contents
 Overview      Standard Features      HPC Interconnects      Models      Smart Buys      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Overview

HP ProLiant DL385 Generation 2 (G2)

 
Front View:
Rear View:
1.Eight sockets for PC2-5300 DIMMs (DDR2-667) with Advanced ECC1.T-10/T-15 Torx screwdriver
2.External option blank
2.Hot-plug fans, full redundancy3. NIC 2 connector
3.Systems Insight Display4.NIC 1 connector
4.Quick release lever for rapid server access5. Power supply bay 2
5. Support for eight Small Form Factor hot plug hard drives bays6. Power cord connector
6. Front LEDs (show server status) and Unit Identification button/LED (for easy in rack server identification)7. Power supply bay 1 (populated)
8. Integrated Lights-Out 2 (iLO 2) connector
7. Two front USB ports (+two rear, one internal USB port)9. Video connector
8. AMD Dual Core Rev. F Processor (Performance models include two processors)10. USB connectors (2)
11. Serial connector
9. Hot plug power supply, redundancy option (High performance models include redundant power supply)12. Mouse connector
13.Keyboard connector
10. Three PCI-E non-hot plug expansion slots (or optional mixed PCI-X/E expansion cage or optional x16 PCI-E expansion cage). Two additional PCI-E slots embedded on system board. This provides Four available PCI-E non-hot plug expansion slots for use; one consumed by Smart Array Controller14.Expansion slot 1
15.Expansion slot 2
16.Expansion slot 3
17.Expansion slot 4
11.Quick removal access panel18.Expansion slot 5
What's New
  • New Quad-Core AMD Opteron™ Processor 2356 (2.3 GHz / 75 Watts) upgrade kit
  • New Quad-Core AMD Opteron™ Processor 2352 (2.1 GHz / 75 Watts) upgrade kit
At A Glance

The HP ProLiant DL385, the world's largest selling AMD server, delivers on its history of design excellence with enterprise-class uptime and manageability, proven 2-way, dual core AMD Opteron™ performance, and 2U density for a variety of rack deployments and applications.

  • Processors:
    • AMD Dual-Core Rev F, 2200 series processors with 2MB (2 x 1MB) Level 2 cache for blazing performance; systems support up to 2 processors (2 processors standard on all Performance models)
    • AMD Quad-Core, 2300 series processors with 2MB (4 x 512KB) Level 2 cache and 2MB (1 x 2MB) Level 3 cache
    • Preconfigured Performance models save valuable deployment time at a discounted bundle price
    • Serverworks HT-2100 Northbridge and HT1000 Southbridge chipset
  • Memory:
    • Up to 32 GB PC2-5300 DIMMs (DDR2-667). Standard models support 2:1 Interleaving. Bank Interleaving (Data saved across 2 pairs of DIMMs) and Node interleaving supported (data saved across 2 processors memory sets) also available.
  • Storage Controller:
    • Performance Models: Smart Array P400/512MB BBCW Controller (RAID 0/1/5/6)
    • Base Models: Smart Array P400/256MB Controller (RAID 0/1/1+0/5)
      • Upgrade to 512 MB cache w/o Battery Backed Cache module, optional BBWC
      • The Smart Array P400/256MB Controller ships installed in slot 1 (slots 2-5 are available)
    • Entry Model: Smart Array E200/64MB Controller (RAID 0/1)
      • Upgrade to 128 MB cache, adds Raid 5 and BBWC
      • The Smart Array E200/64MB Controllers ships installed in slot 3
  • Internal Drive Support:
    • (8) small form factor (SFF) hot-plug drive bays to support Serial-attached SCSI (SAS) and Serial ATA (SATA) drives
  • Network Controller:
    • Two embedded NC373i Multifunction Gigabit Network Adapters with TCP/IP Offload Engine, including support for Accelerated iSCSI through an optional Licensing Kit
  • Expansion Slots:
    • 4 Total PCI-Express slots: three x8 and one x4.
    • Optional mixed 2 PCI-X / two x8 PCI-Express and Optional cage with PCI-Express with one x8, one x16 and one x4 configurations available.
  • USB 2.0 Ports:
    • 5 total ports: (2) ports up front; (2) ports in back; (1) port internal
  • Redundancy:
    • Fully redundant hot plug fans
    • Hot plug power supply with optional redundancy (Included in Performance models)
  • Management:
    • Integrated Lights-Out 2 featuring Integrated Remote Console with KVM over IP performance over shared network access
    • Automatic Server Recovery (ASR), ROM Based Setup Utility (RBSU), HP System Insight Manager, Status LEDs including system health and UID and SmartStart
    • System Insight Display on the front bezel for quick and easy server diagnostics
  • Form Factor:
    • Rack (2U), (3.5-inch)
  • Deployment/Serviceability:
    • Quick Deploy Rail System includes sliding universal rails, an ambidextrous cable management arm and quick release levers for fast and easy serviceability
    • Tool-less access to all system components for easy in rack serviceability
    • Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
  • Warranty:
    • This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives have a one-year warranty.
      NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
contents
 Overview      Standard Features      HPC Interconnects      Models      Smart Buys      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Standard Features
NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/erc/downloads/4AA0-8261enw.pdf.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section.
Processor
One of the following depending on Model		 AMD Opteron™ Processor 2356 (2.3 GHz, 75 Watts)
AMD Opteron™ Processor 2352 (2.1 GHz, 75 Watts)
AMD Opteron™ Processor 2222 (3.0 GHz, 75 Watts)
NOTE: CTO only.
AMD Opteron™ Processor 2220 (2.8 GHz, 75 Watts)
AMD Opteron™ Processor 2218 (2.6 GHz, 75 Watts)
AMD Opteron™ Processor 2218 HE (2.6 GHz, 55 Watts)
NOTE: CTO only.
AMD Opteron™ Processor 2216 HE (2.4 GHz, 55 Watts)
AMD Opteron™ Processor 2216 (2.4 GHz, 75 watts)
NOTE: CTO only.
AMD Opteron™ Processor 2214 HE (2.2 GHz, 55 Watts)
AMD Opteron™ Processor 2212 HE (2.0 GHz, 55 Watts)
NOTE: CTO only.
AMD Opteron™ Processor 2210 HE (1.8 GHz,55 Watts)
AMD Opteron™ Processor 2210 (1.8 GHz, 75 Watts)
NOTE: CTO only.
NOTE: Up to 2 processors supported. High Performance Model configurations include two processors, Upgraded memory to 512, BBWC, DVD/CDRW and Redundant Power Supply.
Cache Memory 2MB (2 x 1MB) Level 2 cache (2200 series)
2MB (4 x 512KB) Level 2 cache and 2MB (1 x 2MB) Level 3 cache (2300 series)
Chipset Serverworks HT-2100 Northbridge and HT1000 Southbridge Chipset
Upgradeability Upgradeable to 2 processors
Memory Protection Advanced ECC
MemoryTypePC2-5300 DIMMs (DDR2-667)
Standard models support 2:1 Interleaving, with Bank Interleaving (Data saved across 2 pairs of DIMMs) and Node interleaving supported (data saved across 2 processors memory sets) available.
NOTE: DIMM banks are active only when the corresponding processor socket is populated.
Standard
(Entry Models)		1 GB (2 x 512 MB)
Standard
(Base Models)		 2 GB (2 x 1 GB)
Standard
(Performance Models)		4 GB (4 x 1 GB)
Maximum32 GB (8 x 4 GB)
Network Controller Two embedded NC373i Multifunction Gigabit Network Adapters with TCP/IP Offload Engine, including support for Accelerated iSCSI through an optional Licensing Kit
Expansion Slots
 
