contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Overview

HP ProLiant DL165 Generation 5 (G5)

Hot Plug SAS/SATA or Non-Hot Plug SATA Models
Front View:Rear View:
1.Access panel1.Power supply cable socket
2.Memory banks2.PS/2 mouse port
3.Two (2) AMD Opteron 2300 series processors3.PS/2 keyboard port
4.Power supply4.Two (2) RJ45 GbE LAN ports
5.Low-profile PCI-Express or PCI-X slot5.Rear panel USB 2.0 ports
6.
System fans
6.Lights-Out 100 10/100Mbps port
7.Optical drive bay7.Video port
8.Front-panel USB 2.0 ports8.Serial port
9.Power switch/system status LEDs9.Low-profile riser board assembly slot cover
10.Optional 3rd and 4th 3.5" hot-plug SAS/SATA or non-hot plug SATA hard drive bays10.Full-sized riser board assembly slot cover
11.Standard 1st and 2nd 3.5" hot-plug SAS/SATA or non-hot plug SATA hard drive bays  
12.Full height/full length PCI-Express or HTX slot  

What's New
  • Support for two AMD Opteron™ 2300 series Quad-Core processors
  • Support for HP REG PC2-6400 Memory

At A Glance

Introducing the HP ProLiant DL165G5, now available with the latest high performance Opteron Quad Core processors, increased storage by 2X and a new high efficiency power supply option.

  • Processors:
    • Supports up to two AMD Opteron™ 2300 series Quad-Core processors
    • Supports DirectConnect Architecture
    • Supports Power Now
  • Memory:
    • 8 DIMM slots supporting up to 32GB REG PC2-6400 DDR2-667 MHz memory with Advanced ECC
    • 8 DIMM slots supporting up to 32GB REG PC2-5300 DDR2-667 MHz memory with Advanced ECC
  • Internal Drive Support:
    • Internal storage capacity:
      • SATA Capacity: Support for up to 4.0TB (4 x 1TB)
      • SAS Capacity: Support for up to 4.0 TB (4 x 1TB)
      • NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only.
  • Network Controller:
    • Embedded NC7782 dual-port gigabit server adapter
  • Storage Controllers:
    • Non-Hot Plug SATA Models: HP Embedded SATA Controller
    • Hot Plug SATA/SAS Models: HP SC40Ge SAS HBA with RAID 0,1
  • Expansion Slots:
    • Standard - PCI-Express assembly includes:
      • Slot 1: full-length/full height PCI-Express x16
      • Slot 2: half-length/low-profile PCI-Express x4 (x8 connector)
    • Optional - PCI-X assembly includes:
      • Slot 2: half-length/low-profile PCI-X 133 (note: PCI-X slots are 64 bits; 133 MHz capable)
    • Optional - HTX assembly includes: Slot 1: full-length/full height HTX
  • Management:
    • HP ProLiant Lights Out 100i Remote Management support (IPMI 2.0 and SMASH support)
    • Virtual Media plus Virtual KVM support with LO100i Advanced license
  • USB Ports:
    • Up to five USB ports (two front & two rear standard, 1 internal option)
  • Optical Drive:
    • Support for one (optional): DVD-ROM, DVD/CD RW
  • Power Supply:
    • 650W Power Supply (Non-Hot Plug, Autoswitching)
  • Form Factor:
    • Rack (1U)
    • Fixed mounting rails included with all models
  • Deployment/Serviceability:
    • Tool-less access to all system components for easy in-rack serviceability
    • Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
  • Warranty:
    • This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives have a one year warranty. SAS hard drives have a three year warranty.
    • NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Standard Features

NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA1-5494ENW.pdf
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section.

Processor
One of the following depending on Model

AMD Opteron™ processor Model 2384 (2.7GHz, 75W ACP)
NOTE: Offered through Configure-To-Order only. See Factory Integrated Models section for more details.
AMD Opteron™ processor Model 2380 (2.5GHz, 75W ACP)
AMD Opteron™ processor Model 2376 (2.3GHz, 75W ACP)
NOTE: Offered through Configure-To-Order only. See Factory Integrated Models section for more details.
AMD Opteron™ processor Model 2360 SE (2.5 GHz, 105W ACP)
NOTE: Offered through Configure-To-Order only. See Factory Integrated Models section for more details.
AMD Opteron™ processor Model 2356 (2.3 GHz, 75W ACP)
AMD Opteron™ processor Model 2354 (2.2 GHz,75W ACP)
NOTE: Offered through Configure-To-Order only. See Factory Integrated Models section for more details.
AMD Opteron™ processor Model 2352 (2.1 GHz, 75W ACP)
AMD Opteron™ processor Model 2346 HE (1.8 GHz, 55W ACP)
AMD Opteron™ processor Model 2344 HE (1.7 GHz, 55W ACP)
NOTE: Offered through Configure-To-Order only. See Factory Integrated Models section for more details.

