Overview

HP ProLiant DL120 Generation 5 (G5)

Front View:		Rear View:
1.	Cover	1.	Power supply cable socket
2.	Four PC2-6400 UB ECC DDR2 Memory Slots	2.	Mouse connector
3.	Processor Socket (Intel® Xeon®, Core™2, Pentium® or Celeron®)	3.	USB connectors (2)
		4.	Serial connector
4.	Power Supply (350 Watt)	5.	Expansion slot 2, PCI-e x4, low-profile, half-length
5.	3 Non Hot Plug Dual Rotor Fans	6.	Expansion slot 1, PCI-e x8, Full high, Full-length (PCI-X optional)
6.	Optional 12.7mm DVD-ROM, or DVD-RW Drive
7.	Two upfront USB connectors	7.	UID button/LED
8.	Power Button, UID Button, and Front LED Indicators	8.	Video connector
9.	Support for up to two Non-Hot Plug SATA or SAS Hard Drives	9.	DL120 G5 HP Lights Out 100c management NIC port (optional)

10.	Two PCI express Slots (2 PCI-Express x8 connectors standard, one x8, one x4 Lanes)	10.	NIC Port
		11.	Keyboard connector

What's New

Adding Quad-Core Intel® Xeon® 3100 and 3300 processor for more performance, flexibility and choice
Support for SAS Hot Plug Enterprise (ENT) Hard Drives

At a Glance

The HP ProLiant DL120 G5 Server is an entry-level rack-optimized server providing you with all confidence of a HP ProLiant server. The single processor, 1U server is ideal for single-application IT infrastructure, web and edge-of-network applications. The HP ProLiant DL120 provides two PCI-Express slots with an option to replace one PCI-Express slot with a PCI-X slot. Optional upgrades, including HP HBAs and Smart Array Controllers, provide support for SAS hard disk drives. An optional DL120G5 HP Lights Out 100c (LO100c) Remote Management Card provides cost-effective remote management from anywhere, anytime. Plus, you get the cost-effective solution of a single-processor platform with the performance advantages of dual-core or quad-core.

Processor:
- Quad-Core Intel® Xeon® 3300 processor sequence
- Quad-Core Intel® Xeon® 3200 processor sequence
- Dual-Core Intel® Xeon® 3100 processor sequence
- Dual-Core Intel® Xeon® 3000 processor sequence
- Dual-Core Intel® Core™2 E4600 processor
- Dual-Core Intel® Pentium® E2160 processor
- Single-Core Intel® Celeron® 440 processor
- Single-Core Intel® Celeron® 420 processor
- Intel® 3200 Chipset with up to 1333MHz Front Side Bus (FSB)
Memory:

Supports up to 8 GB of PC2-6400 (800 MHz) Unbuffered DDR2 ECC SDRAM Memory
4 DIMM sockets

Storage Controller:

Embedded SATA Controller with RAID 0/1 support

Internal Drive Support:

Two 3.5" (Large Form Factor) SATA or SAS hard drives
- SAS drives require optional SAS Host Bus Adapter (HBA) or Smart Array Controller
Internal storage capacity of up to 1.5TB (2 x 750GB SATA hard drives)
Optional DVD-ROM or DVD-RW optical drive

Network Controller:

Embedded NC105i Gigabit Server Adapter

Expansion Slots:

Two total slots:
- (1) Full length PCI Express x8 slot (x8 connector)
- Can be replaced with a full-length 64-bit /133MHz PCI-X slot
- (1) Half-length, low-profile PCI Express x4 slot (x8 connector)

USB 2.0 Ports:
- Up to 5 Total: (2) front; (1) internal; (2) rear accessible ports
- Internal USB port (optional) for flexible storage, security, or USB drive key deployment
Management:

Standard Lights Out 100 IPMI 2.0 reporting
DL120G5 HP Lights Out 100c Remote Management Card (Optional)
Front Panel status LEDs including system health and UID

Form Factor:

1U (1.69" / 4.30 cm) Rack Mount Chassis
27.5" (69.85 cm) Deep
New fixed mounting rails included with all models

Warranty:
- This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives have a one-year warranty. SAS Enterprise drives have a three-year warranty.
- NOTE: Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day response. (3-1-1 warranty in AP and Brazil, excluding Japan). Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.htm
- Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

