|
|
Overview
|
HP ProLiant DL165 Generation 6 (G6) | |||
|
Hot Plug SAS/SATA or Non-Hot Plug SATA Models
| |||
![]() | ![]() | ||
| Front View: | Rear View: | ||
| 1. | Access panel | 1. | Power supply cable socket |
| 2. | Memory banks | 2. | PS/2 mouse port |
| 3. | Two (2) AMD Opteron 2400 series processors | 3. | PS/2 keyboard port |
| 4. | Power supply | 4. | Two (2) RJ45 GbE LAN ports |
| 5. | Low-profile PCI-Express or PCI-X slot | 5. | Rear panel USB 2.0 ports |
| 6. |
System fans
| 6. | Lights-Out 100 10/100Mbps port |
| 7. | Optical drive bay | 7. | Video port |
| 8. | Front-panel USB 2.0 ports | 8. | Serial port |
| 9. | Power switch/system status LEDs | 9. | Low-profile riser board assembly slot cover |
| 10. | Optional 3rd and 4th 3.5" hot-plug SAS/SATA or non-hot plug SATA hard drive bays | 10. | Full-sized riser board assembly slot cover |
| 11. | Standard 1st and 2nd 3.5" hot-plug SAS/SATA or non-hot plug SATA hard drive bays | ||
| 12. | Full height/full length PCI-Express or HTX slot | ||
| What's New |
|
|
|
| At A Glance |
|
Introducing the HP ProLiant DL165G6, now available with the latest high performance Opteron Six-Core processors and a new high efficiency power supply.
|
|
|
Standard Features
|
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. |
|
|
Processor |
AMD Opteron™ processor Model 2435 (2.6 GHz, 75W ACP) |
| AMD Opteron™ processor
Model 2431 (2.4 GHz, 75W ACP) NOTE: Offered through Configure-To-Order only. See Factory Integrated Models section for more details. |
|
| AMD Opteron™ processor Model 2427 (2.2 GHz, 75W ACP) | |
| AMD Opteron™ processor Model 2425HE (2.1 GHz, 55W ACP) | |
| AMD Opteron™ processor Model 2423HE (2.0 GHz, 55W ACP) | |
|
|
|
| Upgradeability | Upgradeable to two processors |
|
| |
| Chipset | ServerWorks HT2100 and HT1000 |
| | |
| Cache Memory | Model Series 24xx |
| 6MB shared L3 | |
|
|
|
| Memory Protection | Advanced ECC |
|
| |
| Memory One of the following depending on Model |
Type | REG PC2-6400 DIMMs (DDR2-800) | |
| REG PC2-5300 DIMMs (DDR2-667) | |||
| Standard | 4 GB | (2 x 2 GB) | |
| Maximum | 64 GB | (8 x 8 GB) | |
|
|
|||
| Network Controller | Embedded NC7782 dual-port gigabit server adapter |
|
| |
|
Expansion Slots #
|
Technology
|
Bus Width**
|
Connector Width
|
Bus Number*
|
Form Factor
|
Notes
|
|
1
|
PCI Express
|
x16
|
x16
|
3
|
Full Height/Full Length
|
|
| 1 | HTX | N/A | N/A | 9 | Full Height/Full Length | |
| 2 | PCI Express | x4 | x8 | 6 | Low-profile | |
| 2 | PCI-X | 64-bit, 133MHz | N/A | 2 | Low-profile | |
| * Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number. | ||||||
| ** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus). | ||||||
| NOTE: Slot 2 is reserved for a storage controller with the Hot Plug Model chassis. | ||||||
|
|
||||||
| Storage Controller | Non-Hot Plug SATA | HP Embedded SATA Controller NOTE: Raid support requires optional slot based raid controller. |
| Hot Plug SATA/SAS | HP Smart Array P212 RAID Controller NOTE: Transfer rate: up to 3 Gb/s SATA, up to 3 Gb/s SAS. |
|
| NOTE:
A diskette drive or virtual FDD using LO100 Advanced Pack is needed to install
storage controller drivers during a Windows operating system installation
from a CD. NOTE: RAID 6 functionality requires the addition of Smart Array Advanced Pack (P/N: 516471-B21). |
||
|
| ||
| Storage | Diskette Drives | Via USB only |
| Optical Drives | Optional 8x IDE (ATAPI) DVD-ROM drive, slim | |
| Optional 24x IDE (ATAPI) DVD-ROM/CDRW drive | ||
| Hard Drives | Up to 4 Non-hot plug SATA 3.5" drives | |
| Up to 4 Hot plug SATA /SAS 3.5" drives | ||
|
|
||
| Maximum Internal Storage | Non-Hot Plug SATA | 3.0TB | 4 x 750GB |
| Hot Plug SATA | 4.0TB | 4 x 1TB | |
| Hot Plug SAS | 4.0TB | 4 x 1TB | |
| | |||
| Interfaces | Parallel | None |
| Network RJ-45(Ethernet) | Embedded NC7782 dual-port gigabit server adapter | |
| Serial | 1 | |
| Pointing Device (Mouse) | 1 | |
| Graphics | 1 | |
| Keyboard |
1 |
|
| USB | Up to 5 (two front & two rear standard, 1 internal option). | |
|
|
||
| Graphics | 32MB shared supporting 1600x1200x16M resolution |
|
| |
| Form Factor | Rack (1U), (1.75 in/4.45 cm) |
| | |
| Embedded Manageability | HP ProLiant Onboard Administrator and LO100i Advanced |
HP ProLiant Onboard Administrator Powered by Lights-Out 100 with Optional
LO100i Advanced Licenses for Virtual KVM and Virtual Media.
