contents
 Overview      Standard Features      Models      Configuration Information-Factory Integrated Models      Core Options      Additional Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Overview

HP ProLiant ML150 Generation 5 (G5)

 

 

Front View:Rear View:
1. Power Supply 1. Mouse Port
2.Processor Air Duct2.Keyboard Port
3. Six Expansion Slots3. Serial Port
4.Main System Board4.Monitor Port
5.Front System Fan 5.USB Port
6.Hard Drive Bays (up to 8)6.Network Port
7.DVD-ROM Drive7.Dedicated LO100 LAN Management Port
8.Lockable Bezel8.Power Supply

What's New
  • Support for SAS/SATA Hot Plug and Non-Hot Plug Hard Drives

At A Glance
  • Processor:
    • Quad-Core Intel® Xeon® processor E5400 sequence
    • Dual-Core Intel® Xeon® processor E5200 sequence
    • Intel® 5100 chipset
    • 1066 MHz or 1333MHz Front Side Bus
  • Memory:
    • PC2-5300 Registered Buffered DIMMs (DDR2-667) Memory
    • 1 or 2 GB standard
    • 16 GB maximum
  • Storage Controller:
    • HP Embedded SATA RAID Controller (RAID 0,1,10)
    • SAS Model: HP SAS SC40Ge PCI Express to 4-Port SATA/SAS HBA Controller
      NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.
    • Performance Model: HP Smart Array E200/128 BBWC SATA/SAS Controller
  • Internal Drive Support:
    • Internal SAS storage capacity of up to 8.0TB (8 x 1TB SAS drives)
    • Internal SATA storage capacity of up to 8.0TB (8 x 1TB SATA drives)
    • Supports up to Eight (8) SAS/SATA hard drives via HBA or RAID Controller
  • Network Controller:
    • Embedded HP NC105i PCI Express Gigabit Server Adapter
  • Expansion Slots:
    • Six expansion slots: Two (2) PCI-Express x8, Three (3) PCI-Express x4(x8 connector) and One (1) PCI (32-bit/33MHz). One slot designated for optional HP ProLiant 100 G5 Lights-Out 100c Remote Management Card
  • USB Ports:
    • Eight (8) USB 2.0 ports:- 4 rear, 2 front, 2 Internal(1 standard and 1HP 5-pin)
  • Power Supply:
    • One 650W Single Non-Redundant Power Supply
    • 750W Redundant Power Supply(Optional)
  • Form Factor:
    • 5U Tower Models. Rack models optional HP Tower to Rack Conversion Tray, Universal Kit
  • Management:
    • Optional HP ProLiant 100 G5 Lights-Out 100c Remote Management Card
  • Deployment/Serviceability:
    • Easy chassis entry and component access
    • Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
  • Warranty:
    • This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives have a one year warranty.
      NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day response. (3-1-1 warranty offered in AP only, excluding Japan only). Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
contents
 Overview      Standard Features      Models      Configuration Information-Factory Integrated Models      Core Options      Additional Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Standard Features

NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://ccesalewspr02.cce.hp.com/docfiles/concentra/604671239/4AA1-7091ENW.pdf
Processor
One of the following depending on configuration
Dual-Core Intel® Xeon® processor E5205 (1.86 GHz, 1066FSB, 65W)
Quad-Core Intel® Xeon® processor E5405 (2.0 GHz,1333 FSB, 80W)
Quad-Core Intel® Xeon® processor E5410 (2.33 GHz,1333 FSB, 80W)
Quad-Core Intel® Xeon® processor E5420 (2.50 GHz,1333 FSB, 80W)
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz,1333 FSB, 80W)
Quad-Core Intel® Xeon® processor E5440 (2.83 GHz, 1333 FSB, 80W)

Cache Memory Integrated 1 x 6 MB level 2 cache (E5200 sequence)
Integrated 2 x 6 MB level 2 cache (E5400 sequence)

Upgradeability Upgradeable to two processors (Dual or Quad-Core)
NOTE: Please contact your regional sales support
NOTE: Future upgradeable to Xeon® Series 5400/5300 Quad-Core processors (Please contact your regional sales support to determine quad core upgradeability. Some of the earlier shipping models may not support this upgrade). 5100 Dual-Core models are not upgradeable to the 5200 Dual-Core processors.

Chipset Intel® 5100 Chipset

Memory Type PC2-5300 Registered Buffered DIMMs (DDR2-667)
Standard for NHP SATA Models 1 GB
Standard for HP SAS/SATA Model and Performance Model 2 GB
Maximum 16 GB

Network Controller Embedded HP NC105i PCI Express Gigabit Server Adapter 10/100/1000 WOL (Wake on LAN)

Expansion Slots # Technology
Bus Width
Connector Width
Bus Number*
Form Factor
Notes
1
32-bit/33MHz PCI
N/A
N/A
0x0A
Full length, full height slot
Non Hot-plug
2
PCI-Express (Gen 1)
x4
X8
0x03
Full length, full height slot
Non Hot-plug
3
PCI-Express (Gen 1)
X4
X8
0x05
Full length, full height slot
Non Hot-plug
4
PCI-Express (Gen 1)
X4
X8
0x01
Full length, full height slot
Non Hot-plug
5
PC-Express (Gen 1)
X8
X8
0x02
Full length, full height slot
Non Hot-plug
6 PCI-Express (Gen 1)
X8
X8
0x09
Full length, full height slot
Non Hot-plug

Storage Controller SATA/SAS Model HP Embedded SATA RAID Controller
HP SAS SC40Ge PCI Express to 4-Port SATA/SAS HBA Controller
NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.
Performance Model HP Smart Array E200/128 BBWC SATA/SAS Controller

Storage Diskette Drive None ship standard
1.44 MB USB Diskette Drive Option available
Optical Drive HP Half-Height SATA DVD-ROM Optical Drive
Hard Drives None ship standard
SAS and SATA hard drive options are available
One 160GB Non-Hot Plug HDD for Non-Hot Plug BTO models

Maximum Internal StorageSATA8.0TB (8 x 1TB) SATA (With optional SAS controller)
SAS8.0TB (8 x 1TB) SAS (With optional SAS controllers)
NOTE: The Embedded SATA RAID controller support for a single logical drive is limited to 2TB.