Standard Features

NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA1-8000ENW/EEW NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section.
Processor One of the following depending on Model	Quad-Core Intel® Xeon® processor X3360 (2.83GHz, 12MB L2 cache, 95 Watts, 1333MHz Front Side Bus FSB) NOTE: Available via CTO only.
	Quad-Core Intel® Xeon® processor X3350 (2.66GHz, 12MB L2 cache, 95 Watts, 1333MHz FSB) NOTE: Available via CTO only.
	Quad-Core Intel® Xeon® processor X3330 (2.66 GHz, 6MB L2 cache, 95 Watts, 1333MHz FSB) NOTE: Available via CTO only.
	Quad-Core Intel® Xeon® processor X3320 (2.5GHz, 6MB L2 cache, 95 Watts, 1333MHz FSB) NOTE: Available via CTO only.
	Quad-Core Intel® Xeon® processor X3210 (2.13GHz, 8MB L2 Cache, 95 Watts, 1066MHz FSB) NOTE: Available via CTO only.
	Dual-Core Intel® Xeon® processor E3120 (3.16 GHz, 6MB L2 cache, 65 Watts, 1333MHz FSB) NOTE: Available via CTO only.
	Dual-Core Intel® Xeon® processor E3110 (3.0GHz, 6MB L2 cache, 65 Watts, 1333MHz FSB) NOTE: Available via CTO only.
	Dual-Core Intel® Xeon® processor 3065 (2.33GHz, 4MB L2 Cache, 65 Watts, 1333MHz FSB)
	Dual-Core Intel® Core™2 processor E4600 (2.4GHz, 2MB L2 cache, 800MHz FSB) NOTE: Available via CTO only.
	Dual-Core Intel® Pentium® processor E2160 (1.80GHz, 1MB L2 cache, 800MHz FSB)
	Single-Core Intel® Celeron® processor 440 (2.00GHz, 512KB L2 cache, 800MHz FSB) NOTE: Available via CTO only.
	Single-Core Intel® Celeron® processor 420 (1.60GHz, 512KB L2 cache, 800MHz FSB) NOTE: Available via CTO only.

Cache Memory One of the following depending on Model	12 MB L2 Cache NOTE: For Models with Intel® Xeon® processor X3360, and X3350.
	8 MB L2 Cache NOTE: For Models with Intel® Xeon® processor X3330, X3320, E3120, and E3110.
	6 MB L2 Cache NOTE: For Models with Intel® Xeon® processor X3320 and E3110.
	4 MB L2 Cache NOTE: For Models with the Intel® Xeon® processor 3065.
	2 MB L2 Cache NOTE: For Models with the Intel® Core2 processor E4600.
	1 MB L2 Cache NOTE: For Models with the Intel® Pentium processor E2160.
	512 KB L2 Cache NOTE: For Models with the Intel® Celeron processor 440 and 420.

Chipset	Intel® 3200 Chipset

Memory Protection	ECC

Memory One of the following depending on Model	Type	PC2-6400 (800MHz) Unbuffered ECC DDR2 SDRAM Interleaving optional (Enabled when DIMMs populated in pairs)
	DIMM Sockets	4
	Standard - Xeon 3065 and Pentium E2160 Models	1 GB (1 x 1 GB)
	Standard - Xeon 3320 Model	2 GB (2 x 1 GB)
	Maximum Memory	8 GB

Network Controller	Embedded NC105i Gigabit Server Adapter

Expansion Slots	Technology	Bus Width***	Connector Width	Bus Number*	Device No.**	Form Factor	Notes
1 (Standard)	PCIe	X8	x8	0	1	Full length, full height slot	This PCIe slot can be replaced with optional PCI-X slot below
2 (Standard)	PCIe	X4	x8	0	28	Low profile slot
1 (Optional)	PCI-X (133MHz, 3.3Volt)	64-bit	N/A	0	1	Full length, full height slot
	* Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number.
	** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus)
	*** Indicates the number of physical electrical lanes running to a PCI-e connector.

Storage Controllers	Integrated Intel® 82801IR Serial ATA Host Controller with RAID 0/1 support. NOTE: The non-hot-plug drive option kits include a SATA cable along with the drive itself. This cable allows the drives to be connected to the embedded SATA controller. The cables are point to point.
	SAS and SATA controllers available via PCI card option NOTE: If a HBA or SAS controller is ordered for SATA RAID or SAS support, the 4 Lane SAS/SATA Host Fan Out Cable Kit (P/N 457692-B21) must also be ordered to connect the drives.

Storage	Optical Drive	Optional 12.7mm DVD-ROM, or DVD-RW Drive
	Hard Drives	Non-Hot Plug SATA /SAS	Up to 2 non-hot plug SATA/SAS 3.5" drives NOTE: SAS requires optional HBA or SA card.

