|
|
Overview
|
HP ProLiant ML150 Generation 5 (G5) | |||
| ![]() | ||
| Front View: | Rear View: | ||
| 1. | Power Supply | 1. | Mouse Port |
| 2. | Processor Air Duct | 2. | Keyboard Port |
| 3. | Six Expansion Slots | 3. | Serial Port |
| 4. | Main System Board | 4. | Monitor Port |
| 5. | Front System Fan | 5. | USB Port |
| 6. | Hard Drive Bays (up to 8) | 6. | Network Port |
| 7. | DVD-ROM Drive | 7. | Dedicated LO100 LAN Management Port |
| 8. | Lockable Bezel | 8. | Power Supply |
| What's New |
|
| |
| At A Glance |
|
|
|
Standard Features
| NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://ccesalewspr02.cce.hp.com/docfiles/concentra/604671239/4AA1-7091ENW.pdf | |
| Processor One of the following depending on configuration |
Dual-Core Intel® Xeon® processor E5205 (1.86 GHz, 1066FSB, 65W) |
| Quad-Core Intel® Xeon® processor E5405 (2.0 GHz,1333 FSB, 80W) | |
| Quad-Core Intel® Xeon® processor E5410 (2.33 GHz,1333 FSB, 80W) | |
| Quad-Core Intel® Xeon® processor E5420 (2.50 GHz,1333 FSB, 80W) | |
| Quad-Core Intel® Xeon® processor E5430 (2.66 GHz,1333 FSB, 80W) | |
| Quad-Core Intel® Xeon® processor E5440 (2.83 GHz, 1333 FSB, 80W) | |
|
|
|
| Cache Memory | Integrated 1 x 6 MB level 2 cache (E5200 sequence) |
| Integrated 2 x 6 MB level 2 cache (E5400 sequence) | |
|
| |
| Upgradeability | Upgradeable to two processors (Dual or Quad-Core) |
| NOTE: Please contact your regional sales support | |
| NOTE: Future upgradeable to Xeon® Series 5400/5300 Quad-Core processors (Please contact your regional sales support to determine quad core upgradeability. Some of the earlier shipping models may not support this upgrade). 5100 Dual-Core models are not upgradeable to the 5200 Dual-Core processors. | |
|
|
|
| Chipset | Intel® 5100 Chipset |
|
|
|
| Memory | Type | PC2-5300 Registered Buffered DIMMs (DDR2-667) |
| Standard for NHP SATA Models | 1 GB | |
| Standard for HP SAS/SATA Model and Performance Model | 2 GB | |
| Maximum | 16 GB | |
|
|
||
| Network Controller | Embedded HP NC105i PCI Express Gigabit Server Adapter 10/100/1000 WOL (Wake on LAN) |
|
|
|
| Expansion Slots # | Technology |
Bus Width
|
Connector Width
|
Bus Number*
|
Form Factor
|
Notes
|
| 1 |
32-bit/33MHz PCI |
N/A
|
N/A
|
0x0A
|
Full length, full height slot
|
Non Hot-plug
|
| 2 |
PCI-Express (Gen 1) |
x4
|
X8
|
0x03
|
Full length, full height slot
|
Non Hot-plug
|
| 3 |
PCI-Express (Gen 1) |
X4
|
X8
|
0x05
|
Full length, full height slot
|
Non Hot-plug
|
| 4 |
PCI-Express (Gen 1) |
X4
|
X8
|
0x01
|
Full length, full height slot
|
Non Hot-plug
|
| 5 |
PC-Express (Gen 1) |
X8
|
X8
|
0x02
|
Full length, full height slot
|
Non Hot-plug
|
| 6 | PCI-Express (Gen 1) |
X8
|
X8
|
0x09
|
Full length, full height slot
|
Non Hot-plug
|
|
|
||||||
| Storage Controller | SATA/SAS Model | HP Embedded SATA RAID Controller
HP SAS SC40Ge PCI Express to 4-Port SATA/SAS HBA Controller NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. |
| Performance Model | HP Smart Array E200/128 BBWC SATA/SAS Controller | |
|
|
||
| Storage | Diskette Drive | None ship standard 1.44 MB USB Diskette Drive Option available |
| Optical Drive | HP Half-Height SATA DVD-ROM Optical Drive | |
| Hard Drives | None ship standard SAS and SATA hard drive options are available One 160GB Non-Hot Plug HDD for Non-Hot Plug BTO models |
|
|
|
||
| Maximum Internal Storage | SATA | 8.0TB (8 x 1TB) SATA (With optional SAS controller) |
| SAS | 8.0TB (8 x 1TB) SAS (With optional SAS controllers) | |
| NOTE: The Embedded SATA RAID controller support for a single logical drive is limited to 2TB. | ||
| | ||
| Interfaces | Parallel | 0 |
| Serial | 1 | |
| Pointing Device (Mouse, PS2) | 1 | |
| Graphics | 1 | |
| Keyboard (PS2) | 1 | |
| USB 2.0 Ports Dedicated USB |
8 (4 Rear, 2 Front, and 2 Internal) 1 (available for USB tape connectivity) NOTE: Please see the following URL for additional information regarding USB support: http://h18004.www1.hp.com/products/servers/platforms/usb-support.html. |
|
| Network RJ-45 (Ethernet) | 1 (10/100/1000 Gbits/s) | |
| Remote Management | 1 (10/100 via optional HP ProLiant 100 G5 Lights-Out 100c Remote Management Card | |
|
|
||
| Graphics | 32MB shared supporting 1600x1200x16M resolution |
|
| |
| Form Factor | Tower (5U) NOTE: Rack mounting available via HP Tower to Rack Conversion Tray, Universal Kit. Please see the options section in this QuickSpecs. |
|
|
|
| Industry Standard Compliance | ACPI V2.0 compliant |
| PCI 2.3 compliant | |
| PXE Support | |
| WOL Support | |
| Microsoft® Logo certifications | |
|
|
|
| Manageability | Optional HP ProLiant 100 G5
Lights-Out 100c Remote Management Card Embedded IPMI standard reporting |
|
|
|
| Security | Power-on password Setup password Diskette boot control |
|
|
|
| Server Power Cords | One Lowline NEMA power cord |
|
|
|
| Power Supply | One 650W Non-Redundant Power Supply, Non-hot plug |
| 750W Redundant Power Supply (Optional) | |
|
|
|
| System Fans | Two (2) Non-hot plug, Non-redundant system fans |
|
|
|
| Remote Management | Lights-Out 100c | Lights Out LO100c is a
Remote Management Card (RMC) for HP ProLiant 100 series servers that do not have
embedded LO100i. The LO100c has all the features of the LO100i Advanced license
and allows customers, or their service providers, to remotely manage HP ProLiant
servers over a LAN or the Internet from anywhere, anytime regardless whether the
server is located in the same building, across town, or around the globe. With LO100c, users can acquire complete remote control with Virtual KVM (graphical hardware-based, remote console). Users can also access the server's serial console, control system power, update system firmware and software, as well as monitor system environmental conditions. The LO100c remote management card can be accessed from a web browser or command line interface. This virtual "at-the-server" functionality means administrators stay in control of remote HP ProLiant 100 series servers. The HP Lights-Out100c consists of a management processor and firmware that provides cost-effective, entry-level lights-out functionality, basic system board management functions, and diagnostics. |
| NOTE:
For more information, please refer to the QuickSpecs for the LO100c found at::
http://h18004.www1.hp.com/products/servers/management/ remotemgmt/lightsout100/index.html | ||
|
| ||
| Server Management Stand Alone Software Products and ProLiant Essentials | Subscriber's Choice | Subscriber's Choice Driver and
Support Alerts/Notifications is a web-based email subscription service that
provides software and driver change notifications for ProLiant products.