Upgradeability Upgradeable to two processors

ChipsetServerWorks HT2100 and HT1000

Cache Memory Model Series 234x to 236x
128K dedicated L1 per core
512K dedicated L2 per core
2MB shared L3
Model Series 237x to 238x
6MB shared L3

Memory Protection Advanced ECC

Memory
One of the following depending on Model
Type REG PC2-6400 DIMMs (DDR2-667)
REG PC2-5300 DIMMs (DDR2-667)
Standard 2 GB (2 x 1 GB)
Maximum 32 GB (8 x 4 GB)

Network Controller Embedded NC7782 dual-port gigabit server adapter

Expansion Slots #
Technology
Bus Width**
Connector Width
Bus Number*
Form Factor
Notes
1
PCI Express
x16
x16
3
Full Height/Full Length
1
HTX
N/A
N/A
9
Full Height/Full Length
2
PCI Express
x4
x8
6
Low-profile
2
PCI-X
64-bit, 133MHz
N/A
2
Low-profile
 * Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus).

Storage Controller Non-Hot Plug SATA HP Embedded SATA Controller
Hot Plug SATA/SAS HP SC40Ge SAS HBA with RAID 0,1
NOTE: A diskette drive is needed to install storage controller drivers during a Windows operating system installation from CD.

Storage Diskette Drives Via USB only
Optical Drives Optional 8x IDE (ATAPI) DVD-ROM drive, slim
Optional 24x IDE (ATAPI) DVD-ROM/CDRW drive
Hard Drives Up to 4 Non-hot plug SATA 3.5" drives
Up to 4 Hot plug SATA /SAS 3.5" drives

Maximum Internal Storage
Non-Hot Plug SATA 3.0TB4 x 750GB
Hot Plug SATA4.0TB 4 x 1TB
Hot Plug SAS4.0TB 4 x 1TB

Interfaces Parallel None
Network RJ-45(Ethernet) Embedded NC7782 dual-port gigabit server adapter
Serial 1
Pointing Device (Mouse) 1
Graphics 1
Keyboard

1

USB Up to 5 (two front & two rear standard, 1 internal option)
NOTE: Please see the following URL for additional information regarding USB support:
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html.

Graphics 32MB shared supporting 1600x1200x16M resolution

Form Factor Rack (1U), (1.75 in/4.45 cm)

Server Management Stand Alone Software Product and  ProLiant EssentialsLights-Out 100i

HP Lights-Out 100i Remote Management delivers affordable, entry level remote management capabilities for HP ProLiant 100 Series servers with embedded LO100i. It allows customers or their service providers to remotely manage ProLiant 100 Series servers remotely over a LAN or the Internet and consists of the following:

  • LO100i Standard is embedded remote management and provides basic remote control via telnet, browser, and IPMI 2.0 and SMASH and comes standard on all DL100 series servers except for the DL180 G1 and G5 and the DL120 G5 servers.
  • LO100i Advanced Pack License are upgrades for all the features of LO100i Select plus Virtual KVM (graphical hardware-based, remote console).

NOTE: Flexible and volume quantity (AKA) license kits are available for the Lights-Out 100i Advanced Pack licenses as well as Electronic License To Use (E-LTU). AKA Tracking licenses require a 100 unit minimum forecast at initial contract signing. For these additional part numbers, please refer to each software products' QuickSpecs at this link for more information: http://h18004.www1.hp.com/products/servers/management/
remotemgmt.html
.

ProLiant Essentials Rapid Deployment Pack

Rapid Deployment Pack (RDP) extends HP Systems Insight Manager with a complete deployment solution for HP ProLiant servers. RDP provides a central location to configure server hardware, deploy Windows, Linux and VMware ESX operating environments and install using images and scripted profiles. For more information, visit: http://www.hp.com/go/rdp.
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Rapid Deployment Packs. For additional information, please refer http://www.hp.com/go/proliantessentials.


Core Infrastructure ManagementSubscriber's Choice

Subscriber's Choice Driver and Support Alerts/Notifications is a web-based email subscription service that provides software and driver change notifications for ProLiant products. Sign up at: http://www.hp.com/go/subscriberschoice and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis.

ROMPaq software and latest driversThe latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options, available through ProLiant Support Packs the ProLiant Essentials Rapid Deployment Pack, SmartStart or downloaded from software and drivers download pages website at: http://www.hp.com/go/support.

HP Serviceguard for Linux (SGLX)

HP Serviceguard for Linux is a high availability clustering solution designed to protect applications and services from a wide variety of software and hardware failures, monitoring the health of each server (node) and quickly responding to failures such as those that affect system processes, system memory, LAN media and adapters, and application processes.
The following is a quick summary of HP Serviceguard for Linux features and support. For the most recent list of Linux distributions & kernels, servers and storage supported with Serviceguard for Linux, see the Serviceguard for Linux Datasheet, available at: http://www.hp.com/go/sglx/info.

