|
|
Overview
|
HP SATA Hard Drives |
|
HP SATA drives are designed for the reliability and larger capacities
demanded by today's entry server and external storage environments. The
SATA portfolio is categorized into two categories: Entry (ETY) and Midline
(MDL) drives. HP SATA Entry drives are the lowest unit-cost solution for
entry-level servers. HP SATA Midline drives are designed with economical
reliability and performance for external storage, backups and archival
applications. These high capacity drives provide the lowest $/GB to our
customers. Both Entry and Midline SATA drives provide the best price advantage
for non-mission critical applications with low workloads of 40% or less.
HP SATA drives are available in both Large Form Factor (LFF) (3.5-inch)
and Small Form Factor (SFF) (2.5-inch) and ship with a standard one year
warranty, 1,0,0. |
| ||||||
| What's New | |
|
|
|
|
| Models | |
| NOTE: SATA Drive Write Cache
is disabled by default to minimize the risk of data loss in case of power
loss. For information on how to enable Drive Write Cache on SATA drives
via supported controllers and HBAs and what precautions should be followed
please visit: www.hp.com/go/SATA NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. |
|
| HP 6G SATA Hard Drives for Gen8 Servers only |
|
| 6G SATA Hot Plug with SmartDrive SFF
(2.5-inch) Midline (MDL) Drives |
|
| HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC
Midline 1yr Warranty Hard Drive |
655710-B21 |
| HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch)
SC Midline 1yr Warranty Hard Drive |
655708-B21 |
| 6G SATA Hot Plug with SmartDrive LFF
(3.5-inch) Midline (MDL) Drives |
|
| HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) SC
Midline 1yr Warranty Hard Drive |
628061-B21 |
| HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) SC
Midline 1yr Warranty Hard Drive |
658079-B21 |
| HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive | 657750-B21 |
| HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive | 658071-B21 |
| 6G SATA Non-hot Plug LFF (3.5-inch) Midline
(MDL) Drives |
|
| HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot
plug Midline 1yr Warranty Hard Drive |
628065-B21 |
| HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot
plug Midline 1yr Warranty Hard Drive |
659339-B21 |
| HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot
plug Midline 1yr Warranty Hard Drive |
659337-B21 |
| HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive | 659341-B21 |
| 6G SATA Quick Release SFF (2.5-inch) Midline
(MDL) Drives |
|
| HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) Quick
Release Midline 1yr Warranty Hard Drive |
632080-B21 |
| HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch)
Quick Release Midline 1yr Warranty Hard Drive |
632078-B21 |
| 6G SATA Quick Release LFF (3.5-inch) Midline
(MDL) Drives |
|
| HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) Quick Release Midline 1yr Warranty Hard Drive | 647274-B21 |
| HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) Quick
Release Midline 1yr Warranty Hard Drive |
672621-B21 |
| HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch)
Quick Release Midline 1yr Warranty Hard Drive |
659349-B21 |
| HP SATA Hot Plug Hard Drives | |
| SATA Hot Plug LFF (3.5-inch) Entry (ETY)
Drives |
|
| HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Entry 1yr Warranty Hard Drive |
571230-B21 |
| SATA Hot Plug SFF (2.5-inch) Midline (MDL)
Drives |
|
| HP 1TB 3G SATA 7.2K rpm SFF (2.5-inch) Hot
Plug Midline 1yr Warranty Hard Drive |
625609-B21 |
| HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch)
Midline 1yr Warranty Hard Drive |
507750-B21 |
| SATA Hot Plug LFF (3.5-inch) Midline (MDL)
Drives |
|
| HP 3TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline
1yr Warranty Hard Drive |
628059-B21 |
| HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline
1yr Warranty Hard Drive |
507632-B21 |
| HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline
1yr Warranty Hard Drive |
454146-B21 |
| HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive | 458928-B21 |
|
HP SATA Non-Hot Plug Hard Drives |
|
|
SATA Non-Hot Plug SFF (2.5-inch) Entry (ETY) Drives |
|
|
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Non-hot plug Entry 1yr Warranty Hard Drive |
628033-B21 |
|
SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives |
|
|
HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive |
571232-B21 |
|
SATA Non-Hot Plug SFF (2.5-inch) Midline (MDL) Drives |
