contents
 Overview      Standard Features      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Overview

HP ProLiant DL180 Generation 5 (G5)

Front View: Rear View:
1. Access panel
1.
Power Supply Cable Socket
2. Front LED Indicators
2.
T-15/T-10 Screwdriver
3. Power on/off
3.
Thumbscrew For Top Cover
4. Optional DVD-RW or DVD-ROM drive
4.
Low Profile Card Slot
5. Front USB Ports (2)
5.
PCI Expansion Card Slot
6. Non-Hot plug Non redundant fans (4 fans)
6.
Thumbscrew For PCI Cage
7. Air Baffle
7.
HP LO100c Management Card Port (Optional)
8. PCI Cage
8.
LAN Port
9. System Board
9.
4 USB 2.0 Ports
   
10.
UID LED Button
   
11.
Serial Port
   
12.
VGA Port
   
13.
PS/2 Mouse Port (green)
   
14.
PS/2 Keyboard Port (purple)

What's New
  • Support for Intel® Xeon® processors: L5420 and L5410
  • Support for SATA/SAS Hot Plug Enterprise(ENT)/Midline (MDL) Hard Drives
  • Support for Hot Plug Power Supplies

At A Glance
The HP ProLiant DL180 G5 is a low cost high capacity storage optimized 2-way server, that delivers on a history of design excellence and 2U density for a variety of rack deployments and applications.
  • Processors:
    • Supports up to two Quad-Core Intel® Xeon® processors: 5400 sequence with 12MB Level 2 cache
    • Intel® 5100 Chipset
  • Memory:
    • Up to 16 GB of memory supported by six (6) PC2-5300 (667 MHz) DDR2 memory slots
  • Internal Drive Support:
    • Supports up to twelve via CTO with controller or up to eight via BTO:
      • Hot Plug Serial ATA (SATA) 3.5"hard drives; or
      • Hot Plug Serial Attached SCSI (SAS) 3.5"hard drives
        NOTE: Hot Plug and SAS functionality requires the addition of Smart Array or HBA controller. 12 hard drive support requires a 4-port SAS controller that supports expanders.
    • Internal storage capacity:
      • SATA Models: Up to 12.0TB (12 x 1TB Hot Plug 3.5" hard drives)
      • SAS Model: Up to 12.0TB (12 x 1TB Hot Plug 3.5" hard drives)
  • Network Controller:
    • One integrated NC105i PCI-e Gigabit NIC (embedded) (Wake on LAN and PXE capable)
  • Storage Controllers:
    • HP Embedded SATA RAID Controller (up to 4 hard drive support on base models)
  • Expansion Slots:
    • One available Low Profile x8 PCI-Express slot using a Low profile Riser.
    • Two Full Height/ Full Length Riser options
      • Option1: 2 full-length/full-height PCI-Express x8 connector slots (x4 electrical - Standard)
      • Option2: full-length/full-height riser with 2 PCI-X Slots(Optional)
  • Management:
    • Optional HP Lights Out 100c Remote Management card with Virtual KVM and Virtual Media support (includes IPMI2.0 and SMASH support)
  • USB Ports:
    • Seven USB ports (2) front, (4) rear, (1) internal
  • Optical Drive:
    • Support for one:
      • Optional Multi-bay DVD
      • Optional Floppy (USB only, USB key)
  • Power Supply:
    • 750W Power Supply (Optional Redundancy Hot Plug, Autoswitching) CSCI 2007/8
    • 1200W High Efficiency Power Supply (Optional Redundancy Hot Plug, Autoswitching) (Optional) CSCI 2007/8
      • NOTE: Climate Savers Computing Initiative, 2007-2008 Compliant
  • Form Factor:
    • 2U rack models
  • Deployment/Serviceability:
    • Tooled access to all system components for easy in rack serviceability
    • Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
  • Warranty:
    • This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase (3-1-1 warranty in AP and Brazil). Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives have a one-year warranty.
    • NOTE: Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year (3-1-1-in AP and Brazil) Onsite support (3-1-1-in AP and Brazil) with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
contents
 Overview      Standard Features      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Standard Features

NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA1-2747EEW.pdf
NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated Models" section.
Processor
One of the following depending on Model
Quad-Core Intel® Xeon® processor L5420 (2.50 GHz, 50W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor L5410 (2.33 GHz, 50W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor E5440 (2.83 GHz, 80W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor E5420 (2.50 GHz, 80W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333MHz FSB)
Dual-Core Intel® Xeon® processor E5205 (1.86 GHz, 65W, 1066MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.