With Standard PCIe Riser Installed
NOTE: For PCIe only situations. 		Expansion Slots # Technology Bus Width** Connector Width Bus Number* Form Factor Notes
1 PCIe x8 x8 70 Low profile slot Reserved slot for Smart Array P400 Controller
2 PCIe x8 x8 67 Low profile slot  
3 PCIe x4 x8 11 Full length, full height slot  
4 PCIe x8 x16 8 Full length, full height slot  
5 PCIe x8 x16 5 Full length, full height slot  
* Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number.
** Indicates the number of physical electrical lanes running to the connector.
 
With Optional PCIe x16 150 W Riser Installed
NOTE: For PCIe only situations.		 Expansion Slots # Technology Bus Width** Connector Width Bus Number* Form Factor Notes
1 PCIe x8 x8 70 Low profile slot Reserved slot for Smart Array P400 Controller
2 PCIe x8 x8 67 Low profile slot  
3 PCIe x4 x8 8 Full length, full height slot  
4 PCIe x16 x16 5 Full length, full height slot Supports 150W card
* Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number.
** Indicates the number of physical electrical lanes running to the connector.
 
With Optional PCIe/PCI-X Riser Installed
NOTE: For PCI-X mixed situations. 		Expansion Slots # Technology Bus Width** Connector Width Bus Number* Form Factor Notes
1 PCIe x8 x8 70 0 Low profile slot
2 PCIe x8 x8 67 0 Low profile slot
3 PCIe x8 x16 10 0 Full length, full height slot
4 PCI-X (133MHz, 3.3 Volt) 64-bit Not applicable 6 1 Full length, full height slot
5 PCI-X (133MHz, 3.3 Volt) 64-bit Not applicable 6 2 Full length, full height slot
* Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus).
*** Indicates the number of physical electrical lanes running to a PCI-e connector.
Storage Controller
One of the following depending on Model		 Performance Models: HP Smart Array P400/512MB BBWC Controller (RAID 0/1/5/6)
Base Models: HP Smart Array P400/256MB Controller (RAID 0/1/1+0/5)
Available upgrades: 512MB memory module for RAID 0/1/5/6, battery for battery-backed write cache (BBWC).
Entry Models: HP Smart Array E200/64MB Controller (RAID 0/1)
Available upgrades: 128MB memory module for RAID 0/1/5, battery for battery-backed write cache (BBWC).
Storage Diskette Drive None Standard
Optical Drive
One of the following depending on Model		 None Standard
IDE DVD-ROM/CDRW Combo included on Performance models
Hard Drives None Standard
Maximum Internal StorageHot Plug SAS1.168TB 8 x 146GB with standard internal hot plug SFF SAS drive cage
Hot Plug SATA960GB8 x 120GB
Remote Management

Integrated Lights Out 2 (iLO2) Standard Management:

  • Virtual Text Remote Console (pre-OS only)
  • Remote Serial Console
  • Virtual Power Button Control
  • Virtual Unit ID control
  • Integrated Remote Console
  • Dedicated & full function shared network connectivity
  • Embedded system health
  • Browser, command line and scripted access
  • Automatic IP Configuration via DHCP/DNS/WINS
  • Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell security (SSH)
  • OS independent hardware health status
  • IML and iLO Event Logging
  • Support for 12 user accounts with customizable access privilege
Intelligent Manageability

HP Systems Insight Manager
SmartStart
Management Agent
Redundant ROM
Remote Flash ROM
ROM-Based Setup Utility (RBSU)
Integrated Management Log
Automatic Server Recovery (ASR)
Dynamic Sector Repairing (with Smart Array controller)
Drive Parameter Tracking (with Smart Array controller)
NOTE: Upon the event of a failed processor in a multi-processing environment, the system will automatically reboot and attempt to use the remaining good processor.
Pre-Failure Warranty (covers processors, SAS hard drives and memory)
InterfacesSerial1
Pointing Device (Mouse)1
Graphics1
Keyboard1
VGA2 (1 front, 1 back)
Network RJ-452
iLO 2 remote management port1
USB 2.0 Ports5 (2 front, 2 back, 1 inside)
NOTE: Please see the following URL for additional information regarding USB support:
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html.
Graphics

Integrated ATI ES1000, 32 MB video standard

  • 16 bit color: maximum resolution of 1600 x 1200
  • 32 bit color: maximum resolution of 1280 x 1024

NOTE: Maximum resolution available via iLO 2 remote console is 1280 x 1024.

Form Factor Rack (2U), (3.5-inch)
HP Insight Control Environment Management Suite

HP Insight Control Environment delivers foundation management, including remote monitoring, hardware resource deployment, health monitoring, software version control, performance monitoring, vulnerability scanning and patch management, and power management.
HP Insight Control Environment installs and licenses the following components by default using a wizard-based integrated installer:

  • HP Systems Insight Manager
  • HP iLO Advanced Pack
  • HP Insight Power Manager
  • HP Rapid Deployment Pack
  • HP Performance Management Pack
  • HP Vulnerability and Patch Management Pack
  • HP Virtual Machine Management Pack

Additional ProLiant Essentials software and management tools included on the Insight Control Management kit can be installed manually:

  • HP Server Migration Pack - Universal Edition
    NOTE: HP Server Migration Pack - Universal Edition is licensed separately from the Insight Control Environment Suite.
  • HP Open Service Event Manager
  • HP Service Essentials Remote Support Pack
    NOTE: Server Migration Pack - Universal Edition can be installed from the SMP Universal CD included in the Insight Control Management media kit.
    NOTE: For additional product and licensing information about HP Insight Control Environment, visit: http://www.hp.com/go/ice.

HP iLO Power Management Pack is energy-efficient management software that delivers centralized control, reliable security, and energy savings for your BladeSystem infrastructure. iPMP combines the total control of iLO 2 Advanced in the area of remote management with the energy monitoring and control of the Insight Power Manager to deliver a robust solution capable of full remote control and power management of ProLiant servers through a unified interface within HP Systems Insight Manager.

HP Insight Control management suites and most HP ProLiant Essentials include a one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/insight.

Server Management Stand Alone Software Product - ProLiant EssentialsHP Systems Insight Manager HP Systems Insight Manager (HP SIM) provides a unified, secure and extensible standards-based environment to centrally manage servers, storage and other infrastructure devices, (both HP and non-HP) across multiple operating system platforms.
HP ProLiant Essentials Rapid Deployment Pack Rapid Deployment Pack (RDP) extends HP Systems Insight Manager with a complete deployment solution for HP ProLiant servers. RDP provides a central location to configure server hardware, deploy Windows, Linux and VMware ESX operating environments and install HP ProLiant Support Pack drivers using images and scripted profiles. For more information, visit: http://www.hp.com/go/rdp.
HP ProLiant Essentials Server Migration Pack - Universal Edition

Upgrading, replacing, or virtualizing your existing server? Effortlessly transition to new virtual or physical HP ProLiant servers or BladeSystem with automated, accurate and affordable migration of OS, application and data. SMP Universal automates the manual processes required for migrating servers between physical or virtual platforms, whether migrating to VMware or Microsoft virtual machines. SMP Universal allows all of the following migrations:

  • physical to ProLiant
  • physical to virtual
  • virtual to virtual
  • virtual to ProLiant

NOTE: For more information, visit: http://www.hp.com/go/migrate.