Sign up at: http://www.hp.com/go/subscriberschoice and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis. |
| ROMPaq, software and latest drivers | The latest software, drivers, and firmware fully optimized and tested for your HP ProLiant server and options, available through software and drivers download pages website at: http://www.hp.com/go/support. | |
| NOTE:
Flexible and volume quantity license kits are available for ProLiant
Essentials Value Packs. Refer to: http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information. NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials. |
||
|
|
||
| OS Support |
Microsoft Windows Server 2008 |
| NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/supportos and our driver download page http://www.hp.com/support/ML150G5 | |
| NOTE: Netware 6.5 is supported with the non-RAID mode embedded SATA controller. For driver support in RAID mode with Netware 6.5, the Smart Array E200 Controller (P/N 411508-B21) or HP SC44Ge SAS PCI-E Host Bus Adapter (P/N 416096-B21) must be purchased. | |
|
|
|
| Factory Express Portfolio for Servers and Storage | HP
Factory Express offers configuration, customization, integration and deployment
services for HP servers and storage products. Customers can choose how their factory
solutions are built, tested, integrated, shipped and deployed. Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging and custom packaging to meet customer needs. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant & HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches. For more information on Factory Express services on your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express. |
| | |
| HP Enterprise Configurator |
The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance. |
|
|
|
| Service and Support | HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs. HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack. To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime. Recommended Service Simplify
ProLiant solution implementation, maintenance and management.
Enhanced
Service Optimize service level to increase IT performance and availability
Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays. For
a complete listing of service offerings and information visit: |
|
|
Models
| SAS/SATA Hot Plug Models | ||
|
Performance Model HP ML150G5 E5410 HP SATA/SAS, 2GB, (1P) Base Model HP ML150G5 E5405 HP SATA/SAS, 2GB
(1P) | Processor(s) One of the following depending on Model | (1)
Quad-Core Intel® Xeon® processor E5410 (2.33 GHz, 1333 FSB, 80W) (1) Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 1333 FSB, 80W) |
| Cache Memory One of the following depending on Model | Integrated
2 x 6 MB L 2 cache (E5400 sequence) Integrated 1 x 6 MB level 2 cache (E5200 sequence) | |
| Memory | 2 GB PC2-5300 Registered DIMMs (DDR2-667) | |
| Network Controller | Embedded HP NC105i PCI Express Gigabit Server Adapter 10/100/1000 WOL | |
| Storage Controller | SATA/SAS model: HP SC40Ge 4 Internal Port SATA/SAS Host Bus Adapter | |
| Performance model: HP E200 8 Internal Port Smart Array SAS/SATA Controller | ||
| Hard Drive | None ship standard | |
| Internal
Storage One of the following depending on Model |
SAS: 8.0TB (8 x 1TB) SATA: 8.0TB (8 x 1TB) (With optional SAS controllers and 2nd HDD Cage) |
|
| Optical Drive | HP Half-Height SATA DVD-ROM Optical Drive | |
| Form Factor | Tower standard; 5U rack via optional rack mounting kit | |
| | ||
| SATA Non-Hot Plug Models | ||
|
HP ML150G5 E5205 NHP 160GB SATA, 1GB, (1P) HP
ML150G5 E5405 NHP 160GB SATA, 1GB, (1P)
| Processor(s) One of the following depending on Model | (1) Dual-Core Intel® Xeon®
processor E5205 (1.86 GHz, 1066FSB, 65W) (1) Quad-Core Intel® Xeon® processor E5405 (2.00 GHz,1333 FSB, 80W) |
| Cache Memory | Integrated 1x6MB L 2 cache (E5200 sequence) | |
| Memory | 1 GB PC2-5300 Registered DIMMs (DDR2-667) | |
| Network Controller | Embedded HP NC105i PCI Express Gigabit Server Adapter 10/100/1000 WOL | |
| Storage Controller | HP Embedded SATA RAID Controller | |
| Hard Drive | One 160GB Non-Hot Plug HDD | |
| Internal Storage | SATA: 4.0TB (4 x 1 TB) NOTE: A Hot-plug hard drive cage can be installed into a Non-hot plug server by ordering a HBA (or Smart Attay) plus one HP 2nd LFF Hot-plug hard drive cage kit. |
|
| Optical Drive | HP Half-Height SATA DVD-ROM Optical Drive | |
| Form Factor | Tower standard; 5U rack via optional rack mounting kit | |
| NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information. | ||
|
|
Smart Buys
| The ProLiant Smart Buy program offers a collection of promotional server and option products that are configured with SMB in mind, offered at discounted prices, and positioned for quick delivery. Smart Buy server offers are available for a limited time only. | ||
|
S-BUY ML150T05 E5205 NHP |
Processor(s) | (1) Dual-Core Intel® Xeon® processor E5205 (1.86GHz, 1066FSB,65W) |
| Cache Memory | Integrated 1x6MB L 2 cache | |
| Memory | 1GB (2 X 512MB) PC2-5300 Registered DIMMs (DDR2-667), single rank | |
| Network Controller | Embedded HP NC105i PCI Express Gigabit Server Adapter 10/100/1000 WOL | |
| Storage Controller | HP Embedded SATA RAID Controller | |
| Hard Drive | (1) 160GB SATA 7.2K 3.5" Non-Hot Plug HDD | |
| Internal Storage | Up to 2.0TB (4 x 500GB) SATA | |
| Optical Drive | HP Half-Height SATA DVD-ROM Optical Drive | |
| Form Factor | Tower standard; 5U rack via optional rack mounting kit | |
|
|
||
|
S-BUY ML150T05 E5410 NHP |
Processor(s) | (1) Quad-Core Intel® Xeon® processor E5410 (2.33 GHz, 1333 FSB, 80W) |
