (P/N 347786-B21) must be purchased and installed.
Maximum Storage Capacity - SAS Models
Internal	1.8TB (6 x 300 GB SAS hard drives)
Total	1.8TB (6 x 300 GB SAS hard drives)
Maximum Storage Capacity - SATA Models
Internal	4.5TB (6 x 750 GB SATA drives)
Total	4.5TB (6 x 750 GB SATA drives)

Tape Drives
NOTE: A SCSI controller needs to be purchased to operate internal SCSI devices in the SATA Models. NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following: http://h18000.www1.hp.com/products/quickspecs/Division/10233.html (Worldwide)
	Position Supported	Controller	Controller/HBA Option Kit Part Number
Internal USB Tape Drives DAT 72 USB DAT 160 USB	2	USB 2.0 port	N/A

External USB Tape Drives DAT 72 USB DAT 160 USB	External	USB 2.0 port	N/A

Internal SCSI Tape Drives DAT 72 DAT 160 LTO-2 Ultrium 448 LTO-3 Ultrium 920	2	64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2	374654-B21

External SCSI Tape Drives DAT 72 DAT 160 LTO-2 Ultrium 448 LTO-3 Ultrium 920	External	64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2	374654-B21

Internal SAS Tape Drives DAT 160 LTO-2 Ultrium 448 LTO-3 Ultrium 920	2	HP 8 Internal Port SAS Host Bus Adapter with RAID HP SC44Ge Host Bus Adapter	347786-B21 416096-B21

External SAS Tape Drives DAT 160 LTO-2 Ultrium 448 LTO-3 Ultrium 920		HP SC44Ge Host Bus Adapter	416096-B21

HP StorageWorks D2D Backup Systems D2D110 D2D120 D2D130	External	Embedded Network Controller	N/A

Power Specifications

Part Number	402075-001
Spare Kit	407730-001
Operational Input Voltage Range (Vrms)	90 to 135 and 180 to 264 V ac full ranging
Frequency Range (Nominal) (Hz)	47 to 63 Hz

Nominal Input Voltage (Vrms)	100	115	208	220	230	240
Max Rated Output Wattage Rating	600	600	600	600	600	600
Nominal Input Current (A rms)	10	10	5	5	5	5
Max Rated Input Wattage Rating (Watts)	800	800	750	750	750	750
Max. Rated VA (Volt-Amp)	800	800	780	780	780	780
Efficiency (%)	75	77	79	80	80	80
Power Factor	0.95	0.95	0.9	0.9	0.9	0.9
Leakage Current (mA)	3.5mA	3.5mA	3.5mA	3.5mA	3.5mA	3.5mA
Maximum Inrush Current (A peak)	50	50	50	50	50	50
Maximum Inrush Current duration (mS)	3	3	3	3	3	3


System Specifications

	Power**
HP ProLiant ML150 G3 Fully Configured	(see**)
Fully Loaded System Input Wattage (W)	420W
Fully Loaded System Input Current (A rms)	5A @ 115V, 2.5A @ 230V
Fully Loaded System Thermal (BTU- Hr)r)	1435 BTU
Fully Loaded System VA (Volt-Amp)	420
System Leakage with all power supplies loaded (mA)	3.5mA
System Inrush Current with all power supplies loaded (A)	50A
Power cord requirements	Nema 5-15P to IEC320-C13
Power cord requirements	IEC320-C13 to IEC320-C14
	**Power shown is for a fully configured system consisting of:
	(2) CPU (4) double-sided DIMMs (6) HDDs SAS/SATA (1) CD-ROM (0) DVD-ROM (3) PCI-X 64 100MHz (1) x4 PCI-E (1) x8 PCI-E (1) PCI 32 3.3V (1) Lights-Out Remote Management (1) 650 watts power supply

Power Cords (13 Cord Sets)
Country	Power Cord Part Number(s)
APD	100614-009, 100613-008, 139867-004, 187487-004(India)
Brazil	285052-001
Italy	109197-008
Australia/New Zealand	100661-001
Euro	100614-009
France	100614-009
Germany	100614-009
Japan	139867-004
PRC	286496-001
UK/Singapore	100613-008
US, Taiwan	121565-001

Technical Specifications

System Unit	Dimensions (HxWxD)	17.83 in x 8.62 in x 25.59 in (45.3 x 21.9 x 65.0 cm)
	Weight (approximate)	69 lb (31.3 kg)
	Input Requirements (per power supply)	Range Input Voltage	90 to 135 VAC/180 to 265 VAC
	Input Requirements (per power supply)	Normal Line Voltage	100 to 120/200 to 240 VAC
	Line Frequency	50 to 60 Hz
	Rated Input Current	load 11.6A at 115VAC, 5.5A at 220VAC
	BTU Rating	2218 BTU
	Power Supply Output Power (per power supply)	Rated Steady-State Power	600W
	Power Supply Output Power (per power supply)	Maximum Peak Power	660W
	Temperature Range*	Operating	50° to 93° F (10° to 35° C)
	Temperature Range*	Shipping	-40° to 140° F (-40° to 60° C)
	Relative Humidity (non-condensing)	Operating	10% to 90%
	Relative Humidity (non-condensing)	Non-operating**	10% to 95%
	Acoustic Noise	Idle (Fixed Disk Drives Spinning)	38 dBA