contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Overview

HP ProLiant DL145 Generation 3 (G3)

Non-Hot Plug SATA Models

 

 

Front View:Rear View:
1.Power Supply1.Low Profile Riser Board Assembly Slot Cover
2.2 AMD Opteron™ 2200 series processors2.Video Port
3.Full-length PCI-Express or HTX slot3.Serial Port
4.Access panel4.PS/2 Mouse Port
5.Low-profile PCI-Express or PCI-X slot5.PS/2 Keyboard Port
6.
Memory banks
6.Lights Out 100 10/100 Mbps LAN Port for IPMI Management (RJ45) (Two)
7.System Fans
8.Front-panel USB ports7.GbE LAN Port for NIC 1 and 2 (RJ45) (Two)
9.Power switch/system status LEDs8.Full-Sized Riser Board Assembly Slot Cover
10.3.5" Hot-plug SAS/SATA or 3.5" Non-hot plug SATA drive9.Power Supply
11.3.5" Hot-plug SAS/SATA or 3.5" Non-hot plug SATA drive 
12.Optional CD- or DVD/CDRW drive
What's New
  • Support for 72 GB, 146 GB and 300 GB Serial-Attached SCSI (SAS) DP Hot Plug Hard Drives
At A Glance
  • Processors:
    • Supports up to two AMD Opteron™ 2200 series processors
    • Supports up to dual-core 2.8GHz, 1MB cache processors
    • Supports DirectConnect Architecture
  • Memory:
    • 8 DIMM slots supporting up to 32GB REG PC2-5300 DDR2-667 MHz memory with Advanced ECC
  • Internal Drive Support:
    • Supports up to two:
      • Hot Plug Serial Attached SCSI (SAS) 3.5"/Serial ATA (SATA) hard drives, or;
      • Non-Hot Plug Serial ATA (SATA) 3.5"hard drives
    • Internal storage capacity of up to 1.5TB (2 x 750GB hot plug 3.5" SATA hard drives), or 600GB (2 x 300GB hot plug 3.5" SAS hard drives)
  • Network Controller:
    • NC326i PCIe Dual Port Gigabit Server Adapter
  • Storage Controllers:
    • HP Embedded SATA Controller on Non-Hot Plug SATA Models
    • HP Smart Array E500/256MB Controller
    • HP Smart Array E200 Controller with 64 MB cache, optional
    • HP 8 Internal Port SAS HBA with RAID 0,1 on Hot Plug SATA/SAS Models
    • HP SC44Ge Host Bus Adapter
    • HP SC11Xe Host Bus Adapter
  • Expansion Slots:
    • Standard - PCI-Express assembly includes:
      • Slot 1: full-length/full height PCI-Express x16
      • Slot 2: half-length/low-profile PCI-Express x4 (x8 connector)
    • Optional - PCI-X assembly includes:
      • Slot 2: half-length/low-profile PCI-X 133 (note: PCI-X slots are 64 bits; 133 MHz capable)
    • Optional - HTX assembly includes: Slot 1: full-length/full height HTX
  • Management:
    • IPMI 2.0 support
    • HP ProLiant Lights Out 100i Remote Management support
    • ROM Setup Utility
  • USB Ports:
    • Four USB ports (two front, two rear)
  • Optical Drive:
    • Support for one (optional): CD-ROM, DVD-ROM, DVD RW, DVD/CD RW
  • Power Supply:
    • 650W Power Supply (Non-Hot Plug, Autoswitching)
  • Form Factor:
    • 1U rack models
  • Deployment/Serviceability:
    • Tool-less access to all system components for easy in rack serviceability
    • Warranty: This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Certain restrictions and exclusions apply. SATA hard drives have a one year warranty.
    • Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day response. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Standard Features

NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA0-8885ENW.pdf
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section.