HP ProLiant Essentials Performance Management Pack Performance Management Pack (offered exclusively through the Insight Control suites) - a performance management solution that identifies and explains hardware performance bottlenecks on ProLiant servers and attached options enabling users to better utilize their valuable resources
HP ProLiant Essentials Integrated Lights-Out (iLO 2) Advanced PackUpgrades the iLO 2 processor with comprehensive remote control including Virtual KVM remote graphical console, enhanced console sharing and replay, virtual media (floppy, CD/DVD, USB key), virtual folders, and enterprise security (directory services and two-factor authentication).
HP iLO Power Management Pack Energy-efficient management software that delivers centralized control, reliable security, and energy savings for your BladeSystem infrastructure. iPMP combines the total control of iLO 2 Advanced in the area of remote management with the energy monitoring and control of the Insight Power Manager to deliver a robust solution capable of full remote control and power management of ProLiant servers through a unified interface within HP Systems Insight Manager.
HP ProLiant Essentials Accelerated iSCSI PackEnables the embedded Multifunction network controller to serve as both a NIC and an iSCSI HBA providing access to SAN storage over the same connection used for networking. Processing of the protocol stack is offloaded to the NIC reducing CPU utilization and greatly improving the speed with which the requests are processed and sent to the network.
HP Insight Power Manager (IPM)Upgrades the single-server remote management capabilities of iLO Select/Advanced to include centralized reporting and policy-based management of power consumption and thermal output provided by the Insight Power Manager. IPM unifies all of this functionality within a single user interface - HP Systems Insight Manager.
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to: http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
Core Infrastructure ManagementSmartStartSmartStart is a tool that simplifies server setup, providing a rapid way to deploy reliable and consistent server configurations. For more information, please visit the SmartStart Web site at: http://www.hp.com/servers/smartstart.
SmartStart version supported (minimum): SmartStart 7.51.
Insight Management Agents

The Insight Management Agents should be installed on all HP servers to present system instrumentation, health and configuration information into HP Systems Insight Manager and the HP System Management Homepage. The HP System Management Homepage aggregates systems data from Insight Management Agents and other HP management tools, providing a consolidated browser-based interface for managing individual servers.

Insight Management Agents and The HP System Management Homepage are included on ProLiant Support Packs, and can also be installed using the server profiles provided with the ProLiant Essentials Rapid Deployment Pack.

For additional information about the Management Agents and the HP System Management Homepage please visit the management Web site at: http://www.hp.com/servers/manage.

Subscriber's ChoiceSubscriber's Choice Driver and Support Alerts/Notifications is a web-based email subscription service that provides software and driver change notifications for ProLiant products. Sign up at: http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis.
ProLiant Support Packs and ROMPaq, softwareThe latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options, available through ProLiant Support Packs the ProLiant Essentials Rapid Deployment Pack, SmartStart or downloaded from software and drivers download pages website at: http://www.hp.com/go/support.
HP Serviceguard for Linux (SGLX)

HP Serviceguard for Linux is a high availability clustering solution designed to protect applications and services from a wide variety of software and hardware failures, monitoring the health of each server (node) and quickly responding to failures such as those that affect system processes, system memory, LAN media and adapters, and application processes.

The following is a quick summary of HP Serviceguard for Linux features and support. For the most recent list of Linux distributions & kernels, servers and storage supported with Serviceguard for Linux, see the Serviceguard for Linux Datasheet, available at: http://www.hp.com/go/sglx/info.

  • Supported Linux Distributions:
    • Red Hat EL 4
    • Red Hat EL 5
    • SUSE SLES10
  • Supported Server Platforms
    • HP Integrity BladeSystem to Superdome
    • HP ProLiant BladeSystem p-Class & c-Class
    • HP ProLiant DL
    • HP ProLiant ML
    • IBM System x
    • Dell PowerEdge
    • Sun x64
    • Fujitsu Siemens PRIMERGY
  • Hypervisors
    • HP Integrity Virtual Machines
    • VMware ESX
  • Application Integration Toolkits
    • HP Serivceguard for Linux Oracle Database Toolkit
    • HP Serviceguard Extension for SAP on Linux (SGeSAP/LX)
    • Free Application Integration Toolkits:
      • Apache
      • MySQL
      • NFS
      • PostgreSQL
      • Samba
      • Tomcat
      • Sendmail
  • Disaster Tolerant Solutions
    • HP Serviceguard for Linux Extended Distance Cluster (XDC) extends cluster distances up to 100 km, utilizes software RAID mirroring for data replication and is storage array independent
    • HP StorageWorks XP/EVA Cluster Extension Software for Linux (CLX) works seamlessly with HP Serviceguard for Linux, HP StorageWorks Continuous Access, and HP Disk Arrays to automate failover and failback between sites
  • Software updates are distributed by HP Services to customers with support contracts

NOTE: For additional information on HP Serviceguard for Linux, visit: http://www.hp.com/go/sglx or see the HP Serviceguard for Linux QuickSpecs.
NOTE: HP Serviceguard for Linux products for HP ProLiant and select 3rd party x86 class servers include one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/swsupport.

Industry Standard ComplianceACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
Security Power-on password
Keyboard password
Diskette drive control
Diskette boot control
QuickLock, Network Server Mode
Parallel and serial interface control
Administrator's password
Server Power Cords One Highline IEC Power cord ships standard (6')
NOTE: ProLiant DL servers no longer ship standard with NEMA power cords (187335-001) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the NEMA power cord (187335-001) must be ordered separately.
UPS and PDU Power
Cord Matrix 		Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications for UPS and PDU units:
ftp://ftp.compaq.com/pub/products/servers/ProLiantstorage/power-protection/powercordmatrix.pdf.
Power Supply 800 Watt, CE Mark Compliant
Optional Hot Plug AC Redundant Power Supply
System Fans Hot plug fans ship standard, fully redundant
Fully redundant hot plug fans ship standard (N+1)
Required Cabling For required cabling information, refer to the Web site at: www.hp.com/servers/dl385-g2
OS SupportMicrosoft Windows Server 2003
Microsoft Windows Small Business Server 2003, R2
Microsoft Windows 2008
Novell NetWare
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
SCO UnixWare, OpenServer
VMware Virtualization Software
Solaris 10 32/64-bit