  • Supported Linux Distributions:
    • Red Hat EL 4
    • Red Hat EL 5
    • SUSE SLES10
  • Supported Server Platforms
    • HP Integrity BladeSystem to Superdome
    • HP ProLiant BladeSystem p-Class & c-Class
    • HP ProLiant DL
    • HP ProLiant ML
    • IBM System x
    • IBM BladeCenter
    • Dell PowerEdge
    • Sun x64
    • Fujitsu Siemens PRIMERGY
  • Hypervisors
    • VMware ESX
  • Application Integration Toolkits
    • HP Serivceguard for Linux Oracle Database Toolkit
    • HP Serviceguard Extension for SAP on Linux (SGeSAP/LX)
    • Free Application Integration Toolkits:
      • Apache
      • MySQL
      • NFS
      • PostgreSQL
      • Samba
      • Tomcat
      • Sendmail
  • Disaster Tolerant Solutions
    • HP Serviceguard for Linux Extended Distance Cluster (XDC) extends cluster distances up to 100 km, utilizes software RAID mirroring for data replication and is storage array independent
    • HP StorageWorks XP/EVA Cluster Extension Software for Linux (CLX) works seamlessly with HP Serviceguard for Linux, HP StorageWorks Continuous Access, and HP Disk Arrays to automate failover and failback between sites
  • Software updates are distributed by HP Services to customers with support contracts

NOTE: For additional information on HP Serviceguard for Linux, visit: http://www.hp.com/go/sglx or see the HP Serviceguard for Linux QuickSpecs.
NOTE: HP Serviceguard for Linux products for HP ProLiant and select 3rd party x86 class servers include one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/swsupport.


Industry Standard Compliance ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0 Compliant

Manageability

Embedded HP ProLiant Lights-Out 100i Remote Management, with licensable upgrades to Lights-Out 100i Advanced.


Security Power-on password
Setup password

UPS and PDU Power
Cord Matrix
Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications for UPS and PDU units:
http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/index.html.

Power Supply 650 Watts, auto-switching, PFC (Power Factor Correcting)

System Fans 6 system fans ship standard; non-hot plug, non-redundant

OS Support

Microsoft Windows Small Business Server 2003 R2
Microsoft Windows 2003 R2
Microsoft Windows Server 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
Sun Solaris for x64/x86-based Systems

NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/supportos.

Rack Airflow RequirementsRack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 7 cm (2.75 inches)

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

Rack Support The DL Fixed Rail System supports installation in racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24" - 36". Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit. For additional information, please visit: www.racksolutions.com.

HP Factory Express Capability

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to http://www.hp.com/go/factory-express.


HP Enterprise Configurator

The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.


Service and Support

HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service - Simplify ProLiant solution implementation, maintenance and management.

  • Support Service -3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
  • Deployment Service - Hardware Installation only

Enhanced Service - Optimize service level to increase IT performance and availability

  • Support Service - 3 Year 13x5 Same Business Day, 4-Hour response coverage
  • Deployment Service - Installation and Start-up only

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

HPC Interconnects

NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL165 G5 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to configure HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects: http://www.hp.com/techservers/clusters/ucp/index.html

HPC Interconnects InfiniBand PCI-X and PCI-Express adapters
Gigabit Ethernet Use embedded ports or optional 10GbE NICs
Myrinet XP PCI-X Rev D, Rev E and Rev F adapters
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Models

Non-Hot Plug Serial ATA (SATA) Models

HP DL165 G5 2346HE 1.8GHz, 2GB, Non-Hot Plug SATA (1P)
464207-xx1

HP DL165 G5 2352 2.1 GHz, 2GB, Non-Hot Plug SATA (1P)

445153-xx1

HP DL165G5 2356 2.3GHz, 4GB, Non-Hot Plug (1P)

445161-xx1

Processor(s)
One of the following depending on model

(1) AMD Opteron™ processor Model 2346HE (1.8 GHz, 55W ACP)
(1) AMD Opteron™ processor Model 2352 (2.1 GHz,75W ACP)
(1) AMD Opteron™ processor Model 2356 (2.3 GHz, 75W ACP)
Cache Memory2MB shared Level 3 cache
Memory
One of the following depending on model
2GB (2 x 1GB) Registered PC2-5300 DDR2 DIMMs (667MHz) with Advanced ECC capabilities
4GB (2 x 2GB) Registered PC2-5300 DDR2 DIMMs (667MHz) with Advanced ECC capabilities
Network ControllerEmbedded NC7782 dual-port gigabit server adapter
Storage ControllerHP Embedded SATA Controller
Hard Drive(1) 160GB NHP SATA HDD
Internal Storage SATA: 3TB maximum
Optical DriveOptional DVD-ROM, DVD/CD RW
Form FactorRack (1U)