Upgradeability Upgradeable to two processors

ChipsetIntel® 5100 Chipset

Cache Memory 12MB (2 x 6MB) Level 2 cache (5400 sequence)

Memory ProtectionRegistered Advanced ECC memory

Memory

TypePC2-5300 DIMMs (DDR2-667)
Standard1 GB(1 x 1 GB)
Maximum16 GB (2 x 4 GB) + (4 X 2 GB)
Two 4 GB DIMMs should be populated in sockets 1 and 2 first (the right most sockets when looking from the front of the chassis) - sockets 4 through 6 should be populated with 2 GB DIMMs. (Refer to hood label for more information)

Network Controller One NC105i PCI-E Gigabit NIC (embedded) (Wake on LAN and PXE capable)

Expansion Slots
Slot Number
Bus Speed
Bus Number*
Device Number**
Hot Plug
(Y/N)
PCI Voltage
Notes
3
x8 PCI-Express
3
1
N
3.3 volts
Low Profile
1
x4 PCI-Express
5
0
N
3.3 volts
Full Length
Full Height
2
x4 PCI-Express
6
0
N
3.3 volts
Full length
Full Height
1 PCI-X*** Dynamic 1 N 3.3 volts Full Length
Full Height
2 PCI-X*** Dynamic 2 N 3.3 volts Full Length
Full Height
NOTE: All slots can accept universal keyed PCI cards
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus).
*** PCI-X bus speed will be 133MHz when only one PCI-X card is installed. It will be 100MHz when both slots have PCI-X cards installed.

Storage Controller 4HDD Models HP Embedded SATA RAID Controller (integrated into the south-bridge) supporting SW RAID 0,1
NOTE: A diskette drive is needed to install storage controller drivers during a Windows operating system installation from a CD.
NOTE: A diskette drive is needed to install storage controller drivers during a Windows operating system installation from a CD.

StorageOptical Drives:  
DVD-ROM 8x IDE (ATAPI) DVD-ROM drive, slim (optional)
DVD RW 8x IDE (ATAPI) DVD-RW drive, slim (optional)
Diskette Drives Via USB only
Drive Bays: 
Hot Plug SAS/SATA Up to 12 Hot Plug SAS/SATA 3.5" drives (4 drive bays standard)
NOTE: 4 Drive Models are Non-Hot Pluggable. Smart Array Controller must be added for Hot Plug drive capability. 4 Drive Models can be upgraded with the addition of a Smart Array Controller and a SAS/SATA Multi-lane cable (464830-B21). 12 Drive Model available via CTO factory integration ONLY.
NOTE: The addition of a Smart Array Controller requires the addition of a SAS/SATA Multi-lane cable (464830-B21)

Maximum Internal Storage SATA Maximum Internal 12.0TB 12 x 1TB
SAS Maximum Internal 12.0TB 12 x 1TB

Interfaces Parallel None
Network RJ-45 (Ethernet) 1 10/100/1000 NIC port (plus 1 optional for the HP ProLiant Lights Out 100c Remote Management Card)
Serial 1
Pointing Device (Mouse) 1
Graphics 1
Keyboard 1
USB 7 total ports: (2) front, (4) rear, (1) internal
NOTE: Please see the following URL for additional information regarding USB support:
http://h18004.www1.hp.com/products/servers/platforms/usb-
support.html
.

Graphics

32MB shared supporting 1600 x 1200 x 16M resolution.


Form Factor Rack (2U), (3.5 in/8.89 cm)

Remote Management Lights-Out 100c Lights Out LO100c is a family of Remote Management Card (RMC) for HP ProLiant 100 series servers that do not have embedded LO100i. The LO100c has all the features of the LO100i Advanced license and allows customers, or their service providers, to remotely manage ProLiant servers over a LAN or the Internet from anywhere, anytime regardless whether the server is located in the same building, across town, or around the globe.

With LO100c, users can acquire complete remote control with Virtual KVM (graphical hardware-based, remote console). Users can also access the server's serial console, control system power, update system firmware and software, as well as monitor system environmental conditions. The LO100c remote management card can be accessed from a web browser or command line interface. This virtual "at-the-server" functionality means administrators stay in control of remote HP ProLiant 100 series servers.

The HP Lights-Out100c consists of a management processor and firmware that provides cost-effective, entry-level lights-out functionality, basic system board management functions, and diagnostics.

NOTE: For more information, please refer to the QuickSpecs for the LO100c found at:: http://h18004.www1.hp.com/products/servers/management/
remotemgmt/lightsout100/index.html

Server Management Stand Alone Software Product and ProLiant Essentials ProLiant Essentials Rapid Deployment Pack Rapid Deployment Pack (RDP) extends HP Systems Insight Manager with a complete deployment solution for HP ProLiant servers RDP provides a central location to configure server hardware, deploy Windows, Linux and VMware ESX operating environments and install using images and scripted profiles. For more information, visit: http://www.hp.com/servers/rdp.
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to: http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials.

Core Infrastructure Management Subscriber's Choice
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based email subscription service that provides software and driver change notifications for ProLiant products. Sign up at: http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis.
ROMPaq, software and latest drivers The latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options, available through ProLiant Support Packs the ProLiant Essentials Rapid Deployment Pack, SmartStart or downloaded from Software and Drivers download pages website at: http://www.hp.com/go/support.