Processor
One of the following depending on Model		AMD Opteron™ processor Model 2220 (2.8 GHz (95W)
AMD Opteron™ processor Model 2218 (2.6 GHz (95W)
AMD Opteron™ processor Model 2216 (2.4 GHz (95W)
AMD Opteron™ processor Model 2216 HE (2.4 GHz (68W)
AMD Opteron™ processor Model 2214 HE (2.2 GHz (68W)
AMD Opteron™ processor Model 2210 HE (1.8 GHz (68W)
AMD Opteron™ processor Model 2210 (1.8 GHz (95W)
Upgradeability Upgradeable to two processors
Chipset ServerWorks HT2100 and HT1000
Cache Memory 1MB Level 2 cache per core
Memory Protection Memory mirroring with Advanced ECC capabilities
Memory
One of the following depending on Model 		Type REG PC2-5300 DIMMs (DDR2-667)
Standard
(Depending on model)
 1 GB
2 GB
4 GB		 (2 x 512 MB)
(2 x 1 GB)
(2 x 2 GB)
Maximum 32 GB (8 x 4 GB)
Network Controller NC326i PCIe Dual Port Gigabit Server Adapter
Expansion Slots
Slot Number
Bus Speed
Bus Number*
Device Number**
 Hot Plug
(Y/N)
PCI Voltage
Notes
1
x16 PCI-Express
3
0
 No
3.3 volts
Full length, full height
1
HTX
9
1
 No
3.3 volts
Full length, full height
2
x4 PCI-Express
6
0
 No
3.3 volts
Low Profile
2
4-bit, 133MHz PCI-X
2
1
 No
3.3 volts
Low Profile
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus).
Storage Controller Non-Hot Plug SATA Models HP Embedded SATA Controller
Hot Plug SATA/SAS Models HP 8 Internal Port SAS HBA with RAID 0,1
NOTE: A diskette drive is needed to install storage controller drivers during a Windows operating system installation from CD.
Storage Optical Drives:  
DVD-ROM 8x IDE (ATAPI) DVD-ROM drive, slim (optional)
DVD/CD RW 24x IDE (ATAPI) CD-ROM drive (optional)
Diskette Drives Via USB only
Drive Bays:  
Non-Hot Plug SATA Up to 2 non-hot plug SATA 3.5" drives
Hot-Plug SATA/SAS Up to 2 hot plug SATA /SAS 3.5" drives
Maximum Internal Storage
 Non-Hot Plug SATA 1TB 2 x 500GB
Hot Plug SATA 1.5TB 2 x 750GB
Hot Plug SAS 600GB 2 x 300GB
Non-Hot Plug SAS 600GB 2 x 300GB
Interfaces Parallel None
Network RJ-45(Ethernet) NC326i PCIe Dual Port Gigabit Server Adapter
Serial 1
Pointing Device (Mouse) 1
Graphics 1
Keyboard

1
USB 4 (two front; two rear)
NOTE: Please see the following URL for additional information regarding USB support:
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html.
Graphics
  • 32MB shared graphics memory
    • 1600x1200x16M maximum resolution
Form Factor Rack Mount (1U), (1.75 in/4.45 cm)
Server Management Stand Alone Software Product and ProLiant Essentials HP Systems Insight Manager HP Systems Insight Manager (HP SIM) provides a unified, secure and extensible standards-based environment to centrally manage servers, storage and other infrastructure devices, (both HP and non-HP) across multiple operating system platforms.
ProLiant Essentials Rapid Deployment Pack Rapid Deployment Pack (RDP) extends HP Systems Insight Manager with a complete deployment solution for HP ProLiant servers. RDP provides a central location to configure server hardware, deploy Windows, Linux and VMware ESX operating environments and install HP ProLiant Support Pack drivers using images and scripted profiles. For more information, visit: http://www.hp.com/go/rdp
  NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to: http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
HP Lights-Out 100i Remote Management HP Lights-Out 100i Remote Management delivers affordable, entry level remote management capabilities for HP ProLiant 100 Series servers with embedded LO100i. It allows customers or their service providers to remotely manage ProLiant 100 Series servers remotely over a LAN or the Internet and consists of the following:
  • LO100i Standard is embedded remote management and provides basic remote control via telnet, browser, and IPMI 2.0 and SMASH
  • LO100i Select Pack License are upgrades for essential, secure, remote control, serial console and virtual media
  • LO100i Advanced Pack License are upgrades for all the features of LO100i Select plus Virtual KVM (graphical hardware-based, remote console)
Core Infrastructure ManagementSubscriber's ChoiceSubscriber's Choice Driver and Support Alerts/Notifications is a web-based email subscription service that provides software and driver change notifications for ProLiant products. Sign up at: http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis.
ROMPaq software and latest drivers The latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options, available through ProLiant Support Packs or downloaded from software and drivers download pages website at: http://www.hp.com/go/support.
Industry Standard Compliance ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0 Compliant
Manageability HP ProLiant Lights Out 100i Remote Management standard
Security Power-on password
Setup password
UPS and PDU Power
Cord Matrix
 Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications for UPS and PDU units:
http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/index.html.
Power Supply 650 Watts, auto-switching, PFC (Power Factor Correcting)
System Fans 3 system fans ship standard; Non-hot plug, Non-redundant
OS SupportMicrosoft Windows 2003 and Microsoft Windows 2003/R2 Standard Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 Enterprise Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 Web Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 for Extended Systems Standard Edition (64-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 for Extended Systems Enterprise Edition (64-bit)
Microsoft Windows Server 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
NOTE: For more complete and up-to-date information of all supported OSes for ProLiants, certification information and how to buy server operating systems from HP please visit the OS product site at: http://h18004.www1.hp.com/products/servers/software/OEM.html
NOTE: For an up-to-date listing of the latest software and drivers available for your server, please select your server: http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?lang=en&cc=us&taskId=135
&prodTypeId=15351&prodCatId=241435..
Rack Airflow RequirementsRack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 7 cm (2.75 inches)