Licensed Features:
NOTE: Flexible and volume quantity (AKA) license kits are available for the Lights-Out 100i Advanced Pack licenses as well as Electronic License To Use (E-LTU). AKA Tracking licenses require a 100 unit minimum forecast at initial contract signing. For these additional part numbers, please refer to each software products. QuickSpecs at this link for more information: www.hp.com/go/lo100 |
|
|
||
| HP Insight Control management software | HP Insight Control for Linux |
HP Insight Control for Linux, as a product option, delivers essential
infrastructure management that can help save time and money by making
it easy to deploy, monitor, remote control, and optimize your IT infrastructure
through a single, simple management console. The Insight Control for Linux
suite installs and license software modules that are integrated into HP
System Insight Manager. |
|
|
||
| Industry Standard Compliance | ACPI V2.0 Compliant |
| PCI 2.2 Compliant | |
| PXE Support | |
| WOL Support | |
| Microsoft® Logo certifications | |
| IPMI 2.0 Compliant | |
|
|
|
| Security | Power-on password |
| Setup password | |
| SSH and SSL Encryption | |
|
|
|
| UPS and PDU Power Cord Matrix |
Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units. Please see the following link: www.hp.com/products/powercords. |
| | |
| Power Supply | 500 Watts, auto-switching, high efficiency, PFC (Power Factor Correcting). |
|
|
|
| System Fans | 6 system fans ship standard; non-hot plug, non-redundant |
| | |
| Operating Systems and Virtualization Software Support for ProLiant Servers |
Microsoft
Windows Server |
| NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/supportos and our driver download page http://www.hp.com/support/DL165G6. | |
|
|
|
| Rack Airflow Requirements | Rack 10000 G2 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors. CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment: Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation). Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 7 cm (2.75 inches) CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage. |
| | |
| Rack Support | The DL Fixed Rail System supports installation in racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24" - 36". |
| | |
| Telco Rack Support | Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit. For additional information, please visit: www.hp.com/go/rackandpower |
| | |
| HP Factory Express Capability |
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed. |
|
|
|
| HP Enterprise Configurator |
The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance. |
|
|
|
| Service and Support |
HP Care Pack Services provide total care and support expertise with committed
response designed to meet your IT and business needs.
Enhanced Service - Optimize service level to increase IT performance and availability
Installation & Start-Up of a ProLiant server and Microsoft or Linux
O/S per the Customer Description and/or Data Sheet. To be delivered on
a scheduled basis 8am-5pm, M-F, excl. HP holidays. |
|
|
HPC Interconnects
| NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL165 G6 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to configure HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects: http://www.hp.com/techservers/clusters/ucp/index.html | ||
|
|
||
| HPC Interconnects | InfiniBand | PCI-X and PCI-Express adapters |
| Gigabit Ethernet | Use embedded ports or optional 10GbE NICs | |
| Myrinet XP | PCI-X Rev D, Rev E and Rev F adapters | |
|
|
Models
| Hot Plug Serial ATA (SATA)/Serial Attached SCSI (SAS) Models | ||
|
HP DL165G6 2427 2.2 GHz, 4GB, Hot Plug (1P) |
Processor(s) |
(1) AMD Opteron™ processor Model 2427 (2.2 GHz, 75W ACP) |
| Cache Memory | 6MB shared Level 3 cache | |
| Memory One of the following depending on model |
4 GB (2 x 2GB) Registered PC2-6400
DDR2 DIMMs (800MHz) with Advanced ECC capabilities 8GB (4 x 2GB) Registered PC2-6400 DDR2 DIMMs (800MHz) with Advanced ECC capabilities |
|
| Network Controller | Embedded NC7782 dual-port gigabit server adapter | |
| Storage Controller | HP Smart Array P212 (538278-xx1) HP Smart Array P212/256MB/BBWC (538274-xx1) |
|
| Hard Drive | None Ship Standard (up to 4 Hot Plug SATA or SAS drives supported) | |
| Internal Storage One of the following depending on model |
SATA: 4.0TB Maximum SAS: 4.0TB Maximum |
|
| Optical Drive | None Ship Standard (1 DVD-ROM or DVD/CD RW supported) | |
| Form Factor | Rack (1U) | |
|
|
||
| Non-Hot Plug Serial ATA (SATA) Models | ||
|
HP DL165 G6 2423HE NHP SATA, 4GB, 1P |
Processor(s) |
(1) AMD Opteron™ processor Model 2423HE (2.0 GHz, 55W ACP) |
| Cache Memory | 6MB shared Level 3 cache | |
| Memory | 4 GB (2 x 2GB) Registered PC2-6400 DDR2 DIMMs (800MHz) with Advanced ECC capabilities | |
| Network Controller | Embedded NC7782 dual-port gigabit server adapter | |
| Storage Controller | HP Embedded SATA Controller | |
| Hard Drive | (1) 160GB NHP SATA HDD | |
| Internal Storage | SATA: 3TB maximum | |
| Optical Drive | None Ship Standard (1 DVD-ROM or DVD/CD RW supported) | |
| Form Factor | 1U | |
|
|
Smart Buys
|
HP S-Buy DL165 G6 2427 SATA NHP 581772-001 |
Processor(s) |
(1) AMD Opteron™ Processor Model 2427 (2.2 GHz, 75W ACP) |
| Memory | 2GB (2 x 1 GB) PC2-6400 | |
| Network Controller | Embedded NC7782 Dual-Port Gigabit Server Adapter | |
| Storage Controller | Embedded SATA controller | |
| Hard Drive | (1) 250GB 3G SATA 7.2K NHP 3.5" MDL HDD | |
| Optical Drive | DVD-ROM Drive | |
| Form Factor | Rack (1U), (1.75 in/ 4.45 cm) | |
|
|
||
|
HP S-Buy DL165 G6 2431 2P RPS Svr 581773-001
|
Processor(s) |