Hot Plug Serial ATA (SATA)/Serial Attached SCSI (SAS) Models

HP DL165G5 2380 2.5 GHz, 4GB, Hot Plug (1P)
507555-xx1

HP DL165G5 2346HE 1.8 GHz, 2GB, Hot Plug (1P)
464208-xx1

HP DL165 G5 2352 2.1 GHz, 2 GB Hot Plug SAS/SATA (1P)

445164-xx1

HP DL165G5 2356 2.3 GHz, 4 GB, Hot Plug (1P)

445162-xx1

Processor(s)
One of the following depending on model

(1) AMD Opteron™ processor Model 2380 (2.5 GHz, 75W ACP)
(1) AMD Opteron™ processor Model 2346HE (1.8 GHz, 55W ACP)
(1) AMD Opteron™ processor Model 2352 (2.1 GHz,75W ACP)
(1) AMD Opteron™ processor Model 2356 (2.3 GHz, 75W ACP)

Cache Memory 2MB shared Level 3 cache (Processor Series 234x to 236x)
6MB shared Level 3 cache (Processor Series 237x to 238x)
Memory
One of the following depending on model
2 GB (2 x 1GB) Registered PC2-5300 DDR2 DIMMs (667MHz) with Advanced ECC capabilities
4GB (2 x 2GB) Registered PC2-5300 DDR2 DIMMs (667MHz) with Advanced ECC capabilities
4GB (2 x 2GB) Registered PC2-6400 DDR2 DIMMs (800MHz) with Advanced ECC capabilities
Network Controller Embedded NC7782 dual-port gigabit server adapter
Storage Controller HP 8 Internal Port SAS HBA with RAID
Hard Drive None ship standard (up to 4 Hot Plug SATA or SAS drives supported)
Internal Storage
One of the following depending on model
SATA: 4.0TB Maximum
SAS: 4.0TB Maximum
Optical Drive Optional DVD-ROM, DVD/CD RW
Form Factor Rack (1U)

Country Code Key xx = 00 U.S.
xx = 20 Brazil
(Model 445164-201 only)
xx = 29 Japan
xx = 37 APD
xx = 42 Euro
xx = AA PRC
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator.  Contact your local sales representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is only available as a Factory Installable Option.

Step 1: Base Configuration
  Non-Hot Plug SATA Model
HP ProLiant DL165 G5 Non-Hot Plug SATA Rack Chassis
445147-B21
Factory Integrated Model ships with:
Embedded NC7782 dual-port gigabit server adapter

Two available PCI-Express slots, including one full-length/full height and one low-profile/half height slot

HP embedded SATA controller
650 Watt Power Supply
6 Fixed, Non-Redundant Fans
Rack (1U), (1.75 in / 4.45 cm)
Fixed Mounting Rails
Hot Plug SATA/SAS Model
HP ProLiant DL165 G5 Hot Plug SATA/SAS Rack Chassis
445148-B21
Factory Integrated Model ships with:
Embedded NC7782 dual-port gigabit server adapter
One full-length/full height PCI-Express slot. Low-profile/half height slot houses the SATA/SAS storage controller
650 Watt Power Supply
6 Fixed, Non-Redundant Fans
Rack (1U), (1.75 in / 4.45 cm)
Fixed Mounting Rails

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)
Processors AMD Opteron™ processor Model 2384 (2.7GHz, 75W ACP), FIO
NOTE: If 2 processors are desired, select one 500064-L21 and one 500064-B21.
500064-L21

AMD Opteron™ processor Model 2380 (2.5GHz, 75W ACP), FIO
NOTE: If 2 processors are desired, select one 500060-L21 and one 500060-B21.

500060-L21

AMD Opteron™ processor Model 2376 (2.3GHz, 75W ACP), FIO
NOTE: If 2 processors are desired, select one 500056-L21 and one 500056-B21.

500056-L21
AMD Opteron™ processor Model 2360 SE (2.5 GHz, 105W ACP), Option Kit, FIO
NOTE: If 2 processors are desired, select one 445983-L21 and one 445983-B21.
445983-L21
AMD Opteron™ processor Model 2356 (2.3 GHz, 75W ACP), Option Kit, FIO
NOTE: If 2 processors are desired, select one 445981-L21 and one 445981-B21.
445981-L21
AMD Opteron™ processor Model 2354 (2.2 GHz, 75W ACP), Option Kit, FIO
NOTE: If 2 processors are desired, select one 445974-L21 and one 445974-B21.
445974-L21
AMD Opteron™ processor Model 2352 (2.1 GHz, 75W ACP), Option Kit, FIO
NOTE: If 2 processors are desired, select one 445971-L21 and one 445971-B21.
445971-L21
AMD Opteron™ processor Model 2346HE (1.8 GHz, 55W ACP), Option Kit, FIO
NOTE: If 2 processors are desired, select one 464210-L21 and one 464210-B21.
464210-L21
AMD Opteron™ processor Model 2344 HE (1.7 GHz, 55W ACP), Option Kit, FIO NOTE: If 2 processors are desired, select one 492086-L21 and one 492086-B21. 492086-L21