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server, or to the server documentation located in the Support section at the following URL: http://h18000.www.hp.com/products/servers/proliantDL145/index.html
Telco Rack Support Telco Rack Kit:
Support for all 2-post Telco racks requires the use of the standard rack kit and an additional option kit from Rack Solutions.
http://www.racksolutions.com/hp
HP Factory Express Capability HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise Configurator

The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.
Service and Support

HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service - Simplify ProLiant solution implementation, maintenance and management.

  • Support Service -3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
  • Deployment Service - Hardware Installation only

Enhanced Service - Optimize service level to increase IT performance and availability

  • Support Service - 3 Year 13x5 Same Business Day, 4-Hour response coverage
  • Deployment Service - Installation and Start-up only

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

HPC Interconnects
NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL145 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to configure HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects: http://www.hp.com/techservers/clusters/ucp/index.html
HPC Interconnects InfiniBand PCI-X and PCI-Express adapters
Gigabit Ethernet Use embedded ports
Myrinet XP PCI-X Rev D, Rev E and Rev F adapters
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Models
Non Hot Plug Serial ATA (SATA) Models
HP DL145G3 2218 2.6 GHz 2 GB (1P)
411596-001

HP DL145G3 2214 HE 2.2 GHz 2 GB (1P)
411593-001

HP DL145G3 2210 HE 1.8 GHz 1 GB (1P)
411592-001

Processor(s)
One of the following depending on model
(1) AMD Opteron™ processor Model 2218 (2.6 GHz (95W)
(1) AMD Opteron processor Model 2214 HE (2.2 GHz (68W)
(1) AMD Opteron processor Model 2210 HE (1.8 GHz (68W)
Cache Memory1 MB Level 2 cache per core
Memory
One of the following depending on model 		1 GB (2 x 512 MB) Registered PC2-5300 DDR2 DIMMs (667 MHz) with Advanced ECC capabilities
2 GB (2 x 1 GB) Registered PC2-5300 DDR2 DIMMs (667 MHz) with Advanced ECC capabilities
Network ControllerNC326i PCIe Dual Port Gigabit Server Adapter
Storage ControllerHP Embedded SATA Controller
Hard Drive80 GB NHP SATA HDD
Internal Storage1TB maximum (2 x 500 GB Non-Hot plug 3.5" SATA hard drives)
Optical DriveOptional CD/DVD-ROM, DVD/CD RW
Form FactorRack Mount (1U)
Hot Plug Serial ATA (SATA)/Serial Attached SCSI (SAS) Models

HP DL145G3 2220 2.8 GHz 4 GB (1P)
440719-001

HP DL145G3 2218 2.6 GHz 4 GB (1P)
411599-001

HP DL145G3 2214 HE 2.2 GHz 2 GB (1P)
411597-001

Processor(s)
One of the following depending on model		(1) AMD Opteron™ processor Model 2220 (2.8 GHz (95W)
(1) AMD Opteron processor Model 2218 (2.6 GHz (95W)
(1) AMD Opteron processor Model 2214 HE (2.2 GHz (68W)
Cache Memory1 MB Level 2 cache per core
Memory
One of the following depending on model 		2 GB (2 x 1 GB) PC2-5300 DDR2 DIMMs (667 MHz) with Advanced ECC capabilities
4 GB (2 x 2 GB) PC2-5300 DDR2 DIMMs (667 MHz) with Advanced ECC capabilities
Network ControllerNC326i PCIe Dual Port Gigabit Server Adapter
Storage ControllerHP 8 Internal Port SAS HBA with RAID
Hard DriveNone ship standard (up to 2 Hot Plug SATA or SAS drives supported)
Internal Storage1.5TB max. (2 x 750 GB Hot Plug 3.5" SATA hard drives)
or 600 GB (2 x 300 GB Hot Plug 3.5" SAS hard drives)
Optical DriveOptional CD/DVD-ROM, DVD/CD RW
Form FactorRack Mount (1U)
AvailabilityHot Plug Hard Drives
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information. Contact your local sales representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is a Factory Installable Option.