Interfaces Parallel 0
Serial 1
Pointing Device (Mouse, PS2) 1
Graphics 1
Keyboard (PS2) 1
USB 2.0 Ports
Dedicated USB
8 (4 Rear, 2 Front, and 2 Internal)
1 (available for USB tape connectivity)
NOTE: Please see the following URL for additional information regarding USB support:
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html.
Network RJ-45 (Ethernet) 1 (10/100/1000 Gbits/s)
Remote Management 1 (10/100 via optional HP ProLiant 100 G5 Lights-Out 100c Remote Management Card

Graphics32MB shared supporting 1600x1200x16M resolution

Form Factor Tower (5U)
NOTE: Rack mounting available via HP Tower to Rack Conversion Tray, Universal Kit. Please see the options section in this QuickSpecs.

Industry Standard Compliance ACPI V2.0 compliant
PCI 2.3 compliant
PXE Support
WOL Support
Microsoft® Logo certifications

Manageability Optional HP ProLiant 100 G5 Lights-Out 100c Remote Management Card
Embedded IPMI standard reporting

Security Power-on password
Setup password
Diskette boot control

Server Power Cords One Lowline NEMA power cord

Power Supply One 650W Non-Redundant Power Supply, Non-hot plug
750W Redundant Power Supply (Optional)

System Fans Two (2) – Non-hot plug, Non-redundant system fans

Remote ManagementLights-Out 100cLights Out LO100c is a Remote Management Card (RMC) for HP ProLiant 100 series servers that do not have embedded LO100i. The LO100c has all the features of the LO100i Advanced license and allows customers, or their service providers, to remotely manage HP ProLiant servers over a LAN or the Internet from anywhere, anytime regardless whether the server is located in the same building, across town, or around the globe.

With LO100c, users can acquire complete remote control with Virtual KVM (graphical hardware-based, remote console). Users can also access the server's serial console, control system power, update system firmware and software, as well as monitor system environmental conditions. The LO100c remote management card can be accessed from a web browser or command line interface. This virtual "at-the-server" functionality means administrators stay in control of remote HP ProLiant 100 series servers.

The HP Lights-Out100c consists of a management processor and firmware that provides cost-effective, entry-level lights-out functionality, basic system board management functions, and diagnostics.
NOTE: For more information, please refer to the QuickSpecs for the LO100c found at:: http://h18004.www1.hp.com/products/servers/management/
remotemgmt/lightsout100/index.html

OS Support

Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Solaris 10 for x86/x64 based Systems
NetWare

NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/supportos and our driver download page http://www.hp.com/support/ML150G5
NOTE: Netware 6.5 is supported with the non-RAID mode embedded SATA controller. For driver support in RAID mode with Netware 6.5, the Smart Array E200 Controller (P/N 411508-B21) or HP SC44Ge SAS PCI-E Host Bus Adapter (P/N 416096-B21) must be purchased.

Factory Express Portfolio for Servers and StorageHP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging and custom packaging to meet customer needs. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant & HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services on your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.


HP Enterprise Configurator

The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.


Service and Support

HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service – Simplify ProLiant solution implementation, maintenance and management.

  • Support Service – 3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
  • Deployment Service – Hardware Installation only

Enhanced Service – Optimize service level to increase IT performance and availability

  • Support Service – 3 Year 13x5 Same Business Day, 4-Hour response coverage
  • Deployment Service – Installation and Start-up only

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack

contents
 Overview      Standard Features      Models      Configuration Information-Factory Integrated Models      Core Options      Additional Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Models

SAS/SATA Hot Plug Models

Performance Model

HP ML150G5 E5410 HP SATA/SAS, 2GB, (1P)
450164-xx1

Base Model

HP ML150G5 E5405 HP SATA/SAS, 2GB (1P)
450163-xx1

Processor(s)
One of the following depending on Model
(1) Quad-Core Intel® Xeon® processor E5410 (2.33 GHz, 1333 FSB, 80W)
(1) Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 1333 FSB, 80W)
Cache Memory
One of the following depending on Model
Integrated 2 x 6 MB L 2 cache (E5400 sequence)
Integrated 1 x 6 MB level 2 cache (E5200 sequence)
Memory2 GB PC2-5300 Registered DIMMs (DDR2-667)
Network ControllerEmbedded HP NC105i PCI Express Gigabit Server Adapter 10/100/1000 WOL
Storage ControllerSATA/SAS model: HP SC40Ge 4 Internal Port SATA/SAS Host Bus Adapter
Performance model: HP E200 8 Internal Port Smart Array SAS/SATA Controller
Hard DriveNone ship standard
Internal Storage
One of the following depending on Model
SAS: 8.0TB (8 x 1TB)
SATA: 8.0TB (8 x 1TB)
(With optional SAS controllers and 2nd HDD Cage)
Optical DriveHP Half-Height SATA DVD-ROM Optical Drive
Form FactorTower standard; 5U rack via optional rack mounting kit

SATA Non-Hot Plug Models

HP ML150G5 E5205 NHP 160GB SATA, 1GB, (1P)
450161-xx1

HP ML150G5 E5405 NHP 160GB SATA, 1GB, (1P)
450162-xx1

 

Processor(s)
One of the following depending on Model
(1) Dual-Core Intel® Xeon® processor E5205 (1.86 GHz, 1066FSB, 65W)
(1) Quad-Core Intel® Xeon® processor E5405 (2.00 GHz,1333 FSB, 80W)
Cache MemoryIntegrated 1x6MB L 2 cache (E5200 sequence)
Memory1 GB PC2-5300 Registered DIMMs (DDR2-667)
Network ControllerEmbedded HP NC105i PCI Express Gigabit Server Adapter 10/100/1000 WOL
Storage ControllerHP Embedded SATA RAID Controller
Hard DriveOne 160GB Non-Hot Plug HDD
Internal Storage SATA: 4.0TB (4 x 1 TB)
NOTE: A Hot-plug hard drive cage can be installed into a Non-hot plug server by ordering a HBA (or Smart Attay) plus one HP 2nd LFF Hot-plug hard drive cage kit.
Optical DriveHP Half-Height SATA DVD-ROM Optical Drive
Form FactorTower standard; 5U rack via optional rack mounting kit
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.