Memory 1 GB REG PC2-5300 2 x 512 MB Single Rank Kit
408850-B21
2 GB REG PC2-6400 2 x 1 GB Kit 497763-B21
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit
408851-B21
2 GB REG PC2-5300 2 X 1 GB Low Power Single Rank Kit
483399-B21
4 GB REG PC2-6400 2 x 2 GB Kit 497765-B21
4 GB REG PC2-5300 2 X 2 GB Low Power Single Rank Kit 483401-B21
4 GB REG PC2-5300 2 x 2 GB Dual Rank Kit 408853-B21
8 GB REG PC2-6400 2 x 4 GB Kit 497767-B21
8 GB REG PC2-6400 2 x 4 GB Low Power Kit 504351-B21
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit 408854-B21
8 GB REG PC2-5300 2X 4 GB Low Power Dual Rank Kit 483403-B21

Hard Drive Serial-ATA (SATA) Non-Hot Plug Hard Drives (Non-Hot Plug Models Only)
SATA Non-Hot Plug Entry (ETY) Drives
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD
458947-B21
SATA Non-Hot Plug Midline (MDL) Drives
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD 462595-B21
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD 458941-B21
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD
458939-B21
Serial-ATA (SATA) Hot Plug Hard Drives (SATA/SAS Hot Plug Models Only)
SATA Hot Plug Entry (ETY) Drives
HP 160GB 3G SATA 7.2K 3.5" ETY HDD
458945-B21
SATA Hot Plug Midline (MDL) Drives
HP 1TB 3G SATA 7.2K 3.5" MDL HDD 454146-B21
HP 750GB 3G SATA 7.2K 3.5" MDL HDD 458930-B21
HP 500GB 3G SATA 7.2K 3.5" MDL HDD 458928-B21
HP 250GB 3G SATA 7.2K 3.5" MDL HDD
458926-B21
SAS Enterprise (ENT) Drives 3.5" Drives, Hot Plug  
HP 450GB 3G 15K 3.5" DP SAS ENT HDD 454232-B21
HP 400GB 3G 10K 3.5" DP SAS ENT HDD 459508-B21
HP 300GB 3G SAS 15K 3.5" SP HDD 431944-B21
HP 300GB 3G SAS 15K 3.5" DP HDD 416127-B21
HP 146GB 3G SAS 15K 3.5" SP HDD 375872-B21
HP 146GB 3G SAS 15K 3.5" DP HDD 384854-B21
HP 72GB 3G SAS 15K 3.5" DP HDD 384852-B21
HP 72GB 3G SAS 15K 3.5" SP HDD 375870-B21
SAS Midline (MDL) Drives 3.5" Drives, Hot Plug  
HP 1TB 7.2K 3.5" DP SAS MDL HDD 461137-B21
HP 750GB 7.2K 3.5" DP SAS MDL HDD 461135-B21
NOTE: The purchase of an HP SAS HBA or Smart Array controller is required for proper operation of SAS drives.  
Backplane Option Hot Plug HDD Backplane 1U 2S Kit
NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only in Step 1 above.
445985-B21

Storage ControllersNOTE: Supports Hot Plug model (P/N 445148-B21) only in Step 1 above. 
HP SC44Ge Host Bus Adapter
416096-B21
HP SC40Ge 4INT PCIe SAS RAID Half Height HBA, FIO
449363-B21

HP Smart Array E500/256MB Controller with Battery, FIO
NOTE: Customers can only order one Smart Array E500/256MB Controller and one Battery-backed write cache upgrade (P/N 383280-B21) for the HP ProLiant DL165 G5 server based on battery space.

462105-B21
256MB Battery-backed write cache upgrade for RAID 5 support
NOTE: when installing a battery-backed write cache module, the HP Smart Array E500 must be installed in the full-length PCI slot
383280-B21
HP Smart Array E200/128 BBWC Controller
411508-B21

Power Supply

HP High Efficiency Power Supply Kit, FIO
NOTE: Selection of the HE Power Supply Unit will remove the 650 Watt standard power supply and requires the purchase of Power Supply Backplane (P/N 453652-B21)

453650-B21
Power Supply Backplane
NOTE: This backplane must be ordered with the high efficiency power supply (P/N 453650-B2).
453652-B21

Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Options" section below. Some options may not be available for factory integration. Please contact an HP sales representative for additional information.
contents
 Overview      Standard Features      HPC Interconnects      Models      Configuration Information - Factory Integrated Models      Options      Memory      Storage      Power Specifications      Technical Specifications line.gif (50 bytes)

Options

Server Management Stand Alone Software Product and ProLiant Essentials

NOTE: Electronic licensing options are available for Insight Control suites and select ProLiant Essentials software products. Please see the appropriate Insight Control and ProLiant Essentials QuickSpecs for additional information.
Control
HP Lights-Out 100i Advanced Pack
HP LO100i Advanced Pack, No Media, 1-Server License
NOTE: Supports HP ProLiant DL 160 G5, DL165 G5 and DL185 G5 servers.
455342-B21
NOTE: Flexible and volume quantity (AKA) license kits are available for the Lights-Out 100i Advanced Pack licenses as well as Electronic License To Use (E-LTU). AKA Tracking licenses require a 100 unit minimum forecast at initial contract signing. For these additional part numbers, please refer to QuickSpecs at this link for more information: http://h18004.www1.hp.com/products/servers/management/remotemgmt.html
DEPLOY
Rapid Deployment Pack
ProLiant Essentials Rapid Deployment Pack No Media 1-Server License including 1 year of 24x7 Technical Support and Updates
NOTE: This license allows 1 server to be deployed and managed via RDP. Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.
452151-B21
NOTE: For additional license kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11053_div/11053_div.html
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to: http://www.hp.com/go/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/go/proliantessentials.
 

Processor AMD Opteron™ processor Model 2384 SE (2.7GHz, 75W ACP) 500064-B21
AMD Opteron™ processor Model 2380 SE (2.5GHz, 75W ACP)
500060-B21
AMD Opteron™ processor Model 2376 SE (2.3GHz, 75W ACP) 500056-B21
AMD Opteron™ processor Model 2360 SE (2.5GHz, 105W ACP) 445983-B21
AMD Opteron™ processor Model 2356 (2.3 GHz, 75W ACP)
445981-B21
AMD Opteron™ processor Model 2354 (2.2 GHz, 75W ACP) 445974-B21
AMD Opteron™ processor Model 2352 (2.1 GHz, 75W ACP) 445971-B21
AMD Opteron™ processor Model 2346HE (1.8 GHz, 55W ACP) 464210-B21
AMD Opteron™ processor Model 2344 HE (1.7 GHz, 55W ACP) 492086-B21

Memory (DIMMs)

1 GB REG PC2-5300 2 x 512 MB Single Rank Kit 408850-B21
2 GB REG PC2-6400 2 x 1 GB Kit 497763-B21
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit 408851-B21
2 GB REG PC2-5300 2 X 1 GB Low Power Single Rank Kit 483399-B21
4 GB REG PC2-6400 2 x 2 GB Kit 497765-B21
4 GB REG PC2-5300 2 X 2 GB Low Power Single Rank Kit 483401-B21
4 GB REG PC2-5300 2 x 2 GB Dual Rank Kit 408853-B21
8 GB REG PC2-6400 2 x 4 GB Kit 497767-B21
8 GB REG PC2-6400 2 x 4 GB Low Power Kit 504351-B21
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit 408854-B21
8 GB REG PC2-5300 2 X 4 GB Low Power Dual Rank Kit 483403-B21

Hard Drives Serial-ATA (SATA) Non-Hot Plug Hard Drives (Non-Hot Plug Models Only)  
SATA Non-Hot Plug Entry (ETY) Drives  
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD 458947-B21
SATA Non-Hot Plug Midline (MDL) Drives  
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD 462595-B21
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD 458941-B21
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD 458939-B21
Serial-ATA (SATA) Hot Plug Hard Drives (SATA/SAS Hot Plug Models Only)  
SATA Hot Plug Entry (ETY) Drives  
HP 160GB 3G SATA 7.2K 3.5" ETY HDD 458945-B21
SATA Hot Plug Midline (MDL) Drives  
HP 1TB 3G SATA 7.2K 3.5" MDL HDD 454146-B21
HP 750GB 3G SATA 7.2K 3.5" MDL HDD 458930-B21
HP 500GB 3G SATA 7.2K 3.5" MDL HDD 458928-B21
HP 250GB 3G SATA 7.2K 3.5" MDL HDD 458926-B21
NOTE: SATA hard drives have a 1-year warranty. Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide).
 