|
|
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive |
507753-B21 |
|
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives |
|
|
HP 3TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive |
628063-B21 |
|
HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive |
507774-B21 |
|
HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive |
507772-B21 |
|
HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive |
458941-B21 |
| HP SATA Quick Release Hard Drives NOTE: These drives are not supported by Gen8 servers. |
|
| SATA Quick Release SFF (2.5-inch) Midline
(MDL) Drives |
|
| HP 1TB 3G SATA 7.2K rpm SFF (2.5-inch) Quick-release
Midline 1yr Warranty Hard Drive |
627632-B21 |
| HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch)
Quick-release Midline 1yr Warranty Hard Drive |
574953-B21 |
| SATA Quick Release LFF (3.5-inch) Midline
(MDL) Drives |
|
| HP 3TB 3G SATA 7.2K rpm LFF (3.5-inch) Quick
Release Midline 1yr Warranty Hard Drive |
642098-B21 |
| HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Quick-release
Midline 1yr Warranty Hard Drive |
574755-B21 |
| HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Quick-release
Midline 1yr Warranty Hard Drive |
574025-B21 |
| HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Quick-release Midline 1yr Warranty Hard Drive | 574023-B21 |
|
NOTE: Please refer to the appropriate
server QuickSpecs for full compatibility details regarding the |
|
|
|
Standard Features
| Drive Quality | Today's entry-level servers and external storage solutions are seeing an increase in maximum storage capacity and demand for increased levels of drive quality. In the often-changing entry-level server and storage environment, storage has become a critical component of the information system, significantly defining both the systems reliability. This is why HP drives undergo an intense qualification process that eliminates firmware and O/S incompatibilities. All drives are proven to perform in the HP ProLiant and Modular Smart Array (MSA) storage systems for which they were designed. |
|
|
|
| Performance | Only those drives whose quality is suitable for an entry-level, external storage enclosures and server environments are selected through the HP qualification process. All our drives are proven to be reliable in the ProLiant server and MSA storage environment. |
|
|
|
| Integration | Many issues customers have with third party Serial-ATA drives are integration related issues. When buying from another supplier, there is no guarantee that a drive has been correctly set for proper operation with ProLiant entry-level servers or MSA enclosures. These incompatibilities can create problems in configuration, can rob your system of performance, or at their worst, can result in data corruption. HP hard drives are specifically designed and tested for flawless operation in your HP equipment. The integration of hard drives in HP systems means that cables, controllers, and firmware are right for your ProLiant entry level server or MSA enclosures. |
|
|
|
| Pre-Failure Alert | When used in conjunction with a SMART Array
Controller and Systems Insight Manager, the SMART capable firmware in HP
hard drives enables extensive fault prediction capabilities. If potential
problems develop in one of the drives, the Smart Array Controller, Systems
Insight Manager and/or SMART hard disk drive lets you know in advance so
you can have the drive replaced, before it fails, under warranty. NOTE: All drives are protected by a Pre-Failure Alert when used with a HP Smart Array controller and Systems Insight Manager, allowing hard drives to be replaced before failure under warranty. In addition, all drives are covered by a 1 or 3 year limited on-site warranty, regardless of the warranty period of the system in which they are installed. However, the drive warranty is automatically uplifted when used in a server or MSA for which a care pack is purchased. Please see the below HP Care Pack Information section for additional services. NOTE: SATA hard drives have a 1 year limited warranty regardless of the warranty period for the system in which they are installed. |
|
|
|
| Server and Storage Support | Please see the following URL for the latest list of supported servers and enclosures: http://www.hp.com/servers/hdd-documentation |
|
|
Service and Support
|
Service and Support |