Country Code Key XX=00 NA
XX=01 Australia
XX=03 UK
XX=04 Germany
XX=05 France
XX=06 Italy
XX=07 Spain
XX=13 Portugal
XX=20 Brazil
XX=29 Japan
XX=37 AP
XX=42 Euro
XX=AA PRC
XX=AB Taiwan
XX=AD Korea
contents
 Overview      Standard Features      Models      Configuration Information-Factory Integrated Models      Core Options      Additional Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Configuration Information-Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.

Step 1: Base Configuration (Select only one model from the following selections)
Models HP ProLiant ML150 G5 Non-hot Plug SATA CTO Chassis
450290-B21
Factory Integrated Models ship with:
Embedded HP NC105i PCI Express Gigabit Server Adapter 10/100/1000 WOL
Tower 5U Form Factor
HP ProLiant ML150 G5 Hot Plug SAS/SATA CTO Chassis
450291-B21
Factory Integrated Models ship with:
Embedded HP NC105i PCI Express Gigabit Server Adapter 10/100/1000 WOL
Tower 5U Form Factor

Step 2: Choose Required Options (Select only one option from each category unless otherwise noted)
Processors Quad-Core Processor Option Kits  
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz,1333 FSB, 80W), FIO
NOTE: If 2 processors are desired, select one 455420-L21 and one 455420-B21
455420-L21
Quad-Core Intel® Xeon® processor E5410 (2.33 GHz,1333 FSB, 80W), FIO
NOTE: If 2 processors are desired, select one 455421-L21and one 455421-B21
455421-L21
Quad-Core Intel® Xeon® processor E5420 (2.50 GHz,1333 FSB, 80W), FIO
NOTE: If 2 processors are desired, select one 455422-L21and one 455422-B21
455422-L21
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz,1333 FSB, 80W), FIO
NOTE: If 2 processors are desired, select one 455423-L21and one 455423-B21
455423-L21
Quad-Core Intel® Xeon® processor E5440 (2.50 GHz,1333 FSB, 80W), FIO
NOTE: If 2 processors are desired, select one 455424-L21and one 455424-B21
455424-L21
Dual-Core Processor Option Kits  
Dual-Core Intel® Xeon® processor E5205 (1.86 GHz, 1066FSB, 65W)
NOTE: If 2 processors are desired, select one 455419-L21and one 455419-B21
455419-L21
Memory 1 GB REG PC2-5300 2 x 512 MB Single Rank Kit
408850-B21
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit
408851-B21
4 GB REG PC2-5300 2 x 2 GB Single Rank Kit
461840-B21
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit
408854-B21
Optical Drives HP Half-Height SATA DVD-ROM Optical Drive
447326-B21
HP Half-Height SATA DVD RW Optical Drive
447328-B21
Hard Drives NOTE: Required only if P/N 450290-B21 is selected in Step 1 above.
NOTE: the components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
 
SATA Non-Hot Plug 3.5" Midline (MDL) Drives  
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD 462595-B21
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD 458941-B21
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD 458939-B21
SATA Non-Hot Plug 3.5" Entry (ETY) Drives  
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD 458947-B21
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives  
HP 400GB 3G 10K 3.5" DP SAS ENT HDD 508232-B21
HP 450GB 3G 15K 3.5" DP SAS ENT HDD 454234-B21
HP 300GB 3G 15K 3.5" DP SAS ENT HDD 417950-B21
HP 146GB 3G 15K 3.5" DP SAS ENT HDD 417855-B21
HP 300GB SAS 15K 3.5" SP HDD 431950-B21
HP 146GB SAS 15K 3.5" SP HD 432093-B21
HP 72GB SAS 15K 3.5" SP HDD 432095-B21
NOTE: If a Non-Hot Plug CTO Chassis (450290-B21) is selected in Step 1 and SAS Non-Hot- Plug drives are selected, a SAS Array Controller must also be selected.  
Storage Controllers NOTE: If one of the following Smart Array Controller or SAS HBA is selected; the HP Internal SAS/SATA 4-Port Cable (P/N 457692-B21) is also required.  
Smart Array E200 Controller  
HP Smart Array E200/128 BBWC Controller 411508-B21
SAS HBA  
HP SC40Ge SAS HBA, FIO
NOTE: RAID 0,1.
NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.
449176-B21
HP SC44Ge SAS PCI-E Host Bus Adapter
NOTE: RAID 0,1.
NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
416096-B21
SCSI HBA
HP SC11Xe U320 PCI-E Host Bus Adapter
412911-B21
HP Internal SAS/SATA 4-Port cable 457692-B21
Power supply ML150G5 650W Power Supply, FIO only
465462-B21
HP ML150G5 750W Redundant Power Supply Kit 458310-B21

Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options" and "Additional Options " sections below.
Operating Systems Pre-install Microsoft Windows 2003 Standard (English)
409167-B21
NOTE: For additional language part numbers, please visit: http://www.hp.com/go/microsoft and select 'HP & Windows OS'.  
NOTE: For additional options, please refer to the "Options" section below.
NOTE: For the installation of Windows and other OS's, a floppy drive may be required to complete driver installation if you have a SAS add-on card configured in system. For configurations without floppy drive; please purchase a HP USB Floppy Key. See options section of this QuickSpecs.
 
contents
 Overview      Standard Features      Models      Configuration Information-Factory Integrated Models      Core Options      Additional Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Core Options

NOTE: Some options may not be available for factory integration. Please contact an HP sales representative for additional information.
Unique Options HP ML150G5 2nd LFF HP Drive Cage Kit
458312-B21
HP ML150G5 750W Redundant Power Supply Kit, WW 458310-B21
HP ML150G5 750W Redundant Power Supply Kit, US 458310-001
HP ML150G5 750W Redundant Power Supply Kit, Australia 458310-011
HP ML150G5 750W Redundant Power Supply Kit, Euro 458310-021
HP ML150G5 750W Redundant Power Supply Kit, UK 458310-031
HP ML150G5 750W Redundant Power Supply Kit, Japan 458310-291
HP ML150G5 750W Redundant Power Supply Kit, PRC 458310-AA1