SAS Enterprise (ENT) Drives 3.5" Drives, Hot Plug  
HP 450GB 3G 15K 3.5" DP SAS ENT HDD 454232-B21
HP 400GB 3G 10K 3.5" DP SAS ENT HDD 459508-B21
HP 300GB 3G SAS 15K 3.5 SP HDD 431944-B21
HP 300GB 3G SAS 15K 3.5" DP HDD 416127-B21
HP 146GB 3G SAS 15K 3.5" SP HDD 375872-B21
HP 146GB 3G SAS 15K 3.5" DP HDD 384854-B21
HP 72GB 3G SAS 15K 3.5" SP HDD 375870-B21
HP 72GB 3G SAS 15K 3.5" DP HDD 384852-B21
NOTE: The purchase of SAS HBA or array controller is required.  
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html (Worldwide)  
3.5" SATA Hot Plug Drives  
HP 750GB 1.5G SATA 7.2K 3.5" HDD 432341-B21
HP 500GB 1.5G SATA 7.2K 3.5" HDD 395473-B21
HP 250GB 1.5G SATA 7.2K 3.5" HDD 349239-B21
HP 160GB 1.5G SATA 7.2K 3.5" HDD 349238-B21
3.5" SATA Non-Hot Plug Drives  
HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD 411276-B21
HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD 411275-B21
NOTE: The previous generation of 1.5G SATA drives are still supported. These drives can be purchased as an option, however they are no longer configurable.
NOTE: SATA hard drives have a 1-year warranty. Please see the QuickSpecs for Technical Specification and additional information:
http://h18000.www1.hp.com/products/quickspecs/11940_div/11940_div.html (Worldwide)
 

Hot Plug HDD Backplane OptionHot Plug HDD Backplane 1U 2S Kit
NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only.
445985-B21

Graphic CardsHP NVIDIA Quadro FX3700 512MB PCI-e Kit
NOTE: Use Slot 2, PCI-E x16 Full Length Slot.
490062-B21
HP NVIDIA Quadro FX1700 512MB PCI-e Kit
NOTE: Use Slot 2, PCI-E x16 Full Length Slot.
490646-B21
NOTE: At this time, these graphic cards are supported on Linux and Windows.

Optical Drives DVD-ROM Drive
447889-B21
DVD/CD RW Drive
447891-B21

Storage Controllers NOTE: The addition of storage controllers for internal hard drive use is intended for use ONLY with the Hot Plug SATA/SAS Model Chassis (445148-B21).  
SAS HBA  
HP 8 Internal Port SAS HBA with RAID
NOTE: For use with Hot Plug SAS/SATA models.
NOTE: The selection HP 8 Internal Port SAS HBA with RAID requires the purchase of the LowProfile PCI-X Riser Option kit (P/N 452698-B21).
347786-B21
HP SC44Ge Host Bus Adapter
NOTE: PCI-Express SAS HBA.
416096-B21
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information:
http://h18004.www1.hp.com/products/quickspecs/12332_div/12332_div.html
(8 Internal Port SAS HBA)
http://h18004.www1.hp.com/products/quickspecs/12617_div/12617_div.html (SC44Ge HBA)
 
SCSI HBA  
HP SC11Xe Host Bus Adapter
412911-B21
NOTE: Please see the following QuickSpecs for Technical Specifications additional information:
http://h18000.www1.hp.com/products/quickspecs/12566_div/12566_div.html
(SC11Xe HBA)
 
SAS Controllers  
Smart Array E200 Controller  
HP Smart Array E200/128 BBWC Controller 411508-B21
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12460_div/12460_div.html
(Smart Array E200 Controller)
 
Smart Array E500 Controller  
HP Smart Array E500/256MB Controller
NOTE: Standard RAID 0,1, 1+0.
NOTE: Customers can only order one Smart Array E500/256MB Controller and one Battery-backed write cache upgrade (P/N 383280-B21) for the HP ProLiant DL165 G5 server based on battery space.
435129-B21
Battery-backed write cache upgrade
NOTE: Contains battery only. For Smart Array P400 Controller.
NOTE: RAID 5 support. When installing a battery-backed write cache module, the HP Smart Array E500 must be installed in the full-length PCI slot.
383280-B21
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/12700_div/12700_div.html
(Smart Array E500 Controller)
 
Smart Array P400 Controller  
HP Smart Array P400/256MB Controller
NOTE: Customers can only order one Smart Array P400/256MB Controller and one Battery-backed write cache upgrade (P/N 383280-B21) for the HP ProLiant DL165 G5 server based on battery space.

405132-B21

HP Smart Array P400/512MB BBWC Controller
NOTE: Customers can only order one Smart Array P400/512MB BBWC Controllers for the HP ProLiant DL165 G5 server based on battery space.
411064-B21
512MB Battery-backed write cache upgrade
NOTE: Contains battery and memory module. For Smart Array P400 Controller.
405148-B21
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/12400_div/12400_div.html
(Smart Array P400 Controller)
 
Smart Array P800 Controller  
HP Smart Array P800/512 BBWC Controller 381513-B21
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/12616_div/12616_div.html
(Smart Array P800 Controller)
 
Riser Board Kits  
HP HTX Riser Board Kit 445987-B21
HP PCI-X L/P Riser Kit
NOTE: Replaces the standard Half Height (LP) PCI Express slot with a Half Height (LowProfile) PCI-X slot.
452698-B21