| Cache Memory | Integrated 2x6MB L 2 cache | |
| Memory | 2 GB (2 x 1GB) PC2-5300 Registered DIMMs (DDR2-667) | |
| Network Controller | Embedded HP NC105i PCI Express Gigabit Server Adapter 10/100/1000 WOL | |
| Storage Controller | HP Embedded SATA RAID Controller | |
| Hard Drive | (2) 160GB SATA 7.2K 3.5" Non-Hot Plug HDD | |
| Internal Storage | Up to 2.0TB (4 x 500GB) SATA | |
| Optical Drive | HP Half-Height SATA DVD-ROM Optical Drive | |
| Form Factor | Tower standard; 5U rack via optional rack mounting kit | |
|
|
||
|
S-BUY ML150T05 E5430 NHP | Processor(s) | (1) Quad-Core Intel® Xeon® processor E5430 (2.66 GHz,1333 FSB, 80W) |
| Cache Memory | Integrated 2x6MB L 2 cache | |
| Memory | 2 GB (2 x 1GB) PC2-5300 Registered DIMMs (DDR2-667) | |
| Network Controller | Embedded HP NC105i PCI Express Gigabit Server Adapter 10/100/1000 WOL | |
| Storage Controller | HP Embedded SATA RAID Controller | |
| Hard Drive | (1) 250GB SATA 7.2K 3.5" Non-Hot Plug | |
| Internal Storage | Up to 4.0TB (4 x 1TB) SATA | |
| Operating System | Not included | |
| Optical Drive | HP Half-Height SATA DVD-ROM Optical Drive | |
| Form Factor | Tower standard; 5U rack via optional rack mounting kit | |
| | ||
|
S-BUY ML150T05 E5430 SBS NHP | Processor(s) | (1) Quad-Core Intel® Xeon® processor E5430 (2.66 GHz,1333 FSB, 80W) |
| Cache Memory | Integrated 2x6MB L 2 cache | |
| Memory | 2 GB (2 x 1GB) PC2-5300 Registered DIMMs (DDR2-667) | |
| Network Controller | Embedded HP NC105i PCI Express Gigabit Server Adapter 10/100/1000 WOL | |
| Storage Controller | HP Embedded SATA RAID Controller | |
| Hard Drive | (2) 250GB SATA 7.2K 3.5" Non-Hot Plug HDD | |
| Internal Storage | Up to 4.0TB (4 x 1TB) SATA | |
| Operating System | Microsoft Windows SBS 2003 R2 Standard w/5 CALs | |
| Optical Drive | HP Half-Height SATA DVD-RW | |
| Form Factor | Tower standard; 5U rack via optional rack mounting kit |
|
|
Configuration Information-Factory Integrated Models
|
NOTE: This section lists some of the
steps required to configure a Factory Integrated Model. To ensure only
valid configurations are ordered, HP recommends the use of an HP approved
configurator. Contact your local sales representative for information
on CTO product offerings and requirements. |
||
| Step 1: Base Configuration (Select only one model from the following selections) | ||
| Models | HP ProLiant ML150 G5 Non-hot Plug SATA CTO Chassis |
450290-B21
|
| Factory Integrated Models ship with: | ||
| Embedded HP NC105i PCI Express Gigabit Server Adapter 10/100/1000 WOL | ||
| Tower 5U Form Factor | ||
| HP ProLiant ML150 G5 Hot Plug SAS/SATA CTO Chassis |
450291-B21
|
|
| Factory Integrated Models ship with: | ||
| Embedded HP NC105i PCI Express Gigabit Server Adapter 10/100/1000 WOL | ||
| Tower 5U Form Factor | ||
|
|
||
| Step 2: Choose Required Options (Select only one option from each category unless otherwise noted) | ||
| Processors | Quad-Core Processor Option Kits | |
| Quad-Core Intel® Xeon® processor E5405 (2.00 GHz,1333 FSB, 80W), FIO |
455420-L21
|
|
| Quad-Core Intel® Xeon® processor E5410 (2.33 GHz,1333 FSB, 80W), FIO |
455421-L21
|
|
| Quad-Core Intel® Xeon® processor E5420 (2.50 GHz,1333 FSB, 80W), FIO |
455422-L21
|
|
| Quad-Core Intel® Xeon® processor E5430 (2.66 GHz,1333 FSB, 80W), FIO |
455423-L21
|
|
| Quad-Core Intel® Xeon® processor E5440 (2.50 GHz,1333 FSB, 80W), FIO |
455424-L21
|
|
| Dual-Core Processor Option Kits | ||
| Dual-Core Intel® Xeon® processor E5205 (1.86 GHz, 1066FSB, 65W) |
455419-L21
|
|
| Memory | 1 GB REG PC2-5300 2 x 512 MB Single Rank Kit |
408850-B21
|
| 2 GB REG PC2-5300 2 x 1 GB Single Rank Kit |
408851-B21
|
|
| 4 GB REG PC2-5300 2 x 2 GB Single Rank Kit |
461840-B21
|
|
| 8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit |
408854-B21
|
|
| Optical Drives | HP Half-Height SATA DVD-ROM Optical Drive |
447326-B21
|
| HP Half-Height SATA DVD RW Optical Drive |
447328-B21
|
|
| Hard Drives | NOTE: Required
only if P/N 450290-B21 is selected in Step 1 above. NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller. Refer to the HBA or Controller technical specifications for details. |
|
| SATA Non-Hot Plug Midline (MDL) Drives | ||
| HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD | 462595-B21 | |
| HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD | 458941-B21 | |
| HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD | 458939-B21 | |
| SATA Non-Hot Plug Entry (ETY) Drives | ||
| HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD | 458947-B21 | |
| SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives | ||
| HP 400GB 3G 10K 3.5" DP SAS ENT HDD | 508232-B21 | |
| HP 450GB 3G 15K 3.5" DP SAS ENT HDD | 454234-B21 | |
| HP 300GB 3G 15K 3.5" DP SAS ENT HDD | 417950-B21 | |
| HP 146GB 3G 15K 3.5" DP SAS ENT HDD | 417855-B21 | |
| HP 300GB SAS 15K 3.5" SP HDD | 431950-B21 | |
| HP 146GB SAS 15K 3.5" SP HD | 432093-B21 | |
| HP 72GB SAS 15K 3.5" SP HDD | 432095-B21 | |
| NOTE: If a Non-Hot Plug CTO Chassis (450290-B21) is selected in Step 1 and SAS Non-Hot- Plug drives are selected, a SAS Array Controller must also be selected. | ||
| Storage Controllers (NOTE: Only required if 450291-B21 is selected in Step 1) |
NOTE: If one of the following Smart Array Controller or SAS HBA is selected; the HP Internal SAS/SATA 4-Port Cable (P/N 457692-B21) is also required. | |
| SAS HBA | ||
| HP SC40Ge SAS HBA, FIO NOTE: RAID 0,1. NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. |
449176-B21
|
|
| HP SC44Ge SAS PCI-E Host Bus Adapter NOTE: RAID 0,1. NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS. |
