• Support for NC375T PCI Express Quad Port Gigabit Server Adapter

The HP ProLiant DL180 G6 is a low cost high capacity storage optimized 2-way server that delivers on a history of design excellence and 2U density for a variety of rack deployments and applications.

• Processors:
  • Supports up to two Quad-Core Intel® Xeon® processors: 5500 sequence with 8MB Level 3 cache
  • Intel® 5520 Chipset
• Memory:
• Up to 12 DIMM slots
• Up to 192GB, using 16GB Quad-Rank PC3-8500R-7 DDR3 Registered (RDIMM) memory, operating at 800MHz when fully populated at 2 DIMMs per Channel in 12 slots
• Up to 96GB, using PC3-10600R DDR3Registered (RDIMM) memory, operating at 1066MHz when fully populated at 2 DIMMs per Channel in 12 slots.
  • Up to 24GB, using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when fully populated at 2 DIMMs per Channel in 12 slots
    NOTE: Half DIMM slots are available when one processor is installed.
• Internal Drive Support:
• Support for up to twenty-five (25) SFF with a Smart Array controller.
• Support for up to fourteen (14) LFF with a Smart Array controller:
  • Hot Plug Serial ATA (SATA) Models: Up to 14.0TB (14 x 1TB Hot Plug 3.5" hard drives)
  • Hot Plug Serial Attached SCSI (SAS) Models: SAS Model: Up to 14.0TB (14 x 1TB Hot Plug 3.5" hard drives)
    NOTE: Four (4), eight (8) and twelve (12) hard drives models are supported standard via BTO. Eight (8) and twelve (12) hard drive model support requires the addition of a Smart Array or HBA controller. Hot Plug and SAS functionality require the addition of a Smart Array or HBA controller.
• Network Controller:
• HP NC362i Integrated Dual Port Gigabit Server Adapter
• HP NC375T PCI Express Quad Port Gigabit Server Adapter
• Storage Controllers:
• 4 HDD BTO Models: HP Embedded SATA RAID Controller RAID 0,1,10
  NOTE: Embedded SATA controller support transfer rate up to 1.5Gb/s SATA
  NOTE: To enable RAID on Embedded SATA, use the HP Smart Array B110i SATA Raid controller, To enable use of the B110i, enter the ROM based setup utility(RBSU). The option for enabling RAID can be found in the Advanced section of the RBSU
• 8 HDD BTO Models: HP Smart Array P410 /256MB Controller (RAID 0/1/1+0/5/5+0
• 12 HDD BTO Models: HP Smart Array P212 /256MB Controller(RAID 0/1/1+0/5/5+0)
  NOTE: A minimum of 256 MB cache, battery kit, and Smart Array Advanced Pack License Key upgrade is required to enable RAID 6, 6+0
• Internal Drive Support:
• Standard model drive bays:
  • Four (4) 3.5"Large Form Factor (LFF) hot-plug drive bays supporting up to 6Gb/s SAS or 3Gb/s SATA transfer rate. NOTE: Embedded SATA controller support transfer rate up to 1.5Gb/s SATA. HP Smart Array P212 or P410 controller is required to achieve 6Gb/s SAS or 3Gb/s SATA transfer rate
  • Eight (8) 3.5" Large Form Factor (LFF) hot-plug drive bays supporting up to 6Gb/s SAS or 3Gb/s SATA transfer rate.
  • Twelve (12) 3.5" Large Form Factor (LFF) hot-plug drive bays supporting up to 3Gb/s SAS or 3Gb/s SATA transfer rate.
• Optional drive bays:
  • Twenty Five (25) 2.5" Small Form Factor (SFF) hot-plug drive bays supporting up to 6Gb/s SAS or 3Gb/s SATA transfer rate.
  • Eight (8) 2.5" Small Form Factor (SFF) hot-plug drive bays supporting up to 6Gb/s SAS or 3Gb/s SATA transfer rate.
  • Rear Two (2) 3.5" Large Form Factor (LFF) hot-plug drive bays to use with 12LFF bays supporting up to 3Gb/s SAS or 3Gb/s SATA transfer rate. NOTE: Full Height/ Full Length Riser Option is not available when the Rear 2LFF drive bays is selected for the system.
    NOTE: All Hard drive bay options except 4LFF require HP Smart Array P410 or P212 controller. NOTE: To achieve highest possible stated transfer rate please make sure the firmware on the drive bays (backplanes) and HP Smart Array controller up to date. Latest firmware are available to download from HP support web site.
• Hard disk drives support:
  • Up to 14.0TB (14 x 1TB Hot Plug Serial-attached SCSI (SAS) or Serial ATA (SATA) drives 3.5" hard drives)
  • Up to 12.5 TB (25 x 500GB Hot Plug Serial-attached SCSI (SAS) or Serial ATA (SATA) drives 2.5" hard drives)
• Expansion Slots:
• Up to Four (4) available PCI-Express Slots via the Three (3) PCI-E Slot Riser
• One available Low Profile x16 PCI-Express slot using a Low profile Riser
• Two Full Height/ Full Length Riser options:
  • Option1: 2 PCIe2x8 full-length/full-height PCI-Express slots (Standard)
  • Option2: 2 PCI-X, full-length/full-height riser Slots(Optional)
  • Option 3: 1 PCIe2x16 full-length / full-height slot (Optional)
  • Option 4: 2 PCIe2x8 and 1 PCIex8(4) full-length/full-height slots (Optional)
    NOTE: Full Height/ Full Length Riser Option are not available when the Rear 2LFF drive bay is selected for the system.
• Redundancy:
• Fully redundant non-hot plug fans (Optional)
• Hot plug power supply with optional redundancy
• Power Sources:
• Dual Common Slot Bay for Right Sized, Hot plug and Redundant Power
  • HP 750W CS HE Gold Power Supply (Standard on some models)
  • HP 460W CS HE Gold Power Supply (Standard on some models)
• Infrastructure Management:
  • With G6, ProLiant 100-series server administrators are able to deploy and monitor their servers using methods similar to 300 series servers and above. Agents and the Easy Set-up CD are available that provide a user experiences consistent with 300 series and above.
    • With Easy Set-up CD, customers get SmartStart "like" deployment tools that reduce the time required for server setup and updates. Easy Set-up CDs and their ISO images are provided with each ProLiant G6 100-series server and are used to perform assisted installations for one or two servers. Users performing multi-server installations involving large numbers of servers may require the following deployment tools:
      • SmartStart Scripting Toolkit - Automated scalable deployment utility
      • Smart Components - a self-executable software consisting of driver and firmware
    • With agents and providers, ProLiant 100 series servers get environmental monitoring that is similar and consistent to that of ProLiant 300 series servers and above. This server now offers the HP Insight Management Agents and HP Insight Management WBEM Providers, two well established sets of management and Internet standards technologies that provide capabilities which provide integration to HP Systems Insight Manager (SIM).
  • HP Insight Control for Linux, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a single, simple management console. Insight Control for Linux supports Linux-based central management servers.
• Ports:
• Five USB ports (two front, two rear , one optional internal)
  NOTE: In order to utilize the internal USB port the USB cable (P/N: 536769-B21) must be connected to the internal USB header
• Optical Drive:
• Support for one (optional): DVD-ROM, DVD/CD RW
  NOTE: In the12LFF or 25SFF drives bay model Optical drives are required to be installed with rear option kit (P/N 515826-B21)
• Form Factor:
• 2U rack models
• Operating Systems and Virtualization Software:
• Supports Windows, RHEL, SLES, Solaris, VMware, and Citrix Essentials for XenServer (Retail)
• Deployment/Serviceability:
• HP ProLiant DL180 G6 models have fixed rails which provide support for racks with round mounting holes and tool-free support for racks with square mounting holes (including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 26" - 36"
• Tool-less access to all system components for easy in rack serviceability
• Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
• Warranty:
• This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and parts replacement is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
  NOTE: Server Warranty includes 3-Years Next Business Day Parts replacement, 0-Years Labor, 0-Years Onsite support. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