 
Step 1: Base Configuration
 Non-Hot Plug Model 
HP ProLiant DL145 G3 Non- Hot Plug SATA Rack Chassis
411588-B21
Factory Integrated Model ships with:
NC326i PCIe Dual Port Gigabit Server Adapter
Two available PCI-Express slots, including one full-length/full height and one low-profile/half height slot
HP Embedded SATA Controller
650 Watt Power Supply
  
3 Non-Hot Plug Blowers 
Rack (1U), (1.75 in / 4.45 cm) 
Hot Plug Model
HP ProLiant DL145 G3 Hot Plug SATA/SAS Rack Chassis
411590-B21
Factory Integrated Model ships with:
NC326i PCIe Dual Port Gigabit Server Adapter
One available PCI-Express slot, (full-length/full height), the low-profile/half height slot houses the SATA/SAS storage controller
One HP 8 Internal Port SAS Host Bus Adapter with RAID
One HP SATA/SAS Host Cable Kit
One Hot Plug Backplane Option Kit
650 Watt Power Supply 
  
3 Non-Hot Plug Blowers 
Rack (1U), (1.75 in / 4.45 cm) 
Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)
Base ProcessorsAMD Opteron™ processor Model 2220 (2.8 GHz (95W)
NOTE: If 2 processors are desired, select one 440721-L21 and one 440721-B21.
440721-L21
AMD Opteron™ processor Model 2218 - 2.6 GHz (95W)
NOTE: If 2 processors are desired, select one 411606-L21 and one 411606-B21.
411606-L21
AMD Opteron™ processor Model 2216 - 2.4 GHz (95W)
NOTE: If 2 processors are desired, select one 435014-L21 and one 435014-B21.
435014-L21
AMD Opteron™ processor Model 2216 HE - 2.4 GHz (68W)
NOTE: If 2 processors are desired, select one 411616-L21 and one 411616-B21.
411616-L21
AMD Opteron™ processor Model 2214 HE - 2.2 GHz (68W)
NOTE: If 2 processors are desired, select one 411605-L21 and one 411605-B21.
411605-L21
AMD Opteron™ processor Model 2212 - 1.8 GHz (95W)
NOTE: If 2 processors are desired, select one 411615-L21 and one 411615-B21.
411615-L21
AMD Opteron™ processor Model 2210 HE - 1.8 GHz (68W)
NOTE: If 2 processors are desired, select one 411604-L21 and one 4116045-B21.
411604-L21
Base Memory1 GB PC2-5300 DDR2 (2 x 512 MB) Kit, single rank
408850-B21
2 GB PC2-5300 DDR2 (2 x 1 GB) Kit, single rank
408851-B21
4 GB PC2-5300 DDR2 (2 x 2 GB) Kit, dual rank
408853-B21
8 GB REG PC2-5300 (2 x 4 GB) Kit, dual rank
408854-B21
Hard Drives Serial-ATA (SATA) Non-Hot Plug Hard Drives (Non-Hot Plug Models Only)  
HP 80GB 1.5G SATA 7.2K NHP 3.5" HDD
383410-B21

HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD
411275-B21
HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD
411276-B21
HP 500GB 1.5G SATA 7.2K NHP 3.5" HDD, FIO*
404469-B21
*Factory Integrated Only  
Serial-ATA (SATA) Hot Plug Hard Drives (SATA/SAS Hot Plug Models Only)  
HP 80GB SATA 7.2K Hot Plug 3.5" HDD
349237-B21
HP 160GB SATA 7.2K Hot Plug 3.5" HDD
349238-B21
HP 250GB SATA 7.2K Hot Plug 3.5" HDD
349239-B21
HP 500GB SATA 7.2K Hot Plug 3.5" HDD
395473-B21
HP 750GB SATA 7.2K Hot Plug 3.5" HDD
432341-B21
Serial-Attached SCSI (SAS) Hot Plug Hard Drives (SATA/SAS Hot Plug Models Only)  
HP 72GB 3G SAS 15K 3.5" DP HDD
384852-B21
HP 72GB SAS 15K Hot Plug 3.5" SP HDD
375870-B21
HP 146GB 3G SAS 15K 3.5" DP HDD
384854-B21
HP 146GB SAS 15K Hot Plug 3.5" SP HDD
375872-B21
HP 300GB 3G SAS 15K 3.5" DP HDD
416127-B21
HP 300GB SAS 15K Hot Plug 3.5 SP HDD
431944-B21
NOTE: The purchase of SAS HBA or array controller is required.  
Storage Controller HP SC44Ge Host Bus Adapter
416096-B21
HP 8 Internal Port SAS HBA with RAID
NOTE: For use with Hot Plug SATA/SAS models only
NOTE: The selection of the HP 8 Internal Port SAS HBA with RAID requires the purchase of the PCI-X Riser Option kit (P/N 411625-B21)
347786-B21
HP SATA/SAS Host Cable Kit
NOTE: For use with Hot Plug SATA/SAS models only
389650-B21
HP Smart Array E500/256MB Controller
NOTE: Selection of the E500 with the E200 will prevent installation of the E500 battery-backed write cache module.
435129-B21
HP Smart Array E200/128 BBWC Controller
NOTE: Selection of the E500 with the E200 will prevent installation of the E500 battery-backed write cache module.
411508-B21
HP HTX Riser Board Kit
411627-B21
HP PCI-X Riser Board Kit
411625-B21
Hot Plug Backplane Option Kit
411623-B21
HP Single Channel U320 SCSI Controller
NOTE: The selection of the 64-Bit/133-MHz Single Channel Ultra 320 SCSI HBA G2 requires the purchase of the PCI-X Riser Option kit (P/N 411625-B21)
374654-B21
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Options" section below. Some options may not be available for factory integration. Please contact an HP sales representative for additional information.
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Options
Server Management Stand Alone Software Product – ProLiant Essentials
 NOTE: Electronic licensing options are available for Insight Control suites and select ProLiant Essentials software products. Please see the appropriate Insight Control and ProLiant Essentials QuickSpecs for additional information.  
Deploy  
ProLiant Essentials Rapid Deployment Pack  
ProLiant Essentials Rapid Deployment Pack No Media 1-Server License including 1 year of 24x7 Technical Support and Updates
NOTE: This license allows 1 server to be deployed and managed via RDP
452151-B21
NOTE: For additional ProLiant Essentials Rapid Deployment Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11053_na/11053_na.html  
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to: http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials.		  
Control  
Integrated Lights-Out 100i Select Pack and Advanced Pack  
HP Lights Out 100i Select Pack 1-Server License
413111-B21
HP Lights Out 100i Advanced Pack 1-Server License
413115-B21
NOTE: For additional ProLiant Integrated Light-Out Select Pack and Advanced Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12087_na/12087_na.html  
ProcessorAMD Opteron™ processor Model 2220 (2.8 GHz (95W)
440721-B21
AMD Opteron™ processor Model 2218 - 2.6 GHz (95W)
411606-B21
AMD Opteron™ processor Model 2216 - 2.4 GHz (95W)
435014-B21
AMD Opteron™ processor Model 2216 HE - 2.4 GHz (68W)
411616-B21
AMD Opteron™ processor Model 2214 HE - 2.2 GHz (68W)
411605-B21
AMD Opteron™ processor Model 2210 - 1.8 GHz (95W)
411615-B21
AMD Opteron™ processor Model 2210 HE - 1.8 GHz (68W)
411604-B21

Memory (DIMMs)