Processors Quad-Core Processor Option Kits  
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz,1333 FSB, 80W)
455420-B21
Quad-Core Intel® Xeon® processor E5410 (2.33 GHz,1333 FSB, 80W)
455421-B21
Quad-Core Intel® Xeon® processor E5420 (2.50 GHz,1333 FSB, 80W)
455422-B21
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz,1333 FSB, 80W)
455423-B21
Quad-Core Intel® Xeon® processor E5440 (2.83 GHz,1333 FSB, 80W)
455424-B21
Dual-Core Processor Option Kits
Dual-Core Intel® Xeon® processor E5205 (1.86 GHz, 1066FSB, 65W)
455419-B21

Memory 1 GB REG PC2-5300 2 x 512 MB Single Rank Kit
408850-B21
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit
408851-B21
4 GB REG PC2-5300 2 x 2 GB Single Rank Kit
461840-B21
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit
408854-B21

Optical DrivesHP Half-Height SATA DVD-ROM Optical Drive
447326-B21
HP Half-Height SATA DVD RW Optical Drive
447328-B21

Hard Drives NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.  
SATA Non-Hot Plug 3.5" Midline (MDL) Drives  
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD 462595-B21
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD 458941-B21
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD 458939-B21
SATA Non-Hot Plug3.5" Entry (ETY) Drives  
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD 458947-B21
SATA Hot Plug 3.5" Midline (MDL) Drives  
HP 1TB 3G SATA 7.2K 3.5" MDL HDD 454146-B21
HP 750GB 3G SATA 7.2K 3.5" MDL HDD 458930-B21
HP 500GB 3G SATA 7.2K 3.5" MDL HDD 458928-B21
HP 250GB 3G SATA 7.2K 3.5" MDL HDD 458926-B21
SATA Hot Plug 3.5" Entry (ETY) Drives  
HP 160GB 3G SATA 7.2K 3.5" ETY HDD 458945-B21
NOTE: SATA drives have a 1 year warranty. Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html (Worldwide)
 
3.5" SATA Non-Hot Plug Drives  
HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD 411276-B21
HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD 411275-B21
3.5" SATA Hot Plug Drives  
HP 750GB 1.5G SATA 7.2K 3.5" HDD 432341-B21
HP 500GB 1.5G SATA 7.2K 3.5" HDD 395473-B21
HP 250GB 1.5G SATA 7.2K 3.5" HDD 349239-B21
HP 160GB 1.5G SATA 7.2K 3.5" HDD 349238-B21
NOTE: The previous generation of 1.5G SATA Non-Hot Plug hard drives are supported. These drives can be purchased as an option, however, are no longer configurable.
NOTE: SATA drives have a 1 year warranty. Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/11940_div/11940_div.html (Worldwide)
 
SAS Hot Plug 3.5" Midline (MDL) Drives  
HP 1TB 7.2K 3.5" DP SAS MDL HDD 461137-B21
HP 750GB 7.2K 3.5" DP SAS MDL HDD 461135-B21
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives  
HP 400GB 3G NHP 10K 3.5" DP SAS ENT HDD 508232-B21
HP 450GB 3G NHP 15K 3.5" DP SAS ENT HDD 454234-B21
HP 300GB 3G NHP 15K 3.5" DP SAS ENT HDD
417950-B21
HP 146GB 3G NHP 15K 3.5" DP SAS ENT HDD
417855-B21
HP 300GB SAS 15K 3.5" SP HDD
431950-B21
HP 146GB SAS 15K 3.5" SP HD
432093-B21
HP 72GB SAS 15K 3.5" SP HDD
432095-B21
NOTE: SAS hard drives require a SAS HBA or Smart Array Controller.
NOTE: SAS non-hot plug drives will also require the HP Internal SAS/SATA 4-Port cable (P/N 457692-B21)  
SAS Hot Plug 3.5" Enterprise (ENT) Drives  
HP 400GB 3G SAS 10K 3.5" DP HDD 459508-B21
HP 450GB 3G SAS 15K 3.5" DP HDD 454232-B21
HP 300GB 3G SAS 15K 3.5" SP HDD 431944-B21
HP 300GB 3G SAS 15K 3.5" DP HDD 416127-B21
HP 146GB 3G SAS 15K 3.5" SP HDD 375872-B21
HP 146GB 3G SAS 15K 3.5" DP HDD 384854-B21
HP 72GB 3G SAS 15K 3.5" SP HDD 375870-B21
HP 72GB 3G SAS 15K 3.5" DP HDD 384852-B21
NOTE: SAS hard drives require a SAS HBA or Smart Array Controller.  
NOTE: SAS non-hot plug drives will also require the HP Internal SAS/SATA 4-Port cable (P/N 457692-B21)
NOTE: SATA drives have a 1 year warranty. Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html (Worldwide)
 

Communications HP NC110T PCI Express Gigabit Server Adapter
434905-B21
HP NC360T PCI Express Dual Port Gigabit Server Adapter
412648-B21
HP NC364T PCI Express Quad Port Gigabit Server Adapter
435508-B21
HP NC373F PCI Express Multifunction Gigabit Server Adapter
394793-B21
v90 56K PCI Modem US (with specific modem cable) RoHS
EK694AA
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs  
contents
 Overview      Standard Features      Models      Configuration Information-Factory Integrated Models      Core Options      Additional Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Additional Options

Remote Management HP ProLiant 100 G5 Lights-Out 100c Remote Management Card
445513-B21

Storage Controllers Smart Array E200 Controller  
HP Smart Array E200/128 BBWC Controller 411508-B21
Optional Upgrades  
HP Internal SAS/SATA 4-Port Cable
NOTE: This cable is required when adding either the HP SC44Ge HBA (P/N 416096-B21) or the HP Smart Array E200 (P/N 411508-B21) on Non-Hot Plug SATA server models.
457692-B21
SAS HBA  
HP SC44Ge SAS PCI-E Host Bus Adapter
NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
416096-B21
SCSI HBA  
HP SC11Xe U320 PCI-E Host Bus Adapter 412911-B21
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information:
http://h18004.www1.hp.com/products/quickspecs/12617_div/12617_div.html (SC44Ge HBA)
http://h18000.www1.hp.com/products/quickspecs/12566_div/12566_div.html (SC11Xe HBA)
http://h18000.www1.hp.com/products/quickspecs/12460_div/12460_div.html
(Smart Array E200 Controller)
 