Industry Standard Compliance ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0 Compliant

Manageability

The optional HP PL100 G5 Lights-Out 100c Kit ALL provides the following OS-independent remote control capabilities with a riser card:

  • Virtual power
  • System event log access
  • System health
  • Remote Serial console (serial redirection)
  • Browser, Telnet access
  • SMASH-CLP compliant
  • IPMI 2.0 compliant
  • Virtual media (Floppy, CD, USB 2.0 (with release 3.0)
  • Secure Socket Layer Encryption
  • Secure Shell Encryption
  • Virtual KVM

Security Power-on password
Setup password

Server Power Cords

One Highline IEC Power cord ships standard (for connection to a Power Distribution Unit)

NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords that allow connection to 110V US wall outlets in a home or office. HP ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord If a user wishes to power a ProLiant DL server using a110V receptacle (NEMA-15), the NEMA power cord (AF556A) must be ordered separately.

If a local power cord is required, please reference the following power cord matrix: http://www.hp.com/go/powercordmatrix.

NOTE: Rack models ship standard with an IEC cable.
Localized cables included with geographic specific models in other world regions.

UPS and PDU Power
Cord Matrix
Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications for UPS and PDU units:
http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/index.html.

Power Supply 750Watts - (Hot Plug, Autoswitching) Ships Standard
1200Watts - High Efficiency 12V Hot Plug AC Power Supply (Autoswitching) (Optional)
750Watts - Power Supply (Redundant Hot Plug, Autoswitching) (Optional)
1200Watts - High Efficiency Power Supply (Redundant Hot Plug, Autoswitching), CSCI 2007/2008 (Optional)
NOTE: Climate Savers Computing Initiative, 2007-2008 Compliant
NOTE: For additional information please see the Options section of this QuickSpecs.

System Fans 4 system fans ship standard; Non-hot plug, Non-redundant

OS Support

Microsoft Windows 2003 and Microsoft Windows 2003/R2 Standard Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 Enterprise Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 Web Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 for Extended Systems Standard Edition (64-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 for Extended Systems Enterprise Edition (64-bit)
Microsoft Windows Server 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server

NOTE: For an up-to-date listing of the latest OS support matrix, please see:
http://www.hp.com/go/supportos
NOTE: For an up-to-date listing of the latest software and drivers available for your server, please select your server: http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?lang=en&cc=
us&taskId=135&prodTypeId=15351&prodCatId=241435
.

Rack Airflow Requirements Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm).

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.


Rack Kit HP ProLiant DL180 rack models have fixed rails which provide support for round or square mounting holes, including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 26" - 36".

Telco and Threaded Hole Rack Support Support for all 2-post Telco racks and threaded hole racks requires an additional option kit from Rack Solutions. The Rack Solutions brackets can be purchased at: http://www.racksolutions.com/hp.

Factory Express Portfolio for Servers and Storage

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.


HP Enterprise Configurator

The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.


Service and Support

HP services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server, purchased at the same time or afterward, internal to the enclosure, as well as 22" and smaller external monitors and tower UPS options up to 3kVA; these items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included, standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service – Simplify ProLiant solution implementation, maintenance and management.

  • Support Service – 3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
  • Deployment Service – Hardware Installation only

Enhanced Service – Optimize service level to increase IT performance and availability

  • Support Service – 3 Year 13x5 Same Business Day, 4-Hour response coverage
  • Deployment Service – Installation and Start-up only

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

For a complete listing of service offerings and information visit: http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack

contents
 Overview      Standard Features      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Models

Four Drive Serial ATA (SATA) Models
NOTE: To upgrade from 4 Non-Hot Plug SATA hard drives to 4 Hot Plug SATA/SAS hard drives the addition of a storage controller and one Internal SATA/SAS cable (464830-B21) are required. To upgrade to 8 Hot Plug SATA/SAS hard drives, the addition of a storage controller and two Internal SATA/SAS cables (464830-B21) are required.
NOTE: To upgrade to server models supporting 12 hard drives; you must start with HP ProLiant DL180 CTO Chassis (P/N 457649-B21). Please see the Configuration To Order section below.