 1 GB REG PC2-5300 2 x 512 MB Single Rank Kit 408850-B21
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit 408851-B21
4 GB REG PC2-5300 2 x 2 GB Dual Rank Kit 408853-B21
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit 408854-B21
Hard DrivesSerial-ATA (SATA) Non-Hot Plug Hard Drives (Non-Hot Plug Models Only)
HP 80GB 1.5 G SATA 7.2K NHP 3.5" HDD
383410-B21
HP 160GB 1.5 G SATA 7.2K NHP 3.5" HDD
411275-B21
HP 250GB 1.5 G SATA 7.2K NHP 3.5" HDD411276-B21
NOTE: When purchasing systems with the 500 GB Non-Hot Plug SATA drives, please reference the Configuration Information Section of this QuickSpecs to order via Configuration to Order. 
Serial-ATA (SATA) Hot Plug Hard Drives (SATA/SAS Hot Plug Models Only)
HP 80 GB SATA 7.2K Hot Plug 3.5" HDD349237-B21
HP 160 GB SATA 7.2K Hot Plug 3.5" HDD349238-B21
HP 250 GB SATA 7.2K Hot Plug 3.5" HDD349239-B21
HP 500 GB SATA 7.2K Hot Plug 3.5" HDD395473-B21
HP 750 GB SATA 7.2K Hot Plug 3.5" HDD432341-B21
Serial-Attached SCSI (SAS) Hot Plug Hard Drives (SATA/SAS Hot Plug Models Only)
HP 72 GB 3G SAS 15K 3.5" DP HDD384852-B21
HP 72 GB SAS 15K Hot Plug 3.5" SP HDD375870-B21
HP 146 GB 3G SAS 15K 3.5" DP HDD384854-B21
HP 146 GB SAS 15K Hot Plug 3.5" SP HDD375872-B21
HP 300 GB 3G SAS 15K 3.5" DP HDD416127-B21
HP 300 GB SAS 15K Hot Plug 3.5 SP HDD431944-B21
NOTE: The purchase of SAS HBA or array controller is required. 
Graphic Cards NVIDIA Quadro FX3500 256MB PCIe
435681-B21
NVIDIA Quadro FX1500 256MB PCIe
435703-B21
NOTE: At this time, these graphic cards are supported on Linux and Windows.
Optical Drives DVD-ROM Drive (optional)
432878-B21
DVD/CD RW Drive (optional)
432880-B21
Multibay II DVD/CD-RW Combo Drive
NOTE: When purchasing the Multibay II DVD/CD-RW Combo Drive, (P/N PA850A), the USB 2.0 Multibay II Cradle (P/N PA509A) is required.
PA850A
USB 2.0 MultiBay II Cradle, External
NOTE: When purchasing the Multibay II DVD/CD-RW Combo Drive, (P/N 850A), the USB 2.0 Multibay II Cradle, (P/N PA509A) is required.
PA509A
Storage Controllers HP SC44Ge Host Bus Adapter
416096-B21
HP SC11Xe Host Bus Adapter
412911-B21
HP 8 Internal Port SAS HBA with RAID
NOTE: For use with Hot Plug SATA/SAS models only
NOTE: The selection of the HP 8 Internal Port SAS HBA with RAID requires the purchase of the PCI-X Riser Option kit (P/N 411625-B21).
347786-B21
HP SATA/SAS Host Cable Kit
NOTE: For use with Hot Plug SATA/SAS models only.
389650-B21
HP Smart Array E500/256MB Controller
NOTE: Selection of the E500 with the E200 will prevent installation of the E500 battery-backed write cache module.
435129-B21
HP Smart Array E200/128 BBWC Controller
NOTE: Selection of the E500 with the E200 will prevent installation of the E500 battery-backed write cache module.
411508-B21
HP HTX Riser Board Kit 411627-B21
HP PCI-X Riser Board Kit 411625-B21
Hot Plug Backplane Option Kit 411623-B21
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
NOTE: The selection of the 64-Bit/133-MHz Single Channel Ultra 320 SCSI HBA G2 requires the purchase of the PCI-X Riser Option kit (P/N 411625-B21)		 374654-B21
CommunicationsHP NC110T PCI Express Gigabit Server Adapter
NOTE: Does not support Windows 2000.		434905-B21
HP NC360T PCI Express Dual Port Gigabit Server Adapter412648-B21
HP NC364T PCI Express Quad Port Gigabit Server Adapter
NOTE: Does not support Windows 2000.		435508-B21
HP NC373F PCI Express Multifunction Gigabit Server Adapter394793-B21
HP NC373T PCI Express Multifunction Gigabit Server Adapter 394791-B21
HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter
NOTE: Supported on a Full Length-Full Height slot only.		 394795-B21
HP NC510C PCIe 10 Gigabit Server Adapter
NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510C adapter.		414129-B21
HP NC510F PCIe 10 Gigabit Server Adapter
NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510F adapter.		414126-B21
HPC Specific Options InfiniBand 4X PCI-E Dual Port Host Adapter 380298-B21
HP IB 4X DDR PCI-e Dual Port 0 Memory HCA 483513-B21
HP IB 4X DDR PCI-e Dual Port HCA 448397-B21
HP IB 4X DDR PCI-e Dual Port HCA 409376-B21
Myrinet PCI 2XP Rev-E 4MB Network Interface Card 373983-B21
Myrinet 2XP PCI-X, Fiber F-Series, 2MB NIC 390456-B21
NOTE: For HPC interconnect adapters please see the HPC Interconnect section of this QuickSpecs.  
Rack Kits 1U Cable Management Arm
NOTE: Package contains two cable management arms.		 365403-B21
Tape DrivesUSB Tape Drives 
HP StorageWorks 1U USB Rack-Mount Kit with one DAT 72 USB Tape DriveAG594A
HP StorageWorks 1U USB Rack-Mount Kit with one DAT 160 USB Tape DriveAG703A
Ultrium External Tape Drives 
HP StorageWorks LTO-1 Ultrium 232 Internal Tape Drive (Carbonite)
NOTE: HP recommends combining this tape drive with the 1U SCSI Rack-Mount kit (A7445B) for a complete rack-mount solution.		DW064A
Rack-Mount Tape Drive 
HP StorageWorks 1U SCSI Rack-Mount kit
NOTE: The 1U Rack-Mount Kit can support up to (2) half-height tape drives and is compatible with multiple Single-Ended and LVD SCSI tape drives including the DAT 40, DAT 72, DAT 160, DLT VS160, LTO-1 Ultrium 232, LTO-2 Ultrium 448 and LTO-3 Ultrium 920 tape drives.		A7445B
HP StorageWorks 1U USB Rack-Mount Kit
NOTE: The 1U USB Rack-Mount Kit can support up to (2) half-height tape drives and is compatible with the DAT 40 USB, DAT 72 USB and DAT 160 USB tape drives.		A8007A
NOTE: When attaching to an external tape drive, autoloader or library, you must also purchase a HBA
NOTE: For a complete listing of HP tape drive offerings supported with the DL145 G3, visit http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html		 
HP D2D Backup SystemHP StorageWorks D2D110 Backup System
NOTE: 1TB of Disk Storage
EH880A
HP StorageWorks D2D110 Backup System with Data Protector Express Software Kit
NOTE: 1TB of Disk Storage
EH923A
HP StorageWorks D2D120 Backup System
NOTE: 2TB of Disk Storage
EH884A
HP StorageWorks D2D120 Backup System with Data Protector Express Software Kit
NOTE: 2TB of Disk Storage
EH924A