Maximum Internal Storage Type	Non-Hot Plug SATA	1.5TB	2 x 750GB SATA
Maximum Internal Storage Type	Non-Hot Plug SAS	900GB	2 x 450GB SAS

Interfaces	Serial	1
	USB 2.0	5 (2 front, 1 internal, 2 rear) NOTE: Please see the following URL for additional information regarding USB support: http://h18004.www1.hp.com/products/servers/platforms/usb-support.html
	Graphics	1 (rear)
	Keyboard	1
	Mouse	1
	Management	1 for optional LO100c
	Network RJ-45	1

Graphics	32MB shared supporting 1600x1200x16M resolution

Form Factor	Rack (1U), (1.69 in/4.30 cm), 27.5" deep

Remote Management

Lights-Out 100c

Lights Out LO100c is a Remote Management Card (RMC) for ProLiant 100 series servers that do not have embedded LO100i. The LO100c has all the features of the LO100i Advanced license and allows customers, or their service providers, to remotely manage ProLiant servers over a LAN or the Internet from anywhere, anytime regardless whether the server is located in the same building, across town, or around the globe.

With LO100c, users can acquire complete remote control with Virtual KVM (graphical hardware-based, remote console). Users can also access the server's serial console, control system power, update system firmware and software, as well as monitor system environmental conditions. The LO100c remote management card can be accessed from a web browser or command line interface. This virtual "at-the-server" functionality means administrators stay in control of remote HP ProLiant 100 series servers.

The HP Lights-Out100c consists of a management processor and firmware that provides cost-effective, entry-level lights-out functionality, basic system board management functions, and diagnostics.

NOTE: For more information, please refer to the QuickSpecs for the LO100c found at: http://h18004.www1.hp.com/products/servers/management/
remotemgmt.html

Core Infrastructure Management	Subscriber's Choice	Subscriber's Choice Driver and Support Alerts/Notifications is a web-based email subscription service that provides software and driver change notifications for ProLiant products. Sign up at: http://www.hp.com/go/subscriberschoice and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis.
	ROMPaq software and drivers	The latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options, available through software and drivers download pages website at: http://www.hp.com/go/support.

Industry Standard Compliance	ACPI 3.0
	PCI 2.3 Compliant
	PXE Support
	WOL Support
	Microsoft® Logo certifications
	USB 2.0
	IPMI 2.0

Intelligent Manageability	Automatic Server Recovery (ASR) Integrated Management Log Drive Parameter Tracking (with Smart Array Controllers) Dynamic Sector Repairing (with Smart Array Controllers) Pre-Failure Warranty (covers processors, SAS hard drives, and memory) BIOS Serial Console Front and Rear Unit ID (UID) button/LED

Security	Power-on password Keyboard password USB Port control Removable DVD-ROM Drive Assembly (optional) Dedicated LO100c management NIC port (optional) Administrator's password

Server Power Cords	North America	One 6' Highline (IEC-IEC) power cord ships standard
	Japan	One 6' Highline (IEC) power cord and one 6' Lowline power cord ship standard
	ROW	One 6' Highline (IEC) power cord ships standard
	NOTE: HP ProLiant DL120 G5p server ship standard worldwide with a C13 to C14 2M Highline jumper cord. Japanese models also include a 2M Lowline power cord. If customers require a local power cord, they can check the power cord matrix for the appropriate country specific cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.

Power Supply	Auto-sensing 350-Watt PFC Power Supply, CE Mark Compliant

UPS and PDU Power Cord Matrix	Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications for UPS and PDU units: http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/index.html

System Fans	3 dual rotor fans ship standard. 3 dual rotor fans total supported internally.

Required Cabling	For required cabling information, refer to the Web site at: http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-241475-3579703.html.

OS Support	Windows Server 2003 Microsoft Small Business Server 2003 R2 Microsoft Windows 2008 Red Hat Enterprise Linux SUSE Linux Enterprise Server
	NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/supportos.

Rack Airflow Requirements

Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm).

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server, or to the server documentation located in the Support section at the following URL: http://h18004.www1.hp.com/products/servers/proliantdl120/index.html.

Rack Kit	The DL120 G5 Fixed Rail System supports installation in racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24" - 36". Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit. Go to: www.racksolutions.com for more information.

HP Factory Express Capabilities

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.

Service and Support

HP Care Pack Services provide total care and support expertise with committed response times designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22-inch and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of support solutions provides a range of support services designed to meet the varying needs of your business. Whether an SMB, or large global corporation, HP has ProLiant server support offers to help you speedily deploy and maximize system uptime.

Recommended Service - simplify ProLiant solution implementation, maintenance, and management.

Support - 3 Year 9x5 Next Business Day coverage, excluding HP holidays only
Deployment Service - HW Installation only

Enhanced Service - optimize service level to increase IT performance and availability.

Support - 3 Year 13x5 Same Business Day, 4-Hour response coverage only

Refer to the information on the Installation of a ProLiant on the ProLiant Data Sheet; to be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays.