(2) AMD Opteron™ Processor Model 2431 (2.4 GHz, 75W ACP) |
| Memory | 4GB (2 x 2GB) PC2-6400 | |
| Network Controller | Embedded NC7782 Dual-Port Gigabit Server Adapter | |
| Storage Controller | HP P212/256 BBWC Smart Array | |
| Hard Drive | None included, up to 4 LFF hot plug drives | |
| Optical Drive | DVD/CD RW Drive | |
| Form Factor | Rack (1U), (1.75 in/ 4.45 cm) |
|
|
Configuration Information - Factory Integrated Models
|
NOTE: This section lists some of the steps required to configure
a Factory Integrated Model. To ensure only valid configurations are ordered,
HP recommends the use of an HP approved configurator. Contact your local
sales representative for information on CTO product offerings and requirements. |
||
| Step 1: Base Configuration | ||
| Non-Hot Plug SATA Model | ||
| HP ProLiant DL165 G6 Non-Hot Plug SATA Rack Chassis |
572227-B21
|
|
| Factory Integrated Model ships with: | ||
| Embedded NC7782 dual-port gigabit server adapter | ||
|
Two available PCI-Express slots, including one full-length/full height and one low-profile/half height slot |
||
| HP embedded SATA controller | ||
| One Highline IEC Power Cord | ||
| 6 Fixed, Non-Redundant Fans | ||
| Rack (1U), (1.75 in / 4.45 cm) Tool-less Fixed Rails |
||
| Hot Plug SATA/SAS Model | ||
| HP ProLiant DL165 G6 Hot Plug SATA/SAS Rack Chassis |
572228-B21
|
|
| Factory Integrated Model ships with: | ||
| Embedded NC7782 dual-port gigabit server adapter | ||
| One full-length/full height PCI-Express
slot. Low-profile/half height slot houses the HP Smart Array P212 storage controller |
||
| One Highline IEC Power Cord | ||
| 6 Fixed, Non-Redundant Fans | ||
| Rack (1U), (1.75 in / 4.45 cm) Tool-less Fixed Rails |
||
|
|
||
| Step 2: Choose Required Options (only one of the following from each list unless otherwise noted) | ||
| Processors | AMD Opteron™ processor Model
2435 (2.6 GHz, 75W ACP), Option Kit, FIO NOTE: If 2 processors are desired, select one 572221-L21 and one 572221-B21. |
572221-L21 |
| AMD Opteron™ processor Model
2431 (2.4 GHz, 75W ACP), Option Kit, FIO NOTE: If 2 processors are desired, select one 572219-L21 and one 572219-B21. |
572219-L21 | |
| AMD Opteron™ processor Model
2427 (2.2 GHz, 75W ACP), Option Kit, FIO NOTE: If 2 processors are desired, select one 5721421-L21 and one 572142-B21. |
572142-L21 | |
| AMD Opteron™ processor Model
2425HE (2.1GHz, 55W ACP), Option Kit, FIO NOTE: If 2 processors are desired, select one 572140-L21 and one 572140-B21. |
572140-L21 | |
| AMD Opteron™ processor Model
2423HE (2.0GHz, 55W ACP), Option Kit, FIO NOTE: If 2 processors are desired, select one 572138-L21 and one 572138-B21. |
572138-L21 | |
|
|
||
| Memory | 2 GB REG PC2-6400 2 x 1 GB Kit |
497763-B21
|
| 4 GB REG PC2-6400 2 x 2 GB Kit | 497765-B21 | |
| 8 GB REG PC2-6400 2 x 4 GB Kit |
497767-B21
|
|
| 8 GB REG PC2-6400 2 x 4 GB Low Power Kit |
504351-B21
|
|
| 16 GB REG PC2-5300 2 x 8 GB Kit | 408855-B21 | |
| 64 GB REG PC2-5300 8 x 8 GB Kit | 495605-B21 | |
|
|
||
| Hard Drive | NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, and the server
backplane) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components. NOTE: Required only if P/N 572227-B21 selected in Step 1. NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. |
|
| Serial-ATA (SATA) Non-Hot Plug Hard Drives (Non-Hot Plug Models Only) | ||
| SATA Non-Hot Plug Entry (ETY) Drives | ||
| HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD |
458947-B21
|
|
| SATA Non-Hot Plug Midline (MDL) Drives | ||
| HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD | 462595-B21 | |
| HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD | 458941-B21 | |
| HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD |
458939-B21
|
|
|
|
||
| Storage Controllers | NOTE: A minimum
of one Smart Array Controller is required when purchasing Hot Plug CTO Chassis
Model (P/N 572228-B21). NOTE: In order to upgrade to RAID 6, at least 256MB Cache and a Battery is required in addition to the Smart Array Advanced Pack license (516471-B21). |
|
| HP P212/256MB FIO Smart Array BBWC |
491191-B21
|
|
| HP P212/256MB Smart Array Controller |
462834-B21
|
|
| HP P212/Zero Memory Smart Array Controller | 462828-B21 | |
| HP P410/Zero Memory FIO Smart Array Controller | 462860-B21 | |
| HP P410/256MB Smart Array Controller | 462862-B21 | |
| HP Smart Array P410/256MB w/ Battery FIO | 491195-B21 | |
| HP P410/512MB BBWC Smart Array Controller | 462864-B21 | |
|
|
||
| Power Supply | Many HP ProLiant Servers now offer new power options, including Common Slot Power Supplies. These power supplies come in multiple power ratings and higher efficiency levels to offer the Right Size solution to fit your configuration. This provides improved power delivery and the advantage of reclaiming lost power. Prior to making a power supply selection it is "highly recommended" that the "HP Power Advisor" is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor | |
| HP High Efficiency 750W CS Power Supply/Backplane/Bracket FIO Kit | 535683-B21 | |
| HP High Efficiency 500W CS Multi-output Power Supply FIO Kit | 536928-B21 | |
|
|
||
| Step 3: Choose Additional Options for Factory Integration |
| NOTE: For additional "Core Options" and "Additional Options", please refer to the "Options" sections below. |
|
|
Core Options
| NOTE: Some options may not be available for factory integration. Please contact an HP sales representative for additional information. | ||
| Processor | AMD Opteron™ processor Model 2435 (2.6 GHz,75W ACP) | 572221-B21 |
| AMD Opteron™ processor Model 2431 (2.4 GHz, 75W ACP) | 572219-B21 | |