416096-B21
|
|
| SCSI HBA | ||
| HP SC11Xe U320 PCI-E Host Bus Adapter |
412911-B21
|
|
| Smart Array E200 Controller | ||
| HP Smart Array E200/128 BBWC Controller |
411508-B21
|
|
| HP Internal SAS/SATA 4-Port cable |
457692-B21
|
|
| Power supply | ML150G5 650W Power Supply, FIO only |
465462-B21
|
| HP ML150G5 750W Redundant Power Supply Kit | 458310-B21 | |
|
|
||
| Step 3: Choose Additional Factory Integratable Options | ||
| Operating Systems | Pre-install Microsoft Windows 2003 Standard (English) |
409167-B21
|
| NOTE: For additional language part numbers, please visit: http://www.hp.com/go/microsoft and select 'HP & Windows OS'. | ||
|
|
||
| Step 4: Choose Additional Options for factory integration | ||
| NOTE: For additional options, please refer to the "Options" section below. Some options may not be available for factory integration. Please contact an HP sales representative for additional information. |
|
|
Options
| Unique Options | HP ML150G5 2nd LFF HP Drive Cage Kit |
458312-B21 |
| HP ML150G5 750W Redundant Power Supply Kit |
458310-B21 | |
| HP ML150G5 750W Redundant Power Supply Kit with NEMA cord |
458310-001 | |
| | ||
| Processors | Quad-Core Processor Option Kits | |
| Quad-Core Intel® Xeon® processor E5405 (2.00 GHz,1333 FSB, 80W) |
455420-B21
|
|
| Quad-Core Intel® Xeon® processor E5410 (2.33 GHz,1333 FSB, 80W) |
455421-B21
|
|
| Quad-Core Intel® Xeon® processor E5420 (2.50 GHz,1333 FSB, 80W) |
455422-B21
|
|
| Quad-Core Intel® Xeon® processor E5430 (2.66 GHz,1333 FSB, 80W) |
455423-B21
|
|
| Quad-Core Intel® Xeon® processor E5440 (2.83 GHz,1333 FSB, 80W) |
455424-B21
|
|
| Dual-Core Processor Option Kits | ||
| Dual-Core Intel® Xeon® processor E5205 (1.86 GHz, 1066FSB, 65W) |
455419-B21
|
|
|
|
||
| Memory | 1 GB REG PC2-5300 2 x 512 MB Single Rank Kit |
408850-B21 |
| 2 GB REG PC2-5300 2 x 1 GB Single Rank Kit |
408851-B21 | |
| 4 GB REG PC2-5300 2 x 2 GB Single Rank Kit |
461840-B21 | |
| 8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit |
408854-B21 | |
|
| ||
| Optical Drives | HP Half-Height SATA DVD-ROM Optical Drive |
447326-B21 |
| HP Half-Height SATA DVD RW Optical Drive |
447328-B21 | |
| | ||
| Hard Drives | NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller. Refer to the HBA or Controller technical specifications for details. | |
| SATA Non-Hot Plug Midline (MDL) Drives | ||
| HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD | 462595-B21 | |
| HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD | 458941-B21 | |
| HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD | 458939-B21 | |
| SATA Non-Hot Plug Entry (ETY) Drives | ||
| HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD | 458947-B21 | |
| SATA Hot Plug Midline (MDL) Drives | ||
| HP 1TB 3G SATA 7.2K 3.5" MDL HDD | 454146-B21 | |
| HP 750GB 3G SATA 7.2K 3.5" MDL HDD | 458930-B21 | |
| HP 500GB 3G SATA 7.2K 3.5" MDL HDD | 458928-B21 | |
| HP 250GB 3G SATA 7.2K 3.5" MDL HDD | 458926-B21 | |
| SATA Hot Plug Entry (ETY) Drives | ||
| HP 160GB 3G SATA 7.2K 3.5" ETY HDD | 458945-B21 | |
| NOTE: SATA drives
have a 1 year warranty. Please see the QuickSpecs for Technical Specifications
and additional information: http://h18000.www1.hp.com/products/quickspecs/13021_na/13021_na.html |
||
| 3.5" SATA Non-Hot Plug Drives | ||
| HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD | 411276-B21 | |
| HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD | 411275-B21 | |
| 3.5" SATA Hot Plug Drives | ||
| HP 750GB 1.5G SATA 7.2K 3.5" HDD | 432341-B21 | |
| HP 500GB 1.5G SATA 7.2K 3.5" HDD | 395473-B21 | |
| HP 250GB 1.5G SATA 7.2K 3.5" HDD | 349239-B21 | |
| HP 160GB 1.5G SATA 7.2K 3.5" HDD | 349238-B21 | |
| NOTE: The previous
generation of 1.5G SATA Non-Hot Plug hard drives are supported. These drives
can be purchased as an option, however, are no longer configurable. NOTE: SATA drives have a 1 year warranty. Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11940_na/11940_na.html |
||
| SAS Hot Plug 3.5" Midline (MDL) Drives | ||
| HP 1TB 7.2K 3.5" DP SAS MDL HDD | 461137-B21 | |
| HP 750GB 7.2K 3.5" DP SAS MDL HDD | 461135-B21 | |
| SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives | ||
| HP 400GB 3G NHP 10K 3.5" DP SAS ENT HDD | 508232-B21 | |
| HP 450GB 3G NHP 15K 3.5" DP SAS ENT HDD | 454234-B21 | |
| HP 300GB 3G NHP 15K 3.5" DP SAS ENT HDD |
417950-B21
|
|
| HP 146GB 3G NHP 15K 3.5" DP SAS ENT HDD |
417855-B21
|
|
| HP 300GB SAS 15K 3.5" SP HDD |
431950-B21
|
|
| HP 146GB SAS 15K 3.5" SP HD |
432093-B21
|
|
| HP 72GB SAS 15K 3.5" SP HDD |
432095-B21
|
|
| NOTE: SAS hard drives require a SAS HBA or Smart Array Controller. | ||
| NOTE: SAS non-hot plug drives will also require the HP Internal SAS/SATA 4-Port cable (P/N 457692-B21) | ||
| SAS Hot Plug 3.5" Enterprise (ENT) Drives | ||
| HP 400GB 3G SAS 10K 3.5" DP HDD | 459508-B21 | |
| HP 450GB 3G SAS 15K 3.5" DP HDD | 454232-B21 | |
| HP 300GB 3G SAS 15K 3.5" SP HDD | 431944-B21 | |
| HP 300GB 3G SAS 15K 3.5" DP HDD | 416127-B21 | |
| HP 146GB 3G SAS 15K 3.5" SP HDD | 375872-B21 | |
| HP 146GB 3G SAS 15K 3.5" DP HDD | 384854-B21 | |
| HP 72GB 3G SAS 15K 3.5" SP HDD | 375870-B21 | |
| HP 72GB 3G SAS 15K 3.5" DP HDD | 384852-B21 | |
| NOTE: SAS hard drives require a SAS HBA or Smart Array Controller. | ||
| NOTE: SAS non-hot
plug drives will also require the HP Internal SAS/SATA 4-Port cable (P/N
457692-B21) NOTE: SATA drives have a 1 year warranty. Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html |
||
|
|
||
| Storage Controllers | SAS HBA | |