NOTE: For more complete and up-to-date information on how to buy server operating systems from HP please visit the OS product site at: http://h18004.www1.hp.com/products/servers/software/oem.html.
NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our OS Support Matrix at: http://www.hp.com/go/supportos.
NOTE: For an up-to-date listing of the latest software and drivers available for your server, please select your server: http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?lang=en&cc
=us&taskId=135&prodTypeId=15351&prodCatId=241435.
NOTE: For more Linux OS support & certification information, please visit our the ProLiant & BladeSystem Server Linux matrix: http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert.html
NOTE: For more information on HP's Certified and Supported ProLiant Servers, please visit the VMware Server Support Matrix at: http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html.

Rack Airflow RequirementsRack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

  • Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of holes evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
  • Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm).

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server, or to the server documentation located in the Support section at the following URL: www.hp.com/servers/dl385-g2.
Rack Kit

The HP ProLiant DL385 quick deploy rail system provides tool-free support for racks with square or round mounting holes (including Compaq/HP 7000*, 9000, 10000 and HP series), with an adjustment range of 24" - 36". The ambidextrous cable management arm can be mounted on either the left or right side for improved cable management.
NOTE: Cable management arm must be removed to access hot-plug power supplies when the cable management arm is mounted on the right.
* High Airflow Inserts (High Air Flow Rack Door Insert for the 7142 Rack (single) - PN: 327281-B21; or High Air Flow Rack Door Insert for the 7142 Rack (6-pack) - PN: 327281-B22) are required to support the HP ProLiant DL385 G2 in 7000 series racks. The DL385 G2 Cable Management Arm is not supported on 7000 series racks.

Telco Rack Support

DL385 G2 Telco Rack Kit:
Support for all 2-post Telco racks requires the use of the standard rack kit and an additional option kit from Rack Solutions (http://www.racksolutions.com/hp/)
Factory Express Portfolio for Servers and Storage

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise Configurator The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.
http://www.hp.com/products/configurator.
Service and Support

HP Care Pack services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server and purchased at the same time or afterward that are internal to the enclosure. This also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included, and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions, provides a range of support services designed to meet the varying needs of your business. Whether an SMB, or large global corporation, HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service - simplify ProLiant solution implementation, maintenance, and management.

  • Support: 3-Year 4-Hour response 24x7 Same Business Day Coverage only
  • Deployment Service: Installation and Start up only

Enhanced Service - optimize service level to increase IT performance and availability.

  • Support: 3-Year Support Plus 24 only

Refer to the information on "Installation & Start-Up" for service on ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet; to be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays.

NOTE: For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack

contents
 Overview      Standard Features      HPC Interconnects      Models      Smart Buys      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

HPC Interconnects
NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL385 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to configure HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects: http://www.hp.com/techservers/clusters/ucp/index.html
HPC Interconnect InfiniBand PCI-X and PCI-Express adapters
Gigabit Ethernet Use embedded ports
Myrinet XPPCI-X Rev D and Rev E adapters
contents
 Overview      Standard Features      HPC Interconnects      Models      Smart Buys      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Models

NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section.

HP DL385 G2 Performance Models

HP DL385G2 2218 4G HPM
432195-001

HP DL385G2 2220 4G HPM
438816-001

Processor(s)
One of the following depending on Model		 (2) Dual-Core AMD Opteron™ 2218 Processors (2.6 GHz, 75 Watts)
(2) Dual-Core AMD Opteron™ 2220 Processors (2.8 GHz, 75 Watts)
Cache Memory 2MB (2 x 1MB) Level 2 cache - 2200 Series
Memory 4 GB (4 x 1 GB) of 2:1 interleaved PC2-5300 DIMMs (DDR2-667) with Advanced ECC capabilities
Network Controller Two Embedded NC373i Multifunction Gigabit Server Adapters
Storage ControllerHP Smart Array P400/512 MB BBWC Controller (RAID 0/1/5/6)
Hard DriveNone ship standard
Internal Storage1.168TB max - 8 x 146 GB SAS drives (with optional hard drives)
Optical DriveIDE DVD-ROM/CDRW combo
Form FactorRack (2U), (3.5-inch)
Availability Hot Plug Fully Redundant Fans and Redundant Power Supplies
HP DL385 G2 Base Models