| AMD Opteron™ processor Model 2427 (2.2 GHz,75W ACP) | 572142-B21 | |
| AMD Opteron™ processor Model 2425HE (2.1GHz, 55W ACP) | 572140-B21 | |
| AMD Opteron™ processor Model 2423HE (2.0GHz, 55W ACP) | 572138-B21 | |
|
|
||
|
Memory (DIMMs) |
2 GB REG PC2-6400 2 x 1 GB Kit | 497763-B21 |
| 4 GB REG PC2-6400 2 x 2 GB Kit | 497765-B21 | |
| 8 GB REG PC2-6400 2 x 4 GB Kit | 497767-B21 | |
| 8 GB REG PC2-6400 2 x 4 GB Low Power Kit | 504351-B21 | |
| 16 GB REG PC2-5300 2 x 8 GB Kit | 408855-B21 | |
| 64 GB REG PC2-5300 8 x 8 GB Kit | 495605-B21 | |
|
|
||
| Optical Drives | DVD-ROM Drive |
447889-B21
|
| DVD/CD RW Drive |
447891-B21
|
|
|
|
||
| Hard Drives | NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, and the server
backplane) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. |
|
| SATA Hot Plug 3.5" Midline (MDL) Drives | ||
| HP 1TB 3G SATA 7.2K 3.5" MDL HDD | 454146-B21 | |
| HP 750GB 3G SATA 7.2K 3.5" MDL HDD | 458930-B21 | |
| HP 500GB 3G SATA 7.2K 3.5" MDL HDD | 458928-B21 | |
| HP 250GB 3G SATA 7.2K 3.5" MDL HDD | 458926-B21 | |
| SATA Non-Hot Plug 3.5"Midline (MDL) Drives | ||
| HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD | 462595-B21 | |
| HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD | 458941-B21 | |
| HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD | 458939-B21 | |
| SATA Hot Plug 3.5" Entry (ETY) Drives | ||
| HP 160GB 3G SATA 7.2K 3.5" ETY HDD | 458945-B21 | |
| SATA Non-Hot Plug Entry (ETY) Drives | ||
| HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD | 458947-B21 | |
| NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13021_na/13021_na.html | ||
| SATA Hot Plug 3.5" Midline (MDL) Solid State Drives | ||
| HP 120GB 3G SATA 3.5in MDL 1y Wty SSD | 570763-B21 | |
| HP 60GB 3G SATA 3.5in MDL 1y Wty SSD | 570761-B21 | |
| NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13415_na/13415_na.html | ||
| SAS Hot Plug 3.5" Enterprise (ENT) Drives | ||
| HP 600GB 6G SAS 15K 3.5" DP ENT HDD | 516828-B21 | |
| HP 450GB 6G SAS 15K 3.5" DP ENT HDD | 516816-B21 | |
| HP 450GB 3G SAS 15K 3.5" DP ENT HDD | 454232-B21 | |
| HP 300GB 6G SAS 15K 3.5" DP ENT HDD | 516814-B21 | |
| HP 300GB 3G SAS 15K 3.5" DP ENT HDD | 416127-B21 | |
| HP 146GB 3G SAS 15K 3.5" DP ENT HDD | 384854-B21 | |
| SAS Hot Plug 3.5" Midline (MDL) Drives | ||
| HP 1TB 3G SAS 7.2K 3.5" DP MDL HDD | 461137-B21 | |
| HP 750GB 3G SAS 7.2K 3.5" DP MDL HDD | 461135-B21 | |
| NOTE: The purchase of SAS HBA or array controller is required. | ||
| NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html | ||
|
|
||
| Communications | HP NC112T PCIe Gigabit Server Adapter | 503746-B21 |
| HP NC360T PCI Express Dual Port Gigabit Server Adapter | 412648-B21 | |
| HP NC375T PCI Express Quad Port Gigabit Server Adapter | 538696-B21 | |
| HP NC364T PCI Express Quad Port Gigabit Server Adapter | 435508-B21 | |
| HP NC373F PCI Express Multifunction Gigabit Server Adapter | 394793-B21 | |
| HP NC373T PCI Express Multifunction Gigabit Server Adapter | 394791-B21 | |
| HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter | 458492-B21 | |
| HP NC522SFP Dual Port 10GbE Server
Adapter NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter. NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. |
468332-B21 | |
| NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs | ||
|
|
||
| Riser Cage Options | HP HTX Riser Board Kit | 445987-B21 |
| HP PCI-X L/P Riser Kit NOTE: Replaces the standard Half Height (LP) PCI Express slot with a Half Height (LowProfile) PCI-X slot. |
452698-B21 |
|
|
Additional Options
|
Remote Management |
HP LO100i Advanced Pack, No Media
1-Server License including 1 year of 24x7 Technical Support and Updates NOTE: For additional License Kits please see the Lights-Out 100i QuickSpecs at: www.hp.com/go/lo100. |
530521-B21
|
| NOTE: Flexible and volume quantity (AKA) license kits are available for the Lights-Out 100i Advanced Pack licenses as well as Electronic License To Use (E-LTU). AKA Tracking licenses require a 100 unit minimum forecast at initial contract signing. For these additional part numbers, please refer to QuickSpecs at this link for more information: www.hp.com/go/lo100. | ||
|
|
||
|
HP Insight Software |
HP Insight Control for Linux | |
| HP Insight Control for Linux, 1-server license, including one year of 24x7 Technical Support and Updates, Electronic |
T9084BAE
|
|
| HP Insight Control for Linux, No Media, 1-Server license, including one year of 24x7 Technical Support and Updates | 464423-B22 | |
| HP Insight Control for Linux,
Media pack (DVD) - No licenses included NOTE: Media pack DVD contains HP Insight Control for Linux, HP Systems Insight Manager, HP Insight Control power management, HP Insight Control virtual machine management, and an integrated installer. Licenses must be acquired separately. |
464422-B22 | |
| NOTE: Licenses
ship without media. The Media Kit for Insight Control for Linux can be ordered
separately, or can be downloaded at: http://www.hp.com/go/ic-linux
(click on Download button). NOTE: Electronic licenses can be used to purchase multiple licenses with a single activation key, and are available in all countries except China and Japan. Customers in China and Japan should order the physical equivalent. NOTE: Customer will receive a license entitlement certificate, which must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service. NOTE: For additional License Kits, including electronic licensing options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html |
||
| HP Insight Control server deployment | ||