| HP SC44Ge SAS PCI-E Host Bus Adapter NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS. |
416096-B21 | |
| SCSI HBA | ||
| HP SC11Xe U320 PCI-E Host Bus Adapter | 412911-B21 | |
| Smart Array E200 Controller | ||
| HP Smart Array E200/128 BBWC Controller | 411508-B21 | |
| HP Internal SAS/SATA 4-Port Cable NOTE: This cable is required when adding either the HP SC44Ge HBA (P/N 416096-B21) or the HP Smart Array E200 (P/N 411508-B21) on Non-Hot Plug SATA server models. |
457692-B21 | |
| NOTE: Please see
the following QuickSpecs for Technical Specifications and additional information:
http://h18004.www1.hp.com/products/quickspecs/12617_na/12617_na.html (SC44Ge HBA) http://h18000.www1.hp.com/products/quickspecs/12566_na/12566_na.html (SC11Xe HBA) http://h18000.www1.hp.com/products/quickspecs/12460_na/12460_na.html (Smart Array E200 Controller) |
||
|
|
||
| Communications | HP NC110T PCI Express Gigabit Server Adapter |
434905-B21
|
| HP NC360T PCI Express Dual Port Gigabit Server Adapter |
412648-B21
|
|
| HP NC364T PCI Express Quad Port Gigabit Server Adapter |
435508-B21
|
|
| HP NC373F PCI Express Multifunction Gigabit Server Adapter |
394793-B21
|
|
| v90 56K PCI Modem US (with specific modem cable) RoHS |
EK694AA
|
|
| NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs | ||
|
|
||
| Remote Management | HP ProLiant 100 G5 Lights-Out 100c Remote Management Card |
445513-B21
|
|
|
||
| Tape Drives | NOTE: Installation of SCSI internal tape drives in a ML150 model requires SCSI controller kit (PN 412911-B21). | |
| NOTE: For complete listing of tape drive offerings see: http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html | ||
| DAT USB Tape Drives | ||
| HP StorageWorks DAT 40 USB Internal Tape Drive (Carbonite) |
DW022A
|
|
| HP StorageWorks DAT 72 USB Internal Tape Drive (Carbonite) |
DW026A
|
|
| DAT SCSI Tape Drives | ||
| HP StorageWorks DAT 40 SCSI Internal Tape Drive (Carbon) |
C5686C
|
|
| HP StorageWorks DAT 72 SCSI Internal Tape Drive (Carbon) |
Q1522B
|
|
| HP StorageWorks DAT 160 SCSI Internal Tape Drive |
Q1573A
|
|
| LTO Ultrium Tape Drives | ||
| HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive |
DW085A
|
|
| HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive |
EH847A
|
|
|
|
||
| Disk-Based Backup | RDX Removable Disk Backup | |
| HP RDX160 Internal Removable Disk
Backup System NOTE: 160GB of Disk Storage |
AJ765A |
|
| HP RDX320 Internal Removable Disk
Backup System NOTE: 320GB of Disk Storage |
AJ767A
|
|
| HP RDX500 Internal Removable Disk
Backup System NOTE: 500GB of Disk Storage |
AJ934A | |
| NOTE: Please see
the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13036_na/13036_na.html |
||
| D2D Backup | ||
| HP StorageWorks D2D120 Backup
System with Data Protector Express Software Kit NOTE: 2TB of Disk Storage |
EH924A
|
|
| HP StorageWorks D2D130 Backup
System with LTO-3 Ultrium 920 SAS Tape Drive NOTE: 3TB of Disk Storage |
EH952A | |
| NOTE: Please see the HP D2D Backup Systems QuickSpecs for additional information: http://www.hp.com/go/d2d | ||
|
|
||
| Uninterruptible Power Systems - Tower | HP T1500 G3 UPS Models | |
| HP T1500 G3 UPS |
AF450A
|
|
| HP T1000 G3 UPS Models | ||
| HP T1000 G3 UPS | AF448A | |
| HP T1000 G2 UPS | ||
| NOTE: Please see QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13160_na/13160_na.html | ||
| HP T750 UPS | ||
| HP T750 UPS, Low Voltage | 378439-D71 | |
| NOTE: Please see QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12192_na/12912_na.html | ||
|
|
||
| Installation of Server into Racks | HP Tower to Rack Conversion Tray, Universal Kit |
417705-B21
|
|
|
||
| HP KVM Switch Options | IP Console Switch with Virtual Media (KVM/IP), 4x1x16 |
AF602A
|
| IP Console Switch with Virtual Media (KVM/IP), 2x1x16 |
AF601A
|
|
| Server Console Switch with Virtual Media (KVM), 0x2x16 |
AF600A
|
|
| PS2 Virtual Media Interface Adapter,
1 Pack NOTE: The AF604A is only compatible with the Console Switches with Virtual Media |
AF604A
|
|
| PS/2 Interface Adapter, 1 pack |
262588-B21
|
|
| PS/2 Interface Adapter, 8 pack |
262587-B21
|
|
| NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches. Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm. | ||
| HP 1x4 Console Switch |
AF611A
|
|
| HP PS2 Server Console Cable, 6 foot, 2-Pack |
AF612A
|
|
| HP USB Server Console Cable, 6
foot, 2-Pack NOTE: required for supporting USB peripherals. |
AF613A
|
|
| NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm. | ||
|
|
||
| HP Rack 10000 G2
Series (Carbon/Graphite Metallic) |
10642 G2 (42U) Rack Cabinet 1200mm Deep - Shock Pallet |
AF034A
|
| 10642 G2 (42U) Rack Cabinet 1200mm Deep - Pallet |
AF038A
|
|
| 10647 G2 (47U) Rack Cabinet 1200mm Deep - Shock Pallet |
AF044A
|
|
| 10647 G2 (47U) Rack Cabinet 1200mm Deep - Pallet |
AF045A
|
|
| NOTE: It is mandatory to use a shock pallet when shipping racks with equipment installed. | ||
| NOTE: Please see
the Rack 10000 G2 QuickSpecs for Technical Specifications such as height,
width, depth, weight, and color: http://h18000.www1.hp.com/products/quickspecs/12402_na/12402_na.html |
||
| NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.hp.com/go/rackandpower. | ||
|
|
||
| USB Options | HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver) |
DC172B
|
| HP USB 04 Standard Keyboard |
DT528A#ABA
|
|
| HP 1GB USB 2.0 Floppy Drive Key |
442085-B21
|
|
| USB Floppy Drive, External |
DC361B
|
|
| NOTE: For the installation of Windows and other OS's, a floppy drive or the HP USB Floppy Drive Key may be required to complete driver installation. A standard USB drive key may not work to complete driver installation | ||