HP DL385G2 2218 2G
407424-001
HP DL385G2 2216 2G
408838-001
HP DL385G2 2214 2G
407429-001
HP DL385G2 2220 2G 438815-001

Processor(s)
One of the following depending on Model
(1) Dual-Core AMD Opteron™ 2218 Processor (2.6 GHz, 75 Watts)
(1) Dual-Core AMD Opteron™ 2216 HE Processor (2.4 GHz, 55 Watts)
(1) Dual-Core AMD Opteron™ 2214 HE Processor (2.2 GHz, 55 Watts)
(1) Dual-Core AMD Opteron™ 2220 Processor (2.8 GHz, 75 watts)
Cache Memory 2MB (2 x 1MB) Level 2 cache - 2200 Series
Memory 2 GB (2 x 1 GB) PC2-5300 DIMMs (DDR2-667) with Advanced ECC capabilities
Network Controller Two Embedded NC373i Multifunction Gigabit Server Adapters
Storage ControllerHP Smart Array P400/256 MB Controller (RAID 0/1/1+0/5)
Hard DriveNone ship standard
Internal Storage1.168TB max - 8 x 146 GB SAS drives (with optional hard drives)
Optical DriveOptional DVD, DVD/CD-RW combo, DVD+R/RW
Form FactorRack (2U), (3.5-inch)
AvailabilityHot Plug Fully Redundant Fans Standard

HP DL385 G2 Entry Models

HP DL385G2 2210 1G
434940-001

Processor(s) (1) Dual-Core AMD Opteron™ 2210 HE Processor (1.8 GHz, 55 Watts)
Cache Memory 2MB (2 x 1MB) Level 2 cache - 2200 Series
Memory1 GB (2 x 512 MB) PC2-5300 DIMMs (DDR2-667) with Advanced ECC capabilities
Network Controller Two Embedded NC373i Multifunction Gigabit Server Adapters
Storage ControllerHP Smart Array E200/64 MB Controller (RAID 0/1)
Hard DriveNone ship standard
Internal Storage1.168TB max - 8 x 146 GB SAS drives (with optional hard drives)
Optical DriveOptional DVD, DVD/CD-RW combo, DVD+R/RW
Form FactorRack (2U), (3.5-inch)
AvailabilityHot Plug Fully Redundant Fans Standard
contents
 Overview      Standard Features      HPC Interconnects      Models      Smart Buys      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Smart Buys

The ProLiant Smart Buy program offers a collection of promotional server and option products that are configured with SMB in mind, offered at discounted prices, and positioned for quick delivery. Smart Buy server offers are available for a limited time only.

For a full listing of ProLiant Smart Buys available for all server families, visit ftp://ftp.compaq.com/pub/products/servers/smartbuys.pdf.

S-Buy DL385G2 2214 2GB
AH525A

 Processor(s) (1) Dual-Core AMD Opteron 2214 HE Processor (2.2 GHz, 68 Watts)
Memory 2 GB (2 x 1 GB) PC2-5300 DIMMs (DDR2-667) with Advanced ECC capabilities
Network Controller Two Embedded NC373i Multifunction Gigabit Server Adapters
Storage Controller HP Smart Array P400/256MB Controller (RAID 0/1/5)
Hard Drive None Ship Standard
Internal Storage 1.168TB max - 8 x 146GB SAS drives (with optional hard drives)
Optical Drive Slimline DVD/CD-RW (8X/24X) (ejectable)
Form Factor
 Rack (2U), (3.5-inch)
Availability Hot Plug Fully Redundant Fans and Redundant Power Supplies

S-Buy DL385G2 2218 4GB, 2P
470064-380

 Processor(s) (2) Dual-Core AMD Opteron 2218 Processor (2.6 GHz, 95 Watts)
Memory 4 GB (4 x 1 GB of 2:1 interleaved PC2-5300 DIMMs (DDR2-667) with Advanced ECC capabilities
Network Controller Two Embedded NC373i Multifunction Gigabit Server Adapters
Storage Controller HP Smart Array P400/256MB Controller (RAID 0/1/5)
Hard Drive None Ship Standard
Internal Storage 1.168TB max - 8 x 146GB SAS drives (with optional hard drives)
Optical Drive Slimline DVD/CD-RW Drive (8X/24X) (ejectable)
Form Factor
 Rack (2U), (3.5-inch)
Availability Hot Plug Fully Redundant Fans and Redundant Power Supplies
contents
 Overview      Standard Features      HPC Interconnects      Models      Smart Buys      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option only available as a Factory Installable Option.
Step 1: Base Configuration (choose one of the following configurable models)
Models HP ProLiant DL385G2 Rack CTO Chassis
414109-B21
Factory Integrated Model ships with:  
(8) SFF Serial Attached SCSI (SAS) Drive Bays
Two Embedded NC373i Multifunction Gigabit Server Adapters
PCI-Express Riser Cage
800 Watt hot plug power supply, CE Mark Compliant
One IEC Power cord
Hot plug fans (fully redundant)
Rack (2U), (3.5-inch) 		 