HP StorageWorks D2D130 Backup System
NOTE: 3TB of Disk Storage.
EH950A

HP StorageWorks D2D130 Backup System with Data Protector Express Software Kit
NOTE: 3TB of Disk Storage.
EH951A

HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive
NOTE: 3TB of Disk Storage.
EH952A
NOTE: Please see the HP D2D Backup Systems QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/12651_na/12651_na.html
StorageWorks Options StorageWorks Fibre Channel HBA
NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed compatibility information please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.html
HP StorageWorks 81Q PCI-e FC HBA
AK344A
HP StorageWorks FC2214DC 2 Gb, Dual Port, 64-Bit/133 MHz PCI-X HBA
321835-B21
HHP StorageWorks 2 Gb, Single Channel, 133 MHz PCI-X HB
A7388A
HP StorageWorks 2 Gb, Dual Channel, 133 MHz PCI-X HBA
A7387A
HP StorageWorks FC2142SR 4Gb PCI-e HBA
A8002A
HP StorageWorks FC2242SR Dual Channel 4 Gb PCI-e HBA
A8003A
HP StorageWorks FC1142SR 4Gb PCI-e HBA
AE311A
HP StorageWorks FC1242SR Dual Channel 4 Gb PCI-e HBA
AE312A
HP StorageWorks FC2143 4Gb PCI-X 2.0 - to Fibre Channel HBA
AD167A
HP StorageWorks FC2243 Dual Channel 4Gb PCI-X 2.0 HBA
AD168A
StorageWorks SCSI HBA
HP U320e SCSI Host Bus Adapter
AH627A
NOTE: Recommended Dual Channel Ultra320 SCSI Controller for connecting multi-drive MSL tape libraries to ProLiant servers.
StorageWorks Connection Kit  
HP StorageWorks 8Gb Simple SAN Connection Kit AK241A
StorageWorks Fibre Channel Switch  
HP StorageWorks 8/20q Fibre Channel Switch AK242A
USB Options HP 1GB USB 2.0 Floppy Drive Key
442085-B21
HP 256MB USB 2.0 Floppy Drive Key
442084-B21
HP USB-P/S2 Mouse
DC369A
HP Keyboard (USB) standard 2004
DT528A#
USB 1.44-MB External Diskette Drive
DC361B
HP KVM Switch OptionsHP 1x4 Console SwitchAF611A
HP PS2 Server Console Cable, 6 foot, 2-Pack AF612A
HP USB Server Console Cable, 6 foot, 2-Pack
NOTE: required for supporting USB peripheral		AF613A
NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm 
HP Serial Console Server OptionsHP 16 Port Serial Console Server (worldwide)AF101A
HP 48 Port Serial Console Server (worldwide)AF102A
Serial Adapter, RJ45-D89 DCE Female, 1-packAF103A
Serial Adapter, RJ45-D89 DCE Female, 8-packAF110A
NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches. Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm 
NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm 
2x1x16 IP Console Switch with Virtual MediaAF601A
4x1x16 IP Console Switch with Virtual MediaAF602A
2x16 Server Console Switch with Virtual MediaAF600A
PS/2 Virtual Media Interface Adapter, 1 pack
NOTE: Requires PS/2 and one USB port on server.		AF604A
Service and Support Offerings (HP Care Pack Services) Hardware Services 4-Hour On-site Service
13-Hour x 5-Day Coverage, 3 Years, Electronic
U9509E
Hardware Services Next Business Day On-Site Service
9-Hour x 5-Day Coverage, 3 Years, Electronic
U9508E
Hardware Services 6-Hour Call to Repair On-Site Service
Hardware Installation, Electronic
U9520E
NOTE: For more information, customer/resellers can contact http://www.hp.com/services/carepack
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Memory
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
HP ProLiant DL145 G3 (all models)
Standard Memory
1 GB (2 x 512 MB) PC2-5300 DIMM memory, with Advanced ECC Capabilities memory installed.
2 GB (2 x 1 GB) PC2-5300 DIMM memory, with Advanced ECC Capabilities memory installed.
4 GB (2 x 2GB) PC2-5300 DIMM memory, with Advanced ECC Capabilities memory installed.