| HP Insight Control server deployment Electronic License including 1 year 24x7 Technical Support and Updates | T9082AAE | |
| HP Insight Control server deployment 1-Server License including 1 year 24x7 Technical Support and Updates | 452151-B21 | |
| NOTE: Licenses
ship without media. The Insight Control Media Kit can be ordered separately,
or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses with a single activation key, and is available in all countries except China and Japan. Customers in China and Japan should order the physical equivalent. NOTE: Customer will receive a license entitlement certificate, which must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service. NOTE: For additional license kits please see the Insight Control QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12631_na/12631_na.html |
||
|
|
||
| Graphic Cards | HP NVIDIA Quadro FX3700 512MB
PCI-e Kit NOTE: Use Slot 2, PCI-E x16 Full Length Slot. |
490062-B21
|
| HP Graphic Card Power Adapter Kit | 533955-B21 | |
|
|
||
| Hot Plug HDD Backplane Option | Hot Plug HDD Backplane 1U 2S Kit
NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only. |
445985-B21
|
|
| ||
| Storage Controllers | NOTE: The addition of storage controllers for internal hard drive use is intended for use ONLY with the Hot Plug SATA/SAS Model Chassis (572228-B21). | |
| SAS Controllers | ||
| Smart Array P800 Controller | ||
| HP Smart Array P800/512 BBWC Controller | 381513-B21 | |
| Smart Array P212 Controller | ||
| HP Smart Array P212/Zero Memory Controller | 462828-B21 | |
| HP Smart Array P212/256MB Controller | 462834-B21 | |
| Smart Array P410 Controller | ||
| HP Smart Array P410/256MB Controller | 462862-B21 | |
| HP Smart Array P410/512MB with BBWC Controller | 462864-B21 | |
| Smart Array P411 Controller NOTE: Controllers for use with external storage only. |
||
| HP Smart Array P411/256MB Controller | 462830-B21 | |
| HP Smart Array P411/512MB BBWC | 462832-B21 | |
| NOTE: Please see
the following QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/12616_na/12616_na.html (Smart Array P800 Controller) http://h18000.www1.hp.com/products/quickspecs/13203_na/13203_na.html (Smart Array P212 Controller) http://h18000.www1.hp.com/products/quickspecs/13201_na/13201_na.html (Smart Array P410 Controller) http://h18000.www1.hp.com/products/quickspecs/13202_na/13202_na.html (Smart Array P411 Controller) |
||
| Optional upgrades | ||
| HP 8484 to Mini SAS 33in Cable
Assy NOTE: Needed to support internal drives on the DL165 G6 with the Smart Array P800 Controller. |
591734-B21 | |
| HP Smart Array Advanced Pack No Media 1-Server license including 1yr 24x7 Technical Support | 516471-B21 | |
| NOTE: This part number can be used to purchase a single license or to order multiple licenses with a single activation key. Customers will receive a license entitlement certificate via e-mail. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Include one year of 24x7 HP Software Technical Support Services. | ||
| SAS HBA | ||
| HP SC08Ge Host Bus Adapter | 488765-B21 | |
| NOTE: Please see
the QuickSpecs for Technical Specifications and additional information: http://h18004.www1.hp.com/products/quickspecs/13082_na/13082_na.html (SC08Ge HBA) |
||
|
|
||
| HPC Specific Options | HP IB 4X DDR PCI-e Dual Port HCA | 448397-B21 |
| HP IB 4X DDR PCI-e Dual Port 0 Memory HCA | 483513-B21 | |
| HP 10 GbE PCI-e G2 Dual Port Adapter | 516937-B21 | |
| NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/13078_na/13078_na.html | ||
|
|
||
| Tape Storage | NOTE: For the
complete listing of Tape Drive offerings, please see: http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html |
|
| Tape Drives | ||
| USB Rack-Mount Tape Solutions | ||
| DAT 320 USB External Tape Drive | AJ823A | |
| HP StorageWorks 1U USB Rack-Mount
Kit with one DAT 160 USB Tape Drive NOTE: Pre-configured with one DAT 160 USB tape drive. |
AG703A
|
|
| SAS Rack-Mount Tape Solutions NOTE: HP recommends purchasing the HP Smart Array P212 (462828-B21) for a dedicated SAS HBA for tape. |
||
| HP StorageWorks 1U SAS Rack-Mount
Kit with one LTO-4 Ultrium 1760 NOTE: Pre-configured with one LTO-4 Ultrium 1760 SAS tape drive. |
EH946A | |
| HP StorageWorks 1U SAS Rack-Mount
Kit NOTE: Supports up to (2) half-height SAS tape drives. |
AE459A | |
|
HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive |
DW085A
|
|
|
HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive |
EH847A
|
|
| DAT 320 WW SAS External Tape Drive | AJ828A | |
| Tape Autoloaders | ||
| HP StorageWorks 1/8 G2 Tape Autoloader | ||
| HP StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader | AK377A | |
| HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Autoloader | AH558A | |
| HP StorageWorks 1/8 G2 Tape Autoloader
Rack Kit NOTE: Required to install the 1/8 G2 Autoloaders in a standard 19-inch rack; includes rails and rackmount instructions. |
||
| NOTE: Please reference the Tape Autoloader QuickSpecs at: http://www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at: http://www.hp.com/go/ebs. | ||
| Tape Libraries | ||
| HP StorageWorks MSL2024 Tape Library | ||
| HP StorageWorks MSL2024 1 LTO-4 Ultrium 1760 SAS Drive Library | AK378A | |
| HP StorageWorks MSL2024 1 LTO-3 Ultrium 920 SAS Drive Library | AH559A | |
| HP StorageWorks MSL4048 Tape Library | ||
| HP StorageWorks MSL4048 2 LTO-4 Ultrium 1760 SAS Drive Library | AK380A | |
| HP StorageWorks MSL4048 1 LTO-3 Ultrium 920 SAS Drive Library | AH560A | |
|
|
||
| Disk-Based Backup | RDX Removable Disk Backup | |
| HP StorageWorks RDX320 External
Removable Disk Backup System NOTE: 320GB of Disk Storage. |
AJ768A | |