NOTE: For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack

Models

NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section.
DL120 E2160 1GB A160 SATA 465475 -xx1	Processor	Dual-Core Intel® Pentium® processor E2160 (1.80GHz, 1MB L2 cache, 800MHz FSB)
	Cache Memory	1MB L2 Cache
	Memory	1 GB (Standard) to 8 GB (Maximum) of ECC PC2-6400 Unbuffered DDR2 SDRAM Memory
	Network Controller	Embedded NC105i Gigabit Server Adapter
	Storage Controller	Intel® 82801IR Integrated Serial ATA Host Controller
	Hard Drives	1 x 160GB 3.5" Non-hot-plug SATA
	Internal Storage	Non-Hot Plug SAS: 600GB maximum Non-Hot Plug SATA: 1.5TB maximum NOTE: SAS requires optional PCI Controller.
	Optical Drive	Optional
	Power Supply	Auto-sensing 350-Watt PFC Power Supply, CE Mark Compliant
	Form Factor	Rack (1U), (1.69 in/4.30 cm)

DL120 3065 1GB A160 SATA 465476-xx1	Processor(s)	Dual-Core Intel® Xeon® processor 3065 (2.33GHz, 4MB L2 cache, 1333MHz FSB)
	Cache Memory	4MB L2 Cache
	Memory	1 GB (Standard) to 8 GB (Maximum) of ECC PC2-6400 Unbuffered DDR2 SDRAM Memory
	Network Controller	Embedded NC105i Gigabit Server Adapter
	Storage Controller	Intel® 82801IR Integrated Serial ATA Host Controller
	Hard Drives	1 x 160GB 3.5" Non-hot-plug SATA
	Internal Storage	Non-Hot Plug SAS: 600GB maximum Non-Hot Plug SATA: 1.0TB maximum NOTE: SAS requires optional PCI Controller.
	Optical Drive	Optional
	Power Supply	Auto-sensing 350-Watt PFC Power Supply, CE Mark Compliant
	Form Factor	Rack (1U), (1.69 in/4.30 cm)

DL120 X3320 2GB A160 SATA 469378-xx1	Processor(s)	Quad-Core Intel® Xeon® processor X3320 (2.50GHz, 6MB L2 cache, 1333MHz FSB)
	Cache Memory	6MB L2 Cache
	Memory	2 GB (2x1 GB) (Standard) to 8 GB (Maximum) of ECC PC2-6400 Unbuffered DDR2 SDRAM Memory
	Network Controller	Embedded NC105i Gigabit Server Adapter
	Storage Controller	Intel® 82801IR Integrated Serial ATA Host Controller
	Hard Drives	1 x 160GB 3.5" Non-hot-plug SATA
	Internal Storage	Non-Hot Plug SAS: 600GB maximum Non-Hot Plug SATA: 1.0TB maximum NOTE: SAS requires optional PCI Controller.
	Optical Drive	Optional
	Power Supply	Auto-sensing 350-Watt PFC Power Supply, CE Mark Compliant
	Form Factor	Rack (1U), (1.69 in/4.30 cm)

Country Code Key	xx=00	North America
	xx=20	Brazil
	xx=29	Japan
	xx=37	APD (Asia excluding Japan)
	xx=42	EURO (Europe / Middle East / Africa)
	xx=AA	PRC

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis. NOTE: This product offering does not support HP Factory Express Server Configuration Level 1. NOTE: FIO indicates that this option only available as a Factory Installable Option.
Step 1: Base Configuration (choose one of the following configurable models)
Models	DL120 CTO (Configure-To-Order) Non-Hot Plug Chassis	468653-B21
	Includes:
	Embedded NC105i Gigabit Server Adapter
	1 full length PCI Express x8 slot (x8 lane) and 1 half length low profile PCI Express x8 slot (x4 lane)
	Intel® 82801IR Integrated Serial ATA Host Controller
	Rack (1U) form factor, (1.69 in/4.30 cm)
	Fixed, mounting rails