|
|
||
| Service
and Support Offerings (HP Care Pack Services) | Support Service | |
| Next Business Day On-Site Service, 9-Hour x 5-Day Coverage, 3 Years, Electronic |
U8184E | |
| Same Business Date On-Site Service 13-Hour x 5-Day Coverage, 3 Years, Electronic |
U8192E | |
| Deployment Services | ||
| Hardware Installation, Electronic (install services) |
U8195E | |
| NOTE: For more information, customer/resellers can contact: http://www.hp.com/services/carepack. |
|
|
Memory
|
NOTE: Memory configurations listed do not apply to "Factory Integrated Models". HP ProLiant ML150 Generation 5 Server DIMM Installation Guidelines: 1. Slot 1 only; slots 1 and 2 only (pairs must
be of the same size) Standard Memory Standard Memory Replaced with Optional Memory |
| Dual Rank Memory Options | |||||||
|
Memory
|
Slot
|
||||||
|
|
1A
|
2A
|
3B
|
4B
|
5C
|
6C
|
|
| DR | DR | ||||||
| DR | DR | DR | DR | ||||
|
Standard
|
2 GB
|
1 GB
|
1 GB
|
Empty
|
Empty
|
Empty
|
Empty
|
|
Optional
|
10 GB
|
1 GB
|
1 GB
|
2 GB
|
2 GB
|
2 GB
|
2 GB
|
|
Maximum
|
16 GB
|
4 GB
|
4 GB
|
2 GB
|
2 GB
|
2 GB
|
2 GB
|
| Dual Rank & Single Rank Memory Options | |||||||
|
Memory
|
Slot
|
||||||
|
|
1A
(Dual/Single Rank) |
2A
(Dual/Single Rank) |
3B
(Dual/Single Rank) |
4B
(Dual/Single Rank) |
5C
(Single Rank) |
6C
(Single Rank) |
|
| DR | DR | ||||||
| DR | DR | SR | SR | ||||
| DR | DR | SR | SR | SR | SR | ||
| DR | DR | DR | DR | ||||
|
Standard
|
1 GB
|
512 MB
|
512 MB
|
Empty
|
Empty
|
Empty
|
Empty
|
|
Optional
|
9 GB
|
512 MB
|
512 MB
|
2 GB
|
2 GB
|
2 GB
|
2 GB
|
|
Maximum
|
16 GB
|
4 GB
|
4 GB
|
2 GB
|
2 GB
|
2 GB
|
2 GB
|
| NOTE: Please ensure socket 1 is populated, otherwise the system will not boot. Install memory in balanced pairs (see memory options) for best performance. | |
| Following are memory options available from HP: | |
| 1 GB PC2-5300 DDR2 2 x 512 MB Single Rank Kit |
408850-B21
|
| 2 GB PC2-5300 DDR2 2 x 1 GB Single Rank Kit |
408851-B21
|
| 4 GB PC2-5300 DDR2 2 x 2 GB Single Rank Kit |
461840-B21
|
| 8 GB PC2-5300 DDR2 2 x 4 GB Dual Rank Kit |
408854-B21
|
|
|
Storage
| Non-Hot Plug SATA or Hot Plug SAS/SATA | ||
![]() |
1 | 16x SATA DVD-ROM |
| 2 | Removable Media Bay with EMI Shield | |
| 3 | Thermal Sensor | |
| 4 | USB Port | |
| 5 | Four/Eight Hot Plug SAS/SATA or Four Non-Hot Plug SATA Drive Bays | |
| Drive Support | |||
|
Quantity Supported |
Position Supported |
Controller | |
| Removable Media | |||
| SATA DVD-ROM Drive | Up
to 1 | 1 | SATA |
| | |||
| Hard Drives | |||
| SAS Hot Plug 3.5" Enterprise (ENT) Drives | |||
|
Quantity
Supported |
Position
Supported |
Controller |
|
| 450GB 3G SAS 15K 400GB 3G SAS 10K 300GB 3G SAS 15K 146GB 3G SAS 15K 72GB 3G SAS 15K |
Up to 8
|
5
(Drive slots 1-8) |
LSI SATA/SAS SC40Ge PCI Express
to 4-Port Controller Smart Array E200 SATA/SAS Controller Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter |
| SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives | |||
|
Quantity
Supported |
Position
Supported |
Controller |
|
| 400GB 3G SAS 10K 450GB 3G SAS 15K 300GB 3G SAS 15K 146GB 3G SAS 15K 72GB 3G SAS 15K |
Up to 8 | 5 (Drive slots 1-8) |
LSI SATA/SAS SC40Ge PCI Express
to 4-Port Controller Smart Array E200 SATA/SAS Controller Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter |
| SAS Hot Plug 3.5" Midline (MDL) Drives | |||
|
Quantity
Supported |
Position
Supported |
Controller | |
| 1TB 3G SAS 7.2K 750GB 3G SAS 7.2K |
Up to 8 | 5 (Drive slots 1-4) |
Embedded 4 port SATA Controller
(for HP SATA models) LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller Smart Array E200 SATA/SAS Controller Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter |
| Hard Drives NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller. Refer to the HBA or Controller technical specifications for details. |
|||
| SATA Hot Plug Midline (MDL) Drives (3.5") | |||
| Quantity Supported |
Position Supported |
Controller |
|
| 1TB 3G SATA 7.2K 750GB 3G SATA 7.2K 500GB 3G SATA 7.2K 250GB 3G SATA 7.2K |
Up to 8
|
5
(Drive slots 1-4) |
Embedded 4 port SATA Controller
(for HP SATA models) LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller Smart Array E200 SATA/SAS Controller Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. |
| SATA Hot Plug Entry (ETY) Drives (3.5") | |||
| Quantity Supported |
Position Supported |
Controller |
|
| 160GB 3G SATA 7.2K |
Up to 8
|
5
(Drive slots 1-4) |
Embedded 4 port SATA Controller
(for HP SATA models) LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller Smart Array E200 SATA/SAS Controller Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. |
| SATA Non-Hot Plug Midline (MDL) 3.5" | |||
| Quantity Supported |
Position Supported |
Controller |
|
| 750GB 3G SATA15K 500GB 3G SATA 15K 250GB 3G SATA 15K |
Up to 8 | 5 (Drive slots 1-4) |
Embedded 4 port SATA Controller
(for HP SATA models) LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller Smart Array E200 SATA/SAS Controller Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. |
| SATA Non-Hot Plug Entry (ETY) | |||
| Quantity Supported |
Position Supported |
Controller |
|
| 160GB 3G SATA 15K | Up to 8 | 5 (Drive slots 1-4) |
Embedded 4 port SATA Controller
(for HP SATA models) LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller Smart Array E200 SATA/SAS Controller Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. |
| 3.5" SATA Non-Hot Plug Drives | |||
| Quantity Supported |
Position Supported |
Controller |
|
| 250GB 1.5G SATA 7.2K 160GB 1.5G SATA 7.2K |