| NOTE: Please see
the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13036_na/13036_na.html |
||
| D2D Backup | ||
| HP StorageWorks D2D130 Backup
System with LTO-3 Ultrium 920 SAS Tape Drive NOTE: 3 TB raw capacity/2.25 TB useable capacity. |
EH952A
|
|
|
HP StorageWorks D2D2502i Backup System |
EJ001A
|
|
| HP StorageWorks D2D2504i Backup
System NOTE: 2 TB raw capacity/1.5 TB useable capacity. |
EJ002A | |
| NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://www.hp.com/go/d2d. | ||
|
|
||
| StorageWorks Options | StorageWorks Fibre Channel HBA | |
| NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed compatibility information please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.html | ||
| Brocade Fibre Channel HBAs
|
||
| HP 81B PCIe 8Gb FC Single Port
HBA |
AP769A | |
| HP 82B PCIe 8Gb FC Dual Port HBA
|
AP770A | |
| HP 41B PCIe 4Gb FC Single Port
HBA |
AP767A | |
| HP 42B PCIe 4Gb FC Dual Port HBA |
AP768A | |
| Emulex Fibre Channel HBAs |
||
| HP StorageWorks 81E 8Gb SP PCI-e
FC HBA |
AJ762A | |
| HP StorageWorks 82E 8Gb Dual-port
PCI-e FC HBA AJ763A |
||
| HP StorageWorks FC2143 4Gb PCI-X
2.0 -FC HBA AD167A |
||
| HP StorageWorks FC2243 Dual Channel 4Gb PCI-X 2.0 FC HBA AD168A | ||
| HP StorageWorks FC2142SR 4Gb PCI-e HBA |
A8002A
|
|
| HP StorageWorks FC2242SR Dual Channel 4Gb PCI-e HBA |
A8003A
|
|
| QLogic Fibre Channel HBAs | ||
| HP StorageWorks FC1142SR 4Gb PCI-e HBA |
AE311A
|
|
| HP StorageWorks FC1242SR Dual Channel 4Gb PCI-e HBA |
AE312A
|
|
| HP StorageWorks FC2143 4Gb PCI-X 2.0 -FC HBA |
AD167A
|
|
| HP StorageWorks FC2243 Dual Channel 4Gb PCI-X 2.0 FC HBA | AD168A | |
| HP StorageWorks 81E 8Gb SP PCI-e FC HBA | AJ762A | |
| HP StorageWorks 82E 8Gb Dual-port PCI-e FC HBA | AJ763A | |
| HP StorageWorks 82Q 8Gb Dual Port PCI-e FC HBA | AJ764A | |
| HP StorageWorks 81Q 8Gb PCI-e FC HBA | AK344A | |
| StorageWorks SCSI HBA | ||
| HP U320e SCSI Host Bus Adapter
NOTE: Recommended for MSL SCSI Tape Library connect. |
AH627A
|
|
| NOTE: Recommended Dual Channel Ultra320 SCSI Controller for connecting multi-drive MSL tape libraries to ProLiant servers. | ||
|
|
||
| HP StorageWorks Modular Smart Array |
MSA SAN Storage Arrays |
|
|
HP StorageWorks 50 Modular Smart Array |
364430-B21
|
|
| HP StorageWorks MSA60 Array NOTE: Please see the QuickSpecs for additional options and configuration information at: http://h18000.www1.hp.com/products/quickspecs/12627_na/12627_na.html |
418408-B21 | |
| HP StorageWorks MSA70 Array NOTE: Please see the QuickSpecs for additional options and configuration information at: http://h18000.www1.hp.com/products/quickspecs/12652_na/12652_na.html |
418800-B21 | |
|
|
||
| Uninterruptible Power Systems | HP Rack-mountable UPS | |
| HP R1500 G2 UPS | ||
| HP, R1.5kVA UPS, 1U |
AF419A
|
|
| NOTE: Please see
QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12507_na/12507_na.html NOTE: For additional information on sizing your server, please reference: http://www.upssizer.com |
||
|
|
||
| HP Rack Series (Carbon/Graphite Metallic) |
HP Rack 10000 G2 Series (Carbon/Graphite Metallic) | |
| 10642 G2 (42U) Rack Cabinet 1200mm Deep - Shock Pallet | AF034A | |
| 10642 G2 (42U) Rack Cabinet 1200mm Deep - Pallet |
AF038A
|
|
| 10647 G2 (47U) Rack Cabinet 1200mm Deep - Shock Pallet |
AF044A
|
|
| 10647 G2 (47U) Rack Cabinet 1200mm Deep - Pallet |
AF045A
|
|
| NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches. Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm. | ||
| NOTE: It is mandatory
to use a shock pallet when shipping racks with equipment installed. NOTE: xxxxxx-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels). |
||
| NOTE: Please see
the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12402_na/12402_na.html |
||
| NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.hp.com/go/rackandpower. | ||
|
|
||
| HP Rack Options | Keyboards and Monitors | |
| TAA TFT7600 Rackmount Keyboard and Monitor US | AG067A | |
| HP KVM Switch Options | ||
| HP 1x4 Console Switch | AF611A | |
| HP PS2 Server Console Cable, 6 foot, 2-Pack |
AF612A
|
|
| HP USB Server Console Cable, 6
foot, 2-Pack NOTE: Required for supporting USB peripheral. |
AF613A
|
|
| 0x2x16 KVM Server Console G2 Switch with Virtual Media and CAC | AF618A | |
| 0x2x32 KVM Server Console G2 Switch with Virtual Media and CAC | AF619A | |
| 1x1Ex8 KVM IP Console Switch G2 with Virtual Media and CAC | AF620A | |
| 2x1Ex16 KVM IP Console Switch G2 with Virtual Media and CAC | AF621A | |
| 4x1Ex32 KVM IP Console Switch G2 with Virtual Media and CAC | AF622A | |
| NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm. | ||
|
|
||
| USB Options | HP USB Internal Cable Kit |
451363-B21
|
| 1.44MB External USB Floppy Drive |
DC141B
|
|
| USB Floppy Drive | DC361B | |
| USB P/S2 Optical Mouse | DC369A | |
| USB Standard Keyboard All | DT528A | |
|
|
||
| Service and Support
Offerings (HP Care Pack Services) |
Hardware Services 4-Hour On-site Service | |
| 13-Hour x 5-Day Coverage, 3 Years, Electronic |
U9509E
|
|
| 24-Hour x 7-Day Coverage, 3 Years, Electronic |
U9510E
|
|
| Hardware Services Next Business Day On-Site Service | ||
| 9-Hour x 5-Day Coverage, 3 Years, Electronic |
U9508E
|
|
| Hardware Services 6-Hour Call to Repair On-Site Service | ||
| 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic | U9511E | |
| Hardware Installation, Electronic |
U9520E
|
|
| NOTE: For more information, customer/resellers can contact: http://www.hp.com/services/carepack |
|
|
Memory
| NOTE: Memory configurations listed do not apply to "Factory Integrated Models". |
| HP ProLiant DL165 G6 (all models) |