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)
Processors	Intel® Celeron 420 processor, FIO Kit	450125-L22
	Intel® Celeron 440 processor, FIO Kit	468963-L22
	Dual-Core Intel® Pentium E2160 processor, FIO Kit	455035-L22
	Dual-Core Intel® Core2 E4600 processor, FIO Kit	482110-L22
	Dual-Core Intel® Xeon® 3065 processor, FIO Kit	450143-L22
	Dual-Core Intel® Xeon® E3110 processor, FIO Kit	463436-L22
	Dual-Core Intel® Xeon® processor E3120 processor, FIO Kit	493241-L22
	Quad-Core Intel® Xeon® X3360 processor, FIO Kit	493245-L22
	Quad-Core Intel® Xeon® X3330 processor, FIO Kit	493243-L22
	Quad-Core Intel® Xeon® X3210 processor, FIO Kit	455031-L22
	Quad-Core Intel® Xeon® X3320 processor, FIO Kit	463434-L22
	Quad-Core Intel® Xeon® X3350 processor, FIO Kit	463432-L22
Memory	2 GB Unbuffered PC2-6400 ECC DIMM (1 x 2 GB)	450260-B21
	1 GB Unbuffered PC2-6400 ECC DIMM (1 x 1 GB)	450259-B21
	512 MB Unbuffered PC2-6400 ECC DIMM (1 x 512 MB)	450258-B21
Hard Drives	SATA Non-Hot Plug Midline (MDL) Drives
	HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD	462595-B21
	HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD	458941-B21
	HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD	458939-B21
	SATA Non-Hot Plug Entry (ETY) Drives
	HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD	458947-B21
	SAS Enterprise (ENT) Drives 3.5" Drives, Non-Hot Plug
	HP 450GB 3G NHP 15K 3.5" DP SAS ENT HDD	454234-B21
	HP 300GB 3G NHP 15K 3.5" DP SAS ENT HDD	417950-B21
	HP 146GB 3G NHP 15K 3.5" DP SAS ENT HDD	417855-B21
	HP 300GB SAS 3.5" 15K NHP	431950-B21
	HP 146GB SAS 3.5" 15K NHP	432093-B21
	HP 72GB SAS 3.5" 15K NHP	432095-B21

Step 3: Choose Additional Options for Factory Integration (only one of the following from each list unless otherwise noted)
Storage Controllers	SAS Controllers (Required if NHP SAS Hard Drive selected in Step 2)
	HP Internal SAS/SATA 4-Port Cable NOTE: This cable option kit is automatically included in any CTO configuration when a HBA or SAS controller is selected.	457692-B21
	HP Smart Array E200/128 BBWC Controller	411508-B21
	HP Smart Array P800/512 MB BBWC Controller	381513-B21
	SAS HBA
	HP SC44Ge Host Bus Adapter	416096-B21
	HP SC40Ge Host Bus Adapter	449363-B21

Options

NOTE: Some options may not be factory integratable. Contact your local sales representative for additional information.
HP ProLiant DL120 G5 Unique Options	DL120 G5 HP Lights Out 100c Kit	469085-B21
	NOTE: This remote management card supports the DL120 G5 server only.

Memory (DIMMs)	2 GB Unbuffered PC2-6400 ECC DIMM (1 x 2 GB)	450260-B21
	1 GB Unbuffered PC2-6400 ECC DIMM (1 x 1 GB)	450259-B21
	512 MB Unbuffered PC2-6400 ECC DIMM (1 x 512 MB)	450258-B21

Optical Drives	HP Slim 12.7mm SATA DVD-ROM Optical Kit	481041-B21
	HP Slim 12.7mm SATA DVD-RW Optical Kit	481043-B21
	DVD-ROM Drive 12.7mm	449991-B21
	DVD-RW Drive 12.7mm	449998-B21

Hard Drives	SATA Non-Hot Plug Midline (MDL) Drives
	HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD	462595-B21
	HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD	458941-B21
	HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD	458939-B21
	SATA Non-Hot Plug Entry (ETY) Drives
	HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD	458947-B21
	NOTE: SATA hard drives have a 1-year warranty. Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11940_div/11940_div.html (Worldwide)
	SAS Enterprise (ENT) Drives 3.5" Drives, Non-Hot Plug
	HP 450GB 3G NHP 15K 3.5" DP SAS ENT HDD	454234-B21
	HP 300GB 3G NHP 15K 3.5" DP SAS ENT HDD	417950-B21
	HP 146GB 3G NHP 15K 3.5" DP SAS ENT HDD	417855-B21
	HP 300GB SAS 3.5" 15K NHP	431950-B21
	HP 146GB SAS 3.5" 15K NHP	432093-B21
	HP 72GB SAS 3.5" 15K NHP	432095-B21
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html (Worldwide)
	3.5" SATA Non-Hot Plug Drives
	HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD	411276-B21
	HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD	411275-B21
	NOTE: The previous generation of 1.5G SATA drives are still supported. These drives can be purchased as an option; however they are no longer configurable. NOTE: SATA hard drives have a 1-year warranty. Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11940_div/11940_div.html (Worldwide)