HP Technology Services Protect your business beyond warranty with HP Care Pack Services HP Foundation Care services deliver scalable support-packages for HP industry-standard servers and software. You can choose the type and level of service that is most suitable for your business needs. New to this portfolio is HP Collaborative Support. If you are running business critical environments, HP offers Proactive Care or Critical Advantage. These services help you deliver high levels of application availability through proactive service management and advanced technical response. Here is the support service recommendation from the Foundation Care and Proactive Care portfolio. For customized support service solution, HP can work with you to tailor a service solution for your unique support requirements using broader services portfolio of Foundation Care and Proactive Care. |
|
|
|
| Recommended HP Care Pack Services for optimal satisfaction with your HP product | |
|
Recommended Services |
3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service OR 3-Year HP 24x7 4 hour Response, HP Collaborative Support |
| HP ProLiant Server Hardware Installation Provides for the basic hardware installation of HP branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf |
|
|
|
|
| Related HP Care Pack Services to enhance your HP product experience | |
|
Related Services |
3-Year HP 24x7 4 hour Response, Proactive Care or Critical Advantage
OR 3-Year HP 6-hour Onsite Call-to-Repair, HP Collaborative Support |
| HP Proactive Select Service Provides a flexible way to purchase HP best-in-class consultancy and technical services. You can buy Proactive Select Service Credits when you purchase your hardware and then use the credits over the next 12 months. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN.pdf |
|
|
|
|
|
Insight Remote Support |
Provides 24 X 7 remote monitoring, proactive notifications, and problem resolution. Learn more http://www.hp.com/go/insightremotesupport |
|
|
|
|
HP Support Center |
Personalized online support portal with access to information, tools and experts to support HP business products. Submit support cases online, chat with HP experts, access support resources or collaborate with peers. Learn more http://www.hp.com/go/hpsc HP's Support Center Mobile App* allows
you to resolve issues yourself or quickly connect to an agent for live
support. Now, you can get access to personalized IT support anywhere,
anytime. *HP' Support Center Mobile App is subject to local availability |
|
|
|
|
Parts and materials |
HP will provide HP-supported replacement parts and materials necessary to maintain the covered hardware product in operating condition, including parts and materials for available and recommended engineering improvements. Supplies and consumable parts will not be provided as part of this service; standard warranty terms and conditions apply. Parts and components that have exceeded their maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating manual or the technical product data sheet will not be provided, repaired or replaced as part of this service. |
|
|
|
|
Warranty / Service Coverage |
For ProLiant servers and storage systems, this service covers HP-branded hardware options qualified for the server, purchased at the same time or afterward, internal to the enclosure, as well as external monitors up to 22" and tower UPS products; these items will be covered at the same service level and for the same coverage period as the server unless the maximum supported lifetime and/or the maximum usage limitation has been exceeded. Coverage of the UPS battery is not included; standard warranty terms and conditions apply. The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have exceeded maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating manual or the technical data sheet are not eligible for the defective media retention service feature option. |
|
|
|
|
For more information |
To learn more on services for HP ESSN Options, please contact your HP sales representative or HP Authorized Channel Partner. Or visit: http://www.hp.com/services/proliant or www.hp.com/services/bladesystem |
|
|
Technical Specifications
| 6G SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives (Gen8 only) | ||||
| HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive | 655708-B21 | Capacity | 500,107MB | |
| Height | 0.62 in (15.6 mm ) | |||
| Width | 2.98 in (75.7 mm) | |||
| Depth | 4.67 in (118.7 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
6Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | .7ms | ||
| Average | <8.5ms | |||