Tape Storage NOTE: Installation of SCSI internal tape drives in a ML150 model requires SCSI controller kit (PN 412911-B21).  
NOTE: For complete listing of tape drive offerings see: http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html  
Tape Drives  
DAT USB Tape Drives  
HP StorageWorks DAT 40 USB Internal Tape Drive (Carbonite)
DW022A
HP StorageWorks DAT 72 USB Internal Tape Drive (Carbonite)
DW026A
DAT SCSI Tape Drives  
HP StorageWorks DAT 40 SCSI Internal Tape Drive (Carbon)
C5686C
HP StorageWorks DAT 72 SCSI Internal Tape Drive (Carbon)
Q1522B
HP StorageWorks DAT 160 SCSI Internal Tape Drive
Q1573A
LTO Ultrium Tape Drives  
HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive
DW085A
HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive
EH847A

Disk-Based Backup RDX Removable Disk Backup
HP RDX160 Internal Removable Disk Backup System
NOTE: 160GB of Disk Storage

AJ765A

HP RDX320 Internal Removable Disk Backup System
NOTE: 320GB of Disk Storage
AJ767A
HP RDX500 Internal Removable Disk Backup System
NOTE: 500GB of Disk Storage
AJ934A
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13036_div/13036_div.html
D2D Backup
HP StorageWorks D2D120 Backup System with Data Protector Express Software Kit
NOTE: 2TB of Disk Storage
EH924A
HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive
NOTE: 3TB of Disk Storage
EH952A
NOTE: Please see the HP D2D Backup Systems QuickSpecs for additional information: http://www.hp.com/go/d2d

Uninterruptible Power Systems HP Tower UPS  
HP T1500 G3 UPS Models
HP T1500 G3 UPS, INTL
AF451A
HP T1500 G3 UPS, NA/JPN
AF450A
HP T1000 G3 UPS Models
HP T1000 G3 UPS, INTL AF449A
HP T1000 G3 UPS, NA/JPN AF448A
HP T1000 G2 UPS  
NOTE: Please see QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13160_div/13160_div.html (Worldwide)  
HP T750 UPS  
HP T750 UPS, Low Voltage (NA/JPN) 378439-D71
NOTE: Please see QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12192_div/12912_div.html (Worldwide)  

HP Rack Series HP Rack 10000 G2 Series (Carbon/Graphite Metallic)  
10642 G2 (42U) Rack Cabinet 1200mm Deep - Shock Pallet
AF034A
10642 G2 (42U) Rack Cabinet 1200mm Deep - Pallet
AF038A
10647 G2 (47U) Rack Cabinet 1200mm Deep - Shock Pallet
AF044A
10647 G2 (47U) Rack Cabinet 1200mm Deep - Pallet
AF045A
NOTE: It is mandatory to use a shock pallet when shipping racks with equipment installed.
NOTE: Please see the Rack 10000 G2 QuickSpecs for Technical Specifications such as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html (Worldwide)
 
NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.hp.com/go/rackandpower.  

HP Rack Options HP KVM Switch Options  
IP Console Switch with Virtual Media (KVM/IP), 4x1x16
AF602A
IP Console Switch with Virtual Media (KVM/IP), 2x1x16
AF601A
Server Console Switch with Virtual Media (KVM), 0x2x16
AF600A
PS2 Virtual Media Interface Adapter, 1 Pack
NOTE: The AF604A is only compatible with the Console Switches with Virtual Media.
AF604A
PS/2 Interface Adapter, 1 pack
262588-B21
PS/2 Interface Adapter, 8 pack
262587-B21
NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches. Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm.
HP 1x4 Console Switch
AF611A
HP PS2 Server Console Cable, 6 foot, 2-Pack
AF612A
HP USB Server Console Cable, 6 foot, 2-Pack
NOTE: required for supporting USB peripherals.
AF613A
NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
Rack Kits  
HP Tower to Rack Conversion Tray, Universal Kit 417705-B21

USB Options HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver)
DC172B
HP USB 04 Standard Keyboard
DT528A#xxx
HP 1GB USB 2.0 Floppy Drive Key
442085-B21
USB Floppy Drive, External
DC361B
NOTE: For the installation of Windows and other OS's, a floppy drive or the HP USB Floppy Drive Key may be required to complete driver installation. A standard USB drive key may not work to complete driver installation  

Service and Support Offerings
(HP Care Pack Services)
Support Service
Next Business Day On-Site Service, 9-Hour x 5-Day Coverage, 3 Years, Electronic
U8184E
Same Business Date On-Site Service 13-Hour x 5-Day Coverage, 3 Years, Electronic
U8192E
Deployment Services
Hardware Installation, Electronic (install services)
U8195E
NOTE: For more information, customer/resellers can contact: http://www.hp.com/services/carepack.
contents
 Overview      Standard Features      Models      Configuration Information-Factory Integrated Models      Core Options      Additional Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Memory

HP ProLiant ML150 Generation 5 Server

DIMM Installation Guidelines:
NOTE: Charts do not represent all possible memory configurations. Memory must be populated in one of the following ways:

1. Slot 1 only; slots 1 and 2 only (pairs must be of the same size)
2. Slots 1, 2, 3, 4, 5 ,and 6 (pairs must be of the same size and in the example below with slots 1 and 2 the same and slots 2 and 3 the same, and slots 5 and 6 the same)
3. Dual rank DIMMs can only be supported in slots 1 and 2.

Standard Memory
All HP ML150 G5 models ship with PC2-5300 Registered DIMMs (DDR2-667)
Hot Plug SAS/SATA (performance and/or base) models include 2 x 1 GB DIMMs (2 GB total)
Non-Hot Plug SATA models include two 512 MB DIMMs (1 GB total)
Factory Integrated Models include the memory capacity of your choice.