Storage Controllers	NOTE: The purchase of any HBA or HP Smart Array Controller requires the purchase of the 4 Lane SAS/SATA host fan out Cable Kit.
	SAS Controllers
	HP Internal SAS/SATA 4-Port Cable NOTE: The purchase of any HBA or HP Smart Array Controller requires the purchase of the 4 Lane SAS/SATA host fan out Cable Kit.	457692-B21
	Smart Array E200 Controller
	HP Smart Array E200/128 BBWC Controller	411508-B21
	128-MB BBWC (Battery-Backed Write Cache) Enabler NOTE: Supports the Smart Array E200 Controller, Smart Array 641 Controller, and Smart Array 642 Controller.	351580-B21
	Smart Array E500 Controller
	HP Smart Array E500/256MB Controller	435129-B21
	Battery-backed write cache upgrade NOTE: Battery only.	383280-B21
	512MB Battery-backed cache upgrade	405148-B21
	NOTE: Please see the following QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12460_div/12460_div.html (Smart Array E200 Controller) http://h18000.www1.hp.com/products/quickspecs/12700_div/12700_div.html (Smart Array E500 Controller)
	HP Smart Array P800/512MB BBWC Controller	381513-B21
	HP SA-P400 and SA-E500 24 In Battery Cable Kit	417836-B21
	NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the server if a Smart Array E500 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for detailed installation instructions.
	SAS HBA
	NOTE: The purchase of any HBA or HP Smart Array Controller requires the purchase of the 4 Lane SAS/SATA host fan out Cable Kit. (P/N 457692-B21)
	HP SC44Ge Host Bus Adapter	416096-B21
	NOTE: Please see the following QuickSpecs for Technical Specifications and additional information: http://h18004.www1.hp.com/products/quickspecs/12617_div/12617_div.html (SC44Ge HBA)
	SCSI Controllers NOTE: The HP ProLiant DL320 G5p PCI-X Riser Board Option Kit (P/N 450341-B21) is required for all PCI -X Controllers. This option is compatible with the DL120 G5.
	PCI-X Riser Board	450341-B21
	SCSI HBA
	HP SC11Xe Host Bus Adapter	412911-B21
	HP Internal SAS/SATA 4-Port Cable	457692-B21
	NOTE: Please see the following QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12566_div/12566_div.html (SC11Xe HBA)

Communications	HP NC110T PCI Express Gigabit Server Adapter NOTE: Does not support Windows 2000.	434905-B21
	HP NC360T PCI Express Dual Port Gigabit Server Adapter	412648-B21
	HP NC364T PCI Express Quad Port Gigabit Server Adapter NOTE: Does not support Windows 2000.	435508-B21
	HP NC373F PCI Express Multifunction Gigabit Server Adapter	394793-B21
	HP NC373T PCI Express Multifunction Gigabit Server Adapter	394791-B21
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs

Tape Drives	NOTE: For the complete listing of Tape Drive offerings, please see: http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
	USB Rack-Mount Tape Solutions
	HP StorageWorks 1U USB Rack-Mount Kit with one DAT 160 USB Tape Drive	AG703A
	SAS Rack-Mount Tape Solutions NOTE: HP recommends purchasing the HP SC44Ge HBA (416096-B21) for a dedicated SAS HBA for tape.
	HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A)	DW085A
	SCSI Rack-Mount Tape Solutions NOTE: SCSI Controller required. HP recommends purchasing the HP SC11Xe HBA (412911-B21) for a dedicated SCSI HBA for tape.
	HP StorageWorks 1U SCSI Rack-mount kit with one LTO-2 Ultrium 448 SCSI Tape Drive (Carbonite) NOTE: Pre-configured with one LTO-2 Ultrium 448 SCSI tape drive.	DW028B

Disk-Based Backup	RDX Removable Disk Backup
	HP StorageWorks RDX160 External Removable Disk Backup System NOTE: 160GB of Disk Storage.	AJ766A
	HP StorageWorks RDX320 External Removable Disk Backup System NOTE: 320GB of Disk Storage.	AJ768A
	NOTE: Please see the HP RDX Removable Disk Backup System QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/13036_div/13036_div.html
	D2D Backup
	HP StorageWorks D2D120 Backup System with Data Protector Express Software Kit NOTE: 2TB of Disk Storage.	EH924A
	HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive NOTE: 3TB of Disk Storage.	EH952A
	HP StorageWorks D2D2503i Backup System NOTE: 3TB of Disk Storage.	D2D2503i
	NOTE: Please see the HP D2D Backup Systems QuickSpecs for additional information: http://www.hp.com/go/d2d

HP StorageWorks 20 Modular Smart Array	HP StorageWorks 20 Modular Smart Array NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant power supplies.	335921-B21
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11942_div/11942_div.html (Worldwide)

HP StorageWorks 60 Modular Smart Array	HP StorageWorks 60 Modular Smart Array Enclosure	418408-B21
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12627_div/12627_div.html

HP StorageWorks 70 Modular Smart Array	HP StorageWorks 70 Modular Smart Array Enclosure	418800-B21
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12652_div/12652_div.html