HP DL180 G5, E5420 2.50GHz,(QC) 1GB (1P)
456830-xx1

HP DL180 G5, E5405 2.00 GHz,(QC) 1GB (1P)
456831-xx1

Processor
One of the following depending on model
Quad-Core Intel® Xeon® processor E5420 (2.50 GHz, 80W, 1333 MHz FSB)
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333 MHz FSB)
Cache Memory 12MB (2 x 6MB) Level 2 cache (5400 sequence)
Memory 1 GB (1 x 1 GB) PC2-5300 DIMMs (DDR2-667) with Advanced ECC capabilities
Network Controller One HP NC105i PCI-E (embedded)
Storage Controller Embedded SATA Raid Standard
Hard Drive None ship standard (up to 8 Hot Plug SATA or SAS drives supported standard with the addition of a controller and cable. 12 drive models supported via CTO only.)
Internal Storage

BTO internal storage capacity of up to:
8.0TB (8 x 1TB Hot Plug 3.5" SATA hard drives)
8.0TB (8 x 1TB Hot Plug 3.5" SAS hard drives)

Optical Drive DVD-ROM, DVD RW (Optional)
Form Factor Rack (2U)
  NOTE: Server models supporting 4 hard drives are Non-Hot Pluggable. Smart Array Controller must be added for Hot Plug drive capability.
NOTE: SAS (Serial Attach SCSI) capability requires the addition of a Smart Array or HBA Controller card.

Country Code Key

xx = 00 U.S.
xx = 20 Brazil
xx = 29 Japan
xx = 37 APD
xx = 42 Europe
xx = AA PRC
contents
 Overview      Standard Features      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Configuration (choose one of the following configurable models)
 Hot Plug Models 
HP ProLiant DL180 G5 Hot Plug SAS/SATA Rack CTO Chassis
457649-B21
Factory Integrated Model ships with: 
One embedded NC105i PCI-E Gigabit Server Adapters (WOL & PXE-capable) 
Three available PCI-Express slots: 
Slot 1: x8 low-profile/half-height slot 
Slot 2 & 3: x4 Full-Height/Full Length  
NOTE: Optional PCI-X option kit includes: Slot 1 and 2: full-length/full-height PCI-X 100. PCI-X slots are 64 bits; 133 MHz capable if only one PCI-X card is installed in the server. 
One HP SATA Embedded Cable Kit 
750 Watt Power Supply  
One Highline IEC Power Cord  
4 Non-Hot Plug Fans 
Rack (2U), (3.5 in/8.89 cm) 

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)
Processors Quad-Core Intel® Xeon® processor L5420 (2.50 GHz, 50W, 1333MHz FSB)
NOTE: If 2 processors are desired, select one 487901-L21 and one 487901-B21.
487901-L21
Quad-Core Intel® Xeon® processor L5410 (2.33 GHz, 50W, 1333MHz FSB)
NOTE: If 2 processors are desired, select one 491310-L21 and one 491310-B21.
491310-L21
Quad-Core Intel® Xeon® processor E5440 (2.83 GHz, 80W, 1333MHz FSB) Kit, FIO
NOTE: If 2 processors are desired, select one 466106-L21 and one 466106-B21.
466106-L21
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80W, 1333MHz FSB) Kit, FIO
NOTE: If 2 processors are desired, select one 458784-L21 and one 458784-B21.
458784-L21
Quad-Core Intel® Xeon® processor E5420 (2.50 GHz, 80W, 1333MHz FSB) Kit, FIO
NOTE: If 2 processors are desired, select one 458785-L21 and one 458785-B21.
458785-L21
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333MHz FSB) Kit, FIO
NOTE: If 2 processors are desired, select one 458786-L21 and one 458786-B21.
458786-L21
Dual-Core Intel® Xeon® processor E5205 (1.86 GHz, 65W, 1066MHz FSB) Kit, FIO
NOTE: If 2 processors are desired, select one 458787-L21 and one 458787-B21.
458787-L21

Memory 1 GB PC2-5300 2 x 512 MB Single Rank Kit
408850-B21
1 GB REG PC2-5300 1 x 1 GB Kit
462483-B21
2 GB REG PC2-5300 2 x 1 GB Low Power Single Rank Kit
483399-B21
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit
408851-B21
4 GB REG PC2-5300 2 x 2 GB Single Rank Kit 461840-B21
4 GB REG PC2-5300 2 x 2 GB Dual Rank Kit
408853-B21
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit 408854-B21
8 GB REG PC2-5300 2 x 4 GB Low Power Dual Rank Kit
NOTE: Dual Rank DIMMs are only supported in slots 1 and 2. See the memory population matrix in the Memory section of this QuickSpecs.
483403-B21

Hard Drive Cage HP DL180 8HDD Cage FIO Kit
451368-B21
HP DL180 12HDD Cage FIO Kit
451369-B21
NOTE: The installation of a 12HDD Cage requires the addition of a 4-port SAS controller that supports expanders. A Smart Array Controller, P400 or better, is recommended.
NOTE: The addition of a Smart Array Controller (or 4-port SAS controller that supports expanders) requires the addition a SAS/SATA Multi-lane cable (464830-B21).
 

Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Options" section below. Some options may not be available for factory integration. Please contact an HP sales representative for additional information.
contents
 Overview      Standard Features      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Options

Unique Options HP ProLiant DL180 PCI/X Riser Kit
NOTE: This option kit replaces the three internal expansion slots listed in step 1 base configuration.
451285-B21
NOTE: Optional PCI-X option kit includes: Slot 1: full-length/full-height PCI-X 100; Slot 2: Full length/Full-height PCI-X 100. PCI-X slots are 64 bits; 133 MHz capable if only one PCI-X card is installed in the server.  