| Standard Memory 4 GB (2 x 2 GB) PC2-6400 DIMM memory, with Advanced ECC Capabilities memory installed. Maximum Memory Up to 64GB memory is available with the optional installation of PC2-5300 Registered DIMM memory kits. Memory should be installed in pairs and matched for optimum performance. |
| NOTE:
Chart does not represent all possible memory configurations. NOTE: Each processor support 4 DIMM sockets. Both processors sockets must be populated in order to use all 8 DIMM sockets. |
| Memory |
Slot
|
|||||||
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
| Standard (4 GB) |
2 GB
|
2 GB
|
Empty
|
Empty
|
Empty
|
Empty
|
Empty
|
Empty
|
| Maximum (64 GB) |
8 GB
|
8 GB
|
8 GB
|
8 GB
|
8 GB
|
8 GB
|
8 GB
|
8 GB
|
|
Following are memory options available from HP: |
|
|
2 GB REG PC2-6400 2 x 1 GB Kit |
497763-B21
|
| 4 GB REG PC2-6400 2 x 2 GB Kit |
497765-B21
|
|
8 GB REG PC2-6400 2 x 4 GB Kit |
497767-B21
|
| 8 GB REG PC2-6400 2 x 4 GB Low Power Kit |
504351-B21
|
| 16 GB REG PC2-5300 2 x 8 GB Kit | 408855-B21 |
| 64 GB REG PC2-5300 8 x 8 GB Kit | 495605-B21 |
|
|
Storage
|
|
1-4 | Non-hot plug 3.5" SATA or Hot-plug SAS/SATA hard drive bays |
| A | Optional DVD-ROM, or DVD/CD RW |
|
Drive Support |
|||
|
|
|||
| Removable Media | |||
|
Quantity |
Position |
Controller |
|
|
DVD-ROM |
Up to 1 |
A |
Integrated IDE (ATAPI) (optional) |
| DVD/CD RW |
Up to 1 |
A |
Integrated IDE (ATAPI) (optional) |
|
|
|||
|
Hard Drives |
|||
| SATA Non-Hot Plug Entry (ETY) Drives | |||
|
Quantity |
Position |
Controller |
|
| 160GB 3G SATA 7.2K |
Up to 4
|
1-4
|
HP Embedded SATA Controller |
| SATA Non-Hot Plug Midline (MDL) Drives | |||
|
Quantity |
Position |
Controller |
|
| 750GB 3G SATA 7.2K 500GB 3G SATA 7.2K 250GB 3G SATA 7.2K |
Up to 4
|
1-4
|
HP Embedded SATA Controller |
| 3.5" SATA Non-Hot Plug Drives | |||
|
Quantity |
Position |
Controller |
|
| 500GB 1.5G SATA 7.2K 250GB 1.5G SATA 7.2K 160GB 1.5G SATA 7.2K |
Up to 4
|
1-4
|
HP Embedded SATA Controller |
| SATA Hot Plug 3.5"
Entry (ETY) Drives NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only. |
|||
|
Quantity |
Position |
Controller |
|
| 160GB 3G SATA 7.2K |
Up to 4
|
1-4
|
HP Smart Array P212/Zero Memory
Controller HP Smart Array P212/256 MB Controller HP Smart Array P410/256 MB Controller HP Smart Array P410/512 MB BBWC Controller |
| 3.5" SATA Hot Plug Drives | |||
|
Quantity |
Position |
Controller |
|
| 750GB 1.5G SATA 7.2K 500GB 1.5G SATA 7.2K 250GB 1.5G SATA 7.2K 160GB 1.5G SATA 7.2K |
Up to 4
|
1-4
|
HP Smart Array P212/Zero Memory
Controller HP Smart Array P212/256 MB Controller HP Smart Array P410/256 MB Controller HP Smart Array P410/512 MB BBWC Controller |
| SATA Hot Plug Midline (MDL) Drives (3.5") | |||
|
Quantity |
Position |
Controller |
|
| 1TB 3G SATA 7.2K 750GB 3G SATA 7.2K 500GB 3G SATA 7.2K 250GB 3G SATA 7.2K |
Up to 4
|
1-4
|
HP Smart Array P212/Zero Memory
Controller HP Smart Array P212/256 MB Controller HP Smart Array P410/256 MB Controller HP Smart Array P410/512 MB BBWC Controller |
| SATA Hot Plug 3.5" Midline (MDL) Solid State Drives | |||
|
Quantity |
Position |
Controller | |
| 120GB 3G SATA 60GB 3G SATA |
Up to 4
|
1-4
|
HP SC40Ge 4-Port Internal SAS
HBA with RAID 0, 1 NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS HP Smart Array P400 Controller HP Smart Array P800 Controller |
| SAS Hot Plug 3.5" Enterprise (ENT) Drives | |||
|
Quantity |
Position |
Controller |
|
| 600GB 6G SAS 15K 450GB 6G SAS 15K 450GB 3G SAS 15K 300GB 3G SAS 15K 146GB 3G SAS 15K |
Up to 4
|
1-4
|
HP Smart Array P212/Zero Memory
Controller HP Smart Array P212/256 MB Controller HP Smart Array P410/256 MB Controller HP Smart Array P410/512 MB BBWC Controller |
| SAS Hot Plug 3.5" Midline (MDL) Drives | |||
|
Quantity |
Position |
Controller |
|
| 1 TB 3G SAS 7.2K 750GB 3G SAS 7.2K |
Up to 4
|
1-4
|
HP Smart Array P212/Zero Memory
Controller HP Smart Array P212/256 MB Controller HP Smart Array P410/256 MB Controller HP Smart Array P410/512 MB BBWC Controller |
|
|
|||
| External Storage | |||
|
Quantity |
Position |
Controller |
|
|
50 Modular Smart Array |
Up to 4 |
External |
HP Smart Array E500/256 MB Controller |
| 60 Modular Smart Array |
Up to 4 |
External |
HP Smart Array E500/256MB Controller |
| Up to 8 | External | HP Smart Array P800/512 BBWC Controller HP Smart Array P411/256 MB Controller HP Smart Array P411/512 MB BBWC Controller |
|
| 70 Modular Smart Array | Up to 2 | External | HP Smart Array P212/Zero Memory
Controller HP Smart Array P212/ 256 MB Controller |
| Up to 4 | External | HP Smart Array E500/256MB Controller
HP Smart Array P800/512 BBWC Controller HP Smart Array P411/256 MB Controller HP Smart Array P411/512 MB BBWC Controller |
|
|
|
|||
| Tape and Disk-Based Backup |
|
NOTE: For a complete listing of compatible tape and disk-based
backup offerings, please visit: http://www.hp.com/go/connect |
|
Position
Supported |
Controller
|
Controller Part Number
|
|
|
HP StorageWorks SCSI Tape Drives, External |
External
|
HP SC11Xe Host Bus Adapter
|
412911-B21 |
|
HP StorageWorks USB Tape Drives, External |
External
|
USB 2.0 Port
|
N/A |
|
HP StorageWorks SAS Tape Drives, External |
External
|
HP Smart Array P212/ZM Controller |
462828-B21 |
|
HP StorageWorks SCSI Tape Automation, External |
External
|
HP SC11Xe Host Bus Adapter |
412911-B21
AH627A |
|
HP StorageWorks SAS Tape Automation, External |
External
|
HP Smart Array P212/ZM Controller |
462828-B21
|
|
HP StorageWorks Fibre Tape Automation, External |
External
|
Please consult the EBS connectivity matrix at: http://www.hp.com/go/ebs
for detailed connectivity information.