Communications HP NC110T PCI Express Gigabit Server Adapter 434905-B21
HP NC360T PCI Express Dual Port Gigabit Server Adapter 412648-B21
HP NC364T PCI Express Quad Port Gigabit Server Adapter 435508-B21
HP NC373F PCI Express Multifunction Gigabit Server Adapter 394793-B21
HP NC373T PCI Express Multifunction Gigabit Server Adapter 394791-B21
HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter 458492-B21
HP NC510C PCIe 10 Gigabit Server Adapter
NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510C adapter.
414129-B21
HP NC510F PCIe 10 Gigabit Server Adapter
NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510F adapter.
414126-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs  

HPC Specific OptionsHP IB 4X DDR PCI-e Dual Port HCA448397-B21
HP IB 4X DDR PCI-e Dual Port 0 Memory HCA483513-B21
NOTE: For HPC interconnect adapters please see the HPC Interconnect section of this QuickSpecs. 

Tape Drives NOTE: For the complete listing of Tape Drive offerings, please see:
http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
USB Rack-Mount Tape Solutions
HP StorageWorks 1U USB Rack-Mount Kit with one DAT 160 USB Tape Drive
NOTE: Pre-configured with one DAT 160 USB tape drive.
AG703A
SAS Rack-Mount Tape Solutions
NOTE: HP recommends purchasing the HP SC44Ge HBA (416096-B21) for a dedicated SAS HBA for tape.
HP StorageWorks 1U SAS Rack-Mount Kit with one LTO-4 Ultrium 1760
NOTE: Pre-configured with one LTO-4 Ultrium 1760 SAS tape drive.
EH946A
HP StorageWorks 1U SAS Rack-Mount Kit
NOTE: Supports up to (2) half-height SAS tape drives.
AE459A

HP StorageWorks DAT 160 SAS Internal Tape Drive
NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A).

Q1587A

HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive
NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A).

DW085A

HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive
NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A).

EH847A
SCSI Rack-Mount Tape Solutions
NOTE: SCSI Controller required. HP recommends purchasing the HP SC11Xe HBA (412911-B21) for a dedicated SCSI HBA for tape.
HP StorageWorks 1U SCSI Rack-mount kit with one LTO-2 Ultrium 448 SCSI Tape Drive (Carbonite)
NOTE: Pre-configured with one LTO-2 Ultrium 448 SCSI tape drive.
DW028B
HP StorageWorks 1U SCSI Rack-mount kit with one LTO-3 Ultrium 920
NOTE: Pre-configured with one LTO-3 Ultrium 920 SCSI tape drive.
EH903A
HP StorageWorks 3U SCSI Rack-Mount with 1 LTO-4 Ultrium 1840 Tape Drive
NOTE: Pre-configured with one LTO-4 Ultrium 1840 SCSI tape drive.
EH926A
For an up-to-date listing of the latest O/S and software support details for HP Ultrium tape drives, please visit: http://www.hp.com/go/connect

Disk-Based Backup RDX Removable Disk Backup  
HP StorageWorks RDX160 External Removable Disk Backup System
NOTE: 160GB of Disk Storage
AJ766A
HP StorageWorks RDX320 External Removable Disk Backup System
NOTE: 320GB of Disk Storage
AJ768A
HP StorageWorks RDX500 External Removable Disk Backup System
NOTE: 500GB of Disk Storage
AJ935A
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13036_div/13036_div.html
 
D2D Backup  
HP StorageWorks D2D120 Backup System with Data Protector Express Software Kit
NOTE: 2TB of Disk Storage
EH924A

HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive
NOTE: 3TB of Disk Storage

EH952A
HP StorageWorks D2D2503i Backup System
NOTE: 3TB of Disk Storage.
EH945A
HP StorageWorks D2D4004i Backup System
NOTE: 4.5TB of Disk Storage
EH938A
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://www.hp.com/go/d2d.

Tape Autoloaders HP StorageWorks DAT Autoloader
HP StorageWorks DAT 72x10 tape autoloader
AE313B
HP StorageWorks 1/8 G2 Tape Autoloader
HP StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader
AK377A
HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Autoloader
AH558A
HP StorageWorks 1/8 G2 LTO-2 Ultrium 448 Tape Autoloader
AH164A
HP StorageWorks 1/8 G2 Tape Autoloader Rack Kit
NOTE: Required to install the 1/8 G2 Autoloaders in a standard 19-inch rack; includes rails and rackmount instructions
AH166A
NOTE: Please reference the QuickSpecs for Technical Specifications and http://www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at: http://www.hp.com/go/ebs

Tape Libraries HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 SCSI Drive Library
AJ033A
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1760 SAS Drive Library AK378A
HP StorageWorks MSL2