Standard Memory Replaced with Optional Memory
Up to 16 GB of memory is available with the removal of the standard 1 GB of memory and the optional installation of PC2-5300 Registered DIMMs (DDR2-667) Memory kits.

Dual Rank Memory Options
Memory
Slot
 
1A
2A
3B
4B
5C
6C
    DR DR        
    DR DR DR DR    
Standard
2 GB
1 GB
1 GB
Empty
Empty
Empty
Empty
Optional
10 GB
1 GB
1 GB
2 GB
2 GB
2 GB
2 GB
Maximum
16 GB
4 GB
4 GB
2 GB
2 GB
2 GB
2 GB
Dual Rank & Single Rank Memory Options
Memory
Slot
 
1A
(Dual/Single Rank)
2A
(Dual/Single Rank)
3B
(Dual/Single Rank)
4B
(Dual/Single Rank)
5C
(Single Rank)
6C
(Single Rank)
    DR DR        
    DR DR SR SR    
    DR DR SR SR SR SR
    DR DR DR DR    
Standard
1 GB
512 MB
512 MB
Empty
Empty
Empty
Empty
Optional
9 GB
512 MB
512 MB
2 GB
2 GB
2 GB
2 GB
Maximum
16 GB
4 GB
4 GB
2 GB
2 GB
2 GB
2 GB
NOTE: Please ensure socket 1 is populated, otherwise the system will not boot. Install memory in balanced pairs (see memory options) for best performance.  
Following are memory options available from HP:  
1 GB PC2-5300 DDR2 2 x 512 MB Single Rank Kit
408850-B21
2 GB PC2-5300 DDR2 2 x 1 GB Single Rank Kit
408851-B21
4 GB PC2-5300 DDR2 2 x 2 GB Single Rank Kit
461840-B21
8 GB PC2-5300 DDR2 2 x 4 GB Dual Rank Kit
408854-B21
contents
 Overview      Standard Features      Models      Configuration Information-Factory Integrated Models      Core Options      Additional Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Storage

Non-Hot Plug SATA or Hot Plug SAS/SATA
1
16x SATA DVD-ROM
2
Removable Media Bay with EMI Shield
3 Thermal Sensor
4USB Port
5Four/Eight Hot Plug SAS/SATA or Four Non-Hot Plug SATA Drive Bays
  
Drive Support
 
Quantity
Supported
Position
Supported

Controller
Removable Media
 
SATA DVD-ROM Drive
Up to 1
1
SATA

Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 3.5" Enterprise (ENT) Drives
 
Quantity
Supported
Position
Supported

Controller
450GB 3G SAS 15K
400GB 3G SAS 10K
300GB 3G SAS 15K
146GB 3G SAS 15K
72GB 3G SAS 15K
Up to 8
5
(Drive slots 1-8)
LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller
Smart Array E200 SATA/SAS Controller
Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
 
Quantity
Supported
Position
Supported

Controller
400GB 3G SAS 10K
450GB 3G SAS 15K
300GB 3G SAS 15K
146GB 3G SAS 15K
72GB 3G SAS 15K
Up to 8 5
(Drive slots 1-8)
LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller
Smart Array E200 SATA/SAS Controller
Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter
SAS Hot Plug 3.5" Midline (MDL) Drives
 
Quantity
Supported
Position
Supported
Controller
1TB 3G SAS 7.2K
750GB 3G SAS 7.2K
Up to 8 5
(Drive slots 1-4)
Embedded 4 port SATA Controller (for HP SATA models)
LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller
Smart Array E200 SATA/SAS Controller
Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter
SATA Hot Plug 3.5" Midline (MDL) Drives
  Quantity
Supported
Position
Supported

Controller
1TB 3G SATA 7.2K
750GB 3G SATA 7.2K
500GB 3G SATA 7.2K
250GB 3G SATA 7.2K
Up to 8
5
(Drive slots 1-4)
Embedded 4 port SATA Controller (for HP SATA models)
LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller
Smart Array E200 SATA/SAS Controller
Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter
NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.
SATA Hot Plug 3.5" Entry (ETY) Drives
  Quantity
Supported
Position
Supported

Controller
160GB 3G SATA 7.2K
Up to 8
5
(Drive slots 1-4)
Embedded 4 port SATA Controller (for HP SATA models)
LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller
Smart Array E200 SATA/SAS Controller
SATA Non-Hot Plug 3.5" Midline (MDL)
  Quantity
Supported
Position
Supported

Controller
750GB 3G SATA15K
500GB 3G SATA 15K
250GB 3G SATA 15K
Up to 8 5
(Drive slots 1-4)
Embedded 4 port SATA Controller (for HP SATA models)
LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller
Smart Array E200 SATA/SAS Controller
SATA Non-Hot Plug 3.5" Entry (ETY)
  Quantity
Supported
Position
Supported

Controller
160GB 3G SATA 15K Up to 8 5
(Drive slots 1-4)
Embedded 4 port SATA Controller (for HP SATA models)
LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller
Smart Array E200 SATA/SAS Controller
3.5" SATA Non-Hot Plug Drives
  Quantity
Supported
Position
Supported

Controller
250GB 1.5G SATA 7.2K
160GB 1.5G SATA 7.2K
Up to 8 5
(Drive slots 1-4)
Embedded 4 port SATA Controller (for HP SATA models)
LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller
Smart Array E200 SATA/SAS Controller
Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter
NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.
3.5" SATA Hot Plug Drives
  Quantity
Supported
Position
Supported

Controller
750GB 1.5G SATA 7.2K
500GB 1.5G SATA 7.2K
250GB 1.5G SATA 7.2K
Up to 8 5
(Drive slots 1-4)
Embedded 4 port SATA Controller (for HP SATA models)
LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller
Smart Array E200 SATA/SAS Controller
Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter
NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.

