• Support for NC382T PCIe Dual Port Multifunction Gigabit Server Adapter

The new HP ProLiant DL185 G5 is a 2U, dual processor server designed for quality, performance, and flexible deployments to meet the needs of the emerging markets, SMB market, and Corporate scale out.

• Processors:
• Supports up to two Quad-Core AMD Opteron™ 2300 sequence processors
• Supports up to two Dual-Core AMD Opteron™ 2200 sequence processors
• Dual-core AMD Opteron™ processors 2200 sequence with 2MB Level 2 cache
• Memory:
• Supports up to 32 GB PC2-5300 DIMMs (DDR2-667) with Advanced ECC
• Internal Drive Support:
• Internal storage capacity (up to 14 hard drives via CTO or up to 12 hard drives via BTO)
• 8 hard drive model:
  • SATA Capacity: Supports up to 8.0TB (8 x 1TB)
  • SAS Capacity: Supports up to 8.0TB (8 x 1TB)
• 12 hard drive model:
  • SATA Capacity: Supports up to 12.0 TB (12 x 1 TB)
  • SAS Capacity: Support 12.0 TB (12 x 300 GB)
• Optional 14 drive support available with Rear 2 Hard Drive Kit
  NOTE: Available via CTO only
• SATA Capacity: 14.0 TB (14 x 1 TB)
• SAS Capacity: 14.0 TB (14x 1 TB)
• Network Controller:
• NC326i PCIe Dual Port Gigabit Server Adapter (embedded)
• Storage Controllers:
• HP Smart Array E200/128 BBWC Controller
• HP Smart Array P400/256MB Controller
• HP Smart Array P800 Controller (optional)
• HP SC11Xe Host Bus Adapter (optional)
• HP SC44Ge Host Bus Adapter (optional)
• Expansion Slots:
• Standard Riser: (1) x4 PCI-E (LP), (2) x8 PCI-E (FL/FH)
• Option 1: (1) x4 PCI-E (LP), (2) 100MHz PCI-X 64-bit
• Option 2: Rear DVD optional riser, (2) x8 PCI-e FL/FH slots (12HDD model only, replaces LP PCI-e slot)
• Option 3: (1)x4 PCI-E (LP), Rear dual HDDs (12HDD model only, replaces all FL/FH PCI-e slots)
• Management:
• HP ProLiant Lights Out 100i Remote Management support (IPMI 2.0 and SMASH support
• Virtual Media support with LO100i Select license
• Virtual Media plus Virtual KVM support with LO100i Advanced license
• USB Ports:
• Five USB ports (2) up front, (2) rear, (1) internal (optional)
• Optical Drive:
• Support for one (optional): Multi-bay DVD
• Optional Floppy (USB only, USB key)
• Power Supply:
• 750W Power Supply (Hot Plug, Autoswitching) ships standard
• High Efficiency 1200W Power Supply (Redundant Hot Plug, Autoswitching) (Optional) CSCI 2007/2008
• NOTE: Climate Savers Computing Initiative, 2007-2008 Listed Compliant)
• Form Factor:
• Rack (2U), (3.5 in/8.89 cm)
• Deployment/Serviceability:
• Tooled access to all system components for easy in rack serviceability
• Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
• Warranty:
  • This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives have a one year warranty. SAS Enterprise drives have a three-year warranty.
  • NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.

Memory
One of the following depending on Model

32 MB shared supporting 1600x1200x16M resolution

HP Lights-Out 100i Remote Management delivers affordable, entry level remote management capabilities for HP ProLiant 100 Series servers with embedded LO100i. It allows customers or their service providers to remotely manage ProLiant 100 Series servers remotely over a LAN or the Internet and consists of the following:

• LO100i Standard is embedded remote management and provides basic remote control via  telnet, browser, and IPMI 2.0 and SMASH
• LO100i Select Pack License are upgrades for essential, secure, remote control, serial console and virtual media
• LO100i Advanced Pack License are upgrades for all the features of LO100i Select plus Virtual KVM (graphical hardware-based, remote console)

NOTE: Flexible and volume quantity (AKA) license kits are available for both the Lights-Out 100i Select and Lights-Out 100 Advanced Pack licenses as well as Electronic License To Use (E-LTU). AKA Tracking licenses require a 100 unit minimum forecast at initial contract signing. For these additional part numbers, please refer to each software products' QuickSpecs at this link for more information: http://h18004.www1.hp.com/products/servers/management/
remotemgmt.html

Rapid Deployment Pack (RDP) extends HP Systems Insight Manager with a complete deployment solution for select HP ProLiant 100 series servers. RDP provides a central location to configure server hardware, deploy Windows, Linux and VMware ESX operating environments and install HP ProLiant Support Pack drivers using images and scripted profiles. For more information, visit: http://www.hp.com/go/rdp.

NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to: http://www.hp.com/go/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information.

Embedded HP ProLiant Lights Out 100i Remote Management with upgrades to LO100i Advanced and LO100i Select

One Highline IEC Power cord ships standard (for connection to a Power Distribution Unit)
NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords that allow connection to 110V wall outlets in a home or office. HP ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord If a user wishes to power a ProLiant DL server using a110V receptacle (NEMA-15), the NEMA power cord (AF556A) must be ordered separately.

If a local power cord is required, please reference the following power cord matrix: http://www.hp.com/go/powercordmatrix.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm).

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

HP ProLiant DL185 G5 servers have fixed rails which provide support for round or square mounting holes, including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 26" - 36".

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.

The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.

HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service – Simplify ProLiant solution implementation, maintenance and management.

• Support Service – 3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
• Deployment Service – Hardware Installation only

Enhanced Service – Optimize service level to increase IT performance and availability

• Support Service – 3 Year 13x5 Same Business Day, 4-Hour response coverage
• Deployment Service – Installation and Start-up only

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

For a complete listing of service offerings and information visit: http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack

8 Hard Drive Models

HP DL185 G5 2356, 4GB (1P), 8LFF
461335-001

HP DL185 G5 2352, 2GB (1P), 8LFF
461336-001

HP DL185 G5 2346HE, 2GB (1P) 8LFF
463967-001

HP DL185 G5 2218, 1GB (1P) 8LFF
442816-001

(1)Quad-Core AMD Opteron™ processor Model 2356 (2.3 GHz, 75W)
(1) Quad-Core AMD Opteron™ processor Model 2352 (2.1 GHz, 75W)
(1) Quad-Core AMD Opteron™ processor Model 2346HE (1.8 GHz, 55W)
(1) Dual-Core AMD Opteron™ processor Model 2218 (2.6 GHz , 95W)

Memory
One of the following depending on model

8TB maximum

12 Hard Drive Models

HP DL185 G5 2352, 4GB (1P), 12LFF
461338-001

(1) Quad-Core AMD Opteron™ processor Model 2352 (2.2 GHz, 75W)

12TB maximum

S-Buy DL185G5 2354
470064-764

(1) Quad Core AMD Opteron™ Processor 2354 (2.2 GHz, 75W ACP)

Memory

8TB Maximum

S-Buy DL185G5 2354 2P
470064-765

(2) Quad Core AMD Opteron™ Processor 2354 (2.2 GHz, 75W ACP)

Memory

8TB Maximum

AMD Opteron™ processor Model 2354 (2.2 GHz, 75W ACP), FIO Kit

AMD Opteron™ processor Model 2352 (2.1 GHz, 75W ACP), FIO Kit

463038-L21

490833-B21

379820-B21

HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive
NOTE: 3TB of Disk Storage.

335921-B21

364430-B21

418408-B21

418800-B21