StorageWorks Options	NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed compatibility information please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.html
	HP StorageWorks FC2142SR 4Gb PCI-e HBA	A8002A
	HP StorageWorks FC2242SR Dual Channel 4 Gb PCI-e HBA	A8003A
	HP StorageWorks FC1142SR 4Gb PCI-e HBA	AE311A
	HP StorageWorks FC1242SR Dual Channel 4 Gb PCI-e HBA	AE312A
	HP StorageWorks FC2143 4Gb PCI-X 2.0 -to-Fibre Channel HBA	AD167A
	HP StorageWorks FC2243 Dual Channel 4Gb PCI-X 2.0 HBA	AD168A
	HP StorageWorks FC1143 4Gb PCI-X 2.0 HBA	AB429A
	HP StorageWorks FC1243 Dual Channel 4Gb PCI-X 2.0 HBA	AE369A

Uninterruptible Power Systems – Rack	HP UPS R1500 G2
	HP, R1.5kVA UPS, 1U, NA	AF419A
	HP, R1.5kVA UPS, 1U, INTL	AF418A
	HP, R1.5kVA UPS, 1U, JPN/TW	AF421A
	NOTE: Please see QuickSpecs Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12507_div/12507_div.html (Worldwide)
	HP UPS R3000 Uninterruptible Power System
	HP R3000 VA UPS, 2U, DTC, INTL	AF414A
	HP R3000 VA UPS, 2U, L5-30, NA	AF422A
	HP R3000 VA UPS, 2U, L6-20, NA	AF423A
	HP R3000 VA UPS, 2U, L6-20, JPN	AF424A
	HP R3000 VA UPS, 2U, L5-30, JPN	AF425A
	NOTE: Please see QuickSpecs Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/10671_div/10671_div.html (Worldwide)
	HP R3000v UPS Uninterruptible Power System
	HP R3000v UPS	AF444A
	NOTE: Please see QuickSpecs Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13129_div/13129_div.html (Worldwide)
	HP UPS R5500 Uninterruptible Power System
	HP R5500 VA UPS, INTL	AF416A
	HP R5500 VA UPS, NA/JPN	AF426A
	NOTE: Please see QuickSpecs Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11871_div/11871_div.html (Worldwide)

USB Options	USB 1.44-MB External Diskette Drive (Carbonite)	DC141B
	HP 1GB USB 2.0 Floppy Drive Key	442085-B21
	HP 256MB USB 2.0 Floppy Drive Key	442084-B21

ProLiant DL120 Deployment Options	Rack Adapter Kit NOTE: This kit allows HP rack servers to fit in racks that are 24" wide.	332815-B21

HP Rack 5000 Series (Metallic Carbonite)	HP 5642 Rack-Unassembled	358254-B21
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12074_div/12074_div.html (Worldwide) NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.hp.com/go/rackandpower.

HP Rack 10000 G2 Series (Graphite Metallic)	10642 G2 (42U) Rack Cabinet – Pallet	AF001A
	10642 G2 (42U) Rack Cabinet – Shock Pallet	AF002A
	10642 G2 (42U) Rack Cabinet – Crated	AF003A
	10642 G2 (42U) Rack Cabinet, with Extension – Shock Pallet	AF004A
	10636 G2 (36U) Rack Cabinet – Pallet	AF011A
	10636 G2 (36U) Rack Cabinet – Shock Pallet	AF012A
	10636 G2 (36U) Rack Cabinet – Crated	AF013A
	10636 G2 (36U) Rack Cabinet, with Extension – Shock Pallet	AF014A
	10622 G2 (22U) Rack Cabinet - Pallet	AF021A
	10622 G2 (22U) Rack Cabinet - Shock Pallet	AF022A
	10842 G2 (42U) 800mm Wide Rack Cabinet - Pallet	AF041A
	10842 G2 (42U) 800mm Wide Rack Cabinet - Shock Pallet	AF042A
	10647 G2 (47U) Rack Cabinet - Pallet	AF031A
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html (Worldwide)
	NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.hp.com/go/rackandpower.

HP Rack 10000 Series (Graphite Metallic)	HP S10614 (14U) Rack Cabinet – Shock Pallet	292302-B22
	NOTE: xxxxxx-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels). NOTE: It is mandatory to use a shock pallet in order to ship racks with equipment installed.
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/10995_div/10995_div.html (Worldwide)
	NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.hp.com/go/rackandpower.