| Full-Stroke | 16.96ms | |||
| Rotational Speed | 7200 | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 976,773,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive | 655710-B21 | Capacity | 1,000,204MB | |
| Height | 0.62 in (15.6 mm) | |||
| Width | 2.98 in (75.7 mm) | |||
| Depth | 4.67 in (118.7 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
6Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | .7 ms | ||
| Average | <8.5 ms | |||
| Full-Stroke | 16.96 ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 1,953,525,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| 6G SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives (Gen8 only) | ||||
| HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive | 658071-B21 | Capacity | 500,107MB | |
| Height | 1.06 in (26.8 mm) | |||
| Width | 4.16 in (105.8 mm) | |||
| Depth | 6.69 in (170.0 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
6Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | .5ms | ||
| Average | <8.5ms | |||
| Full-Stroke | 16.3ms | |||
| Rotational Speed | 7200 | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 976,773,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive | 657750-B21 | Capacity | 1,000,204MB | |
| Height | 1.06 in (26.8 mm) | |||
| Width | 4.16 in (105.8 mm) | |||
| Depth | 6.69 in (170.0 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
6Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | .5 ms | ||
| Average | <8.5 ms | |||
| Full-Stroke | 16.5 ms |
|||
| Rotational Speed | 7,200 rpm |
|||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 1,953,525,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive | 658079-B21 | Capacity | 2,000,398MB | |
| Height | 1.06 in (26.8 mm) | |||
| Width | 4.16 in (105.8 mm) | |||
| Depth | 6.69 in (170.0 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
6Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | .5 ms | ||
| Average | <8.5ms | |||
| Full-Stroke | 16.0 ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 3,907,029,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| HP 3TB 6G SATA 7.2K rpm LFF
(3.5-inch) SC Midline 1yr Warranty Hard Drive |
628061-B21 | Capacity | 3,000,592,982,016 | |
| Height | 1.06 in (26.8 mm) | |||
| Width | 4.16 in (105.8 mm) | |||
| Depth | 6.69 in (170.0 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
6Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | .5 ms | ||
| Average | 8.2 ms | |||
| Full-Stroke | 16.0 ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 5,860,533,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
NOTE: To support HP hard drives exceeding 2.2 TB, HP Smart Array
Firmware version 5.0 or later is required for the following controllers:
To use hard drives exceeding 2.2 TB, you must create a boot volume using
offline ACU version 8.75 or later. HP Smart Array controllers do not support
boot volumes exceeding 2.2 TB. |
||||
|
|
||||
| SATA Hot Plug LFF (3.5-inch)
Entry (ETY) Drives NOTE: These drives are not supported by Gen8 servers. |
||||
| HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Entry 1yr Warranty Hard Drive | 571230-B21 | Capacity | 250,059MB | |
| Height | 1.04 in (26.4 mm) | |||
| Width | 4.36 in (110.7 mm) | |||
| Depth | 7.25 in (184.2 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 2.0 ms | ||
| Average | 11 ms | |||
| Full-Stroke | 21.0 ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 488,397,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| SATA Hot Plug SFF (2.5-inch)
Midline (MDL) Drives NOTE: These drives are not supported by Gen8 servers. |
||||
| HP 1TB 3G SATA 7.2K rpm SFF
(2.5-inch) Hot plug Midline 1yr Warranty Hard Drive |
625609-B21 | Capacity | 1,000,204MB | |
| Height | 0.63 in (16.0 mm) | |||
| Width | 3.00 in (72.2 mm) | |||
| Depth | 5.38 in (136.6 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | .7ms | ||
| Average | <8.5ms | |||
| Full-Stroke | 16.96ms | |||
| Rotational Speed | 7200 | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 1,953,525,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive | 507750-B21 | Capacity | 500,107MB | |
| Height | 0.63 in (16.0 mm) | |||
| Width | 3.00 in (72.2 mm) | |||
| Depth | 5.38 in (136.6 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | .5 ms | ||
| Average | 8.2 ms | |||
| Full-Stroke | 17.55 ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 976,773,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| SATA Hot Plug LFF (3.5-inch)
Midline (MDL) Drives NOTE: These drives are not supported by Gen8 servers. |