Power Supplies 750W Redundant Power Supply Kit 451366-B21
High Efficiency HP 1200W 12V Hot Plug AC Power Supply
437572-B21
NOTE: Redundant Power Supply configuration for 1200W power supply requires both power supplies to be 1200W. The 1200W and 750W power supplies cannot be mixed.  

Remote Management Lights-Out 100c Remote Management Card  
HP Lights Out 100c Remote Management Card 100c Kit 445513-B21
NOTE: For more information regarding Lights Out 100c Remote Management Card, please see the following URL: http://www.hp.com/servers/proliantessentials.  

Server Management Stand Alone Software Products and ProLiant Essentials NOTE: Electronic licensing options are available for Insight Control suites and select ProLiant Essentials software products. Please see the appropriate Insight Control and ProLiant Essentials QuickSpecs for additional information.  
Deploy  
Rapid Deployment Pack  
ProLiant Essentials Rapid Deployment Pack No Media 1-Server License including 1 year of 24x7 Technical Support and Updates
NOTE: This license allows 1 server to be deployed and managed via RDP. Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.
452151-B21
NOTE: For additional ProLiant Essentials Rapid Deployment Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11053_div/11053_div.html  
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to: http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials.
 

Processor Quad-Core Intel® Xeon® processor L5420 (2.50 GHz, 50W, 1333MHz FSB) 487901-B21
Quad-Core Intel® Xeon® processor L5410 (2.33 GHz, 50W, 1333MHz FSB) 491310-B21
Quad-Core Intel® Xeon® processor E5440 (2.83 GHz, 80W, 1333MHz FSB) Option Kit
466106-B21
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80W, 1333MHz FSB) Option Kit
458784-B21
Quad-Core Intel® Xeon® processor E5420 (2.50 GHz, 80W, 1333MHz FSB) Option Kit
458785-B21
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333MHz FSB) Option Kit
458786-B21
Dual-Core Intel® Xeon® processor E5205 (1.86 GHz, 65W, 1066MHz FSB) Option Kit
458787-B21

Memory

1 GB REG PC2-5300 2 x 512 MB Single Rank Kit
408850-B21
1 GB REG PC2-5300 1 x 1 GB Kit
462483-B21
2 GB REG PC2-5300 2 x 1 GB Low Power Single Rank Kit
483399-B21
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit
408851-B21
4 GB REG PC2-5300 2 x 2 GB Dual Rank Kit
408853-B21
4 GB REG PC2-5300 2 x 2 GB LP Single Rank Kit
461840-B21
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit 408854-B21
8 GB REG PC2-5300 2 x 4 GB Low Power Dual Rank Kit
NOTE: Dual Rank DIMMs are only supported in slots 1 and 2. See the memory population matrix in the Memory section of this QuickSpecs.
483403-B21

Hard Drives SATA Hot Plug Midline (MDL) Drives
HP 1TB 3G SATA 7.2K 3.5" MDL HDD
454146-B21
HP 750GB 3G SATA 7.2K 3.5" MDL HDD 458930-B21
HP 500GB 3G SATA 7.2K 3.5" MDL HDD 458928-B21
HP 250GB 3G SATA 7.2K 3.5" MDL HDD 458926-B21
NOTE: Server BIOS update is required to support 3G SATA drives when configured with embedded SATA controller.  
SATA Entry (ETY) Drives 3.5", Hot Plug  
HP 160GB 3G SATA 7.2K 3.5" ETY HDD 458945-B21
NOTE: Server BIOS update is required to support 3G SATA drives when configured with embedded SATA controller.  
NOTE: SATA drives have a 1 year warranty. Please see the SATA Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html (Worldwide)
 
SAS Midline (MDL) Drives 3.5", Hot Plug  
HP 1TB 7.2K 3.5" DP SAS MDL HDD 461137-B21
HP 750GB 7.2K 3.5" DP SAS MDL HDD 461135-B21
SAS Enterprise (ENT) Drives 3.5", Hot Plug  
450GB 3G 15K 3.5" DP SAS ENT HDD 454232-B21
HP 300GB 3G SAS 15K 3.5" DP HDD 416127-B21
HP 300GB SAS 15K Hot Plug 3.5 SP HDD 431944-B21
HP 146GB 3G SAS 15K 3.5" DP HDD 384854-B21
HP 146GB SAS 15K Hot Plug 3.5" SP HDD 375872-B21
HP 72GB 3G SAS 15K 3.5" DP HDD 384852-B21
HP 72GB SAS 15K Hot Plug 3.5" SP HDD 375870-B21
NOTE: Please see the Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html (Worldwide)
 
NOTE: If selecting more than 4 hard drives or if using SAS hard drives a Smart Array controller and two SAS/SATA cables (P/N 464830-B21) are required.  