Up to 8 | 5 (Drive slots 1-4) |
Embedded 4 port SATA Controller
(for HP SATA models) LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller Smart Array E200 SATA/SAS Controller Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. |
| 3.5" SATA Non-Hot Plug Drives | |||
| Quantity Supported |
Position Supported |
Controller |
|
| 750GB 1.5G SATA 7.2K 500GB 1.5G SATA 7.2K 250GB 1.5G SATA 7.2K |
Up to 8 | 5 (Drive slots 1-4) |
Embedded 4 port SATA Controller
(for HP SATA models) LSI SATA/SAS SC40Ge PCI Express to 4-Port Controller Smart Array E200 SATA/SAS Controller Optional HP SC44Ge SATA/SAS PCI-E Host Bus Adapter NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. |
|
|
|||
| NOTE: To support 8 drives, the purchase of the optional HP HDD cage and possibly purchase a second SATA/SAS controller for 8 port support are required. | |
| Maximum Storage Capacity SAS Models | |
| Internal | 8.0TB (8 x 1TB SAS hard drives) |
| Total | 8.0TB (8 x 1TB SAS hard drives) |
| Maximum Storage Capacity SATA Models | |
| Internal | 8.0TB (8 x 1TB SATA drives) |
| Total | 8.0TB (8 x 1TB SATA drives) |
|
|
|
| Tape and Disk-Based Backup |
| NOTE: Installation
of SCSI tape drives in a ML150 G5 model requires SCSI controller kit (PN:
412911-B21). NOTE: For a complete listing of compatible tape and disk-based backup offerings, please visit: http://www.hp.com/go/connect. |
|
Position
Supported |
Controller
|
Controller/HBA Option Kit Part Number
|
|
| Internal USB Tape Drives DAT 40 USB DAT 72 USB DAT 160 USB |
2
|
USB 2.0 port
|
N/A
|
| External USB Tape Drives DAT 40 USB DAT 72 USB DAT 160 USB |
External
|
USB 2.0 port
|
N/A
|
| Internal SCSI Tape Drives DAT 40 DAT 72 DAT 160 |
2
|
HP SC11Xe Host Bus Adapter
|
412911-B21
|
| External SCSI Tape Drives DAT 40 DAT 72 DAT 160 |
External
|
HP SC11Xe Host Bus Adapter |
412911-B21
|
| Internal SAS Tape Drives LTO-2 Ultrium 448 SAS LTO-3 Ultrium 920 SAS |
2 | HP SC44Ge Host Bus Adapter | 416096-B21 |
| External SAS Tape Drives LTO-2 Ultrium 448 SAS LTO-3 Ultrium 920 SAS |
External | HP SC44Ge Host Bus Adapter | 416096-B21 |
| HP StorageWorks
D2D Backup Systems D2D120 D2D130 |
External
|
Embedded Network Controller
|
N/A
|
| HP StorageWorks
Removable Disk Backup System, Internal RDX160 RDX320 RDX500 |
2 | USB 2.0 port | N/A |
|
|
Power Specifications
| Part Number | 459558-001 |
| Spare Kit | 461512-001 |
| Operational Input Voltage Range (Vrms) | 90 to 135 and 180 to 264 V ac full ranging |
| Frequency Range (Nominal) (Hz) | 47 to 66 Hz |
| Nominal Input Voltage (Vrms) |
100
|
115
|
208
|
220
|
230
|
240
|
| Max Rated Output Wattage Rating |
600
|
600
|
600
|
600
|
600
|
600
|
| Nominal Input Current (A rms) |
10
|
10
|
5
|
5
|
5
|
5
|
| Max Rated Input Wattage Rating (Watts) |
800
|
780
|
760
|
750
|
750
|
750
|
| Max. Rated VA (Volt-Amp) |
842.10
|
821.05
|
844.44
|
833.33
|
833.33
|
833.33
|
| Efficiency (%) |
75
|
77
|
79
|
80
|
80
|
80
|
| Power Factor |
0.95
|
0.95
|
0.9
|
0.9
|
0.9
|
0.9
|
| Leakage Current (mA) |
3.5mA
|
3.5mA
|
3.5mA
|
3.5mA
|
3.5mA
|
3.5mA
|
| Maximum Inrush Current (A peak) |
50
|
50
|
50
|
50
|
50
|
50
|
| Maximum Inrush Current duration (mS) |
3
|
3
|
3
|
3
|
3
|
3
|
| System Specifications |
|
Power**
|
|
| HP ProLiant ML150 G5 Fully Configured |
(see**)
|
| Fully Loaded System Input Wattage (W) |
630W
|
| Fully Loaded System Input Current (A rms) |
6A @ 115V, 3A @ 230V
|
| Fully Loaded System Thermal (BTU- Hr)r) |
1794 BTU (526W)
|
| Fully Loaded System VA (Volt-Amp) |
630
|
| System Leakage with all power supplies loaded (mA) |
3.5mA
|
| System Inrush Current with all power supplies loaded (A) |
50A
|
| Power cord requirements |
Nema 5-15P to IEC320-C13
|
|
IEC320-C13 to IEC320-C14
|
|
| **Power shown is for a fully configured system consisting of | |
| (2) CPU (4) double-sided DIMMs (6) HDDs SAS/SATA (1) DVD-ROM (3) x4 PCI-E (2) x8 PCI-E (1) PCI 32 3.3V (1) Lights-Out Remote Management (1) 650 watts power supply |
| Power Cords (13 Cord Sets) |
|
|
Power Cord Part Number
|
|
| 121565-001 |
|
|
Technical Specifications
| System Unit | Dimensions (HxWxD) | 7.87 x 16.7 x 24.28 in (20 x 42.4 x 61.68 cm) | |
| Weight (approximate) | Maximum: (All hard drives, power supplies and processors installed) |
60.96 lb (27.65 kg) | |
| Minimum: (One hard drive, power supply and processor installed) |
40.9 lb (18.55 kg) | ||
| Input Requirements (per power supply) |
Range Input Voltage | 90 to 135 VAC 180 to 265 VAC |
|
| Normal Line Voltage | 100 to 127 VAC 200 to 240 VAC |
||
| Rated Input Current | load 11.6A at 100 to 127 VAC 5.5A at 200 to 240 VAC |
||
| Rated Input Frequency | 47 to 66 Hz | ||
| Rated Input Power | 930 W (Max) | ||
| BTU Rating | Maximum | 2218 BTU | |
| Power Specifications | To review typical
power ratings use the Power Calculator which is available via the online
tool located at URL: http://h30099.www3.hp.com/configurator/cal/ Power%20Calculator%20Catalog.xls |
||
| Power Supply Output
Power (per power supply) |
Rated Steady-State Power | 526 W (at 100 VAC) for system 526 W (at 200 VAC) |
|
| Maximum Peak Power | 526 W (at 100 VAC) 526 W (at 200 VAC) |
||
| System Inlet Temperature | Operating | 50° to 93° F (10° to 35° C) at sea level with an altitude derating of 1.8°F per 1,000 ft (1.0° C per every 305 m) above seal level to a maximum of 10,000 ft (3050 m) no direct sustained sunlight . Maximum rate of change is 18°F/hr (10°C/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 86°F (30°C). | |
| Non-Operating | -40° to 140° F (-30° to 60° C) | ||
| Relative Humidity (non-condensing) |