32MB* shared supporting all display resolutions up to 1600x1200 16bpp@75Hz
NOTE: 8MB is dedicated to video memory.

HP ProLiant Onboard Administrator Powered by Lights-Out 100i, simplifies server setup, control, and lights-out remote administration of ProLiant 100 Series servers and functions without additional software. It can be accessed from any location via LAN or Internet and works hand-in-hand with HP Systems Insight Manager (SIM), helping customers unlock the value of the ProLiant platform and deliver the highest possible quality of IT service to the business. Advanced Licenses are required for Virtual KVM and Virtual Media feature activation.

Key features of LO100i are:

• IPMI 2.0 & SMASH CLP support
• ROM Setup Utility
• Improvements to virtual media with the addition of USB 2.0 drives and protocol support for much faster transfer speeds and DVD-ROM support plus simplified virtual media (floppy and CD with no FTTP server requirements)
• Enhanced browser interface and embedded KVM over IP provides OS-independent remote graphical console
• 24x7 Technical Support and Update (TSU) 1 year support and license upgrades included in Advanced license

NOTE: For more information, see: http://www.hp.com/go/lo100

HP Insight Control for Linux, as a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, monitor, remote control, and optimize your IT infrastructure through a single, simple management console. The Insight Control for Linux suite installs and license software modules that are integrated into HP System Insight Manager.