Optical Drives HP Slim SATA DVD-ROM
481041-B21
HP Slim SATA DVDRW 481043-B21
DVD-ROM Drive 449991-B21
DVD-RW Drive
449998-B21

Storage Controllers SAS Controllers  
HP SC44Ge Host Bus Adapter
416096-B21
NOTE: Please see the HBA QuickSpecs for additional information:
http://h18004.www1.hp.com/products/quickspecs/12617_div/12617_div.html (SC44Ge HBA)
SCSI HBA  
HP SC11Xe Host Bus Adapter
412911-B21
NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/12566_div/12566_div.html.
(SCSI HBA)
Internal SAS/SATA Cable
NOTE: If selecting more than 4 hard drives or if using SAS hard drives a Smart Array controller is required and two SAS/SATA cables.
NOTE: The addition of a Smart Array Controller requires the addition of a SAS/SATA Multi-lane cable.
464830-B21
HP Smart Array E200 Controller
HP Smart Array E200/128 BBWC Controller
411508-B21
HP Smart Array E500 Controller
HP Smart Array E500/256MB Controller
435129-B21
NOTE: When ordering a Smart Array E500 Controller with BBWC the addition of the HP SA-P400 and SA-E500 24" Battery Cable Kit (417836-B21) is required.  
HP Smart Array P400 Controller
HP Smart Array P400/256MB Controller
405132-B21
HP Smart Array P400/512MB Controller with BBWC 411064-B21
NOTE: When ordering a Smart Array P400 Controller with BBWC the addition of the HP SA-P400 and SA-E500 24" Battery (417836-B21) is required.  
HP SA-P400 and SA-E500 24 In Battery Cable Kit
NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the server if a Smart Array P400 or Smart Array E500 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for detailed installation instructions.
417836-B21
HP Smart Array P800 Controller  
HP Smart Array P800/512 BBWC Controller 381513-B21
512 MB Battery-backed write cache upgrade 405148-B21
Battery-backed write cache upgrade 383280-B21
NOTE: Please see the following Controller QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/12460_div/12460_div.html
(Smart Array E200 Controller)
http://h18000.www1.hp.com/products/quickspecs/12700_div/12700_div.html
(Smart Array E500 Controller)
http://h18000.www1.hp.com/products/quickspecs/12400_div/12400_div.html
(Smart Array P400 Controller)
http://h18000.www1.hp.com/products/quickspecs/12616_div/12616_div.html
(Smart Array P800 Controller)
 

Communications HP NC110T PCI Express Gigabit Server Adapter
NOTE: Does not support Windows 2000.
434905-B21
HP NC360T PCI Express Dual Port Gigabit Server Adapter
412648-B21
HP NC364T PCI Express Quad Port Gigabit Server Adapter
NOTE: Does not support Windows 2000.
435508-B21
HP NC373F PCI Express Multifunction Gigabit Server Adapter
394793-B21
HP NC373T PCI Express Multifunction Gigabit Server Adapter
394791-B21
HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter
NOTE: Supported on a Full Length-Full Height slot only.
394795-B21
HP NC510C PCIe 10 Gigabit Server Adapter
NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510C adapter.
414129-B21
HP NC510F PCIe 10 Gigabit Server Adapter
NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510F adapter.
414126-B21

HPC Specific Options HP IB 4X DDR PCI-e Dual-port 0 memory HCA

483513-B21


Rack Kits HP Rack Cable Management Velcro Clips

379820-B21


HP StorageWorks Modular Smart Array 20HP StorageWorks Modular Smart Array 20

335921-B21

NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant power supplies.
NOTE: Please see the Modular Smart Array 20 QuickSpecs for additional information including configuration steps and additional options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11942_div/11942_div.html (Worldwide)
 

HP StorageWorks Modular Smart Array 30HP StorageWorks Modular Smart Array 30 SB

302969-B21

NOTE: Rack-mountable 14 drive enclosure with single bus, redundant power supplies.
NOTE: Please see the Modular Smart Array 30 QuickSpecs for additional information including configuration steps and additional options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11738_div/11738_div.html (Worldwide)
 

HP StorageWorks Modular Smart Array 50HP StorageWorks Modular Smart Array 50 Enclosure

364430-B21

NOTE: Rack-mountable 10 SFF drive enclosure with single I/O module, redundant hot plug power supplies and hot plug fans.
NOTE: Please see the Modular Smart Array 50 QuickSpecs for additional information including configuration steps and additional options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/12245_div/12245_div.html (Worldwide)
 

HP StorageWorks Modular Smart Array 60HP StorageWorks 60 Modular Smart Array

418408-B21

NOTE: Rack-mountable 12-drive (3.5" 3G SAS/1.5G SATA) 2U enclosure with 3Gb/s SAS host connectivity and redundant power supplies.
NOTE: Please see the Modular Smart Array 60 QuickSpecs for additional information including configuration steps and additional options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/12627_div/12627_div.html (Worldwide)
 