||||
| HP 3TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive | 628059-B21 | Capacity | 3,000,592,982,016 | |
| Height | 1.04 in (26.4 mm) | |||
| Width | 4.36 in (110.7 mm) | |||
| Depth | 7.25 in (184.2 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 0.5 ms | ||
| Average | <8.1 ms | |||
| Full-Stroke | 15.5 ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 5,860,533,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
NOTE: To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware version 5.0 or later is required for the following controllers:
To use hard drives exceeding 2.2 TB, you must create a boot volume using
offline ACU version 8.75 or later. HP Smart Array controllers do not support
boot volumes exceeding 2.2 TB. |
||||
|
|
||||
| HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive | 507632-B21 | Capacity | 2,000,398MB | |
| Height | 1.04 in (26.4 mm) | |||
| Width | 4.36 in (110.7 mm) | |||
| Depth | 7.25 in (184.2 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 0.5 ms | ||
| Average | <8.5 ms | |||
| Full-Stroke | 16.9 ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 3,907,029,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive | 454146-B21 | Capacity | 1,000,204MB | |
| Height | 1.04 in (26.4 mm) | |||
| Width | 4.36 in (110.7 mm) | |||
| Depth | 7.25 in (184.2 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 2.0 ms | ||
| Average | <8.5 ms | |||
| Full-Stroke | 25.0 ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 1,953,525,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive | 458928-B21 | Capacity | 500,107MB | |
| Height | 1.04 in (26.4 mm) | |||
| Width | 4.36 in (110.7 mm) | |||
| Depth | 7.25 in (184.2 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 2.0 ms | ||
| Average | <8.5 ms | |||
| Full-Stroke | 21.0 ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 976,773,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| SATA Non-Hot Plug SFF (2.5-inch) Entry (ETY)
Drives NOTE: These drives are not supported by Gen8 servers. |
||||
| HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Non-hot Plug Entry 1y Warranty Hard Drive | 628033-B21 | Capacity | 500,107MB | |
| Height | 0.37 in (9.5 mm) | |||
| Width | 2.75 in (69.85 mm) | |||
| Depth | 3.94 in (100.0 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 1 ms | ||
| Average | 11 ms | |||
| Full-Stroke | 19ms | |||
| Rotational Speed | 7200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 976,773,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| SATA Non-Hot Plug LFF (3.5-inch)
Entry (ETY) Drives NOTE: These drives are not supported by Gen8 servers. |
||||
| HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive | 571232-B21 | Capacity | 250,059MB | |
| Height | 1.028 in (26.1 mm) | |||
| Width | 4.00 in (101.6 mm) | |||
| Depth | 5.75 in (146.0 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 2.0 ms | ||
| Average | 11 ms | |||
| Full-Stroke | 21.0 ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 488,397,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| SATA Non-Hot Plug SFF (2.5-inch)
Midline (MDL) Drives NOTE: These drives are not supported by Gen8 servers. |
||||
| HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive | 507753-B21 | Capacity | 500,107MB | |
| Height | 0.591 in (15.0 mm) | |||
| Width | 2.750 in (69.85 mm) | |||
| Depth | 3.937 in (100.0 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | .5 ms | ||
| Average | 8.2 ms | |||
| Full-Stroke | 17.55 ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 976,773,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| SATA Non-Hot Plug LFF (3.5-inch)
Midline (MDL) Drives NOTE: These drives are not supported by Gen8 servers. |
||||
| HP 3TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-Hot Plug Midline 1yr Warranty Hard Drive | 628063-B21 | Capacity | 3,000,592,982,016 | |
| Height | 1.028 in (26.1 mm) | |||
| Width |
4.00 in (101.6 mm) |
|||
| Depth | 5.75 in (146.0 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 0.5 ms | ||
| Average | <8.1 ms | |||
| Full-Stroke | 15.5 ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 5,860,533,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
NOTE: To support HP hard drives exceeding 2.2 TB on pre Gen8 servers, HP Smart Array Firmware version 5.0 or later is required for the following controllers:
To use hard drives exceeding 2.2 TB, you must create a boot volume using
offline ACU version 8.75 or later. HP Smart Array controllers do not support