Monitors and Keyboards	TFT7600 Rackmount Keyboard Monitor US	AG052A
	TFT7600 Rackmount Keyboard Monitor UK	AG053A
	TFT7600 Rackmount Keyboard Monitor GR	AG054A
	TFT7600 Rackmount Keyboard Monitor FR	AG055A
	TFT7600 Rackmount Keyboard Monitor IT	AG056A
	TFT7600 Rackmount Keyboard Monitor SP	AG057A
	TFT7600 Rackmount Keyboard Monitor DEN	AG058A
	TFT7600 Rackmount Keyboard Monitor NOR	AG059A
	TFT7600 Rackmount Keyboard Monitor SE/FI	AG060A
	TFT7600 Rackmount Keyboard Monitor SWI	AG061A
	TFT7600 Rackmount Keyboard Monitor PORT	AG062A
	TFT7600 Rackmount Keyboard Monitor BEL	AG063A
	TFT7600 Rackmount Keyboard Monitor JPN2	AG064A
	TFT7600 Rackmount Keyboard Monitor RUS	AG065A
	TFT7600 Rackmount Keyboard Monitor INTL	AG066A
	1U Rackmount Keyboard with USB, US	AG072A
	1U Rackmount Keyboard with USB, UK	AG073A
	1U Rackmount Keyboard with USB, GR	AG074A
	1U Rackmount Keyboard with USB, FR	AG075A
	1U Rackmount Keyboard with USB, ITL	AG076A
	1U Rackmount Keyboard with USB, SP	AG077A
	1U Rackmount Keyboard with USB, DEN	AG078A
	1U Rackmount Keyboard with USB, NOR	AG079A
	1U Rackmount Keyboard with USB, SE/FI	AG080A
	1U Rackmount Keyboard with USB, SWI	AG081A
	1U Rackmount Keyboard with USB, PORT	AG082A
	1U Rackmount Keyboard with USB, BEL	AG083A
	1U Rackmount Keyboard with USB, JPN2	AG084A
	1U Rackmount Keyboard with USB, RUS	AG085A
	1U Rackmount Keyboard with USB, INTL	AG086A
	NOTE: For additional information regarding Rack Options, please see the following URL: http://www.hp.com/go/rackandpower.

HP KVM Switch Options	2x1x16 IP Console Switch with Virtual Media	AF601A
	4x1x16 IP Console Switch with Virtual Media	AF602A
	PS/2 Virtual Media Interface Adapter, 1 pack NOTE: Requires PS/2 and one USB port on server.	AF604A
	Server Console Switch (KVM), 0 x 1 x 8 port	336044-B21
	Server Console Switch (KVM), 0 x 2 x 16 port	336045-B21
	PS/2 Interface Adapter, 1 pack	262588-B21
	PS/2 Interface Adapter, 8 pack	262587-B21
	NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches. Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm.
	HP 1x4 Console Switch	AF611A
	PS2 Server Console Cable, 6 ft, 2 pack	AF612A
	USB Server Console Cable, 6 ft, 2 pack	AF613A
	NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.

HP Serial Console Server Options	HP 16 Port Serial Console Server (worldwide)	AF101A
	HP 48 Port Serial Console Server (worldwide)	AF102A
	Serial Adapter, RJ45-DB9 DCE Female, 1 Pack	AF103A
	Serial Adapter, RJ45-DB9 DCE Female, 8 Pack	AF110A
	NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console Servers. Additional Serial Adapters and Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm.
	NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.

Service and Support Offerings (HP Care Pack Services)	Hardware Services On-site Service
	4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic	UJ252E
	4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic	UJ253E
	Hardware Services Next Business Day On-Site Service
	9-Hour x 5-Day Coverage, 3 Years, Electronic	UJ251E
	Installation & Start-up Services
	Hardware Services 6-Hour Call to Repair On-Site Service	UJ254E
	Hardware Installation, Electronic	UJ261E
	NOTE: For more information, customer/resellers can contact: http://www.hp.com/hps/

Memory

HP ProLiant DL120 G5

Standard Memory
NOTE: One of the following depending on model:
1 GB installed (1 x 1 GB SDRAM DIMM) on Dual-Core (E2160 and 3065) models.
2 GB installed (2 x 1 GB SDRAM DIMMs) on Quad-Core (X3320) model.

Standard Memory Plus Optional Memory
Up to 8 GB memory is available with the optional installation of PC2-6400 ECC DDR2 SDRAM Memory kits.

NOTE: The chart below does not represent all possible configurations. For best performance, HP recommends dual-bank interleaved mode configurations. For dual-bank interleaved mode, DIMMs must be installed in both banks with equal bank capacities.

Memory		Slot
		DIMM_CH1_C	DIMM_CH1_A	DIMM_CH2_D	DIMM_CH2_B	Mode
Optional	512 MB	Empty	512 MB	Empty	Empty	Single-bank
Standard	1 GB	Empty	1 GB	Empty	Empty	Single-bank
Optional	1 GB	Empty	512 MB	Empty	512 MB	Dual-bank interleaved
Standard	2 GB	Empty	1 GB	Empty	1 GB	Dual-bank interleaved
Maximum	8 GB	2 GB	2 GB	2 GB	2 GB	Dual-bank interleaved

Following are memory options available from HP:
2 GB Unbuffered PC2-6400 ECC DIMM (1 x 2 GB)	450260-B21
1 GB Unbuffered PC2-6400 ECC DIMM (1 x 1 GB)	450259-B21
512 MB Unbuffered PC2-6400 ECC DIMM (1 x 512 MB)