NOTE: To support 8 drives, the purchase of the optional HP HDD cage and possibly purchase a second SATA/SAS controller for 8 port support are required.
Maximum Storage Capacity SAS Models
Internal 8.0TB (8 x 1TB SAS hard drives)
Total 8.0TB (8 x 1TB SAS hard drives)
Maximum Storage Capacity SATA Models
Internal 8.0TB (8 x 1TB SATA drives)
Total 8.0TB (8 x 1TB SATA drives)

Tape and Disk-Based Backup
NOTE: Installation of SCSI tape drives in a ML150 G5 model requires SCSI controller kit (PN: 412911-B21).
NOTE: For a complete listing of compatible tape and disk-based backup offerings, please visit: http://www.hp.com/go/connect.
 
Position
Supported
Controller
Controller/HBA Option Kit Part Number
Internal USB Tape Drives
DAT 40 USB
DAT 72 USB
DAT 160 USB
2
USB 2.0 port
N/A
   
 
External USB Tape Drives
DAT 40 USB
DAT 72 USB
DAT 160 USB
External
USB 2.0 port
N/A
   
 
Internal SCSI Tape Drives
DAT 40
DAT 72
DAT 160
2
HP SC11Xe Host Bus Adapter
412911-B21
   
 
External SCSI Tape Drives
DAT 40
DAT 72
DAT 160
External

HP SC11Xe Host Bus Adapter

412911-B21
   
 
Internal SAS Tape Drives
LTO-2 Ultrium 448 SAS
LTO-3 Ultrium 920 SAS
2 HP SC44Ge Host Bus Adapter 416096-B21
       
External SAS Tape Drives
LTO-2 Ultrium 448 SAS
LTO-3 Ultrium 920 SAS
External HP SC44Ge Host Bus Adapter 416096-B21
       
HP StorageWorks D2D Backup Systems
D2D120
D2D130
External
Embedded Network Controller
N/A
       
HP StorageWorks Removable Disk Backup System, Internal
RDX160
RDX320
RDX500
2 USB 2.0 port N/A
contents
 Overview      Standard Features      Models      Configuration Information-Factory Integrated Models      Core Options      Additional Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Power Specifications

Part Number459558-001
Spare Kit 461512-001
Operational Input Voltage Range (Vrms)90 to 135 and 180 to 264 V ac full ranging
Frequency Range (Nominal) (Hz)47 to 66 Hz
Nominal Input Voltage (Vrms)
100
115
208
220
230
240
Max Rated Output Wattage Rating
600
600
600
600
600
600
Nominal Input Current (A rms)
10
10
5
5
5
5
Max Rated Input Wattage Rating (Watts)
800
780
760
750
750
750
Max. Rated VA (Volt-Amp)
842.10
821.05
844.44
833.33
833.33
833.33
Efficiency (%)
75
77
79
80
80
80
Power Factor
0.95
0.95
0.9
0.9
0.9
0.9
Leakage Current (mA)
3.5mA
3.5mA
3.5mA
3.5mA
3.5mA
3.5mA
Maximum Inrush Current (A peak)
50
50
50
50
50
50
Maximum Inrush Current duration (mS)
3
3
3
3
3
3
 
System Specifications
 
Power**
HP ProLiant ML150 G5 Fully Configured
(see**)
Fully Loaded System Input Wattage (W)
630W
Fully Loaded System Input Current (A rms)
6A @ 115V, 3A @ 230V
Fully Loaded System Thermal (BTU- Hr)r)
1794 BTU (526W)
Fully Loaded System VA (Volt-Amp)
630
System Leakage with all power supplies loaded (mA)
3.5mA
System Inrush Current with all power supplies loaded (A)
50A
Power cord requirements
Nema 5-15P to IEC320-C13
IEC320-C13 to IEC320-C14
**Power shown is for a fully configured system consisting of  
(2) CPU
(4) double-sided DIMMs
(6) HDDs SAS/SATA
(1) DVD-ROM
(3) x4 PCI-E
(2) x8 PCI-E
(1) PCI 32 3.3V
(1) Lights-Out Remote Management
(1) 650 watts power supply
 
Power Cords (13 Cord Sets)
 
Country
Power Cord Part Number
APD 100614-009, 100613-008, 139867-004, 187487-004(India)
Brazil 285052-001
Italy 109197-008
Australia/New Zealand 100661-001
Euro 100614-009
France 100614-009
Germany 100614-009
Japan 139867-004
PRC 286496-001
UK/Singapore 100613-008
US, Taiwan 121565-001
contents
 Overview      Standard Features      Models      Configuration Information-Factory Integrated Models      Core Options      Additional Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Technical Specifications

System Unit Dimensions (HxWxD) 7.87 x 16.7 x 24.28 in (20 x 42.4 x 61.68 cm)
Weight (approximate) Maximum:
(All hard drives, power supplies and processors installed)
60.96 lb (27.65 kg)
Minimum:
(One hard drive, power supply and processor installed)
40.9 lb (18.55 kg)
Input Requirements
(per power supply)
Range Input Voltage 90 to 135 VAC
180 to 265 VAC
Normal Line Voltage 100 to 127 VAC
200 to 240 VAC
Rated Input Current load 11.6A at 100 to 127 VAC
5.5A at 200 to 240 VAC
Rated Input Frequency 47 to 66 Hz
Rated Input Power 930 W (Max)
BTU Rating Maximum 2218 BTU
Power Specifications To review typical power ratings use the Power Calculator which is available via the online tool located at URL: http://h30099.www3.hp.com/configurator/cal/
Power%20Calculator%20Catalog.xls
Power Supply Output Power
(per power supply)
Rated Steady-State Power 526 W (at 100 VAC) for system
526 W (at 200 VAC)
Maximum Peak Power 526 W (at 100 VAC)
526 W (at 200 VAC)
System Inlet Temperature Operating 50° to 93° F (10° to 35° C) at sea level with an altitude derating of 1.8°F per 1,000 ft (1.0° C per every 305 m) above seal level to a maximum of 10,000 ft (3050 m) no direct sustained sunlight . Maximum rate of change is 18°F/hr (10°C/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 86°F (30°C).
Non-Operating -40° to 140° F (-30° to 60° C)
Relative Humidity
(non-condensing)
Operating 10% to 90% relative humidity (Rh), 101.7°F (38.7°C) maximum we bulb temperature, non-condensing
Non-operating** 10% to 95% relative humidity (Rh), 101.7°F (38.7°C) maximum wet bulb temperature, non-condensing.
Altitude Operating 10,000 ft (3000m). Maximum allowable altitude change rate is 1°C per 300m
Non-Operating 30,000 ft (9144m). Maximum allowable altitude change rate is 1°C per 300m
Acoustic Noise Listed are the declared A-Weighted sound power levels (LWad) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 9ECMA 109).
Idle
(Fixed Disk Drives Spinning)
 
L WAd (BELS) 5.27 B
L-pAm 36.5 dBA
Operating
(Random Seeks to Fixed Disks)
 
L WAd (BELS) 5.30 B

L WAd (BELS)

36.9 dBA
Emissions Classification (EMC) FCC Rating Class B
Normative Standards CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.