|
N/A
|
| HP StorageWorks
RDX Removable Disk Backup System, External RDX160 RDX320 RDX500 |
External | USB 2.0 port | N/A |
|
HP StorageWorks D2D Backup Systems |
External
|
Embedded Network Controller
|
N/A
|
|
|
Power Specifications
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| NOTE: To review typical system power ratings use the Active Answers Power Advisor which is available via the online tool located at URL: www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor |
|
|
System Specifications
|
Power |
||
| ProLiant DL165 G6 Fully Configured | 115V/60Hz | 220V/50Hz |
| Fully Loaded System Input Wattage (W) | 568 | 556 |
| Fully Loaded System Input Current (A rms) | 4.99 | 2.58 |
| Fully Loaded System Thermal (BTU- Hr) | 1939.15 | 1898.18 |
| Fully Loaded System VA (Volt-Amp) | 574 | 567 |
| System Inrush Current with all power supplies loaded (A) | 30 | 30 |
| Power cord requirements | Nema 5-15P to IEC320-C13 | IEC320-C13 to IEC320-C14 |
| NOTE: Power shown is for a fully configured system consisting of (2) CPU, (8) double-sided DIMMs, (2) HDDs, (1) CD-ROM, and (2) PCI cards. | ||
| Power Cord | AF556A | |
| Server Power Cords | One 6' Highline (IEC-IEC)
power cord ships standard NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the NEMA power cord (227099-001) must be ordered separately. If customers require a power cord, they can check the power cord matrix for the appropriate cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix. |
|
|
|
Technical Specifications
| System Unit | Dimensions (H x W x D) (with bezel) |
1.70 x 17.64 x 26.85 in (4.32 x 44.80 x 68.20 cm) | ||
| Weight (approximate) |
Maximum (all hard drives, power supplies, and processors installed) |
37.00 lb (16.78 kg) | ||
| Minimum (one hard drive, power supply, and processor installed) |
30.00 lb (13.69 kg) | |||
| Input Requirements (per 500W power supply) |
Rated Line Voltage |
100 to 127 VAC |
||
| Rated Input Current |
4.99A (at 115 VAC), 2.46A (at 230 VAC) |
|||
| Rated Input Frequency | 47 to 63 Hz | |||
| Rated Input Power |
574W (at 100 VAC) |
|||
| BTU Rating | Maximum |
500W |
1700 BTU / hr (at 100 VAC) 1700 BTU/hr (at 200 VAC) |
|
| Power Specifications |
To review typical system power ratings use the Power Advisor which is
available via the online tool located at URL:
www.hp.com/go/hppoweradvisor |
|||
| Power Supply Output
(per power supply) |
Rated Steady-State Power |
500 Watts (at 100 VAC), |
||
| Maximum Peak Power |
500 Watts (at 100 VAC), |
|||
| Optional High Efficiency Power Supply Specifications | ||||
|
Input Requirements |
Rated Line Voltage |
90-132 VAC, |
||
| Rated Input Current |
9.4 A (at 115 VAC), |
|||
| Rated Input Frequency | 47 to 63 Hz | |||
| Rated Input Power |
1075 W (at 100 VAC), |
|||
| BTU Rating | Maximum |
3070.93 BTU/hr (at 100 VAC), |
||
|
Power Specifications |
To review typical system power ratings use the Power Advisor which is
available via the online tool located at URL:
www.hp.com/go/proliant-energy-efficient |
|||
| Power Supply Output
(per power supply) |
Rated Steady-State Power |
900 W (at 100 VAC), |
||
| Maximum Peak Power |
900 W (at 100 VAC), |
|||
| System Inlet Temperature | Operating |
10° to 35°C (50° to 95°F) at sea level with an altitude
derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above
sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight.
Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may
be limited by the type and number of options installed. |
||
| Non-operating | -30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr). | |||
| Relative Humidity (non-condensing) |
Operating | 10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing. | ||
| Non-operating | 5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing. | |||
| Altitude | Operating | 3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min). | ||
| Non-operating | 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min). | |||
| Acoustic Noise | Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). | |||
| Idle | ||||
| LWAd | 6.82 B | |||
| LpAm | 51.93 dBA | |||
| Operating | ||||
| LWAd | 6.84 B | |||
| LpAm | 51.93 dBA | |||
| Emissions Classification (EMC) | FCC Rating | Class A | ||
| Normative Standards | CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1 | |||
| NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements. | ||||
|
|
||||
| HP 160GB 1.5G SATA
7.2K NHP 3.5" ETY HDD 458947-B21 |
160-GB 7.2K | Capacity | 160,041 MB | |
| Height | 1.028 in (2.61 cm) | |||
| Width | 4.0 in (10.16 cm) | |||
| Depth | 5.787 in (147.0 mm) | |||
| Interface | Serial ATA | |||
| Transfer Rate Synchronous (Maximum) |
1.5Gb/s | |||
| Native Command Queuing | N/A | |||
| Seek Time (typical reads, including settling) |
Single Track | 2.0 ms | ||
| Average | <11 ms | |||
| Full-Stroke | 23.0 ms | |||
| Rotational Speed | 7,200 rpm | |||
| Physical Configuration | Bytes/Sector | 512 | ||
| Logical Blocks | 312,581,808 | |||
| Operating Temperature | 41° to 131° F (5° to 55° C) | |||
|
|
||||
| Embedded SATA Controller | Drives Supported | Up to 4 SATA devices |
| Channels | 4 1.5Gb SATA | |
| Storage Capacity | 3.0TB internal storage | |
| Data Transfer Method | 32-bit/33-MHz PCI bus-master | |
| Maximum SATA Channel Transfer Rate | 1.5Gb/s per channel | |
| Maximum Transfer Rate per PCI Bus (peak) | 266 MB/s per channel | |
| Protocols | SATA | |
| PIO Mode[0-4] | ||
| Cable | SATA | |
| Internal ATA Connectors | Four SATA connectors NOTE: Raid support requires optional slot based raid controller. |
|
|
|
||
| HP 4 Internal Port SAS HBA with RAID | Drives Supported | Up to 4 SATA/SAS drives |
| Channels | 4 | |
| Storage Capacity | 1.8TB SAS, 3.0TB SATA | |
| Data Transfer Method | PCI-Express | |
| Maximum SAS Channel Transfer Rate | 3Gb/s per channel | |
| Maximum SAS transfer rate | 300Mb/sec per port | |
| Protocols Supported | SSP, STP, SMP | |
| Internal Connectors | 1 SAS | |
|
|
||
| Embedded NC7782 dual-port gigabit server adapter | Network Interface |
10Base-T/ |
|
| Compatibility | IEEE 802.3 10Base-T | ||
| IEEE 802.3 1000Base-T | |||
| IEEE 802.3 100Base-TX | |||
| Data Transfer Method | PCI-X | ||
| Network Transfer Rate | 10Base-T (Half-Duplex) | 10 Mb/s | |
| 10Base-T (Full-Duplex) | 20 Mb/s | ||
| 100Base-TX (Half-Duplex) | 100 Mb/s | ||
| 100Base-TX (Full-Duplex) | 200 Mb/s | ||
| 1000Base-TX (Half and Full-Duplex) |
2000 Mb/s | ||
| Connector | RJ-45 | ||
| Cable Support | 10Base-T | Categories 3, 4 or 5 UTP; up to 328 ft (100 m) | |
| 10/100/1000Base-TX | Category 5 UTP (2 Pair); up to 328 ft (100 m) | ||
|
|
|||
| Environment-friendly Products and Approach | End-of-life Management and Recycling |
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go
to: http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will
be recycled, recovered or disposed of in a responsible manner. |
|
|
||
| © Copyright 2009 Hewlett-Packard
Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. AMD, Opteron, and Hyper-Transport are trademarks of AMD Corporation in the United States and other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less. |