HP StorageWorks Modular Smart Array 70HP StorageWorks 70 Modular Smart Array

418800-B21

NOTE: Rack-mountable 25-drive (2.5" 3G SAS/1.5G SATA) 2U enclosure with 3Gb/s SAS host connectivity and redundant power supplies.
NOTE: Please see the Modular Smart Array 70 QuickSpecs for additional information including configuration steps and additional options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/12652_div/12652_div.html (Worldwide)
 

HP StorageWorks Modular Smart Array 500HP StorageWorks 500 Modular Smart Array

335880-B21

NOTE: Please see the Modular Smart Array 500 QuickSpecs for additional information including configuration steps and additional options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11956_div/11956_div.html (Worldwide) 

Tape Drives

NOTE: For the complete listing of Tape Drive offerings, please see:
http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html

 
USB Tape Drives  
HP StorageWorks 1U USB Rack-Mount Kit with one DAT 160 USB Tape Drive
AG703A
SAS Tape Drives
NOTE: For the DL180 G5, HP recommends purchasing the HP SC44Ge HBA (416096-B21) for a dedicated SAS HBA for tape.
HP StorageWorks DAT 160 SAS Internal Tape Drive
NOTE: HP recommends combining this tape drive with the 1U SAS Rack-Mount kit (AE459A) for a complete rack-mount solution.
Q1587A
HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive
NOTE: HP recommends combining this tape drive with the 1U SAS Rack-Mount kit (AE459A) for a complete rack-mount solution.
DW085A
HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive
NOTE: HP recommends combining this tape drive with the 1U SAS Rack-Mount kit (AE459A) for a complete rack-mount solution.
EH847A
HP StorageWorks 1U SAS Rack-mount kit with one LTO-4 Ultrium 1760 EH946A
NOTE: Please refer to the "Tape Drives, Tape Autoloaders & Tape Libraries" table in the Storage section of this document for a list of SAS controllers with tape support.  
Ultrium Tape Drives
SCSI Tape Drives  
HP StorageWorks LTO-1 Ultrium 232 Internal Tape Drive (Carbonite)
NOTE: HP recommends combining this tape drive with the 1U SCSI Rack-Mount kit (A7445B) for a complete rack-mount solution.
DW064A
HP StorageWorks 1U SCSI Rack-mount kit with one LTO-2 Ultrium 448 SCSI Tape Drive (Carbonite)
DW028B
HP StorageWorks 1U SCSI Rack-mount kit with one LTO-3 Ultrium 920
EH903A
HP StorageWorks 3U SCSI Rack-mount kit with one LTO-3 Ultrium 960 (Carbonite) Q1595B
HP StorageWorks 3U SCSI Rack-Mount with 1 LTO-4 Ultrium 1840 Tape Drive EH926A
NOTE: Please see the HP StorageWorks LTO Ultrium Tape Drive QuickSpecs for additional options such as controllers, media, and other related items:
http://h18006.www1.hp.com/products/quickspecs/11739_div/11739_div.html (Worldwide)
http://h18006.www1.hp.com/products/quickspecs/12128_div/12128_div.html (Worldwide)
 
For an up-to-date listing of the latest O/S and software support details for HP Ultrium tape drives, please visit: http://www.hp.com/go/connect.  
Rack-Mount Tape Drive Enclosures  
HP StorageWorks 1U SCSI Rack-Mount kit
NOTE: The 1U Rack-Mount Kit can support up to (2) half-height tape drives and is compatible with multiple Single-Ended and LVD SCSI tape drives including the DAT 40, DAT 72, DAT 160, DLT VS160, LTO-1 Ultrium 232, LTO-2 Ultrium 448, LTO-3 Ultrium 920 and LTO-4 Ultrium 1760 tape drives.
A7445B
HP StorageWorks 1U USB Rack-Mount Kit
NOTE: The 1U USB Rack-Mount Kit can support up to (2) half-height tape drives and is compatible with the DAT 40 USB, DAT 72 USB and DAT 160 tape drives.
A8007A
HP StorageWorks 1U SAS Rack-Mount Kit
NOTE: The 1U SAS Rack-Mount Kit can support up to (2) half-height tape drives and is compatible with the LTO-2 Ultrium 448 SAS and LTO-3 Ultrium 920 SAS and LTO-4 Ultrium 1760 SAS tape drives.
AE459A
HP StorageWorks 3U SCSI Rack-mount kit
NOTE: The 3U SCSI Rack-mount Kit can support up to (2) full-height or (4) half-height tape drives and is compatible with multiple LVD SCSI tape drives including DAT 40, DAT 72, DLT VS160, SDLT 600, LTO-1 Ultrium 232, LTO-2 Ultrium 460, LTO-2 Ultrium 448, LTO-3 Ultrium 920, LTO-3 Ultrium 960, LTO-4 Ultrium 1760 and LTO-4 Ultrium 1840 tape drives.
274338-B22
HP StorageWorks 3U SAS Rack-mount Kit
NOTE: The 3U Rack-mount Kit can support up to (2) full-height or (4) half-height tape drives and compatible with multiple SAS tape drives including DAT 160 SAS, LTO-2 Ultrium 448 SAS, LTO-3 Ultrium 920 SAS, LTO-4 Ultrium 1760 SAS and LTO-4 Ultrium 1840 SAS tape drives.
AG576A
NOTE: Please see the Rack-Mount Tape Drive Kits QuickSpecs for additional information regarding these kits:
http://h18000.www1.hp.com/products/quickspecs/10854_div/10854_div.html (Worldwide)
 