Step 1A: Choose SAS Controller (must choose only one of the following)
SAS Controllers HP Smart Array P400/256 for DL380 G5/ DL385 G2 FIO Controller
NOTE: PCI Express
405160-B21
HP Smart Array P400/512 BBWC for DL380 G5/ DL385 G2 FIO Controller
NOTE: PCI Express
405162-B21
HP Smart Array E200/128 BBWC Controller
NOTE: PCI Express
411508-B21
HP Smart Array P600/256 BBWC Controller
NOTE: PCI-X. SA-P600 Controller supports both internal and external drives.
337972-B21
HP Smart Array P800/512 BBWC Controller
NOTE: PCI Express
381513-B21
HP Smart Array P800/512 BBWC Controller
NOTE: PCI Express
381513-B21
HP Smart Array E200/64 FIO Controller
405528-B21
HP Smart Array 6402/512 FIO Controller
441508-B21
HP Smart Array 6404/512 FIO CNTRLR
452240-B21
Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)
Processors
 AMD Opteron™ Processor 2222 (3.0 GHz, 75 Watts) FIO
451649-L21
AMD Opteron™ Processor 2220 (2.8 GHz, 75 Watts) FIO
438825-L21
AMD Opteron™ Processor 2218 (2.6 GHz, 75 Watts) FIO
407433-L21
AMD Opteron™ Processor 2218 HE (2.6 GHz, 55 Watts) FIO
438824-L21
AMD Opteron™ Processor 2216 (2.4 GHz, 75 Watts) FIO
434945-L21
AMD Opteron™ Processor 2216 HE (2.4 GHz, 55 Watts) FIO
408840-L21
AMD Opteron™ Processor 2214 HE (2.2 GHz, 55 Watts) FIO
407435-L21
AMD Opteron™ Processor 2212 HE (2.0 GHz, 55 Watts) FIO
408837-L21
AMD Opteron™ Processor 2210 HE (1.8 GHz, 55 Watts) FIO
434943-L21
AMD Opteron™ Processor 2210 (1.8 GHz, 75 Watts) FIO
434947-L21
Base Memory NOTE: DIMM banks are active only when the corresponding processor socket is populated.  
1 GB REG PC2-5300 2 x 512 MB Single Rank Kit
408850-B21
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit
408851-B21
4 GB REG PC2-5300 2 x 2 GB Dual Rank Kit
408853-B21
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit
408854-B21
Step 3: Choose Additional Factory Integratable Options