The HP Insight Control suite for Linux (IC-Linux) serves environments requiring a Linux-based management consoles. See www.hp.com/go/ic-linux

HP Insight Control suites include one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/insight

HP provides management solutions that are designed to simplify a server's installation, configuration, and maintenance throughout the entire server lifecycle. This provides the customers with higher levels of operational efficiency and highly reliable systems.

While ProLiant 100 series G6 servers do not support the Insight Foundation Suite for ProLiant, they support a key subset of this important suite software tools and utilities which are very suitable for this class of server: SIM, SMH, agents, providers, and a SmartStart 'like' deployment CD called Easy Set-up which greatly simplifies server set-up. Additionally the DL100 and SL100 G6 models support the SmartStart Scripting Toolkit (SSSTK), an automated scalable deployment utility.

Information on core management supported on ProLiant 100 series G6 servers can be found at these URLS:

• Core Management: www.hp.com/go/coremanagement

HP ProLiant 100 series Easy Set-up CDs: www.hp.com/servers/easysetup

• HP Insight Management Agents and Insight Management Providers are available for HP Systems Insight Manager (SIM) Integration.
  
  ProLiant 100-series G6 servers can use the same SNMP based Insight Management Agents supported by other ProLiant servers. As a result, administrators can use HP Systems Insight Manager (SIM) 5.3 and greater to manage ProLiant 100-series G6 servers. Administrators can also use any other SNMP- based management tool. These agents are obtained as part of the ProLiant 100-series model-specific "Easy Set-up" CDs, or through: www.hp.com/servers/easysetup
  
  The following capabilities are enabled on the 100-series G6 servers by the SNMP agents:
• Health monitoring capabilities, including monitoring for drives, fans, network, power supplies, and temperature
• Alerting capabilities, including basic alert notification for Smart Array drive pre-failure only
• Performance monitoring capabilities providing information on processor, memory, disk free space, network utilization

NOTE: For additional information, please see: http://www.hp.com/go/insight

Easy Set-up CDs are available on all 100-series G6 servers and are also available as an ISO image web download. HP ProLiant Easy Set-up CDs provide easy, step-by-step, single and multi-server server utilities for the ProLiant 100-series G6 servers to streamline server setup for 100-series G6 servers. The user experience is consistent with SmartStart and offers the following capabilities:

• Boot environment and GUI
• Assisted Installation: Windows 2003 Server and Windows 2008 Server drivers
• Manual installation: Windows 2003 Server, Windows 2008 Server, and Linux drivers (specific OS support varies by server. Refer to each server's QuickSpecs for supported versions)
• HP Insight Diagnostics
• AutoRun
• Array Configuration Utility (ACU) has been combined with Array Diagnostics Utility (ADU) to offer both configuration of array controllers and storage devices and testing of array controller hardware
• SmartStart Scripting Toolkit (SSSTK) and Smart Components for software and drivers for DL100 and SL100 servers

NOTE: OS and SW available for Manual Installation are listed on each servers' QuickSpecs.

The latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options; downloaded from Software and Drivers download pages website at: http://www.hp.com/go/support and from www.hp.com/servers/easysetup. Contains the following:

• HP Insight Management Agents for Systems Insight Manager (SIM) Integration
• HP Systems Management Homepage
• Array Configuration Utility (ACU)
• Array Diagnostics Utility (ADU)
• HP Insight Diagnostics

It is highly recommended that you use the HP Power Advisor in defining the "Right-Size" power supply for your needs. HP offers Power Supply Options:

• 460Watts, Common Slot,92% Efficiency
• 750Watts, Common Slot, 92% Efficiency

HP's ProLiant Common Slot Power supplies (460W & 750W) meet multiple Energy Efficiency Initiatives. Climate Savers Computing Initiative GOLD, ECOS Consulting 80PLUS GOLD and plans on offering models that meet the Energy Star for Server requirements when they are published.

HP's ProLiant Common Slot Power supplies (1200W) meet multiple Energy Efficiency Initiatives. Climate Savers Computing Initiative Bronze, ECOS Consulting 80PLUS Bronze Power Supply requirements.

Redundant Power: Optional (1+ 1 or n+n redundant) power supplies can be purchased through power supply option kits.