Maximum Memory
Up to 32GB memory is available with the optional installation of PC2-5300 Registered DIMM memory kits.
Memory should be installed in pairs and matched for optimum performance.
 
NOTE: Chart does not represent all possible memory configurations.
Memory
Slot
 
1
2
3
4
5
6
7
8
Standard (1 GB)
512 MB
512 MB
Empty
Empty
Empty
Empty
Empty
Empty
Standard (2 GB)
1 GB
1 GB
Empty
Empty
Empty
Empty
Empty
Empty
Standard (4 GB)
2 GB
2 GB
Empty
Empty
Empty
Empty
Empty
Empty
Maximum (32 GB)
4 GB
4 GB
4 GB
4 GB
4 GB
4 GB
4 GB
4 GB
  

Following are memory options available from HP:

 
1 GB REG PC2-5300 2 x 512 MB Single Rank Kit 408850-B21
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit 408851-B21
4 GB REG PC2-5300 2 x 2 GB Dual Rank Kit 408853-B21
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit 408854-B21
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Storage

1,2 Two Non-hot plug SATA or Two 3.5" Hot Plug SATA/SAS Hard Drive Bays
A Optional CD-ROM, DVD-ROM, DVD/CD RW

Drive Support

Removable Media   
 

Quantity
Supported

Position
Supported


Controller

DVD-ROM

Up to 1

3

Integrated IDE (ATAPI) (optional)

DVD/CD RW

Up to 1

3

Integrated IDE (ATAPI) (optional)

Hard Drives

SATA - Non-Hot Plug
 

Quantity
Supported

Position
Supported


Controller

3.5-inch
 
80 GB 7,200 rpm

Up to 2

1;2

HP Embedded SATA Controller

160 GB 7,200 rpm
Up to 2
1;2
HP Embedded SATA Controller
250 GB 7,200 rpm
Up to 2
1;2
HP Embedded SATA Controller
500 GB 7,200 rpm
Up to 2
1;2
HP Embedded SATA Controller
SATA/SAS Hot Plug
 

Quantity
Supported

Position
Supported


Controller

3.5-inch
80 GB SATA 7,200 rpm
160 GB SATA 7,200 rpm
250 GB SATA 7,200 rpm
500 GB SATA 7,200 rpm
750 GB SATA 7,200 rpm
Up to 2
1;2
HP 8 Internal Port SAS HBA with RAID
SAS Hot Plug
72 GB SAS 15,000 rpm
146 GB SAS 15,000 rpm
300 GB SAS 15,000 rpm
Up to 2
1;2
HP 8 Internal Port SAS HBA with RAID
Tape Drives and D2D Backup

NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following:
http://h18000.www1.hp.com/products/quickspecs/north_america/10233.html

NOTE: For complete listing of tape drive offerings see http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
For recommended tape drive offerings for this ProLiant server see the following:

For supported tape drive offerings for this ProLiant server see the following:
 
Position
Supported
Controller
Controller/HBA Option Kit Part Number
HP StorageWorks USB Tape, External
DAT 72 USB
DAT 160 USB
1U USB Rack-Mount Kit
External
USB 2.0 Port

N/A