HP Half-Height SATA DVD-ROM Optical Drive Disk Applicable Disk CD-ROM, CD-XA, CD-DA
(Mode 1, Mode 2, Form 1 and 2)
Photo CD (Single and Multi-session)
Mixed Mode (Audio and Data combined)
CD-R, CD-RW, DVD-ROM, DVD+R, DVD+RW
Capacity 4.7 GB (DVD-5)
8.54 GB (DVD-9)
Block Size DVD Media 2,048 bytes
Interface
SATA 1.56Gb/s
Access Times (typical) Random
<140 ms
Full-Stroke <250 ms
Data Transfer Rate Sustained
8100 to 21600 KB/s (6X to 16X)
Cache Buffer 128 KB  
Start-up Time (typical) < 7 seconds
 
Stop Time < 4 seconds
 
Laser Parameters Type
Semiconductor Laser GaA1As
Wave Length 780 ± 25 nm
Operating Conditions Temperature
41° to 113° F (5° to 45° C)
Humidity
10% to 90%
Dimensions
(HxWxD, maximum)
1.7 x 5.85 x 8.11 in (4.49 x 15.0 x 20.3 cm)
Weight 2.64 lb (1.2 kg)

HP 4 Internal Port SAS Host Bus Adapter (SAS/SATA HP Model)
(SC40Ge SATA/SAS controller)
Dimensions (excluding bracket) 6.6 x 2.5 x 0.6 in (16.8 x 6.4 x 1.6 cm)
Disk Drive and Enclosure Protocol Support 3 Gbps SAS (Serial Attached SCSI)
1.5 Gbps SATA (Serial Advanced Technology Attachment)
Architecture 64-bit
SAS Connectors 1 internal SFF8484 x4 Wide SAS Connectors
12 Gbps per x4 Wide SAS Port (4 x 3 Gbps)
Data Transfer Method PCI-Express x8 - 2 GB/s maximum bandwidth
PCI Bus Speed PCI-Express x8
Simultaneous Drive Transfer Ports 1 x4 Wide SAS Connectors
Port Transfer Rate 12 Gb/s per x4 Wide SAS Port (4 x 3 Gb/s)
Software upgradeable Firmware Yes
Maximum Capacity 1.2TB (4 x 300GB)
Memory Addressing 64-bit, supporting servers memory greater than 4 GB
Logical Drives Supported Up to 2 Logical Volumes
Up to 10 drives total in all RAID volumes
Up to 2 Drives per RAID 1
Up to 4 Drives per RAID 0
RAID Support RAID 1 (Mirroring)
RAID 0 (Striping)
Upgradeable Firmware 4-MB flashable ROM
Disk Drive and Enclosure Protocol Support 3 Gbps SAS and 1.5 Gbps SATA

HP E200/128 BBWC Smart Array Controller (Performance Model) Dimensions (excluding bracket) 6.6 x 2.5 x 0.6 in (16.8 x 6.4 x 1.6 cm)
Disk Drive and Enclosure Protocol Support 3 Gbps SAS (Serial Attached SCSI)
1.5 Gbps SATA (Serial Advanced Technology Attachment)
Architecture 64-bit
SAS Connectors 2 internal SFF8484 x4 Wide SAS Connectors
12 Gbps per x4 Wide SAS Port (4 x 3 Gbps)
Data Transfer Method PCI-Express x8 - 2 GB/s maximum bandwidth
PCI Bus Speed PCI-Express x8
Simultaneous Drive Transfer Ports 2 x4 Wide SAS Connectors
Port Transfer Rate 12 Gb/s per x4 Wide SAS Port (4 x 3 Gb/s)
Software upgradeable Firmware Yes
Maximum Capacity 2.4TB (8 x 300GB)
Memory Addressing 64-bit, supporting servers memory greater than 4 GB
Logical Drives Supported <FILL IN>
RAID Support RAID 1 (Mirroring)
RAID 0 (Striping)
RAID 5
Upgradeable Firmware 4-MB flashable ROM
Disk Drive and Enclosure Protocol Support 3 Gbps SAS and 1.5 Gbps SATA

Embedded NC105i PCIe Gigabit Server Adapter (Embedded) Network Interface
Integrated 10/100/1000BASE-T Transceiver
Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver.
Data Transfer Method
Compliant to x1 PCIe Specification
Network Transfer Rate
10Base-T (Half-Duplex) 10 Mb/s
10Base-T (Full-Duplex) 20 Mb/s
100Base-TX (Half-Duplex) 100 Mb/s
100Base-TX (Full-Duplex) 200 Mb/s
1000Base-TX (Half and Full-Duplex) 2000Mb/s
Connector
RJ-45 connector
Cable Support Performs all the physical layer functions for 10BASE-T, 100BASE-T, and 1000BASE-T Ethernet on standard Category 5 UTP

HP Embedded SATA RAID Controller Dimensions N/A (embedded)
Disk Drive and Enclosure Protocol Support 1.5 Gbps SATA
Architecture 64-bit
SAS Connectors 4 internal x1 SATA connectors
Software Upgradeable Firmware Yes
Maximum Capacity 2TB
Memory Addressing 6GB (maximum)
Logical Drives Supported 2 (maximum)
RAID Support RAID 1 (Mirroring)
RAID 0 (Striping)
RAID 10

Environment-friendly Products and Approach End-of-life Management and Recycling

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.


© Copyright 2009 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.


   DA-12901 13 - Version 13 - July 17, 2009 --- Retired on July 31, 2009