boot volumes exceeding 2.2 TB. |
||||
|
|
||||
| HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive | 507774-B21 | Capacity | 2,000,398MB | |
| Height | 1.028 in (26.1 mm) | |||
| Width | 4.00 in (101.6 mm) | |||
| Depth | 5.75 in (146.0 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 0.5 ms | ||
| Average | <8.5 ms | |||
| Full-Stroke | 16.9 ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 3,907,029,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive | 507772-B21 | Capacity | 1,000,204MB | |
| Height | 1.028 in (26.1 mm) | |||
| Width | 4.00 in (101.6 mm) | |||
| Depth | 5.75 in (146.0 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 2.0 ms | ||
| Average | <8.5 ms | |||
| Full-Stroke | 25.0 ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 1,953,525,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive | 458941-B21 | Capacity | 500,107MB | |
| Height | 1.028 in (26.1 mm) | |||
| Width | 4.00 in (101.6 mm) | |||
| Depth | 5.75 in (146.0 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 2.0 ms | ||
| Average | <8.5 ms | |||
| Full-Stroke | 21.0 ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 976,773,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| SATA Quick Release SFF (2.5-inch)
Midline (MDL) Drives NOTE: These drives are not supported by Gen8 servers. |
||||
| HP 1TB 3G SATA 7.2K rpm SFF (2.5-inch) Quick-release Midline 1yr Warranty Hard Drive | 627632-B21 | Capacity | 1,000,204MB | |
| Height | 0.74 in (18.8 mm) | |||
| Width | 2.91 in (73.9 mm) | |||
| Depth | 3.95 in (100.2 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 0.7ms | ||
| Average | <8.5ms | |||
| Full-Stroke | 16.96ms | |||
| Rotational Speed | 7200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 1,953,525,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Quick-release Midline 1y Warranty Hard Drive | 574953-B21 | Capacity | 500,107MB | |
| Height | 0.74 in (18.8 mm) | |||
| Width | 2.91 in (73.9 mm) | |||
| Depth | 3.95 in (100.2 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 0.7ms | ||
| Average | <8.5ms | |||
| Full-Stroke | 16.96ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 976,773,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| SATA Quick Release LFF (3.5-inch)
Midline (MDL) Drives NOTE: These drives are not supported by Gen8 servers. |
||||
| HP 3TB 3G SATA 7.2K rpm LFF (3.5-inch) Quick Release Midline 1yr Warranty Hard Drive | 642098-B21 | Capacity | 3,000,592MB | |
| Height | 1.16 in (29.6 mm) | |||
| Width | 4.16 in (105.6 mm) | |||
| Depth | 5.79 in (147.0 mm) |
|||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 0.5ms | ||
| Average | 8.2ms | |||
| Full-Stroke | 16ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 5,860,533,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Quick-release Midline 1yr Warranty Hard Drive | 574755-B21 | Capacity | 2,000,398MB | |
| Height | 1.16 in (29.6 mm) | |||
| Width | 4.16 in (105.6 mm) | |||
| Depth | 5.79 in (147.0 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 0.5ms | ||
| Average | <8.5ms | |||
| Full-Stroke | 16ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 3,907,029,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Quick-release Midline 1yr Warranty Hard Drive |
574025-B21 | Capacity | 1,000,204MB | |
| Height | 1.16 in (29.6 mm) | |||
| Width | 4.16 in (105.6 mm) | |||
| Depth | 5.79 in (147.0 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 0.5ms | ||
| Average | <8.5ms | |||
| Full-Stroke | 16.5ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 1,953,525,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
| HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Quick-release Midline 1yr Warranty Hard Drive | 574023-B21 | Capacity | 500,107MB | |
| Height | 1.16 in (29.6 mm) | |||
| Width | 4.16 in (105.6 mm) | |||
| Depth | 5.79 in (147.0 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate (Maximum) |
3Gb/s | |||
| Native Command Queuing | Supported | |||
| Seek Time
(typical reads, including settling) |
Single Track | 0.5ms | ||
| Average | <8.5ms | |||
| Full-Stroke | 16.3ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 976,773,168 | |||
| Operating Temperature (system inlet air temperature) |
50° to 95° F (10° to 35° C) | |||
|
|
||||
|
Environment-friendly Products and Approach |
End-of-life Management and Recycling |
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment. |
|
|
||
|
© Copyright 2012 Hewlett-Packard Development Company,
L.P. |