Microsoft Windows Server
Microsoft Windows Server Hyper-V
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Enterprise Linux (OEL)
Solaris 10 for x86/x64 based Systems
VMware ESX Server
Citrix Essentials for XenServer (Retail)

Rack 10000 G2 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm).

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

HP ProLiant DL180 rack models have fixed rails which provide support for racks with round mounting holes and tool-free support for racks with square mounting holes (including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 26" - 36".

Support for all 2 and 4 post Telco racks and threaded hole racks requires an additional option kit from Rack Solutions. The Rack Solutions brackets can be purchased at: www.hp.com/go/rackandpower.

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.

HP services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server, purchased at the same time or afterward, internal to the enclosure, as well as 22" and smaller external monitors and tower UPS options up to 3kVA; these items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included, standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service - Simplify ProLiant solution implementation, maintenance and management.

• Support Service - 3-Year 24x7 4 hr Response service support coverage
• Deployment Service - Hardware Installation

Enhanced Service - Optimize service level to increase IT performance and availability

• Support Service - 3-Year 24x7 24 hr Call to repair service support coverage
• Support- - 3-Year 24x7 6 hr Call to repair service support coverage
• Support Plus - 24x7 4 hr Response service support including OS coverage

Installation of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

For a complete listing of service offerings and information visit: http://www.hp.com/services/proliantservices
http://h20219.www2.hp.com/services/us/en/warranty/carepack-servers-proliant.html

Four Drive Serial ATA (SATA) Models
NOTE: Upgrading from 4 Non-Hot Plug SATA hard drives to 4 Hot Plug SATA/SAS hard drives requires the addition of a storage controller and one Internal mini-SAS cable (P/N 496013-B21).
NOTE: Upgrading to 8 Hot Plug SATA/SAS hard drives requires the addition of a HP 2U G6 8HDD LFF DL18X KIT (P/N 506924-B21), storage controller (Smart Array P410/256MB recommended), and two Internal SATA/SAS cables (mini-SAS cable (P/N 496013-B21).

HP DL180G6 E5504 2x2GB 4LFF
487502-xx1

HP DL180G6 L5520 2x2GB 4LFF
487506-xx1

Eight Drive Serial ATA (SATA) Models
NOTE: Supports up to 8 Hot Plug SATA or SAS Hard Drives.

HP DL180G6 E5520 3x2GB 8LFF
487503-xx1

Twelve Drive Serial ATA (SATA) Models
NOTE: Internal Storage expandable to 14 SAS/SATA drives with 2 Rear Drive Option Kit (P/N 488234-B21)

HP DL180G6 E5540 6x2GB 12LFF US
487507-xx1

HP DL180G6 E5520 3x2GB 12LFF
487508-xx1

Optical Drives

HP Graphic Card Power Adapter Kit

Security

9-Hour x 5-Day Coverage, 3 Years, Electronic

DIMM slot and configuration diagrams
Basic memory slot & population diagram

• Population order; start with "A" first, "B" second, "C" third, etc.

Standard memory configuration (1 CPU model)

• 6GB, consisting of three (3) 2GB dual-rank PC3-10600 RDIMMs

Standard memory plus optional memory (1 CPU model)

• 30GB, consisting of three (3) 2GB RDIMMs plus three (3) 8GB RDIMMs
  • 3x 2GB dual-rank PC3-10600 RDIMMs
  • 3x 8GB dual-rank PC3-8500 RDIMMs

Standard memory replaced with optional memory (1 CPU model)
RDIMM maximum configuration

• 96GB, consisting of six (6) 16GB quad-rank PC3-8500 RDIMMs

UDIMM maximum configuration (1 CPU model)

• 12GB, consisting of six (6) 2GB dual-rank PC3-10600 UDIMMs

Standard memory replaced with optional memory (2 CPU model)
RDIMM maximum configuration

• 192GB, consisting of twelve (12) 16GB quad-rank PC3-8500 RDIMMs

UDIMM maximum configuration (2 CPU model)

• 24GB, consisting of twelve (12) 2GB dual-rank PC3-10600 UDIMMs

External Storage

Optional Country Power Cords and Jumper Cords

To review typical system power ratings use the Power Advisor which is available via the online tool located at URL: www.hp.com/go/proliant-energy-efficient

• Click on the system of interest. Example: DL180 G6
• Follow the instructions of the next screens.

HP 160GB 3G SATA 7.2K 3.5" ETY HDD
458945-B21

Smart Array P212 Controller

Smart Array P410/410i Controller

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.