Operating | 10% to 90% relative humidity (Rh), 101.7°F (38.7°C) maximum we bulb temperature, non-condensing | |
| Non-operating** | 10% to 95% relative humidity (Rh), 101.7°F (38.7°C) maximum wet bulb temperature, non-condensing. | ||
| Altitude | Operating | 10,000 ft (3000m). Maximum allowable altitude change rate is 1°C per 300m | |
| Non-Operating | 30,000 ft (9144m). Maximum allowable altitude change rate is 1°C per 300m | ||
| Acoustic Noise | Listed are the declared A-Weighted sound power levels (LWad) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 9ECMA 109). | ||
| Idle (Fixed Disk Drives Spinning) |
|||
| L WAd (BELS) | 5.27 B | ||
| L-pAm | 36.5 dBA | ||
| Operating (Random Seeks to Fixed Disks) |
|||
| L WAd (BELS) | 5.30 B | ||
|
L WAd (BELS) |
36.9 dBA | ||
| Emissions Classification (EMC) | FCC Rating | Class B | |
| Normative Standards | CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1 | ||
| NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements. | |||
|
|
|||
| HP Half-Height SATA DVD-ROM Optical Drive | Disk | Applicable Disk | CD-ROM, CD-XA, CD-DA (Mode 1, Mode 2, Form 1 and 2) |
| Photo CD (Single and Multi-session) | |||
| Mixed Mode (Audio and Data combined) | |||
| CD-R, CD-RW, DVD-ROM, DVD+R, DVD+RW | |||
| Capacity | 4.7 GB (DVD-5) | ||
| 8.54 GB (DVD-9) | |||
| Block Size | DVD Media | 2,048 bytes | |
| Interface |
SATA | 1.56Gb/s | |
| Access Times (typical) | Random |
<140 ms | |
| Full-Stroke | <250 ms | ||
| Data Transfer Rate | Sustained |
8100 to 21600 KB/s (6X to 16X) | |
| Cache Buffer | 128 KB | ||
| Start-up Time (typical) | < 7 seconds |
||
| Stop Time | < 4 seconds |
||
| Laser Parameters | Type |
Semiconductor Laser GaA1As | |
| Wave Length | 780 ± 25 nm | ||
| Operating Conditions | Temperature |
41° to 113° F (5° to 45° C) | |
| Humidity |
10% to 90% | ||
| Dimensions |
(HxWxD, maximum) |
1.7 x 5.85 x 8.11 in (4.49 x 15.0 x 20.3 cm) | |
| Weight | 2.64 lb (1.2 kg) | ||
|
|
|||
| HP 4 Internal Port SAS Host Bus Adapter | (SAS/SATA HP Model) (SC40Ge SATA/SAS controller) |
Dimensions (excluding bracket) | 6.6 x 2.5 x 0.6 in (16.8 x 6.4 x 1.6 cm) |
| Disk Drive and Enclosure Protocol Support | 3 Gbps SAS (Serial Attached SCSI) 1.5 Gbps SATA (Serial Advanced Technology Attachment) |
||
| Architecture | 64-bit | ||
| SAS Connectors | 1 internal SFF8484 x4 Wide SAS
Connectors 12 Gbps per x4 Wide SAS Port (4 x 3 Gbps) |
||
| Data Transfer Method | PCI-Express x8 - 2 GB/s maximum bandwidth | ||
| PCI Bus Speed | PCI-Express x8 | ||
| Simultaneous Drive Transfer Ports | 1 x4 Wide SAS Connectors | ||
| Port Transfer Rate | 12 Gb/s per x4 Wide SAS Port (4 x 3 Gb/s) | ||
| Software upgradeable Firmware | Yes | ||
| Maximum Capacity | 1.2TB (4 x 300GB) | ||
| Memory Addressing | 64-bit, supporting servers memory greater than 4 GB | ||
| Logical Drives Supported | Up to 2 Logical Volumes Up to 10 drives total in all RAID volumes Up to 2 Drives per RAID 1 Up to 4 Drives per RAID 0 |
||
| RAID Support | RAID 1 (Mirroring) RAID 0 (Striping) |
||
| Upgradeable Firmware | 4-MB flashable ROM | ||
| Disk Drive and Enclosure Protocol Support | 3 Gbps SAS and 1.5 Gbps SATA | ||
|
|
|||
| HP E200/128 BBWC Smart Array Controller | (Performance Model) | Dimensions (excluding bracket) | 6.6 x 2.5 x 0.6 in (16.8 x 6.4 x 1.6 cm) |
| Disk Drive and Enclosure Protocol Support | 3 Gbps SAS (Serial Attached SCSI) 1.5 Gbps SATA (Serial Advanced Technology Attachment) |
||
| Architecture | 64-bit | ||
| SAS Connectors | 2 internal SFF8484 x4 Wide SAS
Connectors 12 Gbps per x4 Wide SAS Port (4 x 3 Gbps) |
||
| Data Transfer Method | PCI-Express x8 - 2 GB/s maximum bandwidth | ||
| PCI Bus Speed | PCI-Express x8 | ||
| Simultaneous Drive Transfer Ports | 2 x4 Wide SAS Connectors | ||
| Port Transfer Rate | 12 Gb/s per x4 Wide SAS Port (4 x 3 Gb/s) | ||
| Software upgradeable Firmware | Yes | ||
| Maximum Capacity | 2.4TB (8 x 300GB) | ||
| Memory Addressing | 64-bit, supporting servers memory greater than 4 GB | ||
| Logical Drives Supported | <FILL IN> | ||
| RAID Support | RAID 1 (Mirroring) RAID 0 (Striping) RAID 5 |
||
| Upgradeable Firmware | 4-MB flashable ROM | ||
| Disk Drive and Enclosure Protocol Support | 3 Gbps SAS and 1.5 Gbps SATA | ||
|
|
|||
| Embedded NC105i PCIe Gigabit Server Adapter (Embedded) | Network Interface |
Integrated 10/100/1000BASE-T
Transceiver Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver. |
|
| Data Transfer Method |
Compliant to x1 PCIe Specification | ||
| Network Transfer
Rate |
10Base-T (Half-Duplex) | 10 Mb/s | |
| 10Base-T (Full-Duplex) | 20 Mb/s | ||
| 100Base-TX (Half-Duplex) | 100 Mb/s | ||
| 100Base-TX (Full-Duplex) | 200 Mb/s | ||
| 1000Base-TX (Half and Full-Duplex) | 2000Mb/s | ||
| Connector |
RJ-45 connector | ||
| Cable Support | Performs all the physical layer functions for 10BASE-T, 100BASE-T, and 1000BASE-T Ethernet on standard Category 5 UTP | ||
|
|
|||
| HP Embedded SATA RAID Controller | Dimensions | N/A (embedded) |
| Disk Drive and Enclosure Protocol Support | 1.5 Gbps SATA | |
| Architecture | 64-bit | |
| SAS Connectors | 4 internal x1 SATA connectors | |
| Software Upgradeable Firmware | Yes | |
| Maximum Capacity | 2TB | |
| Memory Addressing | 6GB (maximum) | |
| Logical Drives Supported | 2 (maximum) | |
| RAID Support | RAID 1 (Mirroring) RAID 0 (Striping) RAID 10 |
|
|
|
||
| Environment-friendly Products and Approach | End-of-life Management and Recycling |
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment. |
|
|
||
|
© Copyright 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less. |