Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
HP.com home

HP Parallel 3 Phase Uninterruptible Power Systems (UPS RP36000/3)

Specifications
» 

Rack & Power

» HP Parallel 3 Phase UPS
Components
» Rack-Mountable UPS
» Power management
» UPS options
» UPS software
» ProLiant storage
Tools
» UPS Sizing Tool
» Server power calculator
» Power cord matrix
» New products
» Retired products
» Special promotions
» Site map
announcing new products
What's new in IT? HP Virtual IT Center
IDC Business Value of Virtualization
 
Content starts here

The efficiency, modularity, and redundancy give the HP 3 Phase Parallel UPS the ability to grow with your data center needs while reducing the energy costs and cooling needs of traditional large uninterruptible power systems.

Product information

» Overview & Features
» Key benefits
» Specifications
» Questions & Answers

Specifications

RP36000/3 (base unit)
RP12000/3 (optional UPS expansion module)
General Characteristics
Power Rating (non-redundant)
36KW / 36KVA
12KW / 12KVA
Efficiency
>97%
>97%
Power rating N+1
24KW / 24KVA
60KW/60KVA maximum configuration
Efficiency
>97%
>97%
Heat Dissipation
<1113W/3800 BTU/hr. at 100% rated load
<371W/1266 BTU/hr. at 100% rated load / UPS Module
Cooling Fan cooled, temperature microprocessor monitored; front air entry, rear exhaust
Altitude Before Derating
1000 meters (3300 ft. ASL)
Input Characteristics
Input Connections
Hard wired from facility power
Connects to power bus bar
Input Voltage
208 Vac and 400 Vac models
Voltage Range
208V model: 180 to 265 Vac (NA)
400V model: 311 to 519 Vac (INTL)
Frequency Range
50 or 60 Hz, ±5 Hz
Input Current Distortion
<5% with IT loads (PFC power supplies)
Input Power Factor
>.99 with IT loads (PFC power supplies)
Inrush Current
Load dependent
Input Requirements
Hardwired, 208VAC Three-phase, Wye
36KW maximum require 150 amp service (NA), 75 amp service (INTL)
48KW maximum require 200 amp service (NA), 100 amp service (INTL)
60KW maximum require 225 amp service (NA), 160 amp service (INTL)
Bypass Source
Same as input, (single feed)
Generator Compatibility
Fast sync slew rate for generator synchronization
Output Characteristics
Output Connections
Hardwired from power bus bar or uses optional Output Modules
Connects to power bus bar or uses optional Output Modules
Rated Output Voltage
208V model: 180 to 255 Vac, Ph to Ph
400V model: 180 to 240 Vac, Ph to N
Output Configuration
Three-phase, Wye
Output Frequency (nominal)
50 or 60 Hz auto-detection on startup
Frequency Regulation
0.1 Hz free running
Load Power Factor Range
Lagging: 0.7
Leading: 0.9
Total Output
Voltage Distortion
<3% with IT loads (PFC power supplies)
<5% non-linear or non-PFC power supplies
Battery Characteristics
Battery Type
Maintenance-free, sealed, valve-regulated lead acid (VRLA)
Battery Runtime (Internal)
>5 minutes at 100% load
Battery String Voltage
240 Vdc
Battery Test
Automatic battery test standard
Manual battery test from front display
Battery Recharge Profile
Enhanced Battery Management three-stage charging technology
Battery Cut-off Voltage
Variable from 1.67 VPC at <5 min. runtime to 1.75 VPC at >90 min. runtime
Battery Low Condition
Announced with alarm
Extended Battery Capability
Yes, add up to four additional 3U battery enclosures (~34 min at 100% load,
>1 hour at 50% load)
Physical Characteristics
Dimensions (HxWxD)
UPS

78.7 x 39.691 x 24 in
2000 x 1015 x 597 mm
(HP 10000G2 42U Rack)
10.3 (6U) x 17.4 x 26.0 inches
267 x 442 x 660 mm
Total Chassis Weight
without batteries or
electronics

Total Chassis Weight
with batteries or
electronics
653 lb. (396 kg.)



1274 lb. (578 kg)

100 lb. (46 kg)

 

307 lb. (140 kg)
EBM Weight
170 lb. (77 kg)
Communications and User Interface
Software Compatibility
UPS ships with HP Power Manager software
Control panel LCD
Two lines by 20 characters
Four menu-driven interface buttons
Four status at a glance LEDs
Multi Language
English standard
Configuration Changes
User capable, firmware auto configures
REPO Port
Yes
Warranty & Serviceability
Warranty
3 years parts, 1 year labor, 1 year onsite (Power bus bar is 3 years parts only)
Serviceability Features
Hot-swappable batteries
Hot-swappable electronics module
Automated internal maintenance bypass
Auto-configure firmware
Flash firmware upgradeable
CarePacks
Installation CarePacks available for additional RP12000/3 UPS Modules The RP36000/3 must be installed by an electrical contractor.
Certifications
Safety
208V model: UL1778, cUL
400V model: CE
EMI
208V model: FCC Part15 Class A
400V model: EN62040-2 Class A
Surge Protection
ANSI C62.41, Cat B-3
Hazardous materials (RoHS)
EU Directive 2002/95/EC Category 3 (4 of 5)
Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 2008 Hewlett-Packard Development Company, L.P.