Performance Packs

The HP ProLiant DL385 G2 performance packs are necessary to configure a HP ProLiant DL385 G2 Performance Model. HP ProLiant DL385 G2 Performance model includes the latest performance technologies and enterprise class availability features pre-installed for convenience and value. The performance pack includes a 2nd processor and a redundant power supply. To complete the configuration of a Performance model, select the Slimline CD-RW/DVD-ROM Combo Option Kit (331903-B21).
HP DL385G2 2220 HPM FIO Perf Pack
442239-B21
HP DL385G2 2218 HPM FIO Perf Pack
432858-B21
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Options" section below.
contents
 Overview      Standard Features      HPC Interconnects      Models      Smart Buys      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Options
NOTE: Some options may not be factory integratable. Contact your local sales representative for additional information.  
HP ProLiant DL385 G2 Unique Options HP 2 Slot PCI-Express x16 & x4 Riser DL385G2 ALL
410571-B21
HP Insight Control Environment Management SuiteNOTE: Electronic licensing options are available for Insight Control suites software products. Please see the appropriate Insight Control QuickSpecs for additional information.
HP Insight Control Environment
HP Insight Control Environment, No Media 1-Server License including 1 year of 24x7 Technical Support and Updates
NOTE: This part number can be purchased as a single license or as multiple licenses with a single activation key. Customer will receive a license entitlement certificate via e-mail. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service. Only available directly from HP and select resellers in the Americas region.
452148-B22
HP Insight Control Management Software Media Kit
NOTE: Insight Control Management DVD media without licenses. Contains Insight Manager and Essentials software products and components licensed by Insight Control Management suites. Uses an integrated installer to perform quick and accurate software installation and updates.
436222-B21
NOTE: For additional License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP Insight Control Linux Edition 
HP Insight Control Environment for Linux v2.0, Media pack (CD) - No licenses included
NOTE: This optional Media pack CD contains the ISO image for HP Insight Control Environment for Linux, HP System Insight Manager, and an integrated installer. Servers must be acquired separately. This Media pack is optional because the latest ISO image and latest updates may be downloaded at no cost from: http://www.hp.com/go/ice-linux (click on Download button).		464422-B21
HP Insight Control Environment for Linux v2.0, No Media, 1-Server license, including One year of 24x7 Technical Support and Updates
NOTE: This part number can be used to purchase one (1) license with a single activation key. Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service. One certificate is shipped for each license.		464423-B21
NOTE: For additional License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html  
HP Integrated Lights-Out Power Management Pack
HP iLO Power Management Pack, No Media, 1-Server License, including 1 year of 24x7 Technical Support and Updates
NOTE: This option kit includes 1 license for iLO Advanced and Insight Power Manager.
NOTE: For additional License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12632_na/12632_na.html
452145-B21
Server Management Stand Alone Software Product - ProLiant EssentialsNOTE: Electronic licensing options are available for select ProLiant Essentials software products. Please see the appropriate ProLiant Essentials QuickSpecs for additional information. 
Deploy 
HP ProLiant Essentials Rapid Deployment Pack 
HP ProLiant Essentials Rapid Deployment Pack No Media 1-Server License including 1 year of 24x7 Technical Support and Updates
NOTE: This license allows 1 server to be deployed and managed via RDP. Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service
NOTE: For additional License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11053_na/11053_na.html		452151-B21
HP Server Migration Pack - Universal Edition 
HP Server Migration Pack - Universal Edition, No Media, Physical / Virtual to ProLiant Single Migration License, including 1 year of 24x7 Technical Support and Updates
NOTE: This license allows 1 physical to ProLiant or virtual to ProLiant migration. Customer will receive a printed license entitlement certificate and documentation via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.		460750-B21
HP Server Migration Pack - Universal Edition, No Media, Physical / Virtual to Virtual Single Migration License, including 1 year of 24x7 Technical Support and Updates
NOTE: This license allows 1 physical to virtual or virtual to virtual migration. Customer will receive a printed license entitlement certificate and documentation via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.		460753-B21
HP Server Migration Pack - Universal Edition, No Media, 1-Year Unlimited Migration License, including 1 year of 24x7 Technical Support
NOTE: This license allows unlimited migrations (physical to ProLiant, physical to virtual, virtual to virtual, and virtual to ProLiant) for one year. Customer will receive a printed license entitlement certificate and documentation via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service.		460756-B21
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12855_na/12855_na.html		 
Control 
HP Integrated Lights-Out Select Pack 
HP ProLiant Essentials Integrated Lights-Out Select Pack, No Media, 1-Server License
NOTE: For additional License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12362_na/12362_na.html		452158-B21
HP Integrated Lights-Out Advanced Pack 
HP Integrated Lights-Out Advanced Pack, No Media ,1 Server License
NOTE: For additional License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/10861_na/10861_na.html		452141-B21
Optimize 
HP Accelerated iSCSI Pack 
HP ProLiant Essentials Accelerated iSCSI Pack, No Media, Single License
NOTE: For use with a single NIC port. Contains one license with a unique license activation key and documentation.		452679-B21
NOTE: For additional License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12466_na/12466_na.html 
HP Insight Power Manager (IPM) 
HP Insight Power Manager, No Media, 1-Server License, including 1 year of 24x7 Technical Support and Updates
NOTE: Customers purchasing this upgrade must already have an iLO Advanced or Select license on each managed server. Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.
NOTE: For additional License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12623_na/12623_na.html
452677-B21
HP ProLiant Essentials Virtual Machine Management Pack 
HP ProLiant Essentials Virtual Machine Management Pack, No Media, 1-Server License, including 1 year of 24x7 Technical Support and Updates
NOTE: Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.
NOTE: For additional License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12328_na/12328_na.html		452153-B21
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to: http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials QuickSpecs for more information. 
Processors AMD Opteron™ Processor 2356 (2.3 GHz, 75 Watts) 449774-B21
AMD Opteron™ Processor 2352 (2.1 GHz, 75 Watts)
NOTE: 2300 Series processor quad-core upgrade requires purchase of a VRM kit for second socket (453059-B21) only if second socket not already populated.
449776-B21
AMD Opteron™ Processor 2222 (3.0 GHz, 75 Watts)
451649-B21
AMD Opteron™ Processor 2220 (2.8 GHz, 75 Watts)
438825-B21
AMD Opteron™ Processor 2218 (2.6 GHz, 75 Watts)
407433-B21
AMD Opteron™ Processor 2218 HE (2.6 GHz, 55 Watts)
438824-B21
AMD Opteron™ Processor 2216 (2.4 GHz, 75 Watts)
434945-B21
AMD Opteron™ Processor 2216 HE (2.4 GHz, 55 Watts)
408840-B21
AMD Opteron™ Processor 2214 HE (2.2 GHz, 55 Watts)
407435-B21
AMD Opteron™ Processor 2212 HE (2.0 GHz, 55 Watts)
408837-B21
AMD Opteron™ Processor 2210 (1.8 GHz, 75 Watts) 434947-B21
AMD Opteron™ Processor 2210 HE (1.8 GHz, 55 Watts) 434943-B21
Voltage Regulator Module HP DL385G2/DL585G2 VRM Kit
NOTE: 2300 Series processor quad-core upgrade requires purchase of a VRM kit for second socket only if second processor not already populated.		 453059-B21

Memory

 1 GB REG PC2-5300 2 x 512 MB Single Rank Kit
408850-B21
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit
408851-B21
4 GB REG PC2-5300 2 x 2 GB Dual Rank Kit
408853-B21
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit
408854-B21

Optical Drives

 Slimline CD-RW/DVD-ROM Combo Option Kit
NOTE: Included in performance models.
331903-B21
Slimline DVD-ROM Drive (8x/24x) Option Kit 264007-B21
HP DVD+R/RW 8X Slim 383975-B21
Slimline CD-ROM Drive 24X 356963-B21

Riser Cage Options

 HP 2 Slot PCI-Express x16 & x4 Riser DL385G2 ALL
410571-B21
Mixed Riser Cage Option Kit (PCI-E/PCI-X) 410570-B21
Hard DrivesHot Plug SFF SAS 2.5" Drives
HP 146GB 3G SAS 10K SFF DP HDD
418367-B21
HP 146GB 3G SAS 10K SFF SP HDD
431958-B21
HP 72GB 3G SAS 15K SFF DP HDD
418371-B21
HP 72GB 3G SAS 15K SFF SP HDD
431935-B21
HP 72GB 3G SAS 10K SFF DP HDD
384842-B21
HP 72GB 3G SAS 10K SFF SP HDD
375861-B21
HP 36GB 3G SAS 15K SFF DP HDD
418369-B21
HP 36GB 3G SAS 15K SFF SP HDD
431933-B21
NOTE: Please see the QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html
SATA Hot Plug Entry (ETY) Drives