Disk-Based Backup RDX Removable Disk Backup  
HP StorageWorks RDX160 External Removable Disk Backup System
NOTE: 160GB of Disk Storage.
AJ766A
HP StorageWorks RDX320 External Removable Disk Backup System
NOTE: 320GB of Disk Storage.
AJ768A
NOTE: Please see the HP RDX Removable Disk Backup System QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13036_div/13036_div.html
 
HP D2D Backup System  
HP StorageWorks D2D120 Backup System
NOTE: 2TB of Disk Storage.
EH884A
HP StorageWorks D2D120 Backup System with Data Protector Express Software Kit
NOTE: 2TB of Disk Storage.
EH924A
HP StorageWorks D2D130 Backup System
NOTE: 3TB of Disk Storage.
EH950A
HP StorageWorks D2D130 Backup System with Data Protector Express Software Kit
NOTE: 3TB of Disk Storage.
EH951A
HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive
NOTE: 3TB of Disk Storage.
EH952A
HP StorageWorks D2D2503i Backup System
NOTE: 3TB of Disk Storage.
EH945A
HP StorageWorks D2D4004i Backup System
NOTE: 4.5TB of Disk Storage.
EH938A
NOTE: Please see the HP D2D Backup Systems QuickSpecs for additional information: http://www.hp.com/go/d2d  

Tape Autoloaders HP StorageWorks DAT Autoloader  
HP StorageWorks DAT 72x10 tape autoloader AE313B
HP StorageWorks 1/8 Tape Autoloader  
HP StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader AK377A
HP StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SCSI Tape Autoloader AJ816A
HP StorageWorks 1/8 LTO-3 Ultrium 920 G2 Tape Autoloader AH165A
HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Autoloader AH558A
HP StorageWorks 1/8 LTO-2 Ultrium 448 G2 Tape Autoloader AH164A
HP StorageWorks 1/8 LTO-1 Ultrium 232 G2 Tape Autoloader AH163A
HP StorageWorks 1/8 G2 Tape Autoloader Rack Kit
NOTE: Required to install the 1/8 G2 Autoloaders in a standard 19-inch rack; includes rails and rackmount instructions
AH166A
NOTE: Please reference the Tape Autoloader QuickSpecs at: http://www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at: http://www.hp.com/go/ebs.  

Tape Libraries HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 SCSI Drive Library
AJ033A
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 4GB FC Library
AJ034A
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1760 SAS Drive Library
AK378A
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1760 SCSI Drive Library AJ817A
HP StorageWorks MSL2024 1 LTO-3 Ultrium 960 SCSI Drive Library
AG115A
HP StorageWorks MSL2024 1 LTO-3 Ultrium 960 4GB FC Library
AG326B
HP StorageWorks MSL2024 1 LTO-3 Ultrium 920 SAS Drive Library
AH559A
HP StorageWorks MSL2024 1 LTO-3 Ultrium 920 SCSI Drive Library
AH169A
HP StorageWorks MSL2024 1 LTO-2 Ultrium 448 SCSI Drive Library
AG116A
HP StorageWorks MSL4048 Tape Library  
HP StorageWorks MSL4048 1 LTO-4 Ultrium 1840 SCSI Drive Library
AJ035A
HP StorageWorks MSL4048 1 LTO-4 Ultrium 1840 4GB FC Library
AJ036A
HP StorageWorks MSL4048 2 LTO-4 Ultrium 1760 SAS Drive Library
AK380A
HP StorageWorks MSL4048 2 LTO-4 Ultrium 1760 SCSI Drive Library AJ818A
HP StorageWorks MSL4048 1 LTO-3 Ultrium 960 SCSI Drive Library
AG322A
HP StorageWorks MSL4048 1 LTO-3 Ultrium 960 4GB FC Library
AG324B
HP StorageWorks MSL4048 1 LTO-3 Ultrium 920 SAS Drive Library
AH560A
HP StorageWorks MSL4048 1 LTO-3 Ultrium 920 SCSI Drive Library
AH171A
HP StorageWorks MSL4048 1 LTO-2 Ultrium 448